Assign unique external ip between Beach and VM

Similar Questions

• sharing an external drive between XP and Windows 7

  Can I write music files on an external drive using an XP PC, connect the drive to a Windows 7 PC and play the files without too much hassle?

  Hi MarnaG,

  · Are the two computers connected to the network?

  · What is the file format of the music files you are trying to copy?

  Yes, you can copy the music files on an external drive and even connect to windows 7 computer and use it.

  You can check the link below: how to copy music to and from an audio CD in Windows XP:http://support.microsoft.com/kb/297015

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How drive letters are assigned to external drives and file path names?

  How drive letters are assigned to external drives and file path names? MyBook is a drive letter (M) when it is connected to my desktop computer and another letter (L) when it is connected to my husbands office, USB key has the same letter, no matter what usb port is used. Is the letter assigned when the file is created and does not change? or is it to the port to which it is connected to? in what computer?

  Each computer assigns the player to the first drive letter not used in alphabetical order.  It makes no difference what port it connects to.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• error when reading flat file of external table... "ORA-01849: time must be between 1 and 12"

  My question is - is it possible for me to fix this error at the level of external table definition? Please advice

  Here is the data file I am trying to download...

  KSEA | 08-10 - 2015-17.00.00 | 83.000000 | 32.000000 | 5.800000

  KBFI | 2015-08-06 - 15.00.00 | 78.000000 | 35.000000 | 0.000000

  KSEA | 08-10 - 2015-11.00.00 | 73.000000 | 55.000000 | 5.800000

  KSEA | 08-08 - 2015-05.00.00 | 61.000000 | 90.000000 | 5.800000

  KBFI | 2015-08-06 - 16.00.00 | 78.000000 | 36.000000 | 5.800000

  KSEA | 2015-08-07 - 18.00.00 | 82.000000 | 31.000000 | 10.400000

  KSEA | 08-10 - 2015-00.00.00 | 65.000000 | 61.000000 | 4.600000

  KBFI | 08-08 - 2015-07.00.00 | 63.000000 | 84.000000 | 4.600000

  KSEA | 08-10 - 2015-15.00.00 | 81.000000 | 34.000000 | 8.100000

  This is the external table script

  CREATE TABLE MWATCH. MWATCH. WEATHER_EXT ".

  (

  LOCATION_SAN VARCHAR2 (120 BYTE),

  DATE OF WEATHER_DATETIME,

  NUMBER (16) TEMP.

  NUMBER (16) OF MOISTURE,

  WIND_SPEED NUMBER (16)

  )

  EXTERNAL ORGANIZATION

  (TYPE ORACLE_LOADER

  THE DEFAULT DIRECTORY METERWATCH

  ACCESS SETTINGS

  (records delimited by newline

  BadFile "METERWATCH": "weather_bad" logfile 'METERWATCH': 'weather_log '.

  fields ended by ' |' missing field values are null

  (location_san, WEATHER_DATETIME char date_format DATE mask "YYYY-mm-dd - hh.mi.ss", TEMPERATURE, MOISTURE, wind_speed)

  )

  LOCATION (METERWATCH: 'weather.dat')

  )

  REJECT LIMIT UNLIMITED

  PARALLEL (DEGREE 5 1 INSTANCES)

  NOMONITORING;

  Here is the error in the weather_bad which is generated files...

  	column WEATHER_DATETIME of 55 error processing in the 1st row to the /export/home/camsdocd/meterwatch/weather.dat data file
  	ORA - 01849ther_log.log 55 56 error processing column WEATHER_DATETIME in the row 1 for the /export/home/camsdocd/meterwatch/weather.dat data file
  	57	56 ORA - 01849ther_log.log: time must be between 1 and 12
  	58	column WEATHER_DATETIME 57 error during treatment number 2 for the /export/home/camsdocd/meterwatch/weather.dat data file
  	59	ORA-58 01849: time must be between 1 and 12
  	60	column WEATHER_DATETIME of 59 error processing 5th for the /export/home/camsdocd/meterwatch/weather.dat data file
  	61	ORA-60 01849: time must be between 1 and 12
  	62	column WEATHER_DATETIME of 61 error treatment in line 6 to the /export/home/camsdocd/meterwatch/weather.dat data file
  	63	ORA-62 01849: time must be between 1 and 12
  	64	column WEATHER_DATETIME of 63 error treatment in row 7 for datafile /export/home/camsdocd/meterwatch/weather.dat
  	65	ORA-64 01849: time must be between 1 and 12
  	66	column WEATHER_DATETIME of 65 error treatment 9 for the /export/home/camsdocd/meterwatch/weather.dat data file online
  	67: time must be between 1 and 12

  My question is - is it possible for me to fix this error at the level of external table definition? Please advice

  Yes it is possible.  Let's not your date mask.  You're masking for 12-hour format when your data is in 24-hour format.  Change the mask of your date to be "YYYY-mm-dd-hh24. MI.ss ".  Notice the change in "BOLD".

• Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

  Hello

  How can I switch between NVIDIA and INTEL graphics cards?

  PS
  I have already installed all the drivers, but I can see that INTEL the card used chart!

  * OS: Windows 8.1 x 64
  * NVIDIA driver: 340, 52-portable
  * DirectX: 11

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Color change of values between Illustrator and InDesign

  I have googled and looked here for an answer to my question, but have not been able to find anything.

  I designed several pieces of encumbered asset, all using the same unique color. Some of the pieces I designed in Illustrator and the other in InDesign.

  The problem is, when I copy and paste the yellow color value (if it is RGB or CMYK - I tried both ways), it CHANGES between Illustrator and InDesign. The color stays the same between Illustrator documents, but if I C + P InDesign - or vice versa-, the color value change literally before my eyes. And I don't want to say 'looks like' different, real changes in number.

  Here's a real example:

  Call a box in Illustrator and chose the color #f8f1e0 / 2% 3% 12% 0%. Call a box in InDesign, C + P had the values of color in there, and it DID change the color appropriate for a moment. You click OK. Click New in the color picker and color is now #f8f1e1 / 2% 3% 11% 0%.

  If it is relevant, it seems that the color will change to a slightly darker every time.

  And Yes, the two documents has STARTED OUT as CMYK documents and stayed like that. I also have my color sync via Bridge. I'm working on CC 2015 and all programs are up to date.

  Any idea of what could happen? Thank you in advance.

  ETA: Okay, I just chose preview overprinting in Illustrator and also changed the color of #f8f1e0 to #f8f1e1. I see now this is not a malfunction of the program, but can someone explain WHY this happens? I'm still new to color management and it's quite confusing for me. Thank you once again.

  ETA: thing: when I save the InDesign document to readable PDF and then pull it in Illustrator, the color is now #f8f2e2, even when you preview overprinting.

  Hexadecimal values are RGB color, so if you plug one in the color chart the resulting CMYK values are a conversion of the color management of the profile the document CMYK document RGB profile. You will get different CMYK conversions according to the profile source RGB, CMYK destination profile, intend to color and compensation of the black point used for the conversion.

  In addition the InDesign documents can have colors RGB and CMYK with CMYK and RGB profiles assigned that do not necessarily correspond to the color settings work profiles, in order to sync'ng your color settings may not get everything to match.

  Ultimately if you want to match the CMYK color or nuances between AI and ID, make sure you document assigned CMYK profile matching (Edit > assign profile...) and enter CMYK and hex does not values

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Ideas on how to create a sine wave between 0 and 10 V with NI 5412?

  Hello

  I tried to create a sine wave from 0 to 10 volts on a 5412 OR. I have 2 problems and I have a question:

  (1) I can't generate a waveform with lag, even when using the examples of NEITHER.

  (2) the value of the offset, that I can set the camera is of +/-25% range of amplitudes. Do I have to create an arbitrary waveform myself?

  (3) in the brochure it says I can get 12 v peak-to-peak. Does this mean that it is between-6 and 6, or it is between 0 and 12?

  I would appreciate it if I could see an example.

  Thank you very much.

  Hi, several notes:

  (1) the peak to peak voltage is 12V. For example, it can operate between 0 - 12V.

  (2) the shift of 25% limit is for a given wave. That means assuming that it will create a wave, it cannot compensate for 25% of the beach. The solution is to create an arbitrary wave (e.g. a sine between 0 and 10 V) and the function generator to create rather than attempt to compensate for a sine wave.

  Thanks for the help though.

• MWI delayed power on and off between 5 and 40 minutes

  Unity 4.0.2 unified exchange 2000 tsp 7.02 call Manager 3.3 single does site no cluster

  Hi, I have incorporated the above but got 1 problem of stuborn. the mwi on and off voltage indication are delayed by between 5 and 40 minutes, this problem is related to all users. the problem is internal and external calls. I had this problem of troubleshooting for several days. tests indicate that the message does not appear in the unityMTA but takes about 1 minute to appear in the outlook-box users, when I do a refresh on the light lamps work properly. There is no error on the area of the unit or the gc/dc boxes or e2k clients, but several positions designed, it may be DNS. I tried to add files hosts with no joy. basically is there any way that I can retry the record to know what is happening, or is it possible to force a lamp after so many seconds as a work-around. Thank you. Jim.

  I wonder if the Exchange is slow to tell us...

  In the directory \CommServer\TechTools there is a tool called MBXSuite.exe. Once you open MBXSuite.exe select the mailbox you want to monitor. Choose the account that runs the AvMsgStoreMonitorSvr as for RunAs. Click Notifications, and then click mailbox to logon.

  Once it's done leave a new message to the Subscriber. How long does it take to see you

  Notification received

  TABLE_ROW_MODIFIED

  ?

  Thank you

  Keith

• How to share a VM in an external drive between machines?

  I want to save a VM (Ubuntu 14.04.1) in an external drive and use between iMac and MBP.

  There will be a problem?

  All of the recommendations, if any, on how to ensure that it can be used on both machines?

  Using vmfusion 6.0.4.

  If you are going to move the virtual machine between different computers, then always stop, not suspend, inside guest OS (just as if it were a physical machine) and then closing VMware Fusion before disassembly/ejection of the external drive.

  Add the following option in the configuration .vmx so you are not prompted with the message moved/copied.

  UUID.action = 'keep '.

  Take a look at: changing the file .vmx for your VM of Fusion (1014782)

  Note that 'keep' is as if you said "I moved it" vs. "I copied it" who would 'create '.

  In addition, you should avoid moving between systems with snapshots as there can be problems, attempt to restore a created on a system while running on a different system so created.

• Difference between calculating and strength calculation.

  Hi friends,
  
  Can someone please explain to me what is the diff between compute and calculation of the Force.
  
  Kind regards
  Kiran

  Hi Kiran,

  The option calculate is only available for the cells for which the data have changed because the cells were calculated last. You can use the option Force calculate to calculate the cells for which data has not changed. For example, a cell uses a formula that calculates the current value of period based on the value of previous period. If the value of the previous period is changed, you can use Force compute to recalculate the value of the current time.

  The option calculate Force Force rules to work only on the selected value member and a member of value upon which it depends. For example, calculate the Force on currency of the entity running rules on the entity member of currency only. Calculate force on the currency of the total entity executes the rules on the currency of the entity, entity currency adj and currency total entity. Calculate force is the only command for which it is possible to assign only a single member of a triplet of value

  Kind regards
  Honorine Ginette

• Sharing the values of substitution variables complex between ASO and BSO of databases

  We ASO and Essbase BSO names of members of database with spaces in and need to store some of these member names in the substitution variables. However, this should be done differently for ASO and BSO, due to script syntax calc requiring double quotes and MDX requiring hooks. For example:
  
  ASO:
  & CurWeek value = 1 week
  MDX: [& CurWeek]
  
  ASF:
  & CurWeek value = "week 1".
  Calc script: & CurWeek
  
  Therefore, the substitution variables can be shared between ASO and BSO, cubes because the value of the variable BSO requires double quotes because of the space in the name of the Member.
  
  Is there a way to get the above to work with ASO and OSB? Unable to escape the quotes in the calc script syntax? Or double quotes can be removed in the MDX formula?

  Yuck! I'm curious to see if someone has a really elegant solution to this. :)

  I'm sure you have seen this already, but a workaround is to create an alias that is not a space (or probably better, use a name without a space Member but leave some space in the alias).

  What is your specific motivation to avoid the solution two variables? If it is purely of synchronization, do not forget that even with a variable unique no guarantees of the formulas of Member ASO and BSO calc scripts will be always synchronized without a response, because the formulas (by the SER60) pick up not a new value until the application is restarted.

• Sharing catalogs between Windows and OSX LR4

  I recently started using Lightroom 4 and was disappointed that I was unable to share my catalog between Windows and OSX as I could with LR2 and 3. The structure of the files has changed somehow? I mainly use a Windows computer at home, but when I travel, I have a MacBook Pro with the Mac of the LR4 version. All of my photos and catalogs are stored on a USB 3.0 external HARD drive. Although load catalog on a Mac shows all of my folders as question marks. It seems that Windows reads the disc as an indicator of the letter, ex. D:\ and OSX it reads as a volume. Used to before that this was not a problem. Does anyone know in a different way, I can get this to work specifically with this program. I already know that I can just download Boot Camp on my mac and run it like this.

  I think I found the answer to my own question. The catalogs that I have problems with were created with beta versions LR4. I just created a catalog using LR4 4.3 and loaded on the Win and perfectly good OSX. Hope this helps if anyone wants to try this out.

• What is the difference between ActionEvent and SelectionEvent?

  Technical environment:
  Oracle jDeveloper 11.1.1.4.0
  Windows XP
  ----------------------------------------
  
  I think there is something behind ActionEvent and SelectionEvent which makes my code does not work.
  
  Here's my problem:
  
  I have three tables. One is a masterpiece, contains the summary of something. If I select a line on this chart, the second table shows some data, based on the line selected on the first table. Well Yes, it is a ViewLink, and it works perfectly. Now, I want the same thing to work between the second and the third table. If I select a row in the second table, the third table should show some data, based on the line selected on the second table. The third table is a ViewObject with some binding settings. I need to assign values to these parameters, that I get the value of the line selected on the second table. How can I do this?
  
  I tried to use ExecuteWithParams. Select the line in the second table, get the values, pass it in the form ExecuteWithParams, run and... it works... I get the result on the third table. Here is the code how to:
  
  ***
  {} public void updateTableEvent (ActionEvent actionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  But when I tried the same thing on SelectionEvent, I did nothing... no error and also no results. What I want is just to select the line on the second table and get the result on the third Board, not any pressure from button. Here is the code:
  
  ***
  {} public void onRowSelect (SelectionEvent selectionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  Then. What is really going on here? What is the differece between ActionEvent and SelectionEvent? Why did give me answer of difference?
  Thanks for your comments.
  
  
  Kind regards
  Novan Ananda

  Hello

  did you tried third table PPR.

  Simply give the id from table2, table3 partialtrigger.

• R12: Differentiate tax between AP and AR module

  Hello
  
  Can anyone help me how to differentiate between tax between AP and AR module? When I went through details of the taxes in the Bill on tax LOV (AP) workbench or tax classification LOV in form of distribution in the workbench (AR) of the transaction, all taxes are mixed together in the two LOV. I had found the similar thread in this forum, follow the instructions, but I am always faced with the question. This is the step I did:
  
  -create the third tax profile (legal person of first part; and control unit with the basic tax content)
  -Set the tax system
  -Set the tax (owner of global configuration; for all of the taxes)
  -Set the tax status
  -Set the tax jurisdiction
  -Define the clawback rate
  -Set the tax rate
  -Define the rules (I tried to put in the type of rule applicability tax determined with even claims of class and to pay for each tax; still not training)
  -to provide the tax
  -create default and owner configuration options control taxes and options of application fees
  
  Please let me know if any step is missing.
  She really appreciates your help.
  
  Thank you
  Hansen

  Hello Hansen,

  I found this note on my Support:

  "R12. EBTax. How to differentiate the Code of tax rate for debt and Credit Transactions in the fiscal Classification Code LOV (list of values). [756985.1 ID]

  Tax Classification Code LOV (list of values) shows all the tax rates that are created in EBTax. You must choose your code of tax rates to the list of the fiscal classification code values in the accounts payable or receivable. How the difference rate Code tax for transactions in accounts payable and accounts receivable in the tax Classification Code LOV?
  * Solution *.
  Please note that in R12, there is a centralized tax engine. Tax implemented in EBTax will be and can be applied to both accounts payable and accounts receivable. Created by EBTax, no matter what tax rates will be available as a tax Classification Code LOV in these two applications. It cannot be applied and this is the intended function.

  If debts and receivables exist with unique operating units then the MOAC security settings can be used to restrict the LOV. In addition if EBTax is properly set up the fiscal classification codes will not be used for the determination of the tax except in the exception based scenarios. Please see the case study in *577996.1 Note* for examples

  I just install ebTax using tax codes for AR and AR and, right now, these two modules tax codes are shared on the LOV. We used a convention for naming code... but I'm looking for notes 577996.1

  Kind regards.