Aspire purrs mobile V5 as a cat when it goes off. Nothing to worry?

Similar Questions

• You need a light behind your apple mobile, as behind the macbook, it's going to be awesome. Think you want to

  You need a light behind your apple mobile, as behind the macbook, it's going to be awesome. Think you want to

  Also, it would be nicer if the behind apple iphone the light is turned on when we use it.

• 1415 CM cold Color mfp goes off line when a pc Windows 8 joined the Group

  I have a network that uses a Sprint MiFi unit as the access device and router. My printer the CM1415 worked for two years with reliability when my old PC is connected A Toshiba laptop with Win Vista 64 bit and a laptop from Sony with Win 7 Ultimate. My nexus device 7 can even connect to the internet without problem. I recently purchase a Lenovo all in one with Windows 8 every time that this machine is running the printer is offline, and even if it is reset it goes off line almost immediately. The Working Group on all of the PCs is the same, and all of them continue to be able to access the Internet. When I disable the machine Win 8 and run the network Test the printer resets and works very well.

  Any ideas out there

  Hey Mrstenter.  My problem is solved, here's what I did to solve

  1 mobility Homegroup in the Machine of Win8 (no effect)
  2. change workgroup in network on behalf of our working group (no effect)
  3 reset the device MiFi Sprint factory and recreated the network using a different SSID and a both reconnected the old PC and reconfigured the network connections and the printer. (everything worked as before)
  4 added Win 8 PC and connected and the printer is still alive and active for all. HP said that the Protocol of security WPA-2 was not supported but my Sprint MiFi would not allow me to reset and it worked before

  You may not have gotten the Jist but the printer has worked for 2 years on the network before. I just added the Windows 8 PC that broke the connection for other devices on the network whenever it was turned on.

  WPA2-psk might not be supported, but it worked and doesn't work always, and until I physically change my Sprint MiFi, I have no other options maybe it's a hardware failure, but it is what it is.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• My selected themes disappear when I turned off the computer, I have to add them when I turn the computer back on. I made sure that it is set to allow the modules.

  Just in the last week or so, this has happened. I had several themes to select from, all of them are listed is no longer in the list with the exception of the default theme of list drop-down appearance. Yesterday I made I'm fixed to allow add-ons. It was the same story this morning, the appearance was back to default and my themes had disappeared. If I stay connected to the internet my themes remain the same. I have no problem with the preview of themes they will not just stay put when I turn off my computer. This is the only problem I have encountered since I've been using Firefox.

  You will need to check the line user_pref ("lightweightThemes.usedThemes", < pref data >) to see is something changed in the data stores installed light themes and compare this line in the current prefs.js file with the corresponding line in the backup of the prefs.js.

• My ipod video 5th generation won't play of smart playlists in order with 12.4 itunes, itunes can not remember how to sort things either. When you going to solve the problem?

  My iPod video 5th generation won't play of smart playlists in order with 12.4 iTunes, iTunes can not remember how to sort things either.

  When you going to solve the problem?

  Can I do to solve this problem?

  Use the view of songs to set the order you want. Right-click on the name of the playlist in the left sidebar, and then select copy to Play Order in the context menu. Sort the list on the left most column of numbers, or use view > sort by > order of Playlist. Device synchronization.

  TT2

• Satellite P855 - 10G is low on battery power, even when it is off

  Hello world

  I bought the Toshiba Satellite P855 - 10G, but I m terrified because he is low on battery power, even when it is off...
  Anyone know how I can fix the problem?

  Best regards
  Igor Tarelho

  Hello

  Access the BIOS and disable options like: wake-up on LAN and keyboard.
  In Toshiba HW Setup I should disable the USB Sleep and Charge feature as well

  The two options enabled to discharge the battery, even if the device is OFF

• Should I turn off my Apple TV 3 when I turn off my TV?

  Should I turn off my Apple TV 3 when I turn off my TV?

  Honestly, no! There is really no need because it stops automatically after an hour of idle time.

  For permanently off it just to remove the power connector!

  There is also a setting in the Apple TV to control when he sleeps under general settings.

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• Compaq CQ5210F desktop: when I turn off my desk, I lose my date settings and clock

  When I turn off my computer's power supply, I have now lost all my memory date and time. I just change my cmos battery. Still nothing. Windows 7 64-bit. The new battery would be bad?

  Hi there @Danpurtell
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that your computer is lost the date and time every time that you shut down the computer, and you have replaced the CMOS battery. I'm happy to help you with this.

  It is possible that the battery is bad. Install yourself?

• Satellite A500-138 - battery gets smaller when it is off

  Hello!

  I recently bought the A500-138 and I noticed that if the computer turns off for more than half a day the battery power is lower.
  For example, after 2 days when the computer does not work at all the battery starts to 88%.

  It it normal or there is a problem with the battery?

  Thank you.

  Hello!

  I n t have any new Satellite A500, but on my Satellite A300, I got the same problem battery gets low when it was off.

  After searching a bit here in the forum, I founded that I disable the Wake-On-LAN feature in the BIOS. In addition, I recommend disabling the function USB Sleep & Charge you can find also in the BIOS.

  It works for you too?

  Good bye

• When printing printer off

  Might be a stupid question, but if I send the mail to print when the printer is turned off it print when the printer is running back, or should it be at work who beats a little point to call remote printing

  Hello

  Print jobs sent to the printer when it turned off will not be printed of course, but the print job will remain on the server until 24 hours. the task will be printed on the printer and connected to the network during this period:

• the game is loading, but when he goes in the module of character it closes

  I am trying to load some old software on a windows machine 7. The installation seems to have been very well.
  But when I run the program it will load, display the program for a few seconds then close. I checked
  for viruses and spyware. I unloaded and reloaded software several times. Disable virus protection
  software installation. Which none did any difference

  I was runnig neverwinter Platnum and because microsoft updates failed, my game is loading, but when he goes into the module of character it closes and says that microsoft is closing prgram because it does not? All the answers?

  tonkatnrus,
  If you are still having this problem then, let us know what version of Windows 7 you have, and your basic system specifications.  I suggest to perform a clean boot , and then test the game.  Also, let us know what updates failed and this error code you received.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a aspire 5517 who will not, start seeing power turns on but nothing else happens.

  I have a aspire 5517 that won't initialize power light turns on, but nothing happens.  I tried to connect an external monitor, but it still doesn't work.  All my stuff is on this computer and I need to save at least. Help!

  Hello..

  You can try to remove the battery, then connect only the power adapter ON the computer and check if you are able to start the computer.

  In order to return the data take the hard drive on the computer startup and slave with another computer and you will be able to transfer the files from the hard drive of your computer to another.