Office Jet 6600: How to print black with color ink run out?

Similar Questions

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• HP Office Jet 6600 - how to feed and scan several pages?

  I have a HP Office Jet 6600, can someone give me advice on how to make the feeder work to scan several pages. Any help will be appreciated

  From Internet Explorer

  Original title: printer scanner

  Hello

  You'll get better help with this product on HP.com.

  Download the User Guide http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer-series---H711/4322968/model/4323587

  Looking for an educational video (same page)

  Ask your question in the HP community

  http://h30434.www3.HP.com/T5/printers/CT-p/inkjet

  Don

• HP office jet j6450: must have a black and color cartridge into the printer to print?

  must have a black and color cartridge in the printer to print?  keep paper bike whatever that either were not sent to the printer. only black cartridge in the printer

  Hello

  This is true for many printers, to protect damages (such as print heads, hooves...) they need all inks to work.

  Kind regards.

• Office Jet 6600 does not print web pages, word documents fine impressions

  Hello.  My Officejet 6600 will not suddenly print web pages.  It prints very well word documents. I have restarted my computer, restarted my printer and not better.  My wireless works very well - as I said, very well printed word documents.  Help!

  Kim

  Hello Kim, alias @Sydlor , welcome in the community of HP!

  I'm here to help you with your printing issue!

  As you cannot print Web pages, I think that the web browser or Web pages could be the root cause of the problem, however, I could certainly be wrong too. I think this way because normally when there is a conflict of printer driver, you would not be able to print from anywhere at all from your PC.

  I suggest that you try using another web browser and try your impression from here to test this theory.

  If you want to let me know the operating system you are running and what web browsers that you tried, I'll help more if necessary. Please let me know!

  

• Office jet 6600 stop the printer during printing

  Two questions:

  1. How can I stop the printer when it is in the middle of a printing project.

  2. when there is more than one page in a project, why would it prints the last pages first?

  Hi jrjs ,

  When a print job occurs, there should be a red X that appears on the printer screen.  This cancels the print job.

  Please hold me.

• Office jet 6600 printer

  our printer hp office jet 6600 model does not print the date or time on the confimation fax sheet after sending a fax.  the date and shows all zeros.  How to set the date and time so it prints the current time?

  Hello

  Thank you for using the HP forum.

  Follow these steps:

  1. on the control panel press the right arrow key, and then the configuration icon.

  2. press on the down -arrow, then Preferences.

  3. touch Date & time.

  4. set the date & time.

  Hope that helps.

• OfficeJet 6600: Office Jet 6600

  Hello

  I am a new Member. I have an Office Jet 6600 printer all-in-one. The instillation disk will not load because I have windows 8 and it works on XP etc. I know that there is a patch or fix somewhere to get the loading disc because I had to work until my laptop crashed and I reset it.  How to operate on Windows 8?

  Thank you.

  Carole

  Hello

  Thank you for using the HP Forums.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• Office Jet Pro8610: how to enlarge a document when it prints.

  I need to enlarge a model. I so want to set up the printer to copy the original and enlarge it at the same time. How do I do this with an all-in-one Office Jet Pro8610. Thanks for any help.

  Hello

  Instead of the original to the marked angle of the glass flat with the top led on this side.

  Click on copy, then click on the settings icon (), and select reduce / enlarge.

  Select custom, and then select the percentage required to your original to enlarge (the printer soustenans 25%-400%)

  Then click the button copy Strt

  Note: if it does not appear on the icon back once to exit the settings menu to copy.

  Shlomi

• office jet 6600 with scanning problem happens to email - error

  Problem of printer Office jet HP 6600 with image scanning to e-mail - error review Monte is finished, it goes to Foxit PDF to e-mail, but it does not send.  I use a laptop Asus with Windows 7.  Thank you

  Hi premid1,

  I want to help you to scan to email with your Officejet 6600. Are you able to scan the computer rather than the scanning to e-mail? I would like to see if we can reach the scan of your email and send it like that. This will help determine if the problem is in the scan file itself, or the scanning to E-mail process. I can't help but wonder if the analysis file is maybe great to email. Description you looks like you have the scan in the email, but cannot send it.

  Please let me know if you can then send via e-mail after the have set from the computer, as opposed to scan directly to e-mail.

• OfficeJet 6600: Office jet 6600 "Scanner failure" error

  I have a relatively new (9 mos old) Officejet 6600. When I turned on it today I got this error "failure of the Scanner: unable to scan, copy or send a fax."
  It is not connected to a computer or network, and is used only for the copy and fax.
  Help! It is in my office and we copy ASAP!

  Hi @wwah,

  Welcome to the Forums of HP Support!

  I understand that you receive an error message on the screen of your 6600 HP Office jet printer. I'd be happy to help you with this.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document that I recommend that you try, products HP all-in-one - a 'Scanner failure' Message is displayed on the all-in-one control panel and you can not scan, copy or fax.

  This paper addresses issues in which a "Failure of Scanner" message displayed on the printer control panel. If a different error message is present, follow the steps in the section "Some a software problem or connection when you try to scan?" to find a document that answers to your problem.

• HP Office Jet 3830: New HP3830 printer ignores printing lines

  Brand new Office Jet 3830 installed as wireless today. Installation OK. Problem is that the printer does not print half superior to most of the lines of print. This problem up and down the page. Used tools to align printer (3 times), cleaning cartridge, smear own page, report print quality and all printer is OK. Any ideas on how to solve the problem would be appreciated.

  Thank you for taking the time to look at my problem. I discovered that the printer is configured to print a 'project' and when I changed 'black and white' usually the problem disappeared. But I'll keep your handy proposed remedies where the problem occurs in the future.

  Thanks Allan

• How to print black and white color image/doc/pdf levels?

  Hello

  I use the Photosmart C4683 and want to print documents in black and white / black white even if the file itself is colored in order to save on the color ink cartridge and more do not require the prints in color.

  I have searched the respective preferences in all directions, but may find them. I know that you can copy and print in b & w start with a color document but how it works when printing? Help, please!

  Thank you very much!

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.
  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to product model (Mac OS X v10.5 or v10.6) or the button view details (Mac OS X v10.7 or 10.8) to display all of the available settings.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.