Assessment for vSphere exactly how its works

Similar Questions

• Exactly how memory works in Labview Fpga

  I use a PXI 7853 and me for the last few days I've been playing with the help of blocks of memory in the FPGA.

  Now, I'm relatively new to Labview FPGA programming and this is why I would be grateful if someone could provide me with some clarification on the following points:

  (a) given that I work on the development host computer when I initialize memory with the ability to use a memory initialization VI then how does exactly in the backend. What I want to ask is, when I change the values of the memory in the computer development and then compile the FPGA VI in the Board of Directors, what is data memory are brought in the FPGA. If this is the case then in what form are the details initially registered in the development computer.

  (b) is it possible for me to use the initialization method VI to change memory n valuesi while the FPGA VI is running. If this isn't the case, then it would make a difference if I stop the VI and then change the values using the Initialize method. Who would actually reflect on the FPGA or should I have to re compile the FPGA VI whenever I change memory values in the development machine, using the "VI initialization method (which is available as an option for us do a right-click on the block of memory in the Project Explorer window).

  I tried test with simulation of FPGA VI and found that when I try to change the values of memory by running VI initialization. a pop up that says that it is not possible that the FPGA VI is still in service is delivered.

  Any light on this or advice with links would be much appreciated

  See you soon

  sbkr

  sbkr wrote:

  (a) given that I work on the development host computer when I initialize memory with the ability to use a memory initialization VI then how does exactly in the backend. What I want to ask is, when I change the values of the memory in the computer development and then compile the FPGA VI in the Board of Directors, what is data memory are brought in the FPGA. If this is the case then in what form are the details initially registered in the development computer.

  When you compile the FPGA VI, he will understand the values used to initialize the memory.

  Are asking you what happens if you run the VI FPGA on your development computer, and your FPGA VI, written in the memory block, the new values are included when you compile the FPGA VI? No, these values will be lost. The values contained in the bitfile are the values you used to initialize the block of memory, as defined in the memory properties dialog box. The initial values are saved in the LabVIEW project file and the definition of memory block.

  sbkr wrote:

  (b) is it possible for me to use the initialization method VI to change memory n valuesi while the FPGA VI is running. If this isn't the case, then it would make a difference if I stop the VI and then change the values using the Initialize method. Who would actually reflect on the FPGA or should I have to re compile the FPGA VI whenever I change memory values in the development machine, using the "VI initialization method (which is available as an option for us do a right-click on the block of memory in the Project Explorer window).

  You will have to recompile the FPGA in order to use the new initialization values, because these values are part of the bitfile FPGA.

• ST2420 exactly how to work the color controls?

  Try to adjust the brightness and to get rid of a yellow cast

  User Guide should tell you how to run the color controls:
  FTP://FTP.Dell.com/manuals/all-products/esuprt_electronics/esuprt_Display/Dell-st2420l_User%27s%20Guide_en-us.PDF

• Please explain how its work?

  Select distinct sal emp where 3 > = (select count (distinct sal) of emp b where a.sal > = b.sal);

  The first point is like a cross join. The salary of a table is compared to each row in table B. It displays the result of all the lines whose salary is lower than the wage of the B table.

  for example: 800 is less than or equal to all other treatments. It therefore appears 14 times. The number of records in the table is 14 years. 800 is therefore less than all salaries in table B.

  Similarly, the 5000 salary is less than or equal to 5000 only as a record is displayed. Here it is the number of records for each resulting salary.

  800	14
  950	13
  1100	12
  1250	22
  1300	9
  1500	8
  1600	7
  2450	6
  2850	5
  2975	4
  3000	6
  5000	1

  In the second stage when we make a separate, the salary will be shown as a separate value in ascending order.

  Run the sub queries and understand the result. you will get a better understanding on step 1.

  Select b.sal sal b emp emp where a.sal > = b.sal

  Select count (*) number_of_times, sal from (select b.sal sal b emp emp where a.sal > = b.sal)

  Sal group

• Can someone explain how Vmotion works with the new Distributed vNetwork switches?

  So my days of ESX 3.5 I create a separate vswitch for my virtual switch Production and another for Vmotion and then connect the physical NIC I had planned on using for the production and VMotion switch.  Then I would make sure that these cards were physically connected to the trunk on the physical switch based on the vlan that I planned to use for each switch.

  So how has all this change vNetwork switches Distributed? I know that the vNetwork Distributed switch is created at the data center level, but I'm a little confused on exactly how it works. I have watched white papers, but hoped that someone could explain it in terms laymans for me...

  Also refer to this discussion:

  http://communities.VMware.com/thread/223379

  I think that the last post I did on this discussion help answer some of the specifics of your question about the connection of VMotion vs other connections.

• How can you change a password on Vista for a group of net work at home

  How can you access the area to change the password for a group of net work at home? I'm unable to find had worked well but formatted Vista computer to make it faster. Now unable to find the box to change the password. Another computer on a network running 7.

  Hello

  What password are you talking?

  If it's regarding network sharing again the sharing.

  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• How it works for objectChoice group "FOCUS_CHANGED".

  Hi all

  can someone tell me how FOCUS_CHANGED works for the group object of choice when we change our focus in the drop-down window?

  actully I use:

  {public focusChanged Sub (field field, int eventType)

  If (eventType == FOCUS_CHANGED) {}
  System.out.println ("FOCUS_CHANGED");
  } else if(eventType == FOCUS_GAINED) {}
  System.out.println ("FOCUS_GAINED");
  } else if(eventType == FOCUS_LOST) {}
  System.out.println ("FOCUS_LOST");
  }

  }

  It nevers print "FOCUS_CHANGED", but it works for the FOCUS_GAINED and the FOCUS_LOST.

  Please help me.

  Its urgency.

  Thank you

  Ashutosh

  Well you're right, it doesn't have the fire for me either. You can use "FieldChangeListener" it will be server your purpose.

• I bought a windows 7 lp CAREB a year it worked fine some how its windows to say now not authentic

  I bought a windows 7 lp CAREB a year it worked very well some how its windows to say now not authentic please help

  [Moved from comments]

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Yes. Time Capsule uses the Time Machine on your Mac software. Here is information on both and the restoration:

  http://www.Apple.com/airport-time-capsule/

  Use Time Machine to back up or restore your Mac - Apple Support

• My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  This could be an overheating problem.  If your CPU overheats, then the power will suddenly cut to your computer.  Boot safe mode starts with less processeses and running tasks and so your computer can run more fees.  Since you get 20 to 30 minutes, the way to check this is to download and run freeware 'CoreTemp '.

  <>http://www.alcpu.com/CoreTemp/ >

  It displays the temperature of your CPU and show you if it is not too hot before you stop.

  The two main causes of overheating are fans of CPU does not and a build-up of dust in your computer that acts as a blanket and causes overheating.   If overheating is your problem, open the case, check the appropriate fan and buy a can of compressed air to blow the dust bunnies.

  Another possible cause is bad RAM (memory) memory modules.  Try to remove and re - insert your RAM modules.  There are also tests of RAM, you can run - although they tend to be CPU, so you won't know if you have a RAM problem or a problem of temperature.

  HTH,

  JW

• spell check does not work for dreamweaver Uppercases how can I get it back?

  spell check does not work for dreamweaver Uppercases how can I get it back?

  Hello

  Dreamweaver is an Adobe product. I suggest you to contact Adobe support for assistance. Please post your query in the Adobe forums.
  Dreamweaver

  http://forums.Adobe.com/community/Dreamweaver

• When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

  When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

  Original title: the process host

  How to perform a clean boot in Windows:
  (solve a problem by performing a clean boot in Windows Vista, Windows 7 or 8)
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the offending software application that causes the message "host process for windows services has stopped working" is displayed...

  J W Stuart: http://www.pagestart.com

• CISCO 881 identify exactly how IOS for installation.

  Dear all.

  Please clerify for me:

  1.I have a CISCO881-SEC-K9 cisco router.

  ROM: System Bootstrap, Version 12.4 (22r) YB5, RELEASE SOFTWARE (fc1)

  If I understand it - 12.4 (22r) YB5 - is my latest version of IOS.

  2.i would like to update my IOS and save all the licenses that have already installed.

  Issues related to the:

  1. how exactly how to identify IOS for installation, which release?

  2. how to perform the installation and save installed licenses.
  examples?

  The ServiceGrid community is specifically designed for active software services, and unfortunately we can not answer this question.

  However, you can increase your question in the lan and community Routing switches:

  https://supportforums.Cisco.com/community/6016/LAN-switching-and-routing

  I hope that helps

  Best regards

  Patrick

• I just installed acrobat adobe 7.0 standard and everything seems to go well except it doesn't have the option of the typewriter in the section tool like my previous installation. This is a very important feature for me how this works?

  I just installed acrobat adobe 7.0 standard and everything seems to go well except it doesn't have the option of the typewriter in the section tool like my previous installation. This is a very important feature for me how this works?

  Hi timr22708473,

  Acrobat 7 is really an old version of acrobat & might not be compatible with your system configuration to features may or may not work.

  This is the reason why Adobe recommends always using the application in a consistent environment.

  Kind regards

  Nicos

• I have, just, paid, for, one, monthly, how, long ago, in fact, she, for take, LR and PS, to, work?

  I have, just, paid, for, one, monthly, how, long ago, in fact, she, for take, LR and PS, to, work?

  I have a receipt from paypal for payment, do you want the order of point number?