USB 3.0 ports will not be detected / working after fresh Windows 7 install (dv6-6184)

Similar Questions

• Envy of HP Dv7 - 7223cl Windows 7 Ultimate 64 - Bit: USB 3.0 Ports will not work.

  When I plug my mouse into one of the USB 3.0 ports, Windows does not sound has indicated that it is connected. I did a clean reinstall there two days and most of my drivers installed, but they do not work. A store local deleted Windows 8 PC and installed Windows 7, a few weeks ago, and USB 3.0 ports was working at this time, so drivers exist. After having some problems, I decided to do a clean reinstall of Windows 7, which has deleted all my drivers and I was able to reinstall most of them, but USB 3.0 ports has not worked since and still not working. I looked on the internet, but I couldn't find the right one. I looked in the management system and found that two devices: PCI Device and SM Bus controller are shown with a yellow sign. After looking under properties, I found that the two do not have their drivers installed (Code 28). Anyone know where to find the drivers for this problem?

  Nevermind, it works now. I just had to uninstall and reinstall all components of AMD. Thanks for your information!

• Officejet OfficeJet Pro 8600 Plus: Pro 8600 more will not scan from touchpad after updating Windows 10

  After a Windows 10 update, my printer will not touchpad analyze. It will scan the troubleshooting utility. I unplugged and reset without success. I have updated to the latest version of the HP software for the printer. What else can I try?

  Hello

  You can try to install from the link here:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/model/4323647

  Before installing the HP software above, please uninstall your previous version first.

  During installation, select the type of standard or recommended installation when you are prompted by the installation software. If you choose a minimum installation, read the description of each component software with caution to avoid the unintentional loss of functionality of the printer.

  You can check via "Control Panel" > "Hardware and sound"-> "Devices and printers"-> under "printers and faxes". There will be a green check mark is marked to your printer if it connected successfully.

  Hope this helps you.

• stream HP 11 x 360: Touchscreen on stream 11 x 360 does not work after 10 windows clean install

  I did a clean install of windows 10 on my HP 11 x 360 stream, and now the touchscreen does not work. Under system, it says 'no pen or touch input' and there is no driver touch screen not listed under HID in the Device Manager. It worked when windows 8.1 has been installed and it still works in the BIOS. None of what follows has worked previously:

  reset

  several windows updates

  several updates using HP support assistant

  looking through the list of 8.1 windows HP drivers (apparently not all list a touch screen driver)

  looking through the list of drivers for windows 10 HP that was recently added.

  Either by the way, I was about to Flash the BIOS when I noticed that the version on the Web site is f2, and mine is f4. I don't know what that means. I end by flashes, however.

  I remember seeing what I thought, he was a pilot of the touchscreen when you look under programs and features in windows 8.1 before the upgrade. I think it was called magic something or other...

  Microsoft Web site indicate that windows touch support in the oven, so I don't know why it is a problem.

  Update:

  I installed the windows version 8.1 of 'Serial IO driver without connected sleep Support Intel' and he's got the touch screen works, but the accelerometer does not always work.

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

  Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore
  

  Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.

  How to cancel?  Pls help.   TKS, Ron Moore

  Hi Ron,

  1. how many printers is connected to the computer?

  2. did you of recent changes on the computer?

  3. what happens when you try to change printer (LPT1) port

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2

  If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure thatAutomatic is selected.

  (e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• Firefox will not open at all, after the last update (13.08.2015).

  After the update (40.0.2 @ 13.08.2015) just used Firefox open. The process is visible in the Task Manager, but does nothing. no window. JUST. NOTHING. It works only in safe mode or when ran as administrator. I tried other computers from home too. Same thing.

  How to fix?

  Try a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• Windows will not uninstall Java 6.24, so I can install the earlier version

  I get a screen that says "the component you are trying to use is on a CD-ROM. Insert the Pogo games" Java 6 Update 24 disc and click OK "will not play, the screen says I have to install Java.". Java said that it is installed, you want to reinstall? I click Yes and get the same screen as shown above.

  Hello

  Refer to this article for more information on how to remove old versions of Java to your computer.
  http://www.Java.com/en/download/FAQ/remove_olderversions.XML

  Once you have removed the old version (s), download and install the latest version of Java.

• The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install.

  * Original title: Microsoft kb3134214

  The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.

  Hi Nathalie,.

  Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.

  I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:

  "I restarted my computer.

  "then stop it showed that he was trying to install the file again

  "I hit the reset button on my machine.

  "My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.

  "I chose boot normally.

  "Somewhere during the start-up, something installed or flashed a message

  "My system automatically restarted by itself.

  "On my screen, my computer displays a message saying it was set up my system.

  'My computer restarted again

  "Back to my login screen, I had a repeat of the previous message from my computer's configuration.

  "After that over, I arrived at my office

  "I've manually run Windows Update

  "After Windows Update, I checked the files available, disabled the original file in question and click the button install.

  "These files correctly installed and gave a message requesting to restart."

  "I rebooted my system manually.

  "Back in my office, I manually tried to install the file in question.

  "It gave me a message that it was already installed.

  How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.

  You can mark my question.

  Thanks for your help,

  Robert

• Microsoft windows fax and scanning will not start on my computer laptop windows 7

  Microsoft windows fax and scanning will not start on my computer laptop windows 7

  Original title: fax and scanning

  Press Windows key + R

  Type: optionalfeatures.exe

  Press enter

  Expand Print and Document Services

  Uncheck the fax and scan Windows

  Click OK

  Reboot if prompted

  Press Windows key + R

  Type: optionalfeatures.exe

  Press enter

  Expand Print and Document Services

  Check fax and scan Windows

  Click OK

  Reboot if prompted

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• First will not open my project after that I have record in SpeedGrade via Direct link

  First will not open my project after that I have record in SpeedGrade via Direct link

  Last night, I installed all the updates of CC, everything went well.

  All day I was doing the color correction in SpeedGrade to PremierePro project via direct link.

  After I finished, I wanted to go back to first to make an export (my manager was waiting for a sample) only, when the first attempted to connect to the project I worked on SpeedGrade, could not open!

  She the Saturn: "this project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version.

  Before panic to my Director of waiting, I've saved every look I did in SpeedGrade as an individual LUT I could manually apply in an earlier version of the PremierePro project. But it took a long time and it's may not be a long-term option.

  What can be the problem between saving in SpeedGrade and then back in PremierePro?

  I PremierePro CC 2015 v. 9.02 (6) and CC SpeedGrade 2015 v. 2015.1

  I'm working on MacBook Pro Retina display 15'.

  Simple... you SpeedGrade 2015.1 (9.2) and PrPro 2015.0.1 (9.0.1). They don't 'work' together.

  You must get your PrPro up to 9.1, 2015.1 release. If your desktop application Adobe CC is not show your 'eligible' for the upgrade PrPro, sign out of it, then back in... that often useful. If this isn't the case, you may need to use the soft Cleaner CC Adobe to remove the application from Office CC & then reinstall it and reconnect.

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Neil

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?