ASUS ME400CL battery quickly in mode drains standby connected

Similar Questions

• iPhone 6 stops with remaining capacity, battery quickly drains

  I have an iPhone 6 running iOS 9.2.1 (he was running 9.2 and upgraded again to see if he'll fix it - I am registered for iOS beta test). I can load it at 100%, but the battery quickly led, often going from 100% to 80% more than 20 minutes of use with the brightness set to 50%. The remaining battery life fall randomly 65% to 40% (for example) or will simply die. He will often fall to 1% and after plugging back, immediately shows that there is 60% (or any random number) left. I made a backup, wipe the device and restored with the same results. Is it year iOS issue, corruption of the app, battery twisted?

  Any suggestions are appreciated.

  On the despair (impossible to find all the answers in this forum and others) and not wanting to drop hundreds on a new phone or have my battery replaced only to find out later that my iOS or some app is corrupting my iPhone, I saved my photos and did a hard reset on my device. I installed a few applications, one of those who are Netflix, so I could test the longevity of the battery without having to interact actively with it.

  The verdict? I watched 2 hours of Netflix on wi - fi with the brightness to 75%, sometimes checked my phone (while ensuring close any app I used), and I was able to get a good 6 and a half (almost 7) hours out of it. This is a HUGE improvement over what I was experiencing, but I can tell the last 30% of my battery drained rather quickly and show bizarre behavior, from 31% to 29% and then after a few minutes of use to 2%, which continued with the flashlight on and shopping on Amazon for a good 10 minutes until it dies completely. Once I plugged it in, he came to 8% immediately and is now sitting on the charger for the price of one night.

  Don't know if this helps or confuses the * out of anybody... but I'll take the improvement so far. I hope that maybe he can get this information to the right person and maybe they can offer additional advice. It's certainly a pain the * to wipe a phone from scratch... but it was that or get a new phone. I hope that someone out there has a solution or has more information to add. Ask me any questions you need. I'll try my best to answer. BTW... This was not mentioned in the post above, but I test several Chargers and cables (not that I think this is important because the battery drain is erratic and not the perception of speed).

• My Satellite goes into battery mode despite being connected to the power adapter

  Y at - there anyone out there who can help me, please!

  I bought a Satellite a couple of years ago which worked well for a while - however, it has started to overheat a lot and kept stop without reason. After many searches on the net, I discovered that the fans were very likely blocked with dust? After you clean the laptop worked like a dream and as a Bunny happy I was!

  However, now a new problem has been its ugly reappearance - for some weird reason the laptop suddenly, without warning, past in dominant mode of battery despite being connected to the power adapter? He refuses to "acknowledge" that the adapter is plugged drains the battery quickly and then stops?

  I tried once more looking for an answer and it seems that I am not alone in suffering from this problem? I read that it is perhaps a bad connection between the adapter and the motherboard, but it would be expensive to fix? Others have said to try a new adapter, but I tried from another laptop and it still happens? I hesitate to implement local repair because sometimes, this problem may occur after half an hour and other times, that won't happen for hours and hours and it is difficult to explain the problem?

  There seems to be no rhyme or reason, but to crazy me on a regular basis!

  HI Deb,

  It is a common problem and can have several causes. The most common are a common defective soldering on the motherboard (where the socket is attached) and it can also be caused by a bad connection between the AC plug (at the end of the cable) and the socket on the laptop.

  Unfortunately, the standard response from most repairers is just to replace the motherboard, probably because it's faster for them and produced more revenue that comes to fix the connection.

  I solved this problem on my SA30 by pinching the cable ca to the back of my laptop in order to prevent any movement or tension on the connector. Unfortunately this will not help if the socket is already damaged, but it can reduce the incidence of the problem to occur.

  Kind regards

• My laptop fan constantly runs high that empties my battery quickly

  I bought my laptop 1 year ago and it was working fine
  but then, after a period of time that the fan started running constantly even on saving energy, or when there is no process running...
  It is draining my battery quickly (to 1.30 hrs)...
  can u please help on this issue

  Hello Raga,

  If you followed the expected document above, as well as this resource on the Reduction of heat inside the PC to avoid overheating without success, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl
  
  I hope this helps!
  
  Concerning

• You can use the range of colors in quick mask mode?

  I like to use the color range and the use of masks is quick to make a selection, but when I enter the Quick Mask Mode, I can use is no longer color range. I want to be able to do is:

  1. Enter the quick mask
  2. Range of colors allows you to make a selection
  3. Specific areas of this selection, I want to use as a paint mask
  4. Quick mask out of having my spiffy painted areas as the selection

  If all thinking is possible? I'm in CS6, and I've been looking to make this option available for years.

  No, range of colors will not work. It should be greyed out, otherwise you'll be sampling your mask and your image.

• The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when selecting th

  The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.

  The problem does not appear, if PH 13 items is run in administrator mode.

  The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.

  Please, advice how to fix this problem? Perhaps, there is patch or update available?

  I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.

  Scratch disk settings can be found under preferences / Performance.

• doubt on the Quick Mask mode?

  Hi I have 3 layers in photoshop.

  1. Background
  2. LAYER1
  3. Layer2

  Now on layer 2 I made a selection and entered in quick mask mode and then applied gussian blur. When this is done the selection borders trying to blend with the background, or will they try to blend with the layer 1 as is the layer just behind the layer 2. In case if there is no background, I mean if all three are diapers, then what happens?

  I have read the tute again and clarified. It will blend with the layer 1 image not directly with the background that is at the bottom of all the layers. In any case thanks a lot.

• Mask of composite and grayscale to switch to Quick Mask mode: problem

  Hello.
  I have a problem with this command: "toggle the mask composite and grayscale in quick mask mode"

  I know that I have to press the tidle "~" to activate it, but I use a keyboard Azerty (Belgium) and I struggle with it.

  The only way I can use the key on my keyboard tidle is to press "Option + n" keys.

  So in Photoshop, I load a channel selection, turn into 'Quick Mask mode' and press "Option-n", but nothing happens.

  If I try with 'Command + Option + n', I open the window for a new document.

  I tried all combinations of keys, but nothing has worked.

  I also tried to change the key for Britain, United States, etc., but it still does not work.

  I use the English version of Photoshop CS6 (subscription) and a keyboard Azerty (Belgium) on a Mac Osx Snow leopard.

  How can I solve this problem?

  
  

  In QM view, click on the eye on the left of the RGB channel thumbnail to do the same thing just by pressing the tilde key.

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• Laptop battery does not work except if connected to the charger

  Original title: laptop battery

  recently, I replaced my laptop battery, why it wont work without having the charger NVI

  The battery may be defective.  The connections inside the laptop is the battery may be defective.  The charger is maybe defective.  None of them can easily be diagnosed with tools home and would require a reputable repair shop and/or certified to check.

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Battery drains Lenovo x 230 quickly in mode "ensure"; Power management centre does not work

  I have my laptop lenovo x 230 put to sleep when I close the lid. When I close the lid of the icon of 'sleep' on the back of the screen lights up. But the dough will not last all night on mode 'sleep'. In about five hours, the battery is completely flat, and I have to plug it in and start the system. I've never seen this run poor dough in mode 'sleep' on any laptop I've ever owned.

  Another thread in this forum blame the USB port can charge mobile phones, etc. at low specific power and recommend to disable the "always on" option fo this USB port in the Bios settings. I then either it seems to have contributed. At least my laptop still not succeed overnight in mode 'sleep'.

  At this point, it seems my ownly option is to use the "sleep mode" only when the laptop is plugged in and the focus mode standby extended when the power of dough, which is disappointing. I've never had to worry about this in the past with other laptops.

  Maybe / probably related is the fact that the lenovo ThinkVantage Power Manager (v. 7.16) hangs at the splash screen when I try to open it, so I tried to manage the power through the Windows Control Panel power settings.

  Use powercfg in the cmd window (run it with administrator rights) to verify the effectiveness of power.
  powercfg-energy
  powercfg - devicequery wake_armed

• Watch the OS 3 drain battery quickly

  Since the update shows OS 3 last night, the life of my watch battery drains ridiculously fast. Every 20 minutes, I witnessed a battery drain for at least 4-5% without use. It's even worse when I use the app to training. I turned off refresh in the background app and the problem still remains. I also tried to restart the phone & shows as well as some non-matched and restored from backup. Still nothing.

  < published by host >

  Hello

  Battery life varies depending on use and other factors.

  During tests, for example, Apple has reached 18 hours of battery life with the next use: 90 time checks, 90 notifications, 45 minutes of usage of the app and a workout of 30 minutes with Apple Watch Bluetooth music playback.

  As you have already tried disconnecting and rematching that progress of your watch, the following can help:

  • Close all open applications on your iPhone to them and then restart your iPhone and your watch:
    • I understand that you already restarted them, but this time also close all applications first:
      • On your iPhone: double-click the Home button, and then drag upward on each Preview app to close;
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support
  • Find and install the updates that are available for third-party applications on your iPhone and watch.
  • Check that you do not have a workout running or suspended in the integrated training application.
  • If you already have (not necessarily only recently) already used any third party fitness, followed applications such as Strava to Records workouts on your watch, check on your watch to see if there is currently activity paused in the any of these applications. If there is, put an end to this activity of this application on your watch (not on your iPhone).
    • If in doubt, it can help to remove this any application of third party fitness of your watch.
  • Under earlier versions of the software, some users have reported problems with battery life in the framework using profiles and/or Exchange calendars. If you use an Exchange calendar, can help to one or more of the following:
    • Check your Exchange calendar for all items before today.
    • Delete / delete all old messages related to the prompt calendar Inbox (accept and refuse notifications).
    • Create a rule in your email account Outlook moves future all accept and reject responses as they are received, in a separate e-mail folder that will not sync with your iPhone and Apple Watch.
    • Consult your Exchange calendar to find errors.
  • Finally, it can help to remove all third-party applications on your watch and then monitor the performance of the battery after you have added back, one at a time. It is the same regarding complications of watch face.

  After trying the above steps, if your watch continues discover much shorter battery life than suggest examples of Apple you should expect, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to have your watch checked, if recommended by Apple (warranty, if it qualifies):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  More information:

  http://www.Apple.com/watch/battery.html

• It seems that my iPod touch 5th generation drains my battery quickly

  I don't use my iPod touch frequently during the day. I do use internet for and a few games, no video, just Board Games. I still frequently find the pod touch low device running every two days. I'm surprised. My iPad mini retains power for a longer period of time, and I use it more frequently. Bigger battery? I do not know. I have been updating my iPod touch over the years to the last generation, and this is the worst experience I had to drain the battery. What is the latest generation of IOS? I do not know. Any comments would be useful. Thank you.

  My 4th, 5th and 6th gen touch all had battery short life. As it is even now I charge mine every night.

  I think it's more a battery which is part of the question.

  I invested in one of these portable Chargers, so that might be an option, in that you can watch. I also have a charger at work I use in the middle of the day.

• 9.3.2 IOS on iPhone 4S battery quickly draining

  Hello

  I've just updated to iOS later and it seems to drain the battery pretty easily. It's roughly ~6%/hr just sitting there, no use, no apps open, etc.. Before the update, it was like 1%/hr, not even that I think.

  Before hitting submit and asking what gives, I just searched online and found this: http://www.vinereport.com/article/ios-9-3-2-updates-apple-admits-problems-promis're-to-fix-them/11039.htm

  .. who mentions iPad 9.7 pro and everything else is fine, so with a little luck, someone sees this, too =)

  Have you ever tried to force restart the phone after the update, with the button sleep and hoe for about 10 seconds, until what the Apple logo come back again?

  You lose no data by doing this.

  Next step after that could be put back to the factory settings and restore form the last backup, especially if you updated using the option 'Over the Air '.

  Use iTunes to restore your device to factory settings - Support Apple iOS