attachMovie load a clip with a touch that doesn't rollover

Similar Questions

• How to use the CD player on my laptop to load the software on my netbook that doesn't have a drive

  I want to use the software that came on a CD with my digital camera on my netbook. However, my netbook is not a CD player but my laptop doesn't. Is it possible to use the player on my laptop to load the software on my netbook and if so how is that done?

  Hello

  try to copy the software on a flash drive and install it like this

  for assistance, contact the manufacturer of netbook

• Can I load MDR100ABN listener using the charger that comes with mobile phones

  Can I load MDR100ABN earpiece with charger that comes with mobile or camera DSC-HX90V

  Hello, ss2016!

  It is recommended to use only the USB cable provided with the product itself. But if it is a Sony USB cable, then it should be all right. I load all my Sony products with different cables Sony too (as long as the load cables shown in the port of loading of the product), and there is no problem. They all work very well. No problem whatsoever. I never use another cable other than a charge cable Sony with my Sony products. If the is a charger for Sony, there should be no problem using it as a charging cable. Make sure that it fits into the port of loading of the headphones. The DSC-HX90V is also a Sony product, so it shouldn't be a problem using the Sony camera cable to charge your Sony headphones. In other words, make sure you only use cables from Sony to charge Sony products. (But we must ensure that the cable Sony fits into the Sony product)

  Best regards

• Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply a different video transition effect to each photo. It might even be random effects. I see that I can apply a unique to all p transition effect

  Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply different transitions video effects by alternating each photo. It could be random effects. I see that I can apply a unique pictures transition effect at the same time, but how to apply different transitions not one by one? I could do a clip applying different transitions manually as I wish between hundreds of photos, but I would like to be able to repeat all the transitions of a new video by changing only the photos. Is this possible? Or a tool to apply random transition effects between photos? Or a way to automate the actions to apply different transitions similar to what we can do in Photoshop? Thank you!

  But how to apply different transitions not one by one?

  You can not.

  If you wish to make a slideshow with all the transitions better fantasies use something like Pro Show gold.

  Alt drag window project replaces clip/still on the timeline.

• loading movie clip to the stage with AS3 button click

  I'm trying to figure out how to load a clip to the scene with a click of a button and have the movieclip close again with a close button. Does anyone have a step by step on how to do this or links to tutorials.

  Here is an example of what I'm trying to do.

  

  Looks like you are using a 'el' and a 'single '.  they are similar, but they are not the same.

  copy and paste from your code to your properties panel or vice versa to correct.

• Load the clip from the library in target on stage

  Hello. Don't bother anyone with this but have been at it for hours and am at max of frustration level. I am using Flash CS3. I want to flip a button on the stage which will load a clip from my library in a clip that is currently sitting on the stage.
  
  The desired effect would be comperable using the loadmovie command and by loading an external .swf into a target on the stage. Except in my case I want to load a clip in my library in the target, rather than having to load an external swf file. Make sense? The goal of making this way is I want the loaded clip to stand on the stage, while the cursor mills. But when the cursor rolls over another button, I would like a different clip in the library to replace the already loaded by the first button.
  
  Any suggestions would be greatly appreciated. Be precise because I tend to get lost easily with this stuff. Thank you in advance.

  If you want to replace what has already been placed with something new, and then specify a depth rather than using... target.getNextHighestDepth (...) which always goes to the top depth value

  If the target is not a wild animal that would put you in danger, just use... 1 (I think). In all cases, you can find the best value before setting this value in stone using... trace (target.getNextHighestDepth ()); before fixing anything.

  on {(overview)
  target.attachMovie ("Area1Web1", "anyName", 1);
  }

  Shit!... I forgot if that simply pushes the element formerly loaded at a different depth, is probably with my luck. If so, use target.removeMovieClip (); before attaching a new. The bottom line, I always try to offer... look in the files to help... they are your friend (once you get familiar with them).

  Cool!... I spent some time with this friend, I just mentioned and found this diamond in the rough... "If you create or join a new clip on a depth has already a clip, the clip again or attached replaces existing content."

• I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

  Sansa Clip + 4 GB

  MTP mode

  MicroSDHC 32GB

  Windows 7 64 - bit Winamp (no additional plugins)

  I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

  But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

  

  Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

  If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

  Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

  Thanks for any help.

• How to combine left half a clip with right half another

  My situation; I'm filming me as 2 characters in 1 shot.  I have 2 clips with the same game.  In a clip, I am sitting on the left, in the other, I sat to the right.  I would like to combine them into a single element where half a clip left combines with half right on the other.  It is slightly different from the next, cutaway and image in the image.  Is this possible in imovie?  Help appreciated, thanks.

  Hi, Paulways,

  You will not be able to combine half a clip with half left right of the another clip using the cropping features of iMovie video.    However, you may be able to do it using Quicktime.  What you need to do is to crop each clip so that it plays in less than full screen.  In other words, a clip that you just want to the left to play and the other clip just on the right side.  Then you could combine clips in iMovie using side by side.

  Before proceeding to any culture, first you want to duplicate your clips and work with the duplicates if you keep your original recordings.   Once you've duplicated, try the following steps on each clip using Quicktime to crop on the right or left side as needed:

  

  Now you should have two clips, one that plays only the left side and one that plays only the right side.  You should be able to import it into iMovie and use the side by side feature combine them seamlessly.   At least, I think it works.

  If you try it, let us know how it worked.

  Best,

  Rich

• the white lines (with the key that don't meet pluse) comes and goes randomly

  Hello

  I have iphone 6 more.

  Sometimes vertical Whitelines light 1/random th of screen from the top.

  During this time they display, touchscreen doesn't work sometimes and sometimes it works out gibberish.

  I press somewhere else and something else is pressed.

  Then all of a sudden this problem disappears until I use the phone. (no whitelines or touch that do not meet, everything becomes perfect)

  Once I have it put to sleep or leave for some time the problem will come still sometimes.

  This isn't software issue since I reinstalled 9.2.1 ios again and again with full reset. (deleted all my apps just to be sure)

  There is no hardware failure, because the problem is not persistent and works of my screen and touch all the other times. I think that cables or the connection is loose. given that this problem comes and goes randomly. I can live with that, but its * boring. A sec I talk to someone and I can't cut the call.

  Please help me, Service Center said that I need to replace my phone. They will not understand this and I want to just replace it without reason.

  Tip: I live in India where these people are not able to diagnose even the question and want me to pay for something, I clearly did not cause.

  And since my warranty is out, I have to pay appx ~ $ 470 for a problem that no one can tell me and search the Internet or apply basic logic is simply because cable is at fault.

  Again, there is no hardware or software defect. Its a few wiring loose and noone at the apple repair center wants to diagnose what it is.

  All they want to do is replace the * phone without reason.

  I'm sorry, but the loose wiring is a hardware problem. Since there is no authorized Apple service provider who manage the repairs of the screen, their only alternative is one out of warranty replacement of the device, given that your warranty has expired. To be honest, even here in the United States, if Apple tries to replace the screen and it will not fix the problem, their answer would be the same, a replacement of the officer of the WATCH. They do no wiring at the Genius Bars. Your response is more disabled because of your location. You can see if there is a 3rd party competent repair facility that can run on the device. This decision is yours.

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.

  I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Load my Clip + overseas?

  We will make a trip to Europe soon, so I wanted to be sure that I'll be able to load my Clip + there. He would have no problem charging the player via the USB port of a foreign computer, would there?

  Aristaeus wrote:
  We will make a trip to Europe soon, so I wanted to be sure that I'll be able to load my Clip + there. He would have no problem charging the player via the USB port of a foreign computer, would there?

  USB ports are standard all over the world. If you plan to use a plug to load just make sure you have good cards.

• More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  Use Partiton Lofic is a down load for free on the partition, you can also use Easeus Disk Copy. It is a free program with a friendly interface.

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• Windows Vista - I recently updated my free dongle and now its loaded and saved with a mistake,

  Original title: salvation

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hello. Please download this free uninstaller.
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and remove the software and reinstall and check.