Aspire port speakers M5 / jack does not work :(

Similar Questions

• My Dell XPS 15 audio Jack does not work.

  Hello, my new Dell XPS 15 audio Jack does not work. I just got this thing out of the box.

  I have updated the drivers and stuff, which doesn't seem to be the issue.

  I tried several headphones as well, the helmet is not the issue.

  I've isolated to this: when I plug in the headset, nothing happens. If I ask about 15-20 lbs of pressure, forcing the connector of headphones into the socket as hard as possible, the cell begins to recognize and the helmet works. As soon as I let go of the connector, the laptop will behave as if the device was disconnected.

  What should I do?

  rsidhu89

  What should I do?

  Hello. Your options are to contact technical support to schedule a repair, or return it for a refund or Exchange if you are still in the short return period (twenty one days from the date on the invoice if you got from Dell).

• superior Headphone Jack does not work

  My office h8-1039 (W7 Home Premium) has a Jack headphone and microphone on the top and the back of the PC.  On the top of the page game of catch, the helmet stopped workng, the microphone still does, so I have to use the headphones for talking me through the speakers.  The rear set could be used, but very annoying, as you can imagine.  Is it possible to determine why the upper earpiece does not work?

  Thank you

  Mike

  Hello

  I think you have a problem hardware or internal wiring connection problem if Device Manager shows no error and audio divers are properly installed.

  You have no audio output back so the audio chipset on the motherboard is good.

  Jaco

• Inspiron 5520 Headphone Jack does not work

  I have a Dell Inspiron 5520 and his works well, except the headphones does not work. I installed the drivers from the dell support site. also tested using the Dell Diagnostics utility, by pressing F12 and selecting from the menu, I don't see the 'custom' option which is indicated in this page (step 4):http://en.community.dell.com/support-forums/laptop/f/3517/p/19351382/19768710.aspx

  the test turns on and at the end there is a radio button to test the Audio, which plays several tones through the laptop speakers. When I plug in the headphones, I have no sound in the headphones and more tones are played through speakers for computer only. Also I have heard no "instrumental piece of music complete with battery" according to step 2 in the above link.

  Is this a hardware problem? Please guide me further.

  Hi Technoraty,

  Whenever you connect the headphones to the computer, you should get a notification that the headset is connected. If the sound comes only through the internal speakers, the issue may be with the audio port. I suggest you to connect other headphones or external speakers and check. If the problem persists, hardware may need to be replaced.

  

  Please share the results so that I can help you further.

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• Magic jack does not work on Vista

  Please help, I have tried everything with the Magic Jack support team and has even received a replacement and it does not work with windows.
  What can I do to fix this and get my Magic jack to work?

  Hello, Ray

  I'm moving your post on the Windows Vista Hardware forum.

  You may need to be upgraded, refer to the Windows Vista of the MagicJack Customer care site section: http://www.magicjack.com/2/customercare.asp

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I restored my computer XP now magic jack does not work

  E-mail address is removed from the privacy * Maic jack does not not after xp restore

  "OIL of GUTS" wrote in message News: * e-mail address is removed from the privacy * .com...

  E-mail address is removed from the privacy * Maic jack does not not after xp restore

  You have reinstalled the program MJ?  The MJ support would need to be contacted for service with their product and when I contacted them with a XP problem, they have been more helpful in getting it resolved.

• Laptop speakers Studio 1749 does not work after update to Windows 10

  I've updated to 10 Windows in Windows 7 and I have problems with my speakers. They do not work but the headphones work. Anyone know how to fix this?

  Hello. Same answer as one delighted given. Here is a link to the driver IDT audio R260553 Studio 1749. If the driver will not install or run correctly, use the compatibility mode:

  1. download and save the driver to your desktop.
  2. double-click the new icon on the desktop to extract (unzip) the files of the driver.
  3. the wizard of the extractor will create a new folder for the driver files. It will be located at the "c:\dell\drivers\xxxxxx". Note the exact location that the wizard creates.
  4. If the driver begins to install automatically, stop (cancel) installation.
  5. search for the driver files on the hard drive (the location you noted).
  6. find the file "setup.exe".
  7. right click on setup.exe to open the context menu.
  8. Select Properties.
  9. Select the Compatibility tab.
  10. check the box "run this program in compatibility mode for"... Win7.

• Aspire V3-472PG touch screen does not work all of a sudden

  Hello

  I bought my acer aspire 472PG-V3-761R (with touch screen) a few months before. Recently, I noticed that the touchscreen wasn't all of a sudden. I have already read and tried some troubleshooting tips from the forums and on the internet, but still does not.

  I saw in the forum acer on how to disable the touch screen to see that if it has been disabled, while they inspected the Device Manager - Human Interface devices, there is no touch screen driver compatible HID?

  I've also updated my windows windows 8 to 10 about two weeks after I bought the laptop and the touch screen worked well after the update until this week.

  Please help me to solve the problem and solve it. Was it the update of windows 10? I have a warranty from the store where I bought it, but I still have to inform and bring it to the store.

  Thank you

  There seems to be a driver problem Windows 10, but I've seen a few that have the problem in point 8.1.

  If you have not done so, update the bios here. http://www.Acer.com/AC/en/us/content/drivers

• Why my iPhone 5 Headphone Jack does not work?

  I tried to fix it but I can't, I'm running on ios 9.3.2 and my Siri does not collect my voice. If you know what is Anseer PLEASE TELL ME!

  Get a flashlight and clean up any debris, lint, etc., from the plug headphones and try again. Have you tried another set of headphones? If this is not the case, try this. If nothing like that works you will need to get it repaired.

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• Headphone Jack does not work

  My headset is not working when I plug my headphones, but the set of speakers very well I just updated for you guys can so help me

  Hi Kevin

  I have the fix for my laptop, I want you to pass this information to anyone who has the same problem I did was uninstall the Realtek driver and after that I restarted my pc and Microsoft Audio driver fills the void for Realtek absence now after that did what ever brand or model that they have , they have to go to one site to download the correct driver for it pc and if they hear a static noise then they have official fix that issue please pass this information to as many people as you can and thank you for helping me

• Installed FMS4 in a different port number, but his does not work...

  Hi... Stephanie personally me if this question was asked earlier. During the installation of FMS, I entered the 1 935 100 instead of 1935,80 normal port numbers as I have wamp in my port 80 by default, but when I try to call the url localhost, both of the port (http://localhost:100 & http://localhost:1935) do not work. Please help me how to solve this problem.

  Kind regards

  Bala

  you try to connect to port 1935 and 100 on http port, you must connect to them via rtmp... .abolish port 100 fms.ini because flash player don't know how to connect rtmp over http using anyway. I personelly not have 1935 located in a development environment, because I have a webserver on the same machine runnning. Can I serv connected .swf apps over the net without a problem, that you only need to set port 80, when the user specifically blocks port 1935 with a firewall (rarely the case). so, since you are not in a production environment omit the port 80 and 100 of the fms.ini and connect through the rtmp Protocol, and everything will be ok.

• Acer Aspire E1 - 572 G Bluetooth does not work after update to 8.1 Windows

  After the upgrade to Windows 8.1 x 64 bit, my bluetooth does not detect and cannot be detected by other devices (my laptop). In Device Manager, I have NO yellow exclamation points with triangles, when I search automatically updates, windows says everything is up to date (see photo below), so everything looks very well and running. Bluetooth is on, but after research found no devices (even if the phone is also activated bluetooth). Could someone help me please? Thank you very much.

  

  Uninstall the BT adapter, right click on the Device Manager and select uninstall.

  then restart and install this drivers in support of Acer:

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Atheros_10.0.0.263_W81x...