Asynchronous loading of 'active' schema is not supported

Similar Questions

• XP Professional when I try to load it "Fix" say does not support my operating system.

  If I rename then when it loads say error: %1 is not a valid w32 application... have had other problems with the CPU, run scans with malware bytes, House call, avenger, unloaded norton, I tried pc tools, now only using prevx, all analyses indicate clean... for now I'd like to check or adjust the operating system can, t download from microsoft.

  If I rename then when it loads say error: %1 is not a valid w32 application... have had other problems with the CPU, run scans with malware bytes, House call, avenger, unloaded norton, I tried pc tools, now only using prevx, all analyses indicate clean... for now I'd like to check or adjust the operating system can, t download from microsoft.

  When he receives no win32 application invalid: click Start > run > paste the following regsvr32 /i SHELL32. DLL > press ENTER. Now try the Fixit. In addition, it would be useful to know what Fixit you try to run.

• I connected my hp desktop for samsung tv, but when I try to start windows it shows loading then windows past mode not supported unless I have load in safe mode. How can I fix it?

  How to load windows normally?

  See the following topics:

  Connect your computer to a TV - Windows help

  also:

  How can I connect my Windows PC to a TV? - Topic

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Custom mouse pointer scheme does not load at startup

  I am running windows vista Home premium and I downloaded a mouse on the internet system. I saved the regime as "smooth" and clicked on apply and it worked. But when I restarted my computer, the system of mouse returns to the plan original windows vista aero. I've tried to stop all non-microsoft msconfig services and disabled all services start and enabled in the well, but yet the scheme has not been loaded.

  balingsta,
  Thank you for visiting the Microsoft Answers community forum.

  If your mouse is a Logitech brand, it deals with the issue.    If this is not the case, let us know what you have the mouse and we will try to help you solve this problem.

  This should solve your problem:

  1. click on start, type "msconfig" in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to each of them.
  4. click OK and restart your computer.
  5. after the restart, change your mouse pointer, the way you want and restart again.  Your mouse settings remain the same.

  Let us know if this information was useful or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

• The sim card that you are currently installed in this iPhone is a carrier that is not supported under the activation policy that is currently affected by activation serv

  The sim card that you are currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server...

  Can anyone helpe me...? My phone is locked to O2, but since June 2013 is factory unlocked. Contact O2 for more information, and the answer was: "is everything okay". My phone is now unused, but the sstrange thing is that I can receive phone calls

• ATI Catalyst Control Center simplified view do not support active graphic processor

  When I start the CCC, I get "features in the ATI Catalyst Control Center basic view do not support active graphic processor".

  I'm using ATI (not Intel).

  Driver is showing only: Version 8.633.0.0
  ATI Mobility FireGL V5700

  pci\ven_1002 & dev_9591 & subsys_212717aa

  System BIOS: 3.11 (2009-11-19)

  W500 4058-CTO on WinXP

  Uninstall-reinstall CCC and or the driver does not help. How can I fix CCC?

  Thank you

  Rick

  Now corrected to my laptop an error of ATI Catalyst Control Center.

  I had given up the uninstall/reinstall and register pluck and sweep, so I ran Intel graphics all the time.

  I voted against reinstall .NET 3.5, 3.0, 2.0... as I didn't aggravate and lose even more time, since I have a working machine.

  The other day the matrix Driver Lenovo had a video update.

  V8.712 - 100302 b - 097094C

  Applying this version fixes my ATI Catalyst Control Center.

  If this will help someone in the future, here's my ATI Catalyst install Manager report Journal of Installation:

  Hardware information
  Name ATI Radeon Graphics Processor
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 9591
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0 x 2127
  Subsystem vendor ID 0x17aa

  Existing packages

  Packages for installation
  Catalyst Control Center
  Final status: success
  Version of the article: 2010.0302.2233.40412
  Size: 150 MB

  ATI Catalyst Install Manager
  Final status: success
  Version of the article: 3.0.765.0
  Size: 20 MB

  ATI Display Driver
  Final status: success
  Version of the article: 8.712.0.0000
  Size: 40 MB

  Microsoft .NET Framework Version 2.0
  Final status: success
  Version of the item: 2.0.50727.42
  Size: 22 MB

  Microsoft Visual C++ 2008 SP1 Redistributable
  Final status: success
  Version of article: 9.0.30729.4148
  Size: 6 MB

  Now, that brings me to the initial problem of refresh of the external monitor around rate not exceeding is not 60 Hz. (subject for another thread)...

  http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W500-external-monitor-refresh-rate-above-60Hz/...

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• 3.5 AIR cannot load SWF graphics and app: folder "Application areas don't are not supported.

  "Error #3747: several areas of application are not supported on this operating system." appears and breaks my app when I'm trying to do something as simple as load a URL to use a graph to the File.applicationDirectory on iOS on AIR 3.5. I'm just trying to load graphics files included in my application.

  I don't know why it happens on "Several application areas." I'm not trying to do the fancy stuff, and exactly the same thing worked on AIR 3.4 and below.

  What is this error and how to fix it? No information appears on this topic in search engine result.

  Read notes of version 3.5 of AIR, there is how you should set the loaderContext in order to make it work.