Attach files until the instance was created

Similar Questions

• Virtual disk parent has changed since the child was created.

  I recently had one of my virtual machines go down and I couldn't connect to access anything whatsoever, so I rode as an extra hard drive to another virtual machine in order to access the data I needed.

  Once I had finished I he took off the other VM and proceeds to the power on the virtual machine, but I got an error of:

  "The virtual disk parent has been changed since the child was created." The content of the virtual disk ID parent does not match the ID of parent matching the child content. »

  Reason: The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  Cannot open disk ' / vmfs/volumes/4e24c6fe-3c2ad61e-a57c-e4115bbbce6c/SNCTrillium/SNCTrillium-000003.vmdk' or one of the snapshot disks it depends on.

  I read upward through the knowledge base of VMWare on the modified files, but I've never had to do that before and I'm not sure about how to go on this subject as I've never used the vsphere CLI either.

  I am currently using ESXi 5.0.0 with vsphere client 5.0.0. I've attached a screenshot of the error.

  According to the snapshot between SNCTrillium - 000001.vmdk and the basic disk SNCTrillium.vmdk is broken, which means that the basic disk has been changed. I have attached an instant replacement for the SNCTrillium - 000001.vmdk with a fixed string that should allow you to open the virtual machine. However, since I do not know what and how much data has changed on the basic disk, I can't tell you how much data corruption, you will see. So you better take an another snapshot to be temporary once loading hard file attached, in order to ensure the current hard data files cannot be changed.

  André

• Problem with a VM server: "the virtual disk parent has been changed since the child was created.

  Hello!

  I have a problem with a server that does not start.

  We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.

  This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
  instead of being referenced to the instant vmdk and used for a few days.

  All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.

  We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
  to correct the CID made reference, but when we try to start the virtual machine, we got this error:

  "The virtual disk parent has been changed since the child was created.

  I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
  And because it has been referenced and used in another vm.

  *** Log is attached

  Thank you

  Bruno.

  It is a bad sign

  next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible

• Lately my Windows Live Mail is no longer allow me to attach files to the message.

  Windows live Mail

  Lately my Windows Live Mail is no longer allow me to attach files to the message.

  When I try, I get the following error window:
  "The file picker was suddenly closed by Windows" and this happens everytime I try to join.
  Send and receive e-mail works great.
  I also tried to run the command file check:
  c:\sfc/scannow
  invites me to insert the Windows XP Pro SP3 CD disc.
  Since this is a computer that is about 41/2 years I have
  original OEM Windows XP Pro disk, even if I've upgraded to SP3 via MS download
  How this rpoblem of e-mail can be fixed?
  I really need help with this question
  Thank you

  Hi Tell214,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Why have I not two selectable organization even when the pack was created in Creative Packager Cloud?

  Hello

  I have a problem when the pack was created in Creative Cloud Packager, there are two selectable 'same' organisation.

  The first one named "Centre professional of the Littoral Neuchâtelois" offered license type ' named ' or 'license of device.

  The other named "Centre professional of the Littoral Neuchâtelois" (ditto) offered only a license type "named license.

  

  My question is why do I have two organization?

  Thank you very much.

  Pellaton Roman

  It seems that your ID is associated with two accounts.

  We have an approval attached and the other has a license of creative teams of cloud (username).

  If you want to check more details about these accounts please contact customer service

• The virtual disk parent has changed since the child was created

  Hi all, need your help with this one.

  I deleted two snapshots and now I can not start the virtual machine.

  Get the following error:

  Reason: The virtual disk parent has changed since the child was created.
  Cannot open disk ' / vmfs/volumes/4c483d34-a8c778c4-46a5-001cc460f09e/WEBPDXXXY/WEBPDXXXY_1-000003.vmdk' or one of the snapshot disks it depends on.

  I tried that link but still did not work KB: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1007969

  I can still see the WEBPDXXXY_1 - 000003.vmdk, WEBPDXXXY_1 - 000002.vmdk and WEBPDXXXY_1 - 000001.vmdk when I browse the data store.

  WEBPDXXXY_1 - 000003.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 59fab513
  parentCID = a4a63bd5
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000002.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDWEBPDXXXY_1-000003 - delta.vmdk.

  # The database disk
  #DDB

  WEBPDXXXY_1 - 000002.vmdk
  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = a4a63bd5
  parentCID = 0f8995f3
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000001.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000002 - delta.vmdk.

  # The database disk
  #DDB

  DDB. Deletable = 'true '.
  ddb.longContentID = "ab1b7008e386c884ae920930a4a63bd5".

  WEBPDXXXY_1 - 000001.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 0f8995f3
  parentCID = 926f96fa
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000001 - delta.vmdk.

  # The database disk
  #DDB

  ddb.longContentID = "0336846d9f849b4b97ad028f0f8995f3".
  DDB. Deletable = 'true '.

  WEBPDXXXY_1.VMDK

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.

  CID = 926f96fa

  parentCID = ffffffff
  isNativeSnapshot = 'no '.
  createType = "vmfsRawDeviceMap."

  # Description of the measure
  RW 209715200 VMFSRDM ' WEBPDXXXY_1 - rdm.vmdk '.

  # The database disk
  #DDB

  ddb.toolsVersion = "8295.
  ddb.adapterType = "free".
  DDB. Geometry.sectors = "63".
  DDB. Geometry.Heads = "255".
  DDB. Geometry.Cylinders = "13054.
  DDB. UUID = "60 00 C2 92 41 62 5 d 8f-10 59 12 60 53 0 to a8 94.
  ddb.longContentID = "b204c5bc523bbc83c01dd3ed926f96fa".
  ddb.virtualHWVersion = "7".
  DDB. Deletable = 'true '.

  Is there a chance to run ls-lisa from the command line (SSH) in the virtual machine folder and provide the output!

  I ask because I'm a little worried about the timestamp of the hard (May 2011). Depending on the size of the files in the snapshot, it seems that the second virtual disk is not really used by the guest operating system and we could come back manually (by editing the .vmx file) on the resized basic disk (100 GB compared to 75 GB for snapshots) without losing important data!

  If you want to revert manually,

  • delete the virtual machine of the inventory
  • backup and then edit the .vmx file (replace "WEBPDMAPPD_1 - 000003.vmdk" with "WEBPDMAPPD_1.vmdk")
  • Move 3 snapshots in a directory temporary sub
  • Add the virtual machine to inventory
  • create a new snapshot to prevent the current hard files to be modified
  • Turn on the virtual machine

  If everything works as expected, you can delete the snapshot files moved and remove the snapshot created in the Snapshot Manager again.

  André

• repair broken CID-String > the virtual disk parent has changed since the child was created.

  Hello

  We have ESX 3.5 Update2

  During the withdrawal of one of the many snapshots, the process has been crushed and the CID string seems to be corrupted.

  Now the last work of x file - 000006.vmdk cannot start because the file is based on x - 000004.vmdk.

  Now, I get this message:

  Cannot open disk /vmfs/volumes...x-000007.vmdk or one of the Flash disk that it depends on.

  Reason: The virtual disk parent has changed since the child was created.

  If you provide vmdk small text files, all the vmware.logs, the vmsd file and the vmx file I can look into it

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Help, please! Snapshot after expand VM, virtual disk parent has changed since the child was created

  OK, here's the situation, (maybe you can find a lot of discussion on this one)

  I have a vmware server running SuSE Linux Enterprise Server 10. I use as its host vmware ESX 3.0.1.

  I realize that I need to extend the drive because he must have more space disk for the production server. Then I resize the disk using vmkfstools x 90 G TARANTELA - TEST.vmdk. The bad news is, I didn't know that the server has a snapshot on VI client. As you know, the error occurred:

  Failed to open the disc

  "/ vmfs/volumes/4652e777-3eb2a038-8fce-0019bb343796/TARANTELLA-TEST-000007.vmdk" or one of the snapshot disks it depends on.

  Reason: The virtual disk parent has been changed since the child was created

  Then I remove the snapshot of the VI client and re-save the virtual machine to inventory, but it may yet open the disc unless I edited the .vmx line file:

  scsi0:0. FileName = 'TARANTELA-TEST - 000007.vmdk '.

  TO

  scsi0:0. FileName = ' TARANTELA - TEST.vmdk.

  It runs as the first time I installed the system, but all the important configuration is in 'TARANTELA-TEST - 000007.vmdk' snapshot.

  Someone there the sollution, how can I do my work of snapshot again?

  Kind regards

  Arfal

  In SL32-AP-TARANTELA - TEST2.vmdk

  change

  CID=dc621992
  

  TO

  CID=ce700012
  

  and

  RW 188743680 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  TO

  RW 31457280 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  and

  ddb.geometry.cylinders = "11748"
  

  TO

  ddb.geometry.cylinders = "1958"
  

  in SL32-AP-TARANTELA-TEST2 - 000007.vmdk

  change

  RW 188743680 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  TO

  RW 31457280 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  And then you change the changes you have made to the VMX file.

  Try power o the VM - you will get probably mistakes (inside the virtual machine).

  If this works report back (we are not yet made).

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• [CS6] Download the version of the application in which the document was created

  Hi all

  Is there a way to get the version of the application in which the document was created?

  For example: I have a CS6 plugin in which I want to know if the current document has been initially created in CS3 or CS5 or so away.

  Any help will be much appreciated.

  Use IMetaDataAccess from IDocument.

• The selected file cannot be linked because there 6 audio channels, and the clip was created with 2

  I tried to link the MTS files to a project that I have edited with AVI files. I got the message "the selected file cannot be bound because it has 6 audio channels and clip was created with channel 2/channel" audio. Does anyone know what I need to do?

  I had this problem and the cause in my case, it was that I changed all my clips in the project are mono audio channels. When I tried to swap the originals with proxies, I did, I had a similar message for the clips that have been affected by the designation of channels. I opened the project and selected all my media items in the project window and changed all the audio back to 'use the file' and that did the trick for me.

• cannot open mswmm file - he said: it was created in a version of movie maker which is not supported.

  Similar questions seem to have been requested several times - but with no satisfatory answer that works for me

  I saved a project in movie maker and subsequently he published successfully.  I lost the published file and now cannot re - open the mswmm file - he says that it was created in a version of movie maker, which is not supported.  How access you the project or convert it to a DVD or other format that I can open?  Since the creation of the file for over a year, I transferred to a new laptop.  Running XP, SP3 currently and no other problems.

  Thank you

  See this

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-open-a-Windows-Movie-Maker/f43aad8a-6eb9-4D41-833b-d2e669e825e1

• attach files to the incident

  Hi all

  Can someone give me solution to attach files to an incident that is generated after the submission of the interview.

  Hello, welcome to the forums. Is the Incident generated a RightNow datasource being recorded (I assume you are using the Cloud of OPA version)?

  If so:

  You can add a control to "Download" on any screen in your interview, which will allow a user to attach files.

  If so, you can save files to an incident with current limitation. OPA is creating attachments for the object being created or updated and the end of the interview. So if mapping projects says "create: Incident", or updated Incident. " Then it will be added to the incident.

  Otherwise:

  Can give you details as to what version of OPA are you using and what system you are wanting to save attachments.

  See you soon

  Frank

• Add all files in the path when creating file folio in Folio Builder

  Hello everyone.

  I'm using InDesign CS 5 and the creation of folio for iPad 2. My Folio builder was working fine until last week, but all of a sudden I see a change in the way it behaves. When I update the files in the Folio Builder, it adds all the files in the path of access (not only the links in the file), including source of PSD files and other related files that I have never used in InDesign, do folio file will increase in size. Can someone help me please how do I remedy this situation?

  I thank you very much in advance.

  I look forward to your solution.

  You have an HTML file in there? If so, put it (as well as its assets) in its own folder.

  Bob

• AppleScript: Select the audio files in the Finder, to create playlist

  So, I have modified this Applescript courtesy of WoodenBrain and tried to deconstruct to use. What I need to do, is to be able to select the audio 3-4 files in the Finder, then contextually, select the function "Add to iTunes Playlist", that iTunes ask me for the name of the playlist, create playlist and add files. The script below which realizes, but has an additional step that allows you to select available playlists. I want to remove and don't have iTunes adds the music files to the newly created playlist.

  I know that the solution is somewhere between the block of choice, but I can't seem to get the name of the created playlist and use the the_plvalue. Any ideas?

  on run {parameters}

  Try

  Activate application "iTunes."

  say application "iTunes."

  define newFile to the text returned by (display dialog box default response "Playlist name?" » »)

  make new user playlist with properties {name: newFile}

  set the_playlists to the of each user playlist whose name friendly special is none and smart is false

  the value the_playlists to iSort (the_playlists) to me

  (* to remove the next block *)

  say me to the value the_choice to choose from the list the_playlists with prompt "Add selection to this playlist:

  If the_choice is false then error

  the value the_pl to issue 1 of (every playlist whose name is the_choice)

  (* end choice block *)

  activate

  the value reduced to window 1 to false

  the value cn to (number of points in entrance)

  Repeat with I have from 1 to cn

  say application 'Finder '.

  game of the_item to (point as aliasentry, I)

  If I = 1 then set iname to the name of the_item

  end say

  Add the_item to the_pl

  end Repeat

  end say

  end try

  back entrance

  end run

  on iSort (_list)

  _length set to length of _list

  If _length > 1 then

  Repeat with I have since 2 to _length

  Set temp to the point I of _list

  set j to i - 1

  Repeat while (not (j = 0)) and (point of _list j > temp)

  set agenda (j + 1) of _list to the point of _list j

  set j to j - 1

  end Repeat

  set agenda (j + 1) of _list to temp

  end Repeat

  end if

  return _list

  end iSort

  on is

  Hello

  Put the output of the command of playlist make new user in a variable.

  No need of a loop, the add command takes a list of files.

  -----------------

  the term {parameters}

  Try

  Tell application "iTunes".

  activate

  the text returned by the value tNom (show the default dialog response 'The Playlist name?' » »)

  the value of the_pl to the new playlist user with properties {name: tNom}

  Add entry to the_pl

  reveal the_pl - show the new playlist

  tell the end

  try to end

  Back entrance

  end of race