At boot Dell Studio 540 running Vista, I get a warning that "Windows host process (Rundll32) has stopped working.
After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working. Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either. Can someone please help me - in simplistic terms that I am a silver surfer? Thank you very much.
* original title - yet another problem Rundll32 *.
Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver. I've now updated that and everything seems to work fine - touch wood!
Tags: Windows
Similar Questions
-
SE error windows host process (Rundll32) has stopped working on Windows Vista
Original title: (Rundll32)
Need help fixing this problem microsoft windows popup message, process host windows (Rundll32) has stopped working.
Hello
1. When you get this error message?
2. were there any changes (hardware or software) to the computer before the show?
Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
Step 1: safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
Note: follow step 7 to reset the computer to start as usual after the boot process.
Hope this information helps. -
Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value? the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover
Hi Susan,.
1. are you able to hear the system sounds?
2 are you facing any problem with Dell webcam?
3. What is the number of the model of the computer?
Method 1:
Run the hardware and devices Troubleshooter and check if that helps:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
To resolve the problem with the sound, I suggest to refer to article and follow these steps:
If the problem is not resolved, please respond with more details.
-
Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool. Any help would be appreciated?
Same fixed. At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.
-
Windows Media Player 11 has STOPPED WORKING... XP AND Vista problems
I have a home network with computers XP and Vista. Computer XP is Dell Dimension 4600. Vista computer is HP Pavilion Slimline.
On or about 6/10, WMP 11 on the Vista computer has stopped working properly. Video will not play digital video (mpeg format), previously working but playing the audio from the file and the timer updates the video plays.
Attempt to update the codecs (K-Lite). Didn't help... now, the native multimedia player K-Lite is the same way.
Deleting updates 6/10 and later versions. No change.
System restore of flowing it at 6/9, 6/5, 6/4. Restoration is back with "unexpected error". The logs show a NTFS corrupted and suggested chkdsk run. Filled with chkdsk c: /R with NO ERRORS.
Ran SFC/scannow on Vista machine. He said "no violation of integrity.
Today (6/14), WMP 11 on XP machine has stopped working. Videos will be running, but are extremely hectic, like something, it's stealing time CPU; However, the system idle process is higher than 90%.
What the hell is happening?
EDIT TO add: I want to stress something else... Movie Maker on both machines still work. Videos can be imported into and read correctly.
I had things market... Finally.
I have none of the above. I do not have the installation diskettes (OEM on a computer HP... no disks provided with the machine, have only the recovery disks that I made when I configured the system).
So until I went looking for a set of discs that I use, I did the following... and I * think * I know I could fix it, but I do not know...
I have re installed the K-Lite codec pack... only of video codecs. I essentially took the video installation by default EXCEPT... I turned off video acceleration. Intel Express Chipset not allow me to disable hardware acceleration by using its own GUI and Windows Vista would not touch parameters of acceleration as Intel ordered to them. Well, I suppose that K-Lite has been able to do what could not do Windows and Intel wouldn't let me do.
Don't know if that was the fix or not, but everything works now.
-
Computer freezes Vista, get the error of the audio control panel has stopped working
my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work
Reference Dell inspiron 5305 windows edition running Home premiumHello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
Windows Vista Home Premium, Windows host process (Rundll32) problem.
Hello. I use Winpatrol to monitor changes etc for my operating system and Applications. Recently, I saw a notification asking me to accept a change to the process described above.
He asked if I would accept a change to:
Rundll32.exe ieframe.dll, OpenURL %
to C:\Windows\System32\ieframe.dll,OpenURL % C:\Windows\System32\rundll32.exe
I recently re-formatted the hard drive on the PC displays the message and I think that this has something to with the upgrade from IE7 to IE8.
If this is the case and is safe to accept the change, then this is good. However, I would like to be sure that it is not a piece of Malware, be smart and try to emulate the Windows genuine process.
Thank you very much
Hello
Make a Restore Point and then accept it as it looks normal. (Don't count on an already made Restore Point
as she could make too many changes if used.)How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hallmark Card Studio will not open? I have Windows 7. He has been working
HALLMARK CARD STUDIO 2010 WILL NOT BE OPEN. I HAVE WINDOWS 7. HE HAS BEEN WORKING.
Hello
1 did you change on your computer before this problem?
2. you receive an error message when opening it?
You can follow the methods below and see if it works very well.
Method 1
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual
Check whether the problem is resolved.
Method 2
If the problem persists, you can uninstall and reinstall the program once more and see if it works very well.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
You can re - install the program on the site of the trademark.
-
in Vista, the Service Manager has stopped working
I get a window saying delivery Manager has stopped working to come
Hello
· Will there be any changes made prior to this issue?
I suggest you try the steps mentioned below.
Step 1: Test in safe mode problem
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: Perform a clean boot, if the problem does not occur in Mode without failure.
A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.
http://support.Microsoft.com/kb/929135
Note: Please make sure that the computer is configured to start as usual by following step 7 of article.
Additional information:
Details of the event log
Whenever you encounter this kind of problem, please check the event logs for details of the exact problem.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
-
original title: Windows Vista essentials
Message: Hello. awhile back my secuity essentials has stopped working and I received messages that I needed to replace it with a windows essentials vista (version) I'm not sure of the exact wording. I had to pay for it and I used it for I don't know how long. Now two days ago, that the first security essentials has started to download it again and the vista version just disappered. If someone can tell me what is happening? Thank you.
Vista WIndows
Message: Hello. awhile back my secuity essentials has stopped working and I received messages that I needed to replace it with a windows essentials vista (version) I'm not sure of the exact wording. I had to pay for it and I used it for I don't know how long. Now two days ago, that the first security essentials has started to download it again and the vista version just disappered. If someone can tell me what is happening? Thank you.
Vista WIndows
You have been SCAMMED.
The real name is called... Microsoft Security Essentials.
The program is FREE.Here is the link to download MSE, Microsoft Security Essentials:
http://www.Microsoft.com/en-CA/security_essentials/default.aspx
UNINSTALL any "windows key vista (version)" you have, if you don't find in your application programs and features.
You said "the vista version just disappered ', I hope that this is the case.What do you mean now "two days ago the first security essentials has begun to download again"?
How?
You started the download and installation, or he did in itself?What made this 'thing' called?
-
Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?
Hello
try a SafeMode system restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Hello
I installed Windows 7 this weekend with the offer of the student. Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions. Is it possible that I can download a fix or download the WMC for Windows 7?
My computer (laptop) is a gateway T-6836 64-bit.
original title: WIndows 7 media center has stopped workingI upgraded to Win7 upgrade thestudent and my WMC keeps stopping whenever I try to open it. Is there a way to fix this or if I do a clean install of the operating system?
This is the error I get:
Description
Stopped working
Path of the Application of vulnerabilities: C:\Windows\ehome\ehshell.exeSignature of the problem
Problem event name: CLR20r3
Signature of the problem 01: ehshell.exe
Signature of the problem 02: 6.1.7600.16385
Signature of the problem 03: 4a5bd053
Signature of the problem 04: mcstore
Signature of the problem 05: 6.1.0.0
Signature of the 06 problem: 4a5bda1e
Signature problem 07: 1 a 1
Signature of the 08:146 problem
Signature of the problem 09: System.InvalidOperationException
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033Additional information about the problem
Bucket ID: 655435415When you see failing requests like this, even if you get it to work, you never know what's going to arise later. I suggest to use the feature of easy to backup transfer all your data and do a clean install.
-
I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again? Thank you, Glenn
Hello
Please check the help below documents depending on your operating system:
Error: "License has stopped working". Windows
Error "Licensing has stopped working". Mac OS
Hope that helps!
Kind regards
Sheena
-
Dell Studio 1737 running the Windows Vista operating system. Hard drive errors
My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?
My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?
Hello
This Dell 2000-0146 error code is for a failed hard drive / failed.
You will need to replace and reinstall the operating system.
Save your data as soon as POSSIBLE.
See you soon.
-
Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.
I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.
Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)
Maybe you are looking for
-
Satellite Pro U400 freezes when toshiba load screen appears
Please can someone help me! When I turn on my U400 it gets to the loading screen toshiba, but then everything freezes and used further.I tried f2, f8 and f12 but also simply freeze and goes no further. The hard drive light flashes at the start but th
-
They think that my motherboard needs replacement, but I got private stuff I want to see - what about my privacy? are they looking at my stuff on my hard drive? I don't care if he is devastated, I just want that he kept secret... Isn't - this automati
-
Norton Internet Security should be included in the list of startup programs?
I use Vista Home premium 32-bit with SP2 for VistaNorton Internet Security 2010 v 17.8.0.5 When I go to:Run > msconfig > Start Up Programs I don't see anything there about Norton or Symantec.I see it running in the list of services, but NOT in the li
-
XP in Win 7 as a client and server
I have a Thinkpad and desktop windows XP on Windows 7. I want to turn my office into a server and access the hard drive of my laptop when im at work. Is it possible to go in windows? or a way to do it for free? I only want to give permission to my ce
-
I can't view the folders in my USB flash :(
I can't view the folders in my USB flash.when I open the properties of the folder, the hidden option is checked and not accessible.can someone help :(