SE error windows host process (Rundll32) has stopped working on Windows Vista
Original title: (Rundll32)
Need help fixing this problem microsoft windows popup message, process host windows (Rundll32) has stopped working.
Hello
2. were there any changes (hardware or software) to the computer before the show?
Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
Step 1: safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
Note: follow step 7 to reset the computer to start as usual after the boot process.
Hope this information helps.
Tags: Windows
Similar Questions
-
Original title: Installation files
I need to know how to reinstall a corrupted file. It's only an individual file which gives me the problem. I don't want to reinstall the entire windows file just to retrieve a single file. The file is the file that controls the video card (rundll32.exe).
Hi Richstan06,
Step 1: Run the fixit available in the link below and check if that makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox
Step 2: The computer in the boot and a test
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can consult the documentation of the material for more information on diagnosing the problem.
See the article below, which deals with a similar question
Error message when you try to configure an audio playback device disabled in Windows Vista: "Windows host process (Rundll32) has stopped working.
http://support.Microsoft.com/kb/953916
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support EngineerVisit our Microsoft answers feedback Forum and let us know what you think.
-
Windows host process (Rundll32) has stopped working
Is a general Vista problem and also a general problem of Thinkpad, but it has what I feel to be a frequency among the W500s so I thought to post it here.
In recent weeks, I got this error (Windows host process (Rundll32) has stopped working) several times. A lot of googleing will tell you that it can be caused by a number of things, for example other video programs, Nero burning software, video codecs and burning software and the ATI catalyst control center.
For me, uninstalling the ATI catalyst control center and the rest of the correction of the error of video card drivers. Resettlement has reduced. Uninstall them and then only by reinstalling the driver first, then check catalytic Center later after another reboot all reinstalled successfully and also got rid of the error.
However, two days ago I updated my lenovo Power Manager and after the next restart, I started getting this error again. I tried the trick with video drivers, but this time I was not so lucky. Uninstall them completely is not even get rid of the error. I think only it is the new power manager I uninstalled everything and somehow got rid of the error.
I'm about to reinstall the power manager and I hope he's not bring error.
Another thing, I found that can cause this error:
I'd just do a fresh install of vista and lenovo apps + Manager supply and everything worked. Since I never use the optical drive, I went to the Device Manager and disabled, which gave me the error Rundll32.exe about 60 seconds later, and this caused again Manager power to stop working, even after that it recharges.
I finally understand that disabling my optical drive Springs somehow this error on me which then also stops Power Manager. The optical drive from the reactivation got rid of the error immediately.
-
Windows host process Rundll32 has stopped working ONLY at startup on the desktop.
When I start my Dell Inspiron 531 after that sign in the screen will Dim twice for a few seconds then the Windows host process Rundll32 has stopped working window appears. If you close another small window exactly the same error message mentioned above tells you that Windows will look for a solution but NEVER done. I use AOL version 9.0, I can sign and the big surf for dial-up access. I tried to download free Kaspersky on their site and an error message said it was incomplete or corrupted. I have Windows Security Essentials, Stopzilla, CCleaner, Glary Utilities, you run sfc/scannow, it cleaned up a few files and he tells me that he has no integrity problem after 4 scans. The big short PC but what the _ is causing this Rundll32 error and why is there NO information specific on how to solve this problem? Also Internet Explorer cascades tiles and diverts the PC sometimes force a quick stop, it's really weird to see, very rare but happens. Systerac Fix of Windows crashes after starting an analysis on current user files, really strange, as if something is trying to stop him on purpose. I wish that Microsoft would really worry about the Rundll32 error of work ceased and tell us customers how to fix this shit it is very boring I'll tell you. I want that my host process Rundll32 to work as it did for the past 2 years with no error message at startup. He never gives me these messages while I use the Internet. There are many pages of misinformation out there, can some Microsoft Engineer please give me that a definitive answer in particular to the Windows host process Rundll32 has ceased to function the error at startup ONLY and tell me how to fix Rundll32 file or the process, it would be greatly appreciated? Thank you. Woman
Hello
Be careful of having too many programs antivirus/security on the computer running much less
at the same time. Have a single load at the same time as even the remains of one can cause a lot
problems.------------------------------------------------------
What is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG, then post a list
of these here.--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have
Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Startup Type
(Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.Please help, I need to uninstall something!---------------------------------------------------------------------Windows host process (Rundll32) has stopped workingSignature of the problem:Problem event name: APPCRASHApplication name: RunDll32.EXEApplication version: 6.1.7600.16385Application timestamp: 4a5bc637Fault Module name: StackHash_9629Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec49b8fException code: c0000374Exception offset: 000ce6c3OS version: 6.1.7601.2.1.0.768.3Locale ID: 2057Information additional 1:9629More information 2: 9629b7be96a6d05c3ae74dcb4df31847Information additional 3:2716Additional information 4: 271690c76c60b0182163ae26acc5f429Read our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txt
Hello
Method 1:
I suggest to set up the computer in a clean boot state, then try to uninstall the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working. Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either. Can someone please help me - in simplistic terms that I am a silver surfer? Thank you very much.
* original title - yet another problem Rundll32 *.
Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver. I've now updated that and everything seems to work fine - touch wood!
-
a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
Check if you have picked up malware in your travels.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/Check in safe mode.
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/See if you can isolate a possible cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Windows host process Rundll32 has stopped working and was closed for 2 months now?
What this means and why not, I received snap problem whatever it is? I don't know what that means he started to say 2 months when I start my computer, the only difference I noticed is I can no longer view or change my pictures from picture windows or windows live that looks like I have a Jammer or something that looks like this photos have no color wavey lines and blurry? can someone help me? address email is removed from the privacy *.
Hello
Rundll32.exe is a system file which loads the required files library (.dll) for a routine on request. From what you describe, it seems that the library file, you are trying to load to support the display of images is corrupted or damaged. Open a command prompt by typing CMD in the line of departure and search, then right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:
sfc/scannow
When done, exit the command prompt and restart the system normally. Then try to use all the measures you were doing that causes the error to appear. If it happens again, please post back with the exact text of the error (you can use the event viewer if it flashes too fast).
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
I looked for answers to this problem, and while some deal with similar aspects, none were completely relevant. Step by step, is what happened:
I downloaded Haali Matroska Splitter since the first result in Google, open the zipper and it ran, if I even got that far. Since that time I have been see two posts above, constantly. I turned the computer on and it persists as soon as it started. I can't access 'msconfig', or other programs that could help because apparently everything works through Windows Explorer. I'm currently looking 29 Admail without loading boxes "restart Windows" on the laptop in question, while writing this to another. Please help, as I am a complete no-hoper to a compliacted question. I would be grateful you're not assuming that I know anything about technique and describing all the solutions in a progressive manner. Thanks a lot people.
I used a system restore and everything seems OK. Wish I had known that earlier would have saved a lot of headaches.
-
Windows process (Rundll32) has stopped working
Windows process (Rundll32) has stopped working
Do you find it at the start of the computer / when you open a session? If so, consider using Sysinternals Autoruns to disable the rundll32 entries. Then add one at the time and reboot, back them up until you reproduce the problem. The last of them on would seem to be the problem. You can find more far away.
Also consider anti-malware analysis.
-
Host Windows precess "rundll32" has stopped working
Hello
Recently, I sent my computer to be repaired after a blackout in my House sent a pic of power through my computer and damaged my diet when I got this fixed computer and turned my back on continue to get this error;Log name: Application
Source: Application error
Date: 01/03/2013 23:04:04
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: Darragh-PC
Description:
Failed application rundll32.exe, version 6.0.6000.16386, time stamp 0x4549b0e1, failed module sprote ~ 1.dll, version 0.0.0.0, time stamp 0x50212e17, exception 0xc0000005, offset error 0x00079aed, process 0xe98 id code, start the application time 0x01cdea069ff6abff.
The event XML:
1000
2
100
0 x 80000000000000
1105789
Application
Darragh-PC
Rundll32.exe
6.0.6000.16386
4549b0e1
Sprote ~ 1.dll
0.0.0.0
50212e17
c0000005
00079aed
E98
01cdea069ff6abff
Or in short; "Windows host process (Rundll32) has stopped working.
I tried several fixes, but I can't seem to solve the problem, including the replacement of "rundll32.exe".
Is there a way someone could walk me through several different steps to try to resolve the please my problem? It would be much appreciated.
Hello
According to the description, I understand that you get an error message.
"Windows host process (Rundll32) has stopped working. I will definitely help you with this problem.
(1) did you do changes on the computer before this problem?
(2) when exactly you receive this error message?
Method 1:
Step 1: Place the computer in a clean boot state to check the question
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf the issue is not persistent, then follow the article to find the cause of the same thing.
Step 2: I suggest you to place the computer in clean boot mode and check if the problem persists.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to configure the computer to boot:
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, see step 3 of the link to clean boot the computer to a normal startup mode.Method 2: File system (CFS) Checker
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
(a) click Start and type cmd in the box start the search.
(b) right click on cmd in the list programs, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
(c) when the control calls, the following line and press on ENTRY:
sfc/scannow
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
http://support.Microsoft.com/kb/929833
I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.
-
When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".
I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?
I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.
SpamLessSN
Hello
Are what contacts/address address you referring to?
Perform the following steps in order to correct the damaged user account
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileHope this information helps. -
My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.
I'm almost illiterate with these things.
Any help
Thank you
Original title: error message
Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.
To test your installation
You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.
-
RUNDLL32 HAS STOPPED WORKING... HOW TO FIX?
I CONSTANTLY GET A MESSAGE THAT RUNDLL32 HAS STOPPED WORKING AND CLOSING THE PROGRAM. HOW CAN THIS BE REPAIRED?
Hello
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I can still click the control however mini to change the functions of the equalizer.
Hey Tim Burdeshaw,.
Bluetooth headset works with other devices correctly?See the link below and refer to the spirit x links posted. It has some wonderful troubleshooting for Rundll32 error steps.Give those a try and let us know your results and if something didn't work, explain what happened.Thank you!
Maybe you are looking for
-
How to connect printer 2.4 Ghz band dual band Airport Extreme?
I need a new printer connect to my Imac running OS 10.7.5 wirelessly. My router is multiband Airport Extreme. Most printers seem to does not support multi-band wireless; they can't stand the 2.4 Ghz band. Is there some document printers (I need s
-
original title: "Online connection" disappeared... WHY??????????????? My computer keeps a box indicating "Dial up connection" has failed or something, then the "connection online" has disappeared... WHY???????????????
-
Original title: Spider Solitaire on Windows XP has been removed. How can I reinstall? and I don't have the windows Xp CD. How can I get a spider solitaire I loved :((lealy
-
Order of procedure SonicWALL for routing, NAT and policies
I'm confused on the prescription that the sonicwall verifies a package. The way I heard the order, it will: (1) check against the access rules, (2) check against NAT Polies (3) check the routing. Installation program: Subnet point of VPN endpoint -
-
HP SureStore App fails to J: drive letter missing
No help for Hrdware Office: Win 7 Hm Prem - I «Believe» my HP Pocket Media Drive BkUp software is not working NOW because the removable disk "Drive letter" (J) he had ALWAYS disappeared. With a removal of Temp of my HP PD3200X (BkUp) Reader USB Verba