Asus Eee PC - USB recovery

Similar Questions

• I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  Firefox will work on the Asus Eee Pad Transformer tablet, although there are some known issues with the keyboard dock. For more details, see https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues

• Satellite T130 - Toshiba create USB recovery

  Hello.

  This is the situation:

  I have laptop Toshiba T130 with no DVD player. After installing Win7, I shrunk the partition D tool in Win7 and used the free space to install Linux with GRUB. Then I shrunk the partition also C by Win7 tool and free space to create another. This however told me something about the dynamic disk or something...

  But he has somehow broken GRUB so I decided to reinstall Linux. But the scores have been somehow broken, but I installed Linux on the last partition. Since then I could not start Windows or repair because partition D has actually been removed!
  The C with Win7 partition seemed intact.

  Trying to fix the computer and try to start trouble, I got error 0 x 090 or something with partition table error. So therefore, I deliberately decided to create the new partition with Gparted that off my HARD drive. Then I put in place the new partitions: 3 x NTFS, (400 MB recovery, partition Win7 and another) + extended partition containing the NTFS partition + ext4 partition, swap.

  Then I copied the hidden files (that I had saved earlier) in a hidden partition on the HDD laptop + I copied folder of Toshiba 3rd NTFS partition recovery (I had backed up the files immediately after obtaining of the laptop).

  Now, I'm stuck with 0xc000000e error when you try to start. I also followed this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53952&tstart=15

  Can you help me with Win7 Starter? And what program to use to make Win7 64 bit USB bootable recovery CD? I tried unetbootin and USB, but they did not...

  Any advice will be highly appreciated.
  Thank you very much!

  Oh mann what are you do is incredible. ;)
  The entire structure of the HARD disk is now screwed upward. I m just wondering why you did that on this small Satellite T130.
  I mean it's OK all what are you do and you can do what you want with your machine, but my personal opinion is you're wrong for laptop for all of this.

  Satellite T130 is small ultra portable laptop designed to offer the maximum of mobility and offer long battery life, when you are out of office or travel through. So I think that the most important thing for this laptop is well installed and configured the operating system that runs stabile and with the minimum of consumption of energy. This laptop doesn t have the optical disk drive and the overall situation is more complicated if the factory settings are changed.

  You now have on the HARD drive is nothing but the jungle and to me, it seems pretty confusing.
  If you checked s user manuals document you can find the exact explanation, what can be done with the recovery image saved on the second partition and what type of recovery media can be created.

  Recovery image is not designed for use with third-party applications part so it can be problematic to create USB recovery drive.
  Thread you link posted is better thread on this topic and if this will not help I really don't know what you can, except for ordering original Toshiba recovery DVD and make the installation of OS to get the factory settings again.

• Yet when can WT8 - A - I create a USB recovery?

  Hello.

  A newbie here and must I say, I had a heck of a job, find the button 'open a new topic '.
  I only found it by chance which has landed on the right page.
  Anyway, back to my request.

  I always have a brand new Toshiba WT8A still in the box.
  Here another must be told.

  I had possession of this unit about a week ago and to cut a long story short, at the suggestion of a drop-down notification of Toshiba I downloaded and installed a BIOS update, it went well.

  I was then advised to download and install the update of the installer of Intel. It went well until to half way through and then everything froze, the screen went black and stayed like that for over half an hour or two. When it looked like not commissioning again I tried to start it by pressing the power button on the side, but instead of putting on and working, I got a nasty blue screen informing me that Bitlock had locked my tablet... I panicked!

  In my desperation, I have absolutely violated the internet solution to notice that the only solution was to recover the operating system, but the problem was that I didn't have a USB recovery.

  I was lucky that Toshiba was kind enough to take possession of the mortared Tablet and restored the device to its factory for me.

  So you can see a USB recovery is essential, but the question, at what point can I create them as we know that as soon as you begin to configure things, are supported by internet downloads and everything screams it must be updated and you are bombarded.

  To be honest, I'm terrified to BitLock upward again. The irony is that I was not anywhere near BitLock that I know about in its use or its application, but from what I've gleaned, it seems the update Intel had invoked the locking identify what he perceived as a potential problem after that the BIOS updated... or so it has been suggested.

  I'll start another post with questions about the BitLock, for now, it is a question of recovery USB and welcome all responses. Do I get messages when a response has been added because I see not a checkbox to request this service. ?

  Concerning

  Recovery must be created initially in the best cases after the Tablet has been configured.
  The recovery media contains the image of Toshiba, but the recovery media won't back up your current data or setting. It's very important.

  Leash so assume you got you filed using this Toshiba recovery procedure.
  After this recovery process the tablet will be set to factory settings to the same State as the first date of purchase

  Hope I could clarify this issue.

• Satellite L300-13 s - USB recovery instead of recovery DVD discs?

  Hello

  Well, for the first time in 8 years I had to do a system recovery using the disks that I created when I bought my l300-13s using the Toshiba Recovery Disk Creator.
  I had inadvertently deleted the HARD drive recovery partition when I decided to make a clone with a larger HARD drive.

  What I want to know is instead of making recovery discs DVD can only do a USB key recovery?

  Thank you

  Peter.

  When you open Toshiba Recovery Media Creator you can see media options that can be created. I m not 100% sure, but I think that the old L300 there was possibility of recovery DVD only so I think that you cannot create USB recovery.

• HP Pavilion 15-p020ca: create USB recovery media, delete the Lexar USB encryption?

  Hey guys, try to create USB recovery media. Want to know if the Encrypt-a-Stick Lexar software should be removed from USB before that. Or, can be used to password protect the USB recovery media? Don't think it's necessary, but if it can be used I could go that route. Thank you, pcpunk

  Hello

  Please remove, make one a blank USB key.

  Kind regards.

• Unable to boot from USB recovery media

  I created my usb successfully recovery media using a pendrive of 32 GB. Of course, I don't want to test it. I started my ultrabook, and however, it would not begin the recovery USB. Clues? I pressed ESC several times and came in the start menu.

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  You are the very welcome.

  A way of knowing whether worked or not, usb recovery flash drive support and is to make an another bootable usb flash drive to test whether or not it is the laptop.

  The fact that you could not start the flash from another PC drive leads me to believe that the creation of recovery has failed.

  Here is the link to the instructions and tools you need to make a bootable flash drive general.

  The two files that you need are at the bottom of the page.  The bootme.zip file is just the BACK files that you extract, copy and paste once the other file actually formats the flash drive to make it bootable.  In this way, it is a speedy BACK and from there you can just go out.

  I use this tool to update the firmware on HP Business Desktop PC processor.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• HP 15 F018dx: Using a HP USB recovery on other models

  If I order a recovery usb Windows 8.1 HP for a specific model laptop... is it possible to also use this USB recovery for an additional HP laptop computer that is the same model or a model different recent HP that originally came with Windows 8.1? Thank you.

  Hello:

  If you order a usb for Windows 8.1 HP for laptop model specific recovery, it will work on another of the same model.

  It will not work on any other HP PC.

  The recovery media checks the BIOS and other unique identifiers, and if they do not gather, and then exit the Setup.

  He'll even specific enough... as to my own situation... I replaced the Broadcom wireless card in my G1 of 350 HP with an Intel card (which is not available on the 350 G1), and the recovery process is gone until the end, then he erroneous reports that there is no driver found for the wireless card, recovery failed.

  I assumed he would recover the laptop, and I could just install the Intel wireless driver.  No dice.

• Asus eee Pad Transformer Tablet

  I've seen this mentioned in the thread of SD card, but refuses to a post here. I hope that the thread will die a painful death it deserves.

  In any case, I got the link for the Asus tablet which sports Android 3 and it is supposed to support the SD card, Ta Dah! Anyway if you are interested, here's the "official" release all the * itchers may return their xooms and never darken our door again.

  http://promos.ASUS.com/us/PR_2011/transformer/index.html

  Looks like it's pretty much like the Xoom except a little heavier to 1.5 pounds (if I remember correctly the xoom is 1.3). Apparently, it will be available in 3g and WiFi, but other that the weight appears on the same specification wise. I'm sorry except for support of the SD card.

  This announcement bottom line was my humble opinion is that support SD card should be almost like Asus is advertising it and the http://www.wired.com/gadgetlab/2011/03/asus-eee-pad-transformer-tablet-has-16-hour-battery/news article # says that it is now available in Taiwan. So I hope that we will be getting a notice of motorcycle to return our tablets (after they leverage from my cold dead hands) for upgrade.

  TFG

  
  

• Get an error asus eee pc acpi service has encountered a problem and needs to close

  I get an error on startup: get an error asus eee pc acpi service has encountered a problem and needs to close

  What can I do to fix this?
  GR Erik Frederiks
  (Asus EEE PC 1005HA)

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Start the computer in safe mode with network and check the issue

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not occur in safe mode with network, follow the next step to isolate the problem.

  Step 2:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Reinstall ACPI drivers from the site of the factory

  Click on the link http://www.asus.com/Eee/Eee_PC/Eee_PC_1005HA_Seashell/#download and try to reinstall the drivers.

  It could be useful!

• USB recovery

  Hi, I created a USB recovery using Acer Recovery Management. I will be able to restore to factory so I copy the content of the USB key on an external hard drive and use the external drive as the recovery disk? I use Windows 8.1 on an Acer Aspire E1-410. Thank you

  From what I've seen, this will not work. Microsoft's guidelines and requirements that must be followed in the creation of the backup. It requires the player to be erased and then loaded with the bootable Installer to work. Is there a way round it? Probably, but it's just because everything is possible with a computer and the appropriate knowledge.

  So, if you have copied the content on a hard disk, this HARD drive will not start unless it is properly formatted with the installer of MS. copy/paste it back on the flash player will not work unless the flash player has not been changed (and even then, I'm not sure this will work either.

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.

• WRT300N and Asus Eee PC 1002 H does not play nice-Wifi N

  I have an Asus Eee 1000 H and 1002HA Eee. Both are running XP. I have a linksys WRT300N. All are supposed to support Wireless N. I got the 1000H running to 135 Mbit/s, but my most recent 1002HA runs at 54 Mbps, even right next to linksys. These are the settings of the WRT300N.

  Network mode: mixed - if I select wireless only, it does not see the SSID but will not connect do not.

  Radio band: wide angle: 40 MHz channel

  Standard channel: 1-2, 412 GHz SSID Broadcast: enabled.

  I use WPA with TKIP. Key renewal: 3600 seconds

  Beacon interval: (default: 100 milliseconds, range: 1-65535) DTIM interval: (default: 1, range: 1-255) threshold of Fragmentation: (default: 2346, range: 256-2346) RTS threshold:

  The driver installed is the version of the driver 7.6.1.149.  This is the 1002H Wifi driver

  Well, I tried WEP and WPA, and both do not work.  But I went to WPA2 and that worked...  I give up.

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• update of ny asus eee pc 1005hab for free all drivers and windows 10 udate free?

  I neeed to find all the free options to bring my asus eee pc 1005hab updated

  The free update period is over.  You will need to buy it.