Associating a sketch of business rule in the EA

Similar Questions

• Delete the business rule on the list of planning application business rules

  Hi all
  

  
  

  It is Hyperion planning 11.1.2.3 500, Classic application.

  
  The business removed from the calculation Manager rule is not available in the calculation Manager but still available in the list of planning application business rules.

  Any suggestion is appreciated to get it removed the application too.

  Note: EPMA, to deploy the application, but not safe for the classic.

  Kind regards

  Deker P.

  Are you sure you have deployed all the rules again Calc Manager planning then the rule is removed from the planning to remove from the Manager of Calc won't be enough.

  Support documents

  How to remove Calc of Hyperion Planning and Smart View rules after their removal in the calculation Manager? (Doc ID 1983285.1)

  How to remove redundant deployed rules of calculation Manager a Hyperion Planning application (Doc ID 1568355.1)

  How to completely remove the business rules created in the calculation Manager (Doc ID 825853.1)

  How to remove business rules that have been deleted or renamed in the calculation of Planning Manager. (Doc ID 1598010.1)

  See you soon

  John

• How to change the business rule in the runtime

  I create a business rule and add it to a BPEL process. After deployment, this process works very well.
  How to change the rule at run time? I want to say that I did not need to redeploy the process.

  In the case of 11 g,.
  You can use SOA composer to change the rules of business in run mode.
  http://host:soa_server_port/soa/composer

  But the composer will be available only in the Group of hotfixes (11.1.1.2.0) 1. It is not available in 11 GR 1 material SOA (11.1.1.1.0)

  If it is 10g, you can use Ruleauthor UI
  http://host/ruleauthor

• Error, see business rule (to assocated with) in the list manage the data in the forms

  Hello
  
  I have a business rule, I see it in the Regional service console, but when I try to join my form data in the Planning, I don't see this business rule in the list fo management rules which appear in manage data forms-> tab business rules. I hae associated with this business with my outline planning application rule again I do not see it. Can someone please.
  
  Also I migrated my rules from one environment to another (PRod dev), now when I go to Manage dataforms in Dev, I don't see these new rules of business listed there. Help, please
  
  Published by: 903576 on February 14, 2012 13:42

  Have you added places for business rules? Do you think you / user access to business rules in the environmental assessments?

• Prevent the business rule to run simultaneously

  Hi all

  We are on Hyperion Planning 11.1.1.3.500. One of our business rules makes the system completely meaningless with its results when some users are running at the same time. A person must have been necessary a HBR not to run when it is already running. I need your suggestions to avoid the business rule to run simultaneously.

  Thank you

  Hello

  • tell users check the console to work first, before you run the rule.

  or

  • have a member of the system in your dimension that you can use as a flag. You set it to 1 as the beginning of the rule to indicate he runs, 0 / #Missing at the end of the rule to indicate is finished. You then add a @RETURN to leave the calculation if this flag is set to 1 in your rule. Just be careful about this because if for any reason the calculation fails, or is killed by an admin then your flag is set to 1, but you can still have a form of admin to reset these flags easily if necessary.

  See you soon

  JM

• Problem with the business rule

  Hello

  I am trying to launch a business rule and the error is with a statement block, and bewlos is the erro

  Formula for [BegBalance] runtime error (line 93): attempt to cross a member function [@X] null

  I have amtrying to run os set States below

  ("BegBalance"
  "Jan" = "Jan"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Jan"-> "Ending members."
  "Feb"="February"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Feb"-> "Ending members."
  "Mar"="March"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Mar"-> "Ending members."
  "Apr"="April"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Apr"-> "Ending members."
  "May '=' may '-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) *"can "->" ending members. "
  "Jun"=' June'-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Jun"-> "Ending members."
  "Jul"="July"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Jul"-> "Ending members."
  "Aug"="August"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Aug"-> "Ending members."
  "MS ' =' Sep'-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * 'Sep'-> 'Ending members."
  "Oct"="October"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Oct"-> "Ending members."
  "Nov"="November"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * "Nov"-> "Ending members."
  "Dec" ="Dec"-> @MEMBER (@CONCATENATE (@Name (@Currmbr (Account)), 'ARPM')) * 'Dec'-> 'Ending members. "
  );

  M HERE just try to multiply here.can someone pls suggest.

  Hello

  This seems to be a mistake because of the name of Member formulated with the concatenation of the current Member of the dimension account with "ARPM.

  Check if the membername formulated in the formula corresponds with the name of the Member present in the outline.

  I hope this helps...

  Kind regards

  Amit Khanna

• Could not find job - "Business rule will now run in the background."

  Hello
  
  
  When I run a certain business rule it takes a long time and then up the message = >
  
  "Business rule execution time exceeded the configured maximum wait times. Business rule will now be running in the background. To check the status of the execution of business rule, open the page of the Console to work. »
  
  I opened the console work - navigate / manage / Console library work - but I can't find anything; even when you look at a hidden jobs - but limited to myself...
  
  Is he referring to another console work, if so someone can tell me where I can see the result of the business running rule?
  
  
  Thank you
  
  Robert.

  His reference to the same console to work. You can check if the rule has made the change expected in the data.
  If you're 11.1.1.2?
  How long this rule usually take to run?

  To work this issue autour, you extend the value of timeout for business rules.

  1. Select Administration, then manage the properties.
  2 Select the Application properties to define the properties and values for a planning application.
  3. Add the property by clicking Add, entering the property in the empty line, you enter a value in the property
  Value for both of these.
  -HBR_MAX_WAIT_FOR_RULE
  -HBR_MONITOR_DELAY
  Values for the two columns must be defined in milliseconds.
  4 restart Planning server services.

  Please refer to the Guide to planning administrator for details on the properties of manage.

  Also, take a look on:
  Executing business rule of the warning by calculation Manager "business time rule runs exceeded maximum wait time configured." (Doc ID 1372449.1)

  See you soon... !!!
  Rahul S.

  Published by: Renu on March 1, 2012 16:07

• Get the smart tag list of business rules

  Hello
  
  Do you know how I can get the label of active lists in business rules?
  
  The label is the name of a dimension member in another dimension, and I want to use this label to fix this other dimension.
  
  Best regards
  Rodrigo

  Hello

  To do this, I use a CDF that reads relational database planning where SmartLists labels are stored. Then I just use @MEMBER (@MyCDF (mycdf parameters)) in TROUBLE.

• Failed to refresh the database after a forced shutdown of the business rule

  Hello Experts!
  
  I am currently test and adjustment of performance of business rules in Hyperion Planning 9.3.1. I started a business rule in the Regional service Console that ran a lot too long so I decided to stop it manually. But after this manual stop when I try to refersh Essbase of Hyperion Planning (Administration > manage the database > database update) I get the following error:
  
  + com.hyperion.planning.olap.EssbaseException: impossible to restructure. There are other active users on the database [%s] (1013101).
  
  I remember having forced company rule stops earlier in other Hyperion Planning 9.3.1 deployments and they did not generate such errors. So could you help me on how to stop Hyperion Planning of this error after manual business rule stops because it's very likely I'll have do them in the future? Thank you very much!

  Are you sure he permanently stopped and everyone is out of the database, you can enter into the EAS, see view sessions.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• develop in the browser business rules

  Hi all.
  
  What is the link for browser based developer of business rules?
  
  Thank you.

  Hello

  Oracle SOA composer can be used to change the business rules in the browser. The link for the composer of the SOA is

  http://: 8001/soa/composer/faces/login.jspx

  Thank you
  KSN Pavan.

• Using the values of the A-T-D in Business Rules

  Hi all
  
  I use Hyperion Planning 11.1.1.1.0.
  I activated series dynamic time A-T-D in the application.
  
  I need calculate the % of variance for a YEAR, the formula to use is:
  
  (A-T-J (Oct) Budget - Y-T-D (Oct) real) / A-T-D Budget (Oct) * 100.
  
  I have a business (created in environmental assessments) rule makes the difference to other calculations % who are quite simple as Budget actual/Budget * 100.
  
  The formuls for normal variance percentage works, but I get an error when you write a formula for:
  
  "% Of variance (YTDActual & YTDBudget).
  ('% Of the variance (YTDActual & YTDBudget) '=' Y-T-D(&CurrentMonth)'-> Budget - "Y-T-D(&CurrentMonth)'-> actual / 'Y-T-D(&CurrentMonth)'-> Budget * 100 ;))
  
  
  The error that appears is the following:
  
  Details: cannot calculate. Error (1200497) analytical server: compilation error formula [% of Variance (YTDActual & YTDBudget)] (line 2): name of the unknown member function [operator @X] ['Y-T-D(&CurrentMonth)"]
  
  
  Can someone please advice such as using Y-T-D values in formulas?
  
  Kind regards.
  
  Mirka

  Here are some tips that can help:

  (1) you cannot directly reference Dynamics-Series extended members in good standing of business or a member formula. This is "virtual" members It is a common misconception.
  (2) even if you can reference these members in a formula, you could not store a value in them anyway, because they are dynamic.
  (3) he does usually not much sense to calculate the differences like these in a business rule. I would recommend making the formulas of dynamic members, re-encoding (not business rules) in the dimension of your scenario. They do not need to be "Two pass" in the strict sense (eg. recalculate a ratio for housing), but they need to shoot well, so set them as two passes. (otherwise you will end up with the order of calculation questions where you get incorrect results and other calculations fire after the variance).

  Looking at your condition, you don't really need a variance that calls members dynamic time series. Simply create a scenario of variance with a formula such as @VARPER ("Budget", "Actual");. If you have "Y-T-D (Oct)", chosen as your period of time in your form or datasheet calculation and 'Bud vs law %' (this is your new scenario of variance) selected, it calculates the variance of the CDA for October, or no matter what time you have selected.

  Just a reminder:

  (1) create a new scenario, called "Bud against law %". Make dynamic and re-encoding. Give him a formula of @VARPER ("Budget", "Actual");
  (2) scrap your business rule. Add other scenarios of variance if necessary.
  (3) add your CDA member and your scenario of variance to a form and test.

  Hope this helps,
  -Jake

• Error of business rule when running the command line

  Hello
  
  I get following error when you try to run the business rule from the cmd prompt.
  
  C:\Hyperion\AnalyticAdministrationServices\console\bin > CmdLnLauncher.bat - Sservername - Uusername - Ppassword - rBRname
  The HBR logging configuration file:...... \HBRClient.properties
  Input method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForE
  says > to 1254147029953
  Input method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForE
  says > 06:10:29
  Output method: com.hyperion.hbr.api.RuleManagerClient: getPromptVariablesForEd
  It > at 06:10:30
  Duration: 125 millis for performance com.hyperion.hbr.api.RuleManagerClient: getPrompt
  VariablesForEdit
  Connect the missing channel or has an invalid format. Please specify a valid connection
  string value (Server/App/DB) for the launch.
  2009-09-28 06:10:30, 203 FATAL main com.hyperion.hbr.cmdlnlauncher.LaunchManager
  -Connect string is missing or has an invalid format. Please specify a valid connection
  value of string (Server/App/DB) t for the launch.
  
  This is the format that is given in the administration of BR. guide Could you please tell me where I'm wrong?
  
  Thank you
  Agnes

  Hello

  Here is an example of the use of the launcher command line > CmdLnLauncher.exe trade rules

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Impossible to find in the JDeveloper business rules when creating new project

  Hi all
  
  I'm in Chapter 9 creating a rule of Non - SOA Java EE Application for JDevloper 11 g. I'm following the instructions given in the chapter.
  However I can't find a category of business rules for the creation of a directory of business rules.
  
  It must probably be activated from a place.
  I tried to look for its meaning with JDev installation but do not have anything.
  
  However, it seems very basic level problem... Please let me know if anyone knows how to solve
  
  Thank you
  Haman.
  
  Published by: user11223806 on August 12, 2009 07:48

  Have you installed the extension of SOA for JDeveloper for help-> updates?

• Cannot connect to the Business Rules

  Hello. I can't see that the rules of the EAS Console company.
  I mean when I click on rules job... the error is "error connecting to business rules. The repository has not been configured, or you are not authorized to use business rules. ».
  
  
  Detailed error:
  «Detail: Error authenticating user in UserServerManager.»
  
  Details: Error authenticating user in UserServerManager.
  
  Details: Error authenticating user in UserServerManager.
  
  Details: Exception occurred. Please check your log file for more details. »
  
  It happens when I outsourced users... .. .before I can see business rules...
  
  Help would be appreceated.
  
  
  
  Thank you and best regards,
  Sri-Oracle

  Hello

  This means that the account that you log in to PARTY is not configured for access of business rule.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Impossible to get in to the company business rules

  Hi all! :) I have connected to the Essbase server, but when I click on the folder of business to the company rules, I get the message: + "error connecting to business rules. The repository has not been configured, or you are not authorized to use business rules '+. I also clicked on "Get details" in the error message box and it says: "error creating object DBConfig +.» Please check if there are exceptions in the log file and if HBR is configured correctly". + I checked my permissions of Shared Services and I don't know that I'm set up to use business rules; In addition, a few days ago, I worked with rules of business without problems and now I have this problem and I can't guess what he risks and how to fix it. I would be very grateful for any advice!

  Hello

  Try restarting services RMI and AAS.

  Kind regards

  Amol