ASR 1002 ios - xe update failure, physmap flash, INVALID_BOOT_TRACE_CFG, Confreg corrupt errors

Not clear yet if all these problems are related.  Main question is this attempt to update asr1000rp1 - advipservicesk9.03.03.00.S.151 - 2.S.bin asr1000rp1 - adventerprisek9.03.13.05.S.154 - 3.S5 - ext.bin is a failure.  Check /md5 result for the new image matches the hash of Cisco.  New start of configuration lines are ignored, and he returned to running the default image.  The long series of physmap-Flash errors occur after a reload regardless of if an update was attempted.  Do not have these problems on our older IOS routers, any help with this beast is appreciated.

Current config before the update attempt:

ASR #sh worm
Software Cisco IOS, IOS - XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.1 (2) S, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, March 24, 11 23:32 by mcpre

ROM: IOS - XE ROMMON

System return to the ROM to reload
System image file is "bootflash:/asr1000rp1-advipservicesk9.03.03.00.S.151-2.S.bin".
Reload last reason: reload command

Cisco ASR1002 (2RU) processor with 1706515K / 6147K bytes of memory.
4 gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
K 4194304 bytes of physical memory.
7757823K bytes of eUSB flash bootflash:.

Configuration register is 0 x 2101 (will be 0xFFFF at next reload)

ASR #sh run | start of the Inc.
boot-start-marker
boot-end-marker

Config who wrote during the attempt to update:

ASR #sh run | start of the Inc.
boot-start-marker
start the system flash bootflash:asr1000rp1 - adventerprisek9.03.13.05.S.154 - 3.S5 - ext.bin
start the flash bootflash:asr1000rp1 - advipservicesk9.03.03.00.S.151 - 2.S.bin system
boot-end-marker

ASR #dir bootflash:
Directory of the bootflash: /.

11 drwx 16384 January 11, 2012 09:39:11-07:00 lost + found
680065 drwx 4096 11 January 2012 09:40:13-07:00 theme
809601 drwx 4096 11 January 2012 10:12:58-07:00 core
599105 drwx 4096 7 March 2016 19:47:20-07:00 .prst_sync
615297 drwx 4096 11 January 2012 10:13:07-07:00 .rollback_timer
-rw-13 0 11 January 2012 10:13:41-07:00 tracelogs.606
566721 drwx 8192 7 March 2016 19:52:46-07:00 tracelogs
14 - rw - 304628024 November 15, 2012 08:10:57 - 07:00 asr1000rp1 - advipservicesk9.03.03.00.S.151 - 2.S.bin
12 - rw - 370973308 March 7, 2016 16:06:12-07:00 - asr1000rp1 - adventerprisek9.03.13.05.S.154 - 3.S5 - ext.bin

ASR #reload
Proceed to recharge? [confirm]

* 02:55:15.131 Mar 8: % SYS-5-RELOAD: reload requested by admin console. Reason for reload: reload the command.
Mar 7 19:55:28.998 R0/0: % PMAN-5-EXITACTION: process manager is out: output of process with the top-up chassis code

System Bootstrap, Version 12.2 XNC SOFTWARE (33r), LIBERATION (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.

Content of the SPD PROM slot 0
8008080E 0A 614800 05304502 82080800 0C 083801 1005033D 5050603C 1E3C2D01
20271017 3C1E1E00 063C7F80 00000000 00000000 00000000 00001247 18220F00
calculated chksum = 00000047; stored at chksum = 00000047

Content of the SPD PROM slot 1
8008080E 0A 614800 05304502 82080800 0C 083801 1005033D 5050603C 1E3C2D01
20271017 3C1E1E00 063C7F80 00000000 00000000 00000000 00001247 18220F00
calculated chksum = 00000047; stored at chksum = 00000047

Compensation of bss... done

CPU version: 2.1.x
CPU Clock freqs: sys:100000000 CCB:400000000 Core: 1400000000
local: 50000000 i2c:97656 MII:1785714
CPLD Version: 23 (MM/DD/YY): 10/01/08 ASR1002-RP1 Slot: 0

Current running image: Boot ROM0
Last reset cause: LocalSoft
Last reset to: kill Mar 08 02:55:47 UTC 2016

Confreg is damaged, using the default value 0x8000

Correction of the primary nv_flash

Platform ASR1002-RP1 4194303 KB main memory

start-up: unsupported flash "boot device.
AutoBoot: initialization failed, reboot...

System Bootstrap, Version 12.2 XNC SOFTWARE (33r), LIBERATION (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.

Current running image: Boot ROM0
Last reset cause: LocalSoft
Last reset to: kill Mar 08 02:56:07 UTC 2016

Platform ASR1002-RP1 4194303 KB main memory

start-up: unsupported flash "boot device.
AutoBoot: initialization failed, reboot...

System Bootstrap, Version 12.2 XNC SOFTWARE (33r), LIBERATION (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.

Current running image: Boot ROM0
Last reset cause: LocalSoft
Last reset to: kill Mar 08 02:56:28 UTC 2016

Platform ASR1002-RP1 4194303 KB main memory

No image found valid boot
Attempt to autoboot final of the default boot device...
Found tracelogs.606
Image size 0 inode num 13, bks cnt 0 blk size 8 * 512

Size of the boot image = 0 (0x0) bytes
Find asr1000rp1 - advipservicesk9.03.03.00.S.151 - 2.S.bin
Image size 304628024 inode num 14, bks cnt 74373 blk size 8 * 512
#############################################################################

Size of the boot image = 304628024 (0 x 12284138) bytes

Missing or illegal the ip address for the DEFAULT_GATEWAY variable
Background basket using central macaddr
IP address missing or illegal for variable IPAddress
Missing or illegal the ip address for the IP_SUBNET_MASK variable
Structure of rev 0 package header detected
SHA-1 hash calculated...
validate_package: SHA-1 hash:
calculated 8a599bb4:81792bce:6e6023aa:c61924cb:1 c 909603
8a599bb4:81792bce:6e6023aa:c61924cb:1 expected c 909603
Image posted

Software Cisco IOS, IOS - XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.1 (2) S, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, March 24, 11 23:32 by mcpre

Cisco ASR1002 (2RU) processor with 1706515K / 6147K bytes of memory.
4 gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
K 4194304 bytes of physical memory.
7757823K bytes of eUSB flash bootflash:.

User access audit

User name:
%Username: timeout expired.
User name:
%Username: timeout expired.
User name:
* 8 Mar 03:01:56.211: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:01:56.211: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d27d4 bytes write failed. return - 62, retlen 44
* 8 Mar 03:01:56.915: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:01:56.915: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:01:56.915: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:01:57.649: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:01:58.362: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:01:58.362: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:01:58.362: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:01:59.106: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:01:59.106: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:01:59.106: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:01:59.841: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:00.557: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:00.557: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:00.557: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:01.331: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:01.331: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:01.331: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:02.092: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:02.092: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:02.092: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:02.938: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:02.938: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:02.938: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:03.851: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:03.851: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:03.851: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:04.854: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:04.854: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:04.854: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:05.735: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:05.735: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:05.735: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:06.545: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:06.545: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:06.545: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:07.276: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:07.276: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:07.276: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:08.006: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:08.006: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:08.006: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:08.752: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:08.752: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:08.752: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:09.479: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:09.479: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:09.479: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:10.184: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:10.184: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:10.184: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:10.883: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:10.883: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:10.883: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:11.652: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:11.652: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:11.652: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:12.383: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:12.383: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:12.383: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:13.095: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:13.095: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:13.095: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:13.820: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:13.820: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:13.820: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:14.556: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:14.556: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:14.556: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:15.269: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:15.269: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:15.269: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:16.031: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:16.031: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:16.031: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:16.743: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:16.743: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:16.743: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:17.473: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. XStatus = c4, status = c4
* 8 Mar 03:02:17.473: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62, retlen 0
* 8 Mar 03:02:17.473: % IOSXE-5-PLATFORM: R0/0: core: not marking not space to 0x001d283c as dirty, because flash driver returned zero retlen
* 8 Mar 03:02:18.192: % IOSXE-3-PLATFORM: R0/0: kernel: physmap-flash. 0: not ready chip for writing to the buffer. Xsta = c4
* 8 Mar 03:02:18.192: % IOSXE-5-PLATFORM: R0/0: kernel: 104 to 0x001d283c bytes write failed. return - 62,
* 8 Mar 03:02:18.192: % IOSXE-5-PLATFORM: R0/0: core: do not mark out space to 0x001d283c as dirty, because teturned retlen zero

First, I would check the versions ROMMON ('see the platform') and upgrade to the latest available - 12.2 XNC (33r) is in any case much too old for IOS XE 3.13 S, and most recent ROMMONs also fix bugs.

Second, I'd be curious to know what "fsck bootflash:" said...

Tags: Cisco Network

Similar Questions

  • Update of IOS on ASR 1002 X

    How to upgrade IOS on ASR 1002 X?

    FROM or set the initialization variable and reload. It is autonomous only pass no available redundant peer.

    Current version: asr1002x - universalk9.03.07.03.S.152 - 4.S3.SPA.bin

    Target version: asr1002x - universalk9.03.07.05.S.152 - 4.S5.SPA.bin

    License level: adventerprise
    License type: Permanent
    Then reload license level: adventerprise

    See the redundancy
    Redundant system information:
    ------------------------------
    Available system availability = 1 year, 14 weeks, 4 days, 12 hours, 59 minutes
    Failovers system known = 0
    Chess = 0 pending
    Last reason passage = none

    Material = Simplex Mode
    Configured the redundancy Mode = not redundant
    Redundancy of functioning mode = not redundant
    Maintenance = disabled mode
    Communication = down the reason: failure

    Current processor information:
    -------------------------------
    Active location = slot 6
    Current software status ACTIVE
    Operating time in current state = 1 year, 14 weeks, 4 days, 12 hours, 59 minutes
    Image Version software = Cisco IOS, IOS - XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.2 (4) S3, RELEASE SOFTWARE (fc1)
    Technical support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Updated Saturday, April 19, 13 13:40 by mcpre
    BOOT =
    Configuration register = 0 x 2102

    Peer (slot: 7) information is not available because it is "DISABLED" State.

    Kind regards

    Ramanantsoa Somiyani

    If he is autonomous, simply change the variable initialization. It does not need licensing, it will always time out that there is no redundancy.

  • I can't download Netflix. I can download/update of other applications.  I checked my limitations and my iOS is updated.  I tap on the little cloud to download, a circle flashes briefly then reappears the cloud with the arrow.  I rebooted and hard r

    I can't download Netflix. I can download/update of other applications.  I checked my limitations and my iOS is updated.  I tap on the little cloud to download, a circle flashes briefly then reappears the cloud with the arrow.  I rebooted and restarted hard.  Netflix working on other Apple devices.

    Try to download to your computer, iTunes then sync it to your device.

  • Satellite A110 - 180 PSABOE - Bios update failure

    Hello.

    I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

    If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

    Thanks for your help.

    > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

    To me, it looks like the BIOS update procedure has no
    I'm afraid you have no other alternative besides contacting an ASP using m.

    It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

    I would recommend contacting the local ASP in order to solve this problem

  • The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

    Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

    Hi Bloggsj,

    Thank you for using communities Support from Apple.

    I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

    If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

    1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
    2. Find iOS 9.3 in the list of applications.
    3. Press on iOS 9.3, then remove the update.

    Now you can go to settings > general > software update and download the latest iOS update.

    If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

    Take care.

  • Requirements of LDAP for SSL - VPN on ASR 1002

    Hi all

    I intend to implement SSL - VPN (AnyConnect) on a rputer ASR 1002 running IOS - XE Software Version 15.1 (3) S2.

    I need to use LDAP for authentication of users and need to understand what are the requirements for RADIUS/GANYMEDE use LDAP.

    What I have to use Cisco ACS or can I use something like Microsoft IAS or free Raduis?

    Any helo will be greatly appreciated.

    Thank you

    Dmitry.

    Yes, you can use either use LDAP, Radius or Ganymede protocols to authenticate users of SSL VPN.

    You can use no matter what authentication server (doesn't have to be Cisco ACS), as long as they have either 3 supports authentication (ldap, radius or Ganymede) protocols.

    Hope that answers your question.

  • Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.

    Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
    A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)

    You type 'Confidence' and nothing happens. the photos on mac app publishes this message.

    This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.

    This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.

  • I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my Yahoo email but can't find the field to change on my devices.  It is simply not there, what is happening?

    I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my password to Yahoo mail but can't find the field to change the password on my devices.  It is simply not there, what is happening?

    For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.

    You can try to delete your account your unit off and add it again.

  • After IOS 10 update all Apps crash after typing a few characters

    After the IOS 10 update my Iphone 5 yesterday, when you type a few characters in applications like Whatsapp, Mail, Notes, etc., all applications hang. I restarted the Iphone already on several occasions. But problem occurring.

    Only when you type very, very slowly (1 character per second or more), it seems that the applications to continue to work and do not hang up.

    Who has any suggestions for this problem?

    Go to settings > general > reset > reset keyboard dictionary and see if that helps.

  • Battery drain after ios 10 updates. Any suggestions?

    Iphone6 battery drain after ios 10 updates. Adjustments or advise please

    Hello, Shabiareekkan!

    Thank you for using communities Support from Apple. I understand from your post that you have concerns over your battery life after updating to iOS 10. I rely on my iPhone for spend me the day and want to ensure that your battery is hard as long as possible! I'm happy to help you.

    My suggestion is to take a look at the following article. It will help you to detect the specific applications or processes may use more energy than others.

    On the use of the battery on your iPhone, iPad and iPod touch

    I encourage you to give special attention to the section 'Adjust settings to improve the battery life', that will connect you to the following site. It contains tips and tricks to help you get the most out of each load.

    Maximize the life of the battery and battery life

    Have a great day!

  • Screenshots does not not on iPhone 5 c since iOS 10 update

    Impossible to take a screenshot on iPhone 5 c since iOS 10 update. Any suggestions?

    Check your technique here:

    How to take a screenshot on your iPhone, iPad and iPod touch - Apple Support

  • status or update of Adobe flash plugin problem

    Plugin check says Adobe Flash PlayerRealNetworks (tm) RealDownloader PepperFlashVideoShim plugin 1.3.0.208 vulnerable but when I click on update, I offer install_flashplayer 17x32_mssa_aaa_aih.exe as an installer. When I run it analyzes security McAfee says that I have already installed the application. Early today ' hui a popup said there was an update for Adobe Flash and I installed it but I don't know the version. Plugin check makes 2 entries for Adobe Flash. The ohher is Adobe Flash PlayerShockwave Flash 17.0 r0 which is updated. I wonder if the update to the first link actually tries to update the sercond (based on the name of the Installer).

    Hi robey, it's just a bug on the plugincheck page which is confusing this realplayer for the flash plugin. Please ignore the advice to update...

  • Firefox 34.0.5 said plugin Adobe Flash is blocked, but the audit reports to update my plugin Flash (version 16.0.0.235) is underway. How to fix?

    About 1 month ago I have updated Flash and Firefox to newer versions. Firefox 34.0.5, running on Windows XP, SP3, displays Adobe Flash plugin in version 16.0.0.235, but it is now blocked again. No other versions of Flash are obvious. When I choose the screen Flash option to check the plugins are updated, Firefox reports the Flash plugin is up to date.
    This program's behavior is wrong and needs to be fixed. Review at Adobe, current Flash is 16.0.0.305.
    Who or what is broken here? Is Firefox broken and not properly related this newest version of the Flash plugin is available?
    I do not seem to previous versions of Flash installed on the system. This combo of the software was working properly for a while and then become broken, without path appropriate to allow users to resolve the issue. If Firefox is set to 'Block' a plugin, then it * MUST * be configured to easily and * CORRECTLY * allow this plugin to update. Using the latest software, my clicking on the function of "Check for updates" is reporting that Adobe Flash is the most recent version. Arrrrgh!
    I am now back to the "diagnose and repair broken Flash + Firefox" exercise that I just went thru.
    Best solution here would be to allow the user to easily override the mechanism of 'blocking' This could help users who use only access Flash video on trusted sites.
    If there is an obvious solution to this 'blocking' current Flash goofery, please inform. Otherwise, when I solve this problem, I'll post an answer to my own question here, stating what I did to solve this problem, because it seems to have an impact on other users Firefox + Flash, without a clear solution being posted.

    OK, fixed. You must manually update for Adobe Flash 16.0.0.305. Do this downloaded by the installation program Adobe Flash, for WIndows with plugin browsers. Closing Firefox, run the Adobe Flash Installer and restart Firefox, you should see the plugin Flash is now 16.0.0.305. I use Windows XP - SP3, on an old HP box. Seems to work ok now (video sites course streams without incurring of autoblocking). Inspection of network traffic shows smoother bandwidth also.

    Steps to follow:

    (1) download the latest version of the Flash plugin installed, for Windows with plugins, if you are using XP - SP3. Try to get the full 18 meg installer of Flash player.
    I followed a number of different links and eventually got to a page
    who has several options for different operating systems and versions
    the browser used. I chose Flash for Windows Setup with
    browsers that use plugins (as opposed to Windows IE/ActiveX).
    I can't find the exact URL that has the 16.0.0.305 plugin. I'll post
    the URL as a post follow-up, once I found where Adobe has it.

    The file you want is:
    'install_flash_player_16_plugin.exe '.

    Note, date 11 February 2015, the version I downloaded
    called 'install_flash_player_16_plugin.exe' is 18,129,584 bytes.

    I ran "md5sum" on it, and got:

    "1bca2e01063de6925c01b21abf9654d8" as the value of control.

    (2) Download this prgm (install_Flash_player_16_plugin.exe), and
    put it anywhere where you put the .exe files downloaded.

    (3) exit Firefox.

    (4) or use the "Run" box, or click a "cmd" to shell
    for a prompt C:\. Find the Setup program, and then run it. Should be
    update the contents of the directory:
    "C:\windows\system32\macromed\flash".

    (5) you can confirm that the content of this directory is updated.
    Check the content of the file "mms.cfg. It has two lines and controls
    If Flash updates will be automatically, or in the background.
    (I'm paranoid, and disable the auto update... Any program of automatic update
    is a perfect vector for insertion of viruses. Use this approach to your own
    risk.)

    (6) restart Firefox and confirm the Flash plugin is now worm 16.0.0.305.

    This should fix the autoblocking of Flash for the 16.0.0.235 plugin.
    -Rus

  • My update to adobe flash player removed flash in mozilla plugin

    I installed the latest update of adobe flash player in mozilla firefox, but the update seems to remove the adobe flash player plugin for firefox. How can I know it? When I go to any Web site that plays videos (Youtube, Blip, Dailymotion) he always tells me to install Adobe flash plugin 11.9. When I check the Macromedia flash software addons tab is missing. All you guys can do will be greatly appreciated.

    Go to message control, install and uninstall programs, uninstall Adobe Flash Player, and then try again to install:

    Then check your plugins:

    then try again to see some videos

  • after update to adobe flash and restart firefox for mac, as requested, cannot restore the previous session

    using macbook pro with os 10.7.5, was recommended to update adobe flash in firefox (22.0). did, which required closing and restarting firefox during the flash update. When you're done, firefox will automatically open to the adobe flash window and restore previous session was grayed out. can not know how to find and restore the tabs that I had used. responses and related issues is not a solution. my settings are all normal and do not seem to report any with the problem. on the contrary, it seems to be the closing and reopening of firefox associated with the flash update that nuked all memory of my last session. is there a solution?

    I found my own solution to my problem! first of all, don't QUIT FIREFOX - to ensure this unwanted session does not become "last session". Instead, open a new window (command-N). in my case, he opened my usual default URL and, while in this window (whether before or after the closing of the first window browser that opened automatically after the update of adobe flash), the option 'restore previous session' in the menu historical reappeared! clicked on it and, therefore, the things everything worked normally.

Maybe you are looking for