Assessment method regarddu or ByValue

In the Stimulus Profile Editor (VS2011), parameters can be either selected with the method of assessment being 'simple' or 'byValue. What does it mean and where is there any documentation to this?

L.

I'm looking into the side of the documentation of your question, but for now, I can talk about what these terms mean.

If a parameter is selected byValue evaluation method, then when the sequence of the sequence is called as a sous-suite, he will get a copy of the value of the variable mapped to this setting. This means that if the call sequence is updating the value of the variable mapped when the subsequence is running (from another task in a multitasking structure), the value of the parameter in the subsequence won't suffer, because it's just a copy of the value of the original variable. Similarly, if the subsequence changes the value of the parameter during execution of the subsequence, this does not affect the value of the variable mapped in the calling sequence.

If a parameter has selected the simple evaluation method, then it will work directly on the value of the mapped variable which is passed from the calling sequence. So if the subsequence updates the value of the parameter, the variable mapped in the call sequence is also updated. Conversely if the call sequence will update the value of the variable mapped when the subsequence has been running for another task, the value of the parameter in the subsequence will change too.

For this reason, if you have a parameter that you want to map to a string of system definition, it probably always simple. This means that as the definition of system change string value, changes in the value parameter as well, and when the sequence updates the setting, the system definition string is updated also. For example, the sequence of the ramp and the sequence of SineWave specify that the RampOut and SineWaveOut parameters are regarddu, so that the sequence runs and reads back the data on these variables, any channel mapped to these variables is also updated.

In general, you can probably almost always simply leave a setting as simple and not to think about. Most of the time that naturally fits with what you would expect would happen. The only drawback with simple settings is that, in order to map a variable to the calling sequence, the variable in the calling sequence must be the same exact data type as a parameter. So you can't map a variable of I32 in a sequence to a double simple parameter in a called sous-suite. You can do this with a parameter byValue. Because the subsequence in this case is just a copy of the value anyway, it is normal to compel this copy for the data type of the setting.

We can take a look at a simple example. Imagine that you have a Foo sequence that has a setting double x. Foo all does is increment x 10 times.

  • Foo

    • Setup

    • Main

      • I'm in [(0, 10)]

        • x = x + 1

    • Cleaning

Imagine that you have a sequence bar calling with a local variable z that calls Foo.

  • Bar

    • Setup

      • z = 0

    • Main

      • Foo (z)

    • Cleaning

If the parameter x in Foo is simple, then after calling Foo, the value of z in bar is 10, because Foo worked directly on the value of z. However, if the parameter x in Foo was byValue, then the z value after calling Foo is always 0, because Foo was just increment a copy of the value of z, not z himself.

Tags: NI Products

Similar Questions

  • Output of the assessment

    -I watched some of the other messages in this forum and I don't see anything that really answers my questions I would say. A more experienced user can provide all the help is appreciated. Alternatively, this post is in another section of the forum? Thank you! --

    I just recorded a CBT in demonstration, training and assessment methods. The three files play fine. My hope is to create an index where the user would watch the demo, then the training and finally, to take the assessment. My first problem is with the part of the assessment. I set quiz preferences in place to email the results of the evaluation to me after completion. The user must select the correct links and enter the correct data in some fields to pass this course. The problem is that at the end of the assessment, nothing happens. No email, nothing. When I created traditional games in Captivate (T/F, multiple choice, etc.) this feature works very well. Any ideas?

    My second question concerns menu builder. What is the best way to create the index? I don't see tutorials on the menu builder, and while I can guess how to use it, I'd rather have something more Visual to look before using it. Any thoughts?

    Thank you! : confused;

    An email is sent only if the user clicks the "Send E-mail" button in the summary of Quiz page (or whatever you changed this button to read). Just Quiz settings make this button appears on the summary slide.

    Regarding the Menu Builder, is not well documented, or not at all. I've never used but I heard it's a pain, because you cannot insert elements... to add an item, you should remove everything after that point and add them all back in order "again.

    You may find that it is easier to create a project 1-slide with buttons or click on the boxes related to each of your projects. This way, you have full control over the appearance of your menu.

    Another alternative is Captivate Player of Jesse Warden, who is a shell-driven menus for Captivate projects. It can be downloaded here:

    http://code.Google.com/p/captivateplayer/

  • problem with the playback of the record to Captivate (sensitive design mode) 8 screen

    I use 8 Captivate sensitive design.  I did some screen recordings (in demonstration, training and assessment methods) and that whenever there is a short video clip (for example by dragging a bar window or a cursor on the screen), it plays fine in design mode, but then when I publish the entire project for the preview, the clips are suppressed.  It seems that these clips are integrated into my slides Fund and are in SWF format.

    I wonder if they do not play properly is because I publish to HTML5.  If so, how can I convert these small clips SWF to something else?  And if not, what else could be wrong?

    My solution is to replace these slides FMR (having a camera on the film) which sometimes cause issues when publishing to HTML5, cpvc slides, if I can't avoid them. Very often, you can avoid dragging the mouse: example is to click on the scroll somewhere bar instead of drag in the scroll bar, to use the hotkeys etc. When you can't escape a "video shift' stop recording, use the big slides, video demonstration or Insertion button, slide CPVC and you will get video demo mode, where you can record video (its editor-in-Chief is much more powerful than the limited functionality of FMR-edition). When you are finished with the cpvc-slide, you can continue capturing software with slides, software simulation (he is lacking in the Insert menu for some unknown reason). It's more work, I know, but will play in HTML5 (these slides are converted to MP4), its quality is much better than FMR and you have video editor if necessary.

  • 11g http2-port http2-Protocol xdbconfig.xml

    Hello
    I use 11g, I tried to configure HTTPS for my xdb.
    I followed the "Guide of Oracle® XML DB Developer"-> "28 Using protocols to access the repository.
    to configure the "http2-port" and "http2 Protocol" settings, but it did not work.

    Here's what I did:
    SQL > DECLARE
    * 2 v_cfg XMLType; *
    * BÉGIN 3 *.
    * UpdateXML (DBMS_XDB.cfg_get (SELECT) 4, *)
    * 5 ' / xdbconfig/sysconfig/protocolconfig/httpconfig/http2-port / text () ', *.
    * 6 '433', *.
    * 7 ' / xdbconfig/sysconfig/protocolconfig/httpconfig/http2-protocol / text () ', *.
    (* 8 "TCPS") *.
    * 9 v_cfg *.
    * 10 FROM DUAL; *
    * 11 DBMS_XDB.cfg_update (v_cfg); *
    * VALIDATION 12; *
    * 13 exception *.
    * 14 so that others then *.
    * 15 dbms_output.put_line (sqlerrm); *
    * 16 END; *
    * 17 *.

    PL/SQL procedure successfully completed.

    SQL > SELECT DBMS_XDB.cfg_get () FROM DUAL;
    DBMS_XDB. CFG_GET()
    --------------------------------------------------------------------------------
    * < xdbconfig xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://xmlns.oracle.com/xdb/xdbconfig.xsd http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < sysconfig > *.
    * < acl-max-age > 15 < / acl-max-age > *.
    * < acl-cache-size > 32 < / size of the acl cache-> *.
    * < invalid-pathname-tanks / > *.
    * < break > true < / case sensitive > *.
    * < call-timeout > 6000 < / timeout call > *.
    * < max-link-tail > 65536 < / max-link-tail > *.
    * < max-session-use > 100 < / max-session-use > *.
    * < fake sessions - permanent > < / permanent sessions > *.
    * < by default-lock-timeout > 3600 < / by default-lock-timeout > *.
    * < xdbcore-logfile-path > /sys/log/xdblog.xml < / path-logfile-xdbcore > *.
    * < xdbcore-journal-level > 0 < / level-journal-xdbcore > *.
    * < cache > 1048576 resource-display-size < / view-resources-cache size > *.
    * < protocolconfig > *.
    * < shared > *.
    * < - extension mappings > *.
    * < maps mime - > *.
    * < mapping mime - > *.
    * < to the extension > < / extension > *.
    * < mime type > audio/basic < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < avi extension > < / extension > *.
    * < mime type video/x-msvideo > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < bin extension > < / extension > *.
    * application/octet-stream mime-type <>< / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < bmp extension > < / extension > *.
    * < mime type > image/bmp < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < css extension > < / extension > *.
    * < mime type > text/css < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < doc extension > < / extension > *.
    * <>mime-type application/msword < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < eml extension > < / extension > *.
    * < mime type > message/rfc822 < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < gif extension > < / extension > *.
    * < mime type > image/gif < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < htm extension > < / extension > *.
    * <>mime-type text/html < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > html < / extension > *.
    * <>mime-type text/html < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < jpe extension > < / extension > *.
    * < mime type > image/jpeg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < jpeg extension > < / extension > *.
    * < mime type > image/jpeg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < jpg extension > < / extension > *.
    * < mime type > image/jpeg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < js extension > < / extension > *.
    * <>mime-type application/x-javascript < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > jsp < / extension > *.
    * <>mime-type text/html < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > medium < / extension > *.
    * < audio > type mime/mid < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < mov extension > < / extension > *.
    * < mime type > video/quicktime < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < film extension > < / extension > *.
    * < mime type > video/x-sgi-movie < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < mp3 extension > < / extension > *.
    * < mime type > audio/mpeg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > mpe < / extension > *.
    * < mime type > video/mpg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > mpeg < / extension > *.
    * < mime type > video/mpg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < mpg extension > < / extension > *.
    * < mime type > video/mpg < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < msa extension > < / extension > *.
    * <>mime-type application/x-msaccess < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < msw extension > < / extension > *.
    * <>mime-type application/x-msworks-wp < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > pcx < / extension > *.
    * <>mime-type application/x-pc-brush < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < pdf extension > < / extension > *.
    * mime-type application/pdf <>< / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < png extension > < / extension > *.
    * < mime type > image/png < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < ppt extension > < / extension > *.
    * < application / vnd.ms - powerpoint mime-type > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < ps extension > < / extension > *.
    * <>mime-type application/postscript < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < qt extension > < / extension > *.
    * < mime type > video/quicktime < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < ra extension > < / extension > *.
    * < mime type audio/x-realaudio > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < ram extension > < / extension > *.
    * < mime type audio/x-realaudio > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < rm extension > < / extension > *.
    * < mime type audio/x-realaudio > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < rtf extension > < / extension > *.
    * <>mime-type application/rtf < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > rv < / extension > *.
    * < mime type video/x-realvideo > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > sgml < / extension > *.
    * < mime type > text/sgml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < svg extension > < / extension > *.
    * < mime type > image/svg + xml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < tif extension > < / extension > *.
    * < mime type > image/tiff < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < tiff extension > < / extension > *.
    * < mime type > image/tiff < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < txt extension > < / extension > *.
    * <>mime-type text/plain < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < url extension > < / extension > *.
    * <>mime-type text/plain < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > vrml < / extension > *.
    * < mime type > x-world/x-vrml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < wav extension > < / extension > *.
    * < mime type > audio/wav < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < wpd extension > < / extension > *.
    * <>mime-type application/wordperfect5.1 < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > xls < / extension > *.
    * < application / vnd.ms - excel mime-type > < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > xml < / extension > *.
    * < mime type > text/xml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > xsd < / extension > *.
    * < mime type > text/xml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < extension > xsl < / extension > *.
    * < mime type > text/xml < / mime-type > *.
    * < / mime map > *.
    * < mapping mime - > *.
    * < zip extension > < / extension > *.
    * <>mime-type application/x-zip-compressed < / mime-type > *.
    * < / mime map > *.
    * < mime-mapping xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < htc extension > < / extension > *.
    * < mime type > text/x-component < / mime-type > *.
    * < / mime map > *.
    * < mime-mapping xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < xbl extension > < / extension > *.
    * < mime type > text/xml < / mime-type > *.
    * < / mime map > *.
    * < / mime mappings > *.
    * < lang-mappings > *.
    * < lang-mapping > *.
    * < en extension > < / extension > *.
    * < lang > English < / lang > *.
    * < / lang-mapping > *.
    * < / lang-mappings > *.
    * < charset mappings / > *.
    * < encoding-mappings > *.
    * < encoding-mapping > *.
    * < gzip extension > < / extension > *.
    * < zip encoding > < / encoding > *.
    * < / encoding mapping > *.
    * < encoding-mapping > *.
    * < tar extension > < / extension > *.
    * < tar encoding file > < / encoding > *.
    * < / encoding mapping > *.
    * < / encoding-mappings > *.
    * < / extension mappings > *.
    * < session-pool-size > 50 < / session-pool-size > *.
    * < session-timeout > 6000 < / session-timeout > *.
    * < / common > *.
    * < ftpconfig > *.
    * < ftp-port > 0 < / ftp-port > *.
    * < ftp-listener > local_listener < / ftp-listener > *.
    * <-> tcp ftp protocol < / ftp protocol > *.
    * < logfile-path > /sys/log/ftplog.xml < / logfile-path > *.
    * <>newspapers-level 0 < / the log level > *.
    * < session-timeout > 6000 < / session-timeout > *.
    * <>size of 8192 buffer < / buffer size > *.
    * < / ftpconfig > *.
    * < httpconfig > *.
    * < > 80 http-port < / http-port > *.
    * <-> local_listener http listener < / http listener > *.
    * <>tcp http-protocol < / http-protocol > *.
    * < max-http-headers > 64 < / max-http-headers > *.
    * < max-in-head-size > 16384 < / max-in-head-size > *.
    * < max-request-body > 2000000000 < / max-request-body > *.
    * < session-timeout > 6000 < / session-timeout > *.
    * < HTTP XDB servername server > < / server name > *.
    * < logfile-path > /sys/log/httplog.xml < / logfile-path > *.
    * <>newspapers-level 0 < / the log level > *.
    * < servlet-Kingdom > base = & quot; XDB & quot; < / servlet-Kingdom > *.
    * < webappconfig > *.
    * < Welcome-file-list > *.
    * < Welcome file > index.html < / welcome-file > *.
    * <>Welcome-file index.htm < / welcome-file > *.
    * < / Welcome-file-list > *.
    * <-error pages / > *.
    * < servletconfig > *.
    * < servlet-mappings > *.
    * < servlet-mapping > *.
    * < servlet-model > / Test < / servlet-model > *.
    * < servlet-name > TestServlet < / servlet-name > *.
    * < / servlet-mapping > *.
    * < servlet-mapping > *.
    * < servlet-pattern > /oradb / * < / servlet-model > *.
    * < servlet-name > DBURIServlet < / servlet-name > *.
    * < / servlet-mapping > *.
    * < servlet-mapping > *.
    * < servlet-pattern > /orarep / * < / servlet-model > *.
    * < servlet-name > ReportFmwkServlet < / servlet-name > *.
    * < / servlet-mapping > *.
    * < servlet-mapping xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < servlet-pattern > /i / * < / servlet-model > *.
    * < servlet-name > PublishedContentServlet < / servlet-name > *.
    * < / servlet-mapping > *.
    * < servlet-mapping xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < servlet-model > / * < / servlet-model > *.
    * < APEX name servlet - > < / servlet-name > *.
    * < / servlet-mapping > *.
    * < servlet-mapping xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < servlet-pattern > /apex / * < / servlet-model > *.
    * < APEX name servlet - > < / servlet-name > *.
    * < / servlet-mapping > *.
    * < / servlet-mappings > *.
    * <>list of servlet *.
    * < servlet > *.
    * < servlet-name > TestServlet < / servlet-name > *.
    * < Java servlet language > < / servlet language > *.
    * < display name > XDB Test Servlet < / name >. *
    * < description > a servlet to test the operation internal to the API Servlet XDB < / description >. *
    * the xdbtserv servlet class <>< / class of the servlet > *.
    * < servlet-pattern xdb > < / servlet-schema > *.
    * < / servlet > *.
    * < servlet > *.
    * < servlet-name > DBURIServlet < / servlet-name > *.
    * < C servlet language > < / servlet language > *.
    * < display name > DBURI < / name >. *
    * < Servlet to access DBURIs description > < / description >. *
    * < security-role-ref > *.
    * < authenticatedUser role name > < / role name > *.
    * < authenticatedUser role link > < / role link > *.
    * < / security-role-ref > *.
    * < / servlet > *.
    * < servlet > *.
    * < servlet-name > ReportFmwkServlet < / servlet-name > *.
    * < C servlet language > < / servlet language > *.
    * < display name > REPT < / name >. *
    * < description > Servlet to access reports < / description >. *
    * < security-role-ref > *.
    * < authenticatedUser role name > < / role name > *.
    * < authenticatedUser role link > < / role link > *.
    * < / security-role-ref > *.
    * < / servlet > *.
    * < servlet xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < servlet-name > PublishedContentServlet < / servlet-name > *.
    * < C servlet language > < / servlet language > *.
    * < display name > unauthenticated access Servlet file < / name >. *
    * < description > Servlet for files for unauthenticated users < / description >. *
    * < init-param > *.
    * < RootFolder param-name > < / param-name > *.
    * < param-value > / images < / param-value > *.
    * < description > RootFolder < / description >. *
    * < / init-param > *.
    * < security-role-ref > *.
    * < role name > anonymousServletRole < / role name > *.
    * < role-link > anonymousServletRole < / role link > *.
    * < / security-role-ref > *.
    * < / servlet > *.
    * < servlet xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < APEX name servlet - > < / servlet-name > *.
    * < PL/SQL servlet-language > < / servlet language > *.
    * < APEX display name > < / name >. *
    * < plsql xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < username database xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > ANONYMOUS < / database-username > *.
    * < pages by default xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > apex < / default pages > *.
    * < name-table-document xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > wwv_flow_file_objects$ < / document-table-name > *.
    * <-path xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > docs < / path > *.
    * < document-procedure xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > wwv_flow_file_mgr.process_download < / procedure document > *.
    * < nls language xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > american_america.al32utf8 < / nls language > *.
    * < application-validation-function xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > wwv_flow_epg_include_modules.authorize < / application-validation-service > *.
    * < / plsql > *.
    * < security-role-ref xmlns = "http://xmlns.oracle.com/xdb/xdbconfig.xsd" > *.
    * < role name > anonymousServletRole < / role name > *.
    * < role-link > anonymousServletRole < / role link > *.
    * < / security-role-ref > *.
    * < / servlet > *.
    * < / servlet-list > *.
    * < / servletconfig > *.
    * < / webappconfig > *.
    * < authentication > *.
    * < basic mechanism allow > < / allow mechanism > *.
    * < digest-auth > *.
    * < > 300 Nuncio-timeout < / nonce-timeout > *.
    * < / digest-auth > *.
    * < / sign > *.
    * < / httpconfig > *.
    * < / protocolconfig > *.
    * < xdbcore-xobmem-bound > 1024 < / xdbcore-xobmem-bound > *.
    * < xdbcore-loadableunit-size > 16 < / xdbcore-loadableunit-size > *.
    * < acl assessment method > ace-order < / acl-evaluation-method > *.
    * < / sysconfig > *.
    * < / xdbconfig > *.



    You can see that there is no "http2-port" or "http2 Protocol" in xdbconfig.xml.

    Then, I tried this:
    SQL > DECLARE
    * 2 v_cfg XMLType; *
    * BÉGIN 3 *.
    * InsertXMLbefore (DBMS_XDB.cfg_get (SELECT) 4, *)
    * 5 "/ xdbconfig/sysconfig/protocolconfig/httpconfig/authentication" *
    (* 6 XMLType ("< http2-port > 433 < / http2-port > '")) *.
    * 7 v_cfg INTO *.
    * 8 FROM DUAL; *
    * 9 DBMS_XDB.cfg_update (v_cfg); *
    * 10 VALIDATION; *
    * exception 11 *.
    * 12 so that others then *.
    * 13 dbms_output.put_line (sqlerrm); *
    * 14 END; *
    * 15 *.
    ORA-30937: no schema definition for "http2-port" ("##local" namespace) in parent ' / xdbconfig/sysconfig/protocolconfig/httpconfig.


    It seems that I can not insert "http2-port" in xdbconfig.xml either.

    I don't know why...

    Please help, thanks in advance!

    Namespaces :)

    SQL>   SELECT insertXMLBefore
  2           (
  3             DBMS_XDB.cfg_get(),
  4             '/xdbconfig/sysconfig/protocolconfig/httpconfig/authentication',
  5             XMLType('433'),
  6             'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd'
  7           )
  8    from dual;

  
    15
    32
    
    true
    6000
    65536
    100
    false
    3600
    /sys/log/xdblog.xml
    0
    1048576
    
      
        
          
....
          
          
            
              en
              english
            
          
          
          
            
              gzip
              zip file
            
            
              tar
              tar file
            
          
        
        50
        6000
      
      
        21
        local_listener
        tcp
        /sys/log/ftplog.xml
        0
        6000
        8192
      
      
        80
        local_listener
        tcp
        64
        16384
        2000000000
        6000
        XDB HTTP Server
        /sys/log/httplog.xml
        0
        Basic realm="XDB"
        
....
        
        true
        433
        
          basic
          
            300
          
        
      
    
    
      

        http://earth.google.com/kml/2.1
        kml
        http://code.google.com/apis/kml/schema/kml21.xsd
      
      

        http://earth.google.com/kml/2.2
        kml
        http://code.google.com/apis/kml/schema/kml21.xsd
      
    
    1024
    16
    ace-order
  


Elapsed: 00:00:01.03
SQL>

  • assessment polynomial vi giving inconsistent results

    I'm looking at an easier method to evaluate polynomial, rather than using formulas nodes that I currently use.  I found the "polynomial evaluation vi' who would think based on aid would be able to calculate the result of a polynomial Exhibitor multi.

    Currently, I would do something like the following in a node of the formula:

    float64 D1 = 0.387481063640E - 01;
    float64 D2 = 0.332922278800E - 04;
    float64 D3 = 0.206182434040E - 06;
    float64 D4 = - 0.218822568460E - 08.
    float64 D5 = 0.109968809280E - 10;
    float64 D6 = - 0.308157587720E - 13;
    float64 D7 = 0.454791352900E - 16;
    float64 D8 = - 0.275129016730E - 19;

    DC = (V * D1) +(D2*V**2) +(D3*V**3) +(D4*V**4) +(D5*V**5) +(D6*V**6) +(D7*V**7) +(D8*V**8).

    I tried the same calculation by writing a little VI which used the polymomial assessment vi and get seriously incorrect results.  (my vi attached).

    Research in the evaluation of the polynomial vi, honestly, I don't know how it is supposed to work, unless he's trying to do something completely different that I do.   (With the help of labview 2015)

    I'm open to suggestions here.  Thank you!  Mitch

    The first table is the constant term (V ^ 0 = 1), if you need to add an element that is equal to zero in the table of coefficients.

    The polynomial is defined as:

    DC = D0 + (V * D1) +(D2*V**2) +(D3*V**3) +(D4*V**4) +(D5*V**5) +(D6*V**6) +(D7*V**7) +(D8*V**8)

    In your case, D0 = 0, but there still need to be there.

    ... and are not the constant diagram EXT. As you can see about to constraint, it will be converted in any case to DBL.

  • Assessment of TestStand and have trouble...

    Hello

    I created a step that calls a module (.dll). This step creates an object and stores its reference in a local variable called "ObjectRef.

    Here's what I did:

    1 insert-> action step: 'Action '.

    2 specify the module

    3. fill the Assembly text box

    4 pick the right class

    5. fill the text .NET call box

    6. specified in the value text box: "Locals.ObjectRef."

    Then I created another step in order to call the method "getValue" of the object created previously

    Here's what I did:

    1 insert-> action step: "Action2".

    2 specify the module

    3. fill the Assembly text box

    4 pick the right class

    5 filled "use object (ClassLibrary.cls604242_00) .getValue (existing)" of the .NET call text box

    6. specified in the value text box: "Locals.returnValue."

    At runtime, I expect to see the 'returnValue' value in the variable Panel but I do not have. Also, I get a runtime error message.

    Could someone tell me what I'm doing wrong?

    As I mentioned in the topic, I conducts an assessment of this product for my business.

    Thank you

    Mathieu BAzinet


  • Cannot complete assessment

    hoping you can consult my

    1302296 (2988) - winsat\logging.cpp:0815:-BEGINNING 2011\7\8 19:23:17 -
    1302296 (2988) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 4c20263a-656c-45de-8bb9-56f5900c1ff7
    1302296 (2988) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
    1302514 (2988) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
    1302545 (2988) - 4585: Watch dog system active
    1302545 (2988) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
    1302545 (2988) - winsat\main.cpp:3115: an error occurred trying to read partial assessments from the data store.  Comprehensive assessment running
    1302577 (2988) - winsat\main.cpp:2505: > DWM doesn't work do not.
    1302577 (2988) - 2470: > EMD service will be restored to the exit.
    1303216 (2988) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
    1303232 (2988) - 2793: > power policy saved.
    1303497 (2988) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
    1303497 (2988) - winsat\main.cpp:2814: > policy set to maximum power.
    1304339 (2988) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
    1304339 (2988) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
    1304339 (2988) - winsat\main.cpp:1775: > Run Assessment features
    1304589 (2988) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
    1320064 (2988) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1791890
    1320064 (2988) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
    1320064 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
    1327459 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
    1334619 (2988) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
    1343901 (2988) - d3d\dx9misc.cpp:1030: the D3D assessment was stopped by the user.
    1344572 (2988) - winsat\main.cpp:1948: > Cancel received, waiting for d3d 10000ms cancel
    1344572 (2988) - winsat\main.cpp:1958: > d3d assessment properly cancelled.
    1344603 (2988) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1791890
    1344603 (2988) - winsat\processresults.cpp:1241: jumping graphic reading video time check.
    1344603 (2988) - winsat\processresults.cpp:1253: check limited to jump StdDefPlayback.
    1344603 (2988) - winsat\processresults.cpp:1265: check limited to jump StdDefPlayback.
    1344603 (2988) - winsat\processresults.cpp:1480: > partition disk writes in register 0
    1344681 (2988) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
    1344681 (2988) - winsat\main.cpp:2855: > state restored power.
    1344681 (2988) - winsat\main.cpp:2870: > Successfully reenabled EMD.
    1344884 (2988) - winsat\main.cpp:2896: > SystemRoot Composition
    1344900 (2988) - winsat\watchdog.cpp:0311: Watch dog system shutdown
    1344900 (2988) - 4909: > exit value = 3.

    358474 (1764) - winsat\logging.cpp:0815:-BEGINNING 2011\7\8 20:20:45 -
    358521 (1764) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 54637c2b-6b4d-4563-a9e6-568c1ab9b496
    358521 (1764) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
    359972 (1764) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
    360003 (1764) - 4585: Watch dog system active
    360003 (1764) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand


    360003 (1764) - winsat\main.cpp:3115: an error occurred trying to read partial assessments from the data store.  Comprehensive assessment running
    360019 (1764) - winsat\main.cpp:2505: > DWM doesn't work do not.
    360019 (1764) - 2470: > EMD service will be restored to the exit.
    360221 (1764) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
    360221 (1764) - 2793: > power policy saved.
    360549 (1764) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
    360549 (1764) - winsat\main.cpp:2814: > policy set to maximum power.
    361563 (1764) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
    361563 (1764) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
    361563 (1764) - winsat\main.cpp:1775: > Run Assessment features
    362062 (1764) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
    378193 (1764) - winsat\processresults.cpp:4018: > wrote bandwidth video memory in the registry 1831620
    378193 (1764) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS

    Hello

    ·         You get the error message?

    I suggest you follow the steps below:

    Method 1:

    Follow method 4 in the article below and check if the problem persists:

    http://support.Microsoft.com/kb/933478

    Method 2:

    Run the tool File Checker system to troubleshoot missing or corrupted system files follow the steps in the following article below to run the System File Checker:

    http://support.Microsoft.com/kb/929833

  • call method before managed Bean support page

    Hi guys,.

    My Version of Jdev is 12 c. I want to call a method of bean managed before my Page load. I did an EnableDisableMethod() method in my managed Bean that is my default activity in my taskflow. This method is only how to turn off to some of my Page buttons. I use * in my control flow so that my page will be called each time after the execution of my method by default. But what my result will be fixed for my activity method. Also what is the use of the result sets.

    <-l' id = 'enableDisable' method call >

    < method > #{pageFlowScope.bgBean.enableDisable} < / method >

    < result >

    < / results >

    < / method >

    Also when I run that application.page is empty but in newspaper that comes

    < 23 June 2014 12:41:30 IST > < WARNING > < oracle.adfinternal.controller.metadata.model.xml.PageFlowXmlImpl > < BEA-000000 > < ADFc: /WEB-INF/bGMstTF.xml #bGMstTF: >

    < 23 June 2014 12:41:30 IST > < WARNING > < oracle.adfinternal.controller.metadata.model.xml.PageFlowXmlImpl > < ADFC-52024 > < ADFc: duplicate managed definition of bean to "bgBean" detected. >

    < 23 June 2014 12:41:30 IST > < WARNING > < oracle.adfinternal.controller.activity.MethodCallActivityLogic > < ADFC-56013 > < ADFc: Exception when the assessment call to method activity expression EL "#{pageFlowScope.bgBean.enableDisable}". >

    When I'm debugging its my default front method call load.but page does not redirect to my page. I think that the problem with my key component.before page load it does not know my button

    mainBtnAdd.setDisabled (true);  It is here, I think what he does ' t know button until pageLoad.mainBtnAdd is null in debug mode.

    Thank you

    Raul

    Oh and Yes your button is known that once the page is rendered. To solve your problem you add to the bean (Boolean or string) which then reference you via el of the property of button on the properties page. In method you you set just the properties of the bean.

    Timo

  • Methodically, debugging homework 3 part 3 coding

    I am convinced that homework 3, part 2 has been completed and the customer (ECPG - s) ran successfully data display in the putty window.

    If the material and the Raspberry IP configuration is stable. I would like to simplify the troubleshooting steps encoding for reading GPS data, perhaps display the data received in each method and have a map of what it should look like. Are there more references than the "events-data-message-doc' or maybe a part of the video to help with this?

    OR, if a person can offer a suggestion for the not to step in each of the sections of code using "System.out.println", points of rupture or a good system for tracking data through each method (readDataLine, geRawData, getPosition, getVelocity, etc.) is easier to see where the code has problems. To start receiving data, the class AdaFruitGPSUARTSensor must be properly implemented, that close at the end of part 3 and after my coding problem. Perhaps, I placed some features in a fault method. I'm having difficulty to assess that.

    Mike

    I'm not sure what you mean by 'events-data-message-doc' and I don't recall videos specifically on debugging that presenters have used the println command to display data.  However, there are two ways to debug using netbeans.

    First of all, make sure that you have used putty to connect and then the Java ME 8.1 on the IPD has begun and that you have connected your RPi in connection of Device Manager. Nothing will work if you don't do these things first.  You're right, there are two ways to debug.  1. use println.  2. use breakpoints.

    The easiest way is to use println statements.  I use readDataLine as an example.

    Here is my readDataLine method:

    protected String readDataLine() throws IOException {}

    String dataLine = null;

    dataLine = serialBufferedReader.readLine ();

    If (dataLine.startsWith("$")) {}

    return the data row;

    } else {}

    Returns a null value.

    }

    }

    To print the string dataLine, first place your cursor on a line after that the variable data is defined.

    Then type safe (this is a shortcut to the println command).  Don't hit back.  Just type s o u t)

    Then click on the tab key, it develops the shortcut in a full range of valid code.  Your cursor will now be inside a set of quotes.

    Type something like this 'dataLine = "+ data line inside the parens competence.

    Now, your code will look like this:

    dataLine = serialBufferedReader.readLine ();

    System.out.println ("dataLine =" + dataLine);

    If (dataLine.startsWith("$")) {}

    This indicates Java to print the characters ' dataLine = "in the console, then print dataLine.". "  Notice how I put a space before and after the '=' for readability.  You can ignore these spaces if you want.  In fact, you could shorten the whole line and print System.out.println (dataLine); If you don't want to have any explanatory text.

    Now, run the code.  When your code hits this spot dataLine will print on the console.  You can view the console in at least 3 places: 1. The Putty window.  2. in the EmbeddedExternalDevice1 window, click Exit.  3. in the window out into Netbeans.  If you don't see it, click/Window/Output, or press Ctrl and 4 at the same time.  I like the method 3 the best because I can do this in Netbeans without having to open other windows and cluttering up my screen.

    The next method is to use breakpoints.  It's more complicated, but much more powerful.

    To set a breakpoint, see the grey border immediately to the left of your code.  On my Netbeans, this gray area has line in numbers because I said Netbeans to display line numbers (view/show line numbers).  If you have not enabled, the gray area will have nothing in it.  Click in this box to the left of the line you want to add a breakpoint to.  If a red square appears, you have set a breakpoint.

    To activate the breakpoint, you must run your code in debug mode.  If you run the code in the normal Run mode, no breakpoints will activate.  To run code without breakpoints, I click the Green Run button upwards in the toolbar.  Click on project/running, or press F6.  These methods do not enable breakpoints.

    To run in debug mode or click the icon to the immediate right of the Green Run button (it has a picture of a breakpoint and a small green triangle of race), click Debug/Debug project or press Ctrl F5.  Each of these methods should start your project in debug mode.  It runs like it did when you run the project normally, but he's stopping at breakpoints, and it may work a little more slowly because it is now followed for breakpoints.

    Once the breakpoint is reached, the three windows should appear in your code: watches, Variables, breakpoints.  Variables window shows the variables that are in scope at the breakpoint.  If you put a breakpoint on the line after the variable data is defined, you can see the contents of the row of data in the variable window.  Note: If you put a breakpoint on the line of data in row = serialBufferedReader.readLine (); you don't WILL NOT read a value of dataLine because it has not been defined until this statement has been executed.  So move your breakpoint to the next line.

    There is much more to say about debugging.  Here is a link a page describing more information about debugging using NetBeans.

    http://Cobweb.cs.uga.edu/~shoulami/SP2009/cs1301/tutorial/NetBeansDebuggerTutorial/NetBeansDebuggerTutorial.htm

    Answer this, if you have any other questions.

  • Location of projects Oracle - reusable codes and impact assessment

    Hi all

    We have a new requirement in Oracle projects-

    Our Client is implementing a new unit of operation for localization in a geographical area. He has been before, working unit and organization for this geographical area. What they want - there will be a relationship one between the new agencies and previous organizations (i.e. projects in old_org1 will be transferred to new_org1). So, to implement this.

    All projects (as well as the members of task and key) must be copied with the same project number and name (old ones must be invalidated by prefixing a code in the project number and the name of the project)
    Agreement and Budgets need to be copied. (The amount referenced against the budget should be same in all nine)
    Events must be copied with bill existing and amount of income. If the events are billed / income distributions, this should be changed.
    We are not yet decided if we will need to copy the expenses and other elements of the transaction (such as invoice or income lines lines).

    We are looking for APIs to accomplish these tasks.

    If anyone can help us with the reusable codes and guidance on Impact assessment in this scenario. We would especially like to know will there will be no impact on OTL if we copy the projects using the above method.

    Please let me know if detailed description is necessary.

    Kind regards
    Anand

    Hello

    I understood that you plan to create a new operating unit and move the activity of the existing control unit to the new. The solution that you plan to take is very risky and complex. It is compared to reimplementation and lose a large part of the integration with purchasing, accounts payable, accounts receivable, etc. OTL.
    You can compare that with the alternative, which allows localization on the existing control unit features.

    If this is not possible, you might consider letting all existing projects and their links to the existing po, ap, otl, ar etc within the existing control unit. After you create the new unit with its localization features, allow existing projects which will be charged by the new operating unit, or update the Organization owner of existing projects to the new localaized operating unit.

    Dina

  • Command button action is bean method. How to pass the ID parameter or reference?

    JDEV11gR1PS1/ADF

    The action of the button order is bean method, as follows:
     <af:commandMenuItem id="gbl_cmi_1" action="#{tbBean.action1}"/>
    Bean code is something like
    public String action1() throws IOException {
...
if (id.equals.("gbl_cmi_1"))...
}
    Therefore, I would like to be able to know what the CommandButton ID, to be used in the assessment, etc..

    The reason is that several commandButtons are actually built dynamically as well and the action can be a redirect to URL. Therefore, I use the id to find what URL to redirect to.

    Ideas?


    Thank you.

    To do this, you have to use set listener(af:setPropertyListener) property to set an attribute in your bean or you use an action instead of the action listener (here you can get the source of the event).

    Timo

  • ILearning Issue::Object does not support this property or method

    Hello
    I use the ilearning Oracle Partner Network site facility. After completing the course on ' Oracle Application Server 10g R2: IT increase flexibility with process Orchestration, Business Activity Monitoring and business rules ", when I'm doing the exit test, the test page does not load with the following error:"
    Line: 1229
    Char: 1
    Error: Object doesn't support this property or method
    Code: 0
    URL: http://ilearning.oracle.com/ilearn/en/assessment/jsp/test_player.jsp?
    LMS_URL = http://ilearning.oracle.com/ilearn/en/learner/jsp/lms.jsp

    Software used:

    OS: Windows XP SP 3
    Internet Explorer Version: 7
    Java runtime environment:
    Java plug-in 1.6.0_11
    Using JRE version 1.6.0_11 Java hotspot Client VM
    User home directory = C:\Documents and Settings\Kaustav
    ----------------------------------------------------
    c: clear console window
    f: finalize objects on the finalization queue
    g: garbage collection
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: Hide console
    r: reload the policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: delete the cache of class loaders
    0-5: set the level of trace to < n >
    ----------------------------------------------------


    Oracle iLearning LMS Applet 5.1.0.0.1

    What should I do? I have checked internet options and that you do not find a problem!

    This is related to the issue of Sun JVM Plugin with updates of the 1.6 version 10 and 11 which apparently should be fixed in the updated 12.

    For now, you can do the following and it should work:

    In the java Control Panel (uncheck):

    Advanced-> Java plug-in--> activate the Java plug-in of new generation (requires a restart of the browser)

    as shown here:

    With content W SCORM Version the most recent error of Sun's Java (1.6.0_10)

  • Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

    Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

    Hi cmscan,

    Thank you for using communities of Apple Support.

    I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

    You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

    Have a great day!

  • purchase fail because I used to pay by gift card iTunes, so I chose any of the theme of credit card. Credit is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

    purchase fail to cause I used to pay purchase iTunes gift card, so I chose any of the theme of credit card. Credit card is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

    You should be able to make in-app purchases with gift cards. What happens when you try to do?

  • Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

    Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

    You must pay your debt first.

Maybe you are looking for