Assignment card ID when you use Version control
Hello
We use RH11 with version control (two of us were allowed to use HR) I am wanting to assign the ID card in our project. I created the card number, but when I assign to a topic, I get the following message.
"Files in the list below may not be retrieved from version control. Exclusive access to these files is necessary to perform the selected action.
The file in the list that refers to a the extension .ali
Is this to say that because there are two of us with HR that can access the project that I can't do this? Or is it because of version control, I can't do this? I really don't understand why? I hope that there is an expert who can enlighten me!
Thank you, Louise
There are two reasons that this behavior occurs normally:
- The file is extracted by the other author. This occurs when you try to add a new id card at the same time. If the author of other controls throughout the project, you should be fine.
- The file is somehow outside the control of source code. In this scenario, your source control link has issues. Try to open the Source code control application to see what is happening.
You can also try check all of the project, before you add the id of the card. Who help me?
Tags: Adobe
Similar Questions
-
Dear whom it may concern,
I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?
Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.
Thank you
Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.
To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.
-
Not using laptop Satellite A665 3D 3D when you use WinDVD BD (3D version)
Hello
I bought the laptop A665 3d and loaded the Nvidia drivers for the 3D provided with the laptop package. The slide show after you run the wizard 3D grand worked full 3D and 3D of TOSHIBA VIDEO PLAYER worked as well (when you use one of these you see 3D glasses come to life) but I can get t a blue disc 3d ray to work using the player pre-installed.
Installed WinDVD BD (v10), it says it supports 3D and in options, it has a 3D tab which configuring 3D top of page option is set to off but it is also grayed out so that you can t change.
I have 4 movies in 3D on Blue ray and none work. They show the blurred image on the screen but the glasses don t seem to turn it on.
I TRIED enabling 3D on the start menu.
The upgrade of WinDVD BD
Looking for help and not where it mentions 3D.Which version of the nVidia Driver is currently installed?
Download the nVidia driver updated on the Toshiba site to the www.csd.toshiba.com
-
When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.
They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.
I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.
I would appreciate any help on how to proceed.
Thank you
Paddy
I do not understand your post. Your use the FC300 to control logic - how is it connected? Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface? (sense are the keyboard and the FC300 connected independently.
When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).
First thing to do is to circumvent the control surfaces to exclude...
Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.
-
IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)
According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.
When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.
What I have confirmed:
-Camera is switching between inside and outside triggering.
-NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.
When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:
Code :-1074397150
The possible reasons for a timeout.
Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?
So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.
-
When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.
Hi marion_librarian
Thank you for using the Microsoft Answers Forums!
This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.
In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.
Check the link for more information:
Explore the features: Parental controls:
http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx
Set up Parental controls:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls
NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.
1 click-right on the taskbar and open the Task Manager.
2. Select users
3. right click on the user name you want to disconnect, and then click close session.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.
Francine simply connect to the internet periodically to receive updates and validate your membership. If you have an annual membership, you can be disconnected until 99 days. You can find more details in the help of Activation & deactivation.
I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.
-
loss of control ipad (screen magnify in-app Youtube kids) when you use a bluetooth headset
loss of orders for ipad from tap - specifically screen expand in the Youtube kids application when you use a bluetooth headset
I would contact with the helmet manufacturer or the helper application developer. Maybe it's that the app may need to be updated.
Barry
-
MacBook Pro 5.5 crashes when you use multiple applications
Then my macbook pro 5,5 I upgraded to snow leopard at el captian started planting after that I updated when you use multiple applications (virtual dj 7.0.4 safari 9.1 and the version of microsoft word 2011 14.4.2).)
I removed the old hdd and put in a ssd 250 GB and a new battery with the snow leopard a long time ago, before I upgraded to the new operating system. It seems to me that what is blocking it is intensive use the safari app and another intensive resources such as virtual dj application.
I have reset pram/vram and uses firefox now...
the computer and the new el capitan are beautiful, I really feel like im going to get a lot out of this operating system, and it gave new life to my computer, but the crash problem when using multiple applications is too often. Can I submit some reports if necessary kernel panic?
Anonymous UUID: 9C21D886-B7E1-F5A6-463E-8CBCF325C9D9 Sam May 21 18:31:15 2016
Panic report *.
panic (cpu 0 0xffffff80115ce40a appellant): Kernel trap at 0xffffff801192a3b3, type 14 = page fault, registers:
CR0: 0X000000008001003B, CR2: 0XFFFFEF802CCD9C40 CR3: 0X000000001320B000 CR4: 0 X 0000000000002660
RAX: 0 X 0000000000000000, RBX: 0XFFFFFF802B945780 RCX: 0XFFFFEF802CCD9C08 RDX: 0 X 0000000000000000
RER: 0XFFFFFF911BE53D00, RBP: 0XFFFFFF911BE53D20, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF802B8FEAF0
R8: 0 X 0000000000000000, R9: 0 X 0000000000000003, R10: 0 X 0000000000000000, R11: 0 X 0000000000000026
R12: 0XFFFFFF802B945780, R13: 0 X 0000000000000000, R14: 0XFFFFFF911BE53E18 R15: 0XFFFFFF802B8FEAF0
RFL: 0 X 0000000000010282, RIP: 0XFFFFFF801192A3B3, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010
Lack of CR2: 0xffffef802ccd9c40, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0
MP = 0xffffff8022e00000, phys = 0x1367a000, prev (0 x 7: 0 x 11313000 - 0 x 11400000)
VP = 0xffffff802b945780, phys = 0x1bd310780, prev (0xb: 0xffffc000 - 0 x 100000000)
0xffffff8022dff000: oQAAAMsAAAAAAQAAqWwqIgAAAAAZMSk2QACp3wEAIjAAAAAAgAAAAFDw0ND1AAEACwSEgAoDAQNYXJr c9QABAAsMhMAKDwUD0FD5 / PUAAQALDETACg8FA + DQ9fz1AAEACwxEwAIDAQPQ0PX89QABAAcMhIAJAwE DoECKzPUAAQAPDISACgMBA1Bw1vz1AAEADwxEwAoDAQNwUPbc9QABAA8MhIAJAwEDoCCq3OUAAQALDIS ABQ8FA9DQudz1AAEABwxEwAoDAQNYXNbc9QABAAsMRMAKAwEDUFDW3PUAAQAPDETACQMBA9Dwuvz1AAE ADwSEwAoDAQPQ8Obc5QABAAsMhMAJAwED0ODW/AjJ5SKA / / / OB3SEQEAAQBjb20uYXBwbGUuZmxvdy1 kaXZlcgAAAgAAIAAAYG6GEbBzhhHQ8N8i5DsAAO + rd5BTEwACKiaIyrhQFcYNdERSLVmIoD / / / 8IAfI iAAAABwoAAACQb5YRAPnGIu ++ rd4QNdERKMlmIggC8iIoed8iQPbGIhA10REIA/IiuHffIogkcSogNdE RCA7yIgi2ZiKA / / / AAAABgUAAACA + MYicIMAAHySAADvvq3eyLZmIoD / / / 8IBfIiAgAAAwMAAAAIDPI iAAAAAgIAAABotmYigP / / / wMAAAMEAAAAQPjGInCFAABwgwAAcIgAAHBQAADvvq3eKuFAVxA10RGotWY igP / / / 8D4xiLvvq3eCADyIgAAAAgLAAAAEE +. WERg10REISfQiAAAACQwAAAABAAAJDQAAAED5xiLvvq3 eCLNmIghH9CIAAAAEDgAAAJQkcSoq4UBXGDXREaiyZiIAAAAFDwAAAIkkcSrgDuAg7o4JvgAO6u4LS0B A7uDuDACwAADgBOTkDO4OALCwAADgBITkDgze7gCwsABA4ASEDt7vDgCwsABAwOQE7/6/DkDA5ATuAg4 NsAAAC + QEhOzuDw4NsAAAC + QEJOyyDg4C9OT + 4OcOAAAAAABLBITs7uwODg2wAAALBITk7gcODQ4AAAt LBITsfu7n7u4ODktA5Ow + 4A0OALBLQOAA7tPuA7CwAADo0BEA/ycAOPADjz8CoIMdwAzzP AIQBqABwA Y8sxTDvLMUw7gDNAWAQBKAAkAswzAgDMAbQWADIATcACAPgMOBLQVAGgAagDAAvMM4AgAGBgFgBCA8QU OAtgWAIABLAAIECAA4AhgGwEgAAhAB0AAECQADgLYFgAIAAIn4AzQFgEgDDioE4AA6KQzD + AIABgYBYA YgAAnD8/I8wzyPAMOAgAWAOgBBhjzlCMP8yzzDOAIABgBIIkAgPwPDgLYBjgBAA4U6KQDDgLYFgAIAgo Q6XwDAAAA
0xffffff8022e00000: IUMAABAU4CIAAID / / / 8EALi80BEIAID / / / 8MABp7AAAQAP / / / 8kAPBixxEoAID / / / 8sAOBVxhEwAID ///80ALCUoS1AAID///9EAKBXlCtIAID///9MAAAPlCtQAID///9UAIDJ6CJYAID///9cAGAA4CJoAID ///9sAADQgARwAAAA3YB0ABAAAAB8AAAQAACEAAAAEACIAEBXoAOQAHXTCQOYAHXZCAOgAMt9lwCoAD5 XoAOwAHXZCAO4AAIAAAHAABEAAADEAGhmcwDUAC8AAADkAC9kZXbkBC9kaXPoBGswczLsBAEAAADkCAg A6SL4CID / / / 8CAAAAAIACQAAAAIECQABAAAICQABAAAMCQAAQAAQCQAAQAAUCQMAAAAYCQACAAAcCSA AAAAgCQEAAAAkCRIOAABACdh4AwBICRIOAABQCYh + AwBYCQAAACFoCf / / / + ECVDK6CKICYD / / / + MCQE AAACYCQEAAACsCUAy4yLQCYD / / / UCQIAAADwCf / / / 8sCkgK4CJQCoD / / / 9UClgK4CJgCoD / / / 9kCmg K4CJwCoD / / / 90CgAQAAB4CgABAACECgAA
0xffffff8022e01000: cAAAAIMAAACbAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AJBweH4AAAAAAAAACAACIBChIiEwKD2r/EgbMAAmkEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwMAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHh8Jx80AJgAAAggAKDQhExR8Fj 8iUdIxJZ9pd9V/5 X/Vf9W/1 X/Vf9l/5r/Vf + V / wAAAgD / DwAAAAAAIf / / / 8A9sYiAgAAAACg0ySA / / / AADgIkABAACgg8YRoFbGEbDE6CLAMyErUMzoImAU4CIAEBAEABAQAOi/dSJkZXZmL2RldgAAAgD/DwA A6xQEAAAAACH / / / PwAAAIA + 4yIwzOgidOOkA1BzgwA42SaCAJGyAADfG4JAkoMALN8bgqBugwCwkIM AkKyNAKCNgwDgUIgAoE + IACBsiACAgogAAISIAMwAAAzu7u7uDgMOALDgwwAADOzg4w4O7jPuM + 7/u7 u / + 7/7u7 + 7 l/uVe5V7t7l3u7d7t3u3e7d7v3u/R7v7u7oLuEu7iLuIg4CDg4gAAgCAQD + P4DDASBozTk Bc4AAICAEQB8SbQ44DwgAN5DDDj3w / w04fysMOKDACCJg /. g04QIEFB5DAAg0gwgsdAMIIJpACCy8gQw0 4sIMPAUDAAQRgQQ8r4EIMNHCDDj0A
Backtrace (CPU 0), frame: return address
0xffffff911be53990: 0xffffff80114dab12
0xffffff911be53a10: 0xffffff80115ce40a
0xffffff911be53bf0: 0xffffff80115ec273
0xffffff911be53c10: 0xffffff801192a3b3
0xffffff911be53d20: 0xffffff80116f634b
0xffffff911be53dd0: 0xffffff8011927993
0xffffff911be53ec0: 0xffffff801170f81d
0xffffff911be53ee0: 0xffffff80116f99e4
0xffffff911be53f50: 0xffffff80117047d7
0xffffff911be53f60: 0xffffff8011a27fa1
0xffffff911be53fb0: 0xffffff80115eca76
Name of the BSD corresponding to the current thread process: launchd
Mac OS version:
15E65
Kernel version:
15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64
Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839
Slide kernel: 0 x 0000000011200000 Text of core base: 0xffffff8011400000
Text __HIB base: 0xffffff8011300000
Name of system model: MacBookPro5, 5 (Mac-F2268AC8)
Availability of the system in nanoseconds: 3602233285655
last load kext to 2442165091688: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)
Finally unloaded kext to 2529727624548: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)
kexts responsible:
com Apple.filesystems.smbfs 3.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 110.21.18
com Apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 274.7
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOBluetoothSerialManager 4.4.4f4
com.apple.driver.AppleSMCLMU 208
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 274.7
com.apple.driver.AppleLPC 3.1
com.apple.GeForceTesla 10.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleBacklight 170.8.9
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 245,4
com.apple.driver.AppleUSBTCKeyboard 245,4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
com.apple.driver.AppleIRController 327,5
com.apple.driver.AppleUSBCardReader 3.7.1
com.apple.iokit.SCSITaskUserClient 3.7.7
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.1.8
com Apple.nvenet 2.0.22
com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.12.6
com Apple.kext.Triggers 1.0
com.apple.driver.DspFuncLib 274.7
com.apple.kext.OSvKernDSPLib 525
com.apple.iokit.IOSurface 108.2.1
com.apple.iokit.IOSerialFamily 11
com.apple.driver.AppleHDAController 274.7
com.apple.iokit.IOHDAFamily 274.7
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.14d1
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.iokit.IOBluetoothFamily 4.4.4f4
com.apple.driver.CoreCaptureResponder 1
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 250,5
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.iokit.IOUSBHIDDriver 900.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com Apple.Driver.USB.cdc 5.0.0
com.Apple.Driver.USB.Networking 5.0.0
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7
com.apple.iokit.IOBDStorageFamily 1.8
com.apple.iokit.IODVDStorageFamily 1.8
com.apple.iokit.IOCDStorageFamily 1.8
com.apple.iokit.IOAHCISerialATAPI 2.6.2
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.iokit.IO80211Family 1110.26
com Apple.Driver.corecapture 1.0.4
com.apple.iokit.IOFireWireFamily 4.6.0
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.usb.AppleUSBOHCI 1.0.1
com.apple.driver.usb.AppleUSBEHCI 1.0.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
2.2.9 com.apple.driver.NVSMU
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.2
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
System profile:
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.4.4f4 17685, 3 services, 18 aircraft, 1 incoming serial ports
Crush Bus:
Memory module: DIMM0/0 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5, -.
Memory module: DIMM0/1 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5,--
USB device: USB Bus
USB device: Hub BRCM2046
USB Device: USB Bluetooth host controller
USB device: USB Bus
USB device: Apple keyboard / Trackpad
USB Device: IR receiver
USB device: USB 2.0 Bus
USB device: ISight built-in
USB device: USB 2.0 Bus
USB Device: Card reader
Serial ATA Device: Samsung 850 EVO 250 GB, GB 250,06 SSD
Serial ATA Device: OPTIARC DVD RW AD - 5960S
Model: MacBookPro5, 5, MBP55.00AC.B03 of BootROM, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, MSC 1.47f2
Network service: Wi - Fi, AirPort, en1
Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB
The spare memory that is installed does not respect the specifications of your model (1067 MHz SDRAM.) Please reinstall the original memory, or install the new memory of the correct type.
Any vendor deemed RAM will be a web form where you can select the Mac model and be directed to the compatible parts.
-
I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).
The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.
Thank you
Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.
If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.
Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device. If this does not work, choose the second and provide the information requested on the device. You will be asked for drivers - have their practice. Follow the prompts to install the device (NAS). Make sure that it is plugged in and turned on when you do so, or he not be recognized. It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.
I hope this helps. Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
No video when you use Windows Media Player.
Original title: Windows 7 Media player
When you use the MEDIA PLAYER to play videos I get only the first image and then only the noise that is not image.
any Suggestions?Relevant convenience stores are available to-control panel, troubleshooting services, see everything [on the left], settings of WMP. If you are online when you open it then it will be updated to the latest version of the troubleshooter before his execution [or you can go directly to the online http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooterversion].
- - - - - - -
Unless you run a K, N or KN Windows version [see Panel, System], then there is no download WMP.
Regular updates of Windows include all updates for WMP [for example, the included updated Dec KB2847077 and that was a WMP update]. Ce KB is supposed to be a specific patch for WMP freezing, but some other recent messages indicate it fixed other issues while at least another post said that he created problems [problem WMP] and had to be uninstalled.
- - - - -
If you get completely fed up trying to fix WMP, then you can try these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]
14.1 discharge WMP - Panel, programs and features, Windows features turn on [left] on or off, multimedia functions, clear box Windows Media Player, Yes, OK, restart the PC.
14.2 recharge WMP - control panel, programs and features, [left] turn features on or off, Windows multimedia functions, set the Player Windows Media box, Yes, OK, restart the PC.
-
Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?
This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.
When BindByName undefined, it works as expected.
I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.
I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.
Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.
Please see the example below.
---
Environment (default):
Windows 7 Professional 64-bit SP1
Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT
.NET framework 4.5.51209
Local system: EN - UK (but also does not, EN-US).
Oracle.ManagedDataAccess 4.121.1.0
"< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >
Environment (base):
Windows 7 Professional 64-bit SP1
Updated Visual Studio 12.0.31101.00 //SEE above 4
.NET framework 4.5.51209
Local system: EN - UK
Oracle.ManagedDataAccess 4.121.1.0
"< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >
Call stack:
mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal) mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior) Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown) > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)
Example:
----
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Oracle.ManagedDataAccess.Client;
using Oracle.ManagedDataAccess.Types;
using System.Data;
namespace NoddyConsole
{
public class Program
{
public static int Main (string [] args)
{
Error int = 0;
Errors += Command_ExecuteReader_BindByName_Fails();
Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();
return errors;
}
public static int Command_ExecuteReader_BindByName_Fails()
{
Error int = 0;
Try
{
var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");
var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");
Conn. Open();
IRRELEVANT
OracleGlobalization og is conn. GetSessionInfo();
og. DateFormat = "HH24:MI:SS MON-DD-YYYY";
Conn. SetSessionInfo (og);
var cmd is conn. CreateCommand();
cmd.CommandType = CommandType.Text;
BindByName. cmd = true;
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;
var prm1 is cmd. CreateParameter();
PRM1. ParameterName = "rc";
PRM1. Direction = ParameterDirection.ReturnValue;
PRM1. OracleDbType = OracleDbType.RefCursor;
cmd. Parameters.Add (prm1);
/ * SHAUN.recreate_issue_1 * /.
var prm2 is cmd. CreateParameter();
PRM2. ParameterName = "in_code";
PRM2. Direction = ParameterDirection.Input;
PRM2. OracleDbType = OracleDbType.Varchar2;
PRM2. Value = "A";
cmd. Parameters.Add (prm2);
/* */
var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
/* *-/
OracleRefCursor orc = null;
cmd ExecuteNonQuery()); must fail here
ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;
If (orc is nothing)
throws InvalidOperationException new ("Invalid return the ref cursor type");
var = orc player. GetDataReader();
/* */
While (reader. Read
{
var values = new object [reader. FieldCount];
drive. GetOracleValues (values);
for (int i = 0; i < values.) Length; (++ I)
{
Console.WriteLine(values[i]);
}
}
drive. Dispose();
cmd. Dispose();
Conn. Dispose();
}
catch (Exception ex)
{
Console.Error.WriteLine (ex) Message);
Errors ++;
}
Finally
{
Return (true);
}
return errors;
}
public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()
{
Error int = 0;
Try
{
var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");
Conn. Open();
IRRELEVANT
OracleGlobalization og is conn. GetSessionInfo();
og. DateFormat = "HH24:MI:SS MON-DD-YYYY";
Conn. SetSessionInfo (og);
var cmd is conn. CreateCommand();
BindByName. cmd = true; // ####
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;
cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works
var prm1 is cmd. CreateParameter();
PRM1. ParameterName = "rc";
PRM1. Direction = ParameterDirection.ReturnValue;
PRM1. OracleDbType = OracleDbType.RefCursor;
cmd. Parameters.Add (prm1);
/ * SHAUN.recreate_issue_1 * /.
var prm2 is cmd. CreateParameter();
PRM2. ParameterName = "in_code";
PRM2. Direction = ParameterDirection.Input;
PRM2. OracleDbType = OracleDbType.Varchar2;
PRM2. Value = "A";
cmd. Parameters.Add (prm2);
/* */
var reader is cmd. ExecuteReader();
OracleRefCursor orc = null;
HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
cmd ExecuteNonQuery());
ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;
If (orc is nothing)
throws InvalidOperationException new ("Invalid return the ref cursor type");
var = orc player. GetDataReader();
While (reader. Read
{
var values = new object [reader. FieldCount];
drive. GetOracleValues (values);
for (int i = 0; i < values.) Length; (++ I)
{
Console.WriteLine(values[i]);
}
}
drive. Dispose();
ORC. Dispose();
cmd. Dispose();
Conn. Dispose();
}
catch (Exception ex)
{
Console.Error.WriteLine (ex) Message);
Errors ++;
}
Finally
{
Return (true);
}
return errors;
}
}
}
---
create or replace package THAT SHAUN is
type ref_cur_type is ref cursor;
function recreate_issue_1)
in_code varchar2: = null
) return ref_cur_type;
end SHAUN;
/
create or replace package body what SHAUN
-TTS000233
function recreate_issue_1)
in_code varchar2: = null
) return ref_cur_type is ref_cur ref_cur_type;
Start
Open the ref_cur for
Select UO.object_name from user_objects UO;
Return ref_cur;
end recreate_issue_1;
end SHAUN;
/
---
Thanks a lot to qualify again for me Alex. I'll try upgrading to the latest version of the provider.
The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.
Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.
-
Preview screen turns black when you use the slider to soften ultra key
Hello
I'm working on a video, including a greenscreen. That is why I use the ultra key to make the transparent green screnscreen. Whenever I touch the slider "soften" Ultra key, windos preview blackens. I can't get it back to normal until I restart the first. Version 2015.4.
This issue is being investigated. So far it has been reproduced with acceleration GPU on Windows. What is the case on your system? Also, could you provide your operating system, graphics card and if you use CUDA or OpenCL?
A possible solution is to go into project settings > General and set the Mercury Playback Engine software only, when you use the parameter to soften.
Thank you.
-
What is included when generating with version control on?
When you use the source control, it is possible to generate a presentation of unique source for an "older version"? For example I wrote documentation for a version of our product that must be released in a few days, but I don't want to not generate it in case of last minute changes. In the meantime, I want to continue to work on things for the next release. Is this possible? Or do what I have until I generate appear?
I use RH5 right now, but it can be upgraded if necessary.Hi codesharing.
RoboHelp will generate output files that residents on your pc at the moment. At the time of the generation, HR does not check if the files are up-to-date or not; This happens when you open the project, not when you generate.
Where you're sitting right now, I'd be suspicious of continuous development that you want included in your immediate release. I consider two options to deal with this:
1. Add your new hardware, but apply tags to build it so that it is excluded from your version. You can remove the tags to build later.
2. in the alternative, to clone the project source files that are on your pc now. Keep a copy in a safe place like a copy of archive for your release. (It's probably a good idea in any case.) Place another copy in a new directory, and remove the control code source as follows:
a. delete the following files from the root of the project: mssccprj.scc, projectname.cpd, pblsvrs.sss and projectname.pss.
b. using Notepad, open projectname.xpj.
c. remove all entries betweenand , but let the two tags.
d. close Notepad, and then save the xpj file.
You now have a project that is removed from the source control. You can make final changes before your release in this version of the project and build from here. (Please note that these changes must also be added to your 'real' source controlled as well). At the same time, you can continue with new developments in your project under source control.Theoretically, you should be able to label different versions of your project in the RSC. However, at this stage of the project, I doubt you want to experiment with it. I would go with one of the two options above.
I would certainly encourage store this copy archived your project for all milestone version, just for your own protection against the terrible influence of Murphy's law.
HTH,
G. -
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
Firefox Pei
"C:\Program Files (x 86) \Mozilla" PEINothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.
Maybe you are looking for
-
Portege Z830 - 11J - several questions after Win8 Pro upgrade
Hello I bought a Portege Z830-11J with Windows 7 Pro.I bought the Windows 8 Pro Upgrade and did a very basic * clean installation *. I installed the Windows 8 Pro from scratch a (empty) disk.I checked for missing drivers Device Manager. I did a downl
-
MotoNav TN765t - problem with update (software and maps)
Great device, unfortunately I can't update the software, or even update the maps that I just bought. I tried with my Windows 7 computer and also with my Windows XP computer. I also tried to reboot the device, as well as do a reset. I have the most re
-
HP Probook G3 450: Problem Hp x 64 GB battery
Hi, I have hp probook 450 G3, I want to ask two things. A first, is - it harmful for the laptop battery to use the laptop while charging? and a second, having full battery charge, I plug charger and keep on using laptop, it will be harmful for laptop
-
It is actually in two parts/problems; Maybe (probably) closely related.... And it's weird because it used to work (weird especially when it comes to problem no. 1 b). Problem # 1When I click on an e-mail address embedded (a mailto link :) in some (.d
-
Error so that the update manual xperia to android sola 4
Hello I did the following download and install the latest version of the Fashtool software (flashtool - 0.9.10.1 - windows) and I had installed the .exe drivers in the driver folders and selected all devices and I am not able to flash sola in the new