At all times by clicking on the browser and the

Similar Questions

• Firefox has just begun opeing ads every time I click on the link - use of high disk also reported by Norton

  This morning, I started having a problem with Firefox. I was browsing www.nbcnews.com and when I clicked on a link, a new tab opens with an ad in it. Now, this happens whenever I click on a link. The new tab opens first and normally, he's trying to tell me that there is something or another that must be updated, such as Flash. In addition, Norton reported the use of the disc by Firefox. After that happened, I immediately stopped and am now using Windows Explorer. I don't know what happened, but I'm not happy. I prefer Firefox, but if I can't find out how to get rid of all that was installed without my knowledge, I do not use Firefox more. Have you seen this? Do you know how I can fix this problem? I have watched my modules and I saw that I do not recognize and I removed it. The problem persists. I can try to uninstall and reinstall Firefox, but the parameters normally do not disappear. Is it possible that I can completely uninstall and start again? Hope you can help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• on the opening and every time I click on the Home icon, a second tab opens titled "Customizing firefoxx with modules."

  I tried to uninstall and reinstall Firefox, but the annoying tab still opens whenever I click on the Home icon. To make it worse I get a new tab each time which means I can have several customization tabs opening during a single session. How can I stop this happening?

  In Options/general, you must have more than one home page selected.
  More info on Options here. Startup, homepage, tabs and download settings

• Wuauclt.exe pigs all time processor which makes the computer unusable

  The machine is a laptop Dell Vostro 1000 with Win XP SP3 Home edition. It has 2 GB of RAM with a 120 GB hard drive that is half full. The computer initially had no protection against the virus, then McAfee and Norton now. The problem exists all along.

  For the past two years after start-up, the hard disk will work continuously for 30-40 minutes. Meanwhile, the computer is unresponsive and almost unusable. Meanwhile, the wuauclt.exe program uses 10 to 20% of the time processor, 100% of the time of HDD and 200 to 300 MB of memory. I did a lot of research on this issue. It is clear that this is caused by the logic messed up in one of the programs of updates windows several years ago. I looked at several positions of MVP and/or Microsoft employees, but none of them is no fix for the problem. They say all to come or try this. I tried all the tips I can find. None of them work with the exception of just disable the updates of Windows.

  I contacted Microsoft by phone about it. They suggested that I do a repair of the original disc for Win XP. This does not work because the Win XP disk is earlier than SP3. He won't do anything.

  All I have to do is find a way to remove all Windows Update of the computer software, so it can relocate. I found links to FixIt program on the Microsoft Web site, which is supposed to do, but when I run it, it stops and says something in the sense of "this software will not work with the operating system on your computer".

  It's really discouraging that Microsoft caused this problem and then did nothing to remedy.

  Have you ever done a repair facility or even a clean installation of Windows XP?

• Several times, I click 'share my location' and he doesn't remember my setting for the Web site - how can I do remember?

  Question says it all. The site info geo, Mozilla application opens a box to ask for permission, I click Yes. And then, without even leaving the page, the site requests geo info once again, Mozilla appears a box again.

  This behavior is impossible to use geo.

  You can manage the permissions for the domain currently selected tab here and set an exception allow to share location.

  • Tools > Page Info > permissions

  You can access the Page Info via the menu on a web page and via the Tools menu (press F10 if the menu bar is hidden).

  You can control and manage permissions for all areas on the Subject: authorizations page via the address bar.

• touchevent is getrated every time I click on the screen of the blackberry java

  Hello friends,

  I am from the substitution of toucheven like this:

  Ematics bitmap = Bitmap.getBitmapResource ("onlbswth. PNG');

  Break of bitmap = Bitmap.getBitmapResource ("offldswtch. PNG');

  BitmapField switchOffField = BitmapField (switchOff) new

  {

  protected boolean touchEvent (TouchEvent message)

  {/ / TODO self-generated method stub}

  If (TouchEvent.GESTURE == message.getEvent ())

  {if(flag==0)

  {flag = 1;

  switchOffField.setBitmap (switchOn);

  } else

  {

  flag = 0;

  switchOffField.setBitmap (switchOff);

  }

  }

  Returns true;

  }

  };

  Once I click on bitmapfield, the event is genrated... next time whenever I click on screen event is again genrated...

  is there anything to add to this

  Here's some code I've used processes click on events.  It will be useful.

  protected boolean touchEvent (TouchEvent message) {}
  int x = message.getX (1);
  int y = message.getY (1);
  If (x < 0="" ||="" y=""> < 0="" ||="" x=""> getExtent () .width: y > getExtent () .height) {}
  Outside the scope
  Returns false;
  }
  Switch (message.getEvent ()) {}
  case TouchEvent.CLICK:
  button click (0);
  Returns true;
  }
  Return super.touchEvent (message);
  }

• my windows Installer keeps on pop - lying upwards each time I click on the microsoft office 2007 home and student... and do pop - ing for others... is what is happening? any solution?

  Windows® Installer. V 4.5.6002.18005
  msiexec/option [optional parameter]
  Installation options
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]
  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.
  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  Hi Ruben Ganesh.

  1. When do you have the problem started?

  2. did you of recent changes on the system?

  You can read the following article and try Method 2, 3 and 4A proposed to solve the problems of Windows install.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  Hope this information is useful.

• In my "Plugin Check &amp; Update" Shockwave Director is not up-to-date, and every time I go on the site. Nothing happens, it just says: "Installation Complete.

  -Hello! This issue has been a problem for months and has been bothering me for a long time and I don't even no what the problem with my browser, or my computer if this is the case. I tried several times by clicking on the "Plugin update" I go to the website of Shockwave and he told me that the installation is complete, but the confusing part is that I have the ability to download anything. He just said "complete Installation."

  Help, please!

  And, if possible, please tell me how to uninstall the Shockwave Director, because I do not think that I still need.

  I'll try and offer the pictures of what I see, I hope it helps.

  That's what he tells me.
  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem.PNG Line

  [IMG] http://i1251.Photobucket.com/albums/hh553/KervinsPictures/FireFoxProblem2.PNG Line

  Hello

  You should not install Shockwave Player unless you know for a fact that you need.

  1. In the next page, save the uninstaller program, the full installer for Netscape and the full installer for Internet Explorer if you wish also in this browser.
     • http://www.Adobe.com/shockwave/download/alternates/#SP
  2. Close all applications.
  3. Launch the uninstaller.
  4. Restart your computer.
  5. Run the installer for Netscape.
  6. Run the Setup program for Internet Explorer, if you downloaded it.

  This forum supports BBCode as the [IMG] tags. You can simply post the Plains links to images. In the replies to the thread, you have the ability to attach pictures to your message.

  • https://support.Mozilla.org/KB/markup-chart

• New Notebook Laser Mouse 7000 - click on the button does not work so it is unusable

  If this is the wrong forum, please let me know. I couldn't find an obvious forum for mice. My old wireless mouse does so after much research, I chose a Laser Mouse 7000 and ordered online. I have download the drivers, follow the instructions for setting up and pressing the buttons, the installer with ALL THE BUTTONS by DEFAULT, reset and CLICK does not work. It acts like I am struck by right click. I tried moving, rearranging button settings, nothing works. When I go into control panel it says it is not working properly, but this certainly isn't. I also restarted x 2 to try to make the problem go away.

  It is a defective material, so should I just sent to the seller? That I've already lost too much time on this stupid thing. If I didn't always have a wireless mouse, I would not be able to use my PC

  Windows vista 64-bit standard

  Oh, I try the product. I have to enter the product number. It is very very small and very difficult to read, but I can enter the product correctly, I think. But here is the message that I will be back:

  "The product ID does not match the selected product.
  The product ID you entered is for Microsoft Wireless Notebook Laser Mouse 7000 (all languages), which is different from Microsoft Wireless Laser Mouse 7000 (all languages) you selected for support. Please enter the ID number of the product for Microsoft Wireless Laser Mouse 7000 (all languages) or click Select the product to select the right product. »

  WTF?

  Hello

  Microsoft Hardware Support access in the United States is 1-800-936-5700

  Dial the number and when he asks PID just say you don't know. You will need to give to the
  Tech answers so have a magnifying glass very convenient. There could be a more easy to read number on
  the receiver.

  Believe it or not, I had exactly the same experience with my entire keyboard and mouse, and I am
  in the meantime the new series arrived. Rob - bicycle - Mark Twain said it is good.

• How to reset audio after you click on the other buttons

  I have a slide with audio intro on the slide itself, and several buttons that, when you click on play other audio files. Everything works as it should, and clicking on a button again stops all other audio (such as configured in advanced action).

  My question is related to the audio reset when the user clicks on the button a second time. When I click a button, then click other, and then click new one, I would like to the audio back from the beginning. Currently the audio resumes just where she was off for the first time I clicked on the button.

  Any ideas on what to do?

  Ok.  It's weird.

  Well another thing you can try is to attach the audio clips on the timeline of the slide, objects that are hidden and just use the button actions that you want to DISPLAY these objects at the same time HIDE all other similar objects.  This means that when the object is shown it will play audio sound attached, but stop when hidden.

  See if that approach gets works as expected in cloud of SCORM.

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• Why my cursor does not change when I click on the selection tool?

  When I open any file, the object - in this case, an image - is already selected.

  
  

  I want to enlarge the image, so I click the buttons to do that. Normally, I would choose 125% or 150%, but menu drop-down does not open. I tried clicking on the arrow up/down of the arrow buttons. Nothing happened. I tried a double-tap on the numbers to enter a percentage; small blue horizontal bars appear on either side of the default value '100' as if the machine tries to highlight the number, but can't.

  
  

  I click on the text tool, get the I-beam and can click in a text box.
  

  
  

  After all this, I click on the selection tool. Nothing happens. My cursor is an i-beam. I can't change it to something else.

  
  

  I have installed and uninstalled InDesign several times to correct this and related problems.

  1. Installed since the problem of media - original - met - uninstalled and reinstalled disks - unresolved problem.
  2. Installation files downloaded from Adobe. Same result.
  3. Uninstalled and reinstalled InDesign only. Still no go.
  4. Updates computer back to factory settings, created Office for CS4 installation, point installed CS4 from there. Still no go.

  
  

  Is it possible that there is some sort of incompatibility between CS4 and my computer? It's a new laptop Acer Travelmate (a week). Obtained from TigerDirect, a trustworthy trader.

  
  

  My OS is Windows 7, but this should not be a problem; CS4 works fine with Windows 7 on another computer in my house (which, unfortunately, is busy most of the time, or I would use only).

  
  

  Any ideas at all?

  
  

  Help, please. I have a deadline for the upcoming project and really need this computer to work.

  
  

  Thank you thank you thank you.
  

  Set your font size in the o/s to 100% or to disable the aero theme.

• By clicking on the icon of debugging for a procedure or function survey error ORA-00904

  Hi all

  By clicking on the icon of debugging for a procedure or function throws the error ORA-00904.

  Developer SQL 4.1.0.19.07

  Java 1.8.0_40

  OS: Linux Mint 17.1

  Developer SQL 4.1.0.18.37 on the same machine works very well.

  Clues?

  Thank you!

  

  It is indeed regressed as RDBMS to 10g have object_id all_procedures notice. Buggy.

• By clicking on the mouse no longer works

  With the help of first Pro CC 2015. Windows 10. 32 GB memory, wired mouse.

  I will be working along and first stops to record mouse clicks. Scrolling of the mouse still works and makes the keyboard. But all this mouse click in the window of creation do not register. This also applies to the min and max buttons. If I use Alt - Tab to switch to another program, the mouse works as expected.

  It seems to start when I try to click and drag a clip.

  I tried to create a new project and import the work in. Which failed.

  I started a new project - they also have the same question

  I have seen others with the same issue, but none of the solutions are displayed. As threads stopped, I guess that a solution has been found.

  For those who seek a solution.

  Preference were corrupt. The solution is to update the preferences by renaming the file "adobe".

• Click on the boxes / links / Email / website

  Hello

  I was wondering if anyone can help.

  I have a document which is 300 slides long.  It contains, I would like users to be able to click on the email/web addresses and so that they open in a new winndow

  I think that I did by inserting click boxes, the only problem is it then move on to the next slide in the presentation and I need to stay on the same blade until the user presses the next arrow.

  Any ideas would be great,

  Thank you

  Mel

  Hello

  How you have configured two areas of click (this is the reason why I suggested a box click by the widget)? They pause at the moment, perhaps you could post a screenshot? You must ensure that the second (to go to the next page) click box stops somewhat later than the first, which sends the e-mail. If they both break them at the same time, by clicking on the first and then click box gets the read head stopping also for the second time, click area. I hope this makes sense? The simplest solution is to move the second click a little box to the right on the timeline, showing a split second later.

  Lilybiri