Attempts to access a missing user profile

Similar Questions

• Crashes Firefox attempts to access the windows user profiles (maybe)

  After several relocations and other attempts based on comments found in the various positions in the solutions, I'm still stuck here. Firefox installs and works ok with high permissions (run as administrator), but crashes frequently then run normally. In normal mode it still crashes when opening the 'options' dialog box on: page preferences and when you download a file. It sometimes crashes when browsing. No high mode installation happens to 90 percent and crashes, elevated installation works very well. An explanation would be that firefox doesn't have access to C:\users\ < profile >------... at the level he needs, but I was not able to find out why. IE seems to work very well, and I reset the default security settings in IE. The signing of the accident say nothing useful about the reason. I adjusted all the firewall and down the ladder. Everything worked until I got other problems requiring aggressive edits and now all but firefox works. Basic navigation in firefox is ok, and work the plugins like flash and acrobat. So I was stuck on this for about a week, limping and try things. I don't know if it's firefox specific or something systemic, but it would be good to know what is the problem, so I have an idea how to solve this problem. Any ideas would be really appreciated. Thank you.

  So my next move was to create a new user account. The new user has been able to use Firefox normally. Several other problems existed with the original, but not as bad as Firefox user account. In any case, with user created a new account and the old one deleted, it seems once again things are finally normal. My guess is that some elements in the account data has been deleted, by something or someone, and Firefox to access, but did not check the possibility he wasn't there.

• Can't access administrator account, "user profile Service service has no logon.

  I can not access my user account who is the administrator account. An another user account on the computer (standard account) is still available, however. (Which doesn't have a password). I use Windows 7 Home Premium (64 bit?).

  I get the following error message after entering my password:

  "The service user profile Service has no logon.

  User profile cannot be loaded. »

  (Note: the word "service" is repeated in the error message.)

  I have not deleted all the files manually, or altered by the profile and have not installed all the software until the problem occurred, but I'm running anti-virus software (as always).

  I tried to turn the computer power and repeated logon several times in the last 12 hours, but with the same result.

  My profile is damaged? Is it possible to access my user account without implementing the user profile?

  I used this Microsoft Support page using the method 1 http://support.microsoft.com/kb/947215/en-us

  It worked perfectly, & took only 10 minutes to complete. You must have an administrator account substitute, you can go to access these folders.

  Good luck!

• I can't access the old user profiles in Win 7 64 don't bits than current ones?

  I had problems with my hard drive and did an emergency backup. When everything was fixed, I had to create a new user account. I can see the old user profiles if I go into my computer and I can share it with my current user profile. However, I can't get the old user profiles to appear as a choice on the screen to Log In, only the new profile and comments the user account. How can I recover the old option user profiles to connect?

  How can I recover the old option user profiles to connect?

  You can not. However, you can access the data stored in these profile files, if you are signed in under an administrator account.

• No access to Standard user profiles

  Recently, I became unable to access Standard user accounts.  The logon process begins, there is a five second delay, then the annunication "logout" appears.  If I change the Administrator profile, I am able to login normally.  By the sequel, if I return note to the Standard, I am once more failed to connect.  Any ideas?

  Thanks, but I tried before and the results were the same.

  How long this started to happen?
  If not more than 10-15 days, and if you remember that date when everything was OK, use this date as your RESTORE POINT and do a system restore.
  Here is the tutorial for the restoration of the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• Group missing user profile manager

  Server 4.0 on OSX 10.11.1 using.

  I have installation manager profile and work for our students by having the mac server running as the OD server with the profile as well as related to the AD Manager to allow users.  In the Profile Manager, I have a group called student that contains all the users of the student.  He works well with the Manager to set up profile settings to customize the user experience however I noticed today that 1 student shows is no longer as in the Group of students in the Profile Manager.  In two RFAS and editor of search on the mac Server directory the user shows as a member of the student group.

  I can't understand why this appears a user is no longer in the Group Manager profile when everything clearly shows them as a member.

  Problem has to do with LDAP on our Active Directory settings.  The MaxPageSize was too weak, as mentioned in Mac OS x: first 1000 results when querying Active Directory - Apple Support

• Live Preview is open on the tab of Google Chrome, but Chrome is missing from their user profile.

  Hello

  So, to cut a long story short. I have Google Chrome Google Chrome & m32 Canary installed on my desktop.

  I tried to test "Live Preview" and found that when you click on the 'light' bolt I would be presented with a new window of Google Chrome Canary, and its associated profile (extensions and everything) would be absent.
  Preview live would work for a few seconds, until what I was greeted with this error message:

  

  I thought it was obviously a problem with edge Code CC opens the wrong browser as my default browser is Google Chrome (stable M32); not to mention the Canary Islands can only be activated in the default browser.

  So, besides persual I found this convenient link on the github media: https://github.com/Adobe/brackets/wiki/troubleshooting#wiki-check-Windows-registry

  Check the registry to see what settings have been applied, I found that the Canaries (SxS) has been defined as the default chrome.exe launcher?

  

  As well, this is obviously not "normal." and if it is a bug on the behalf of the chrome team, I have no idea, but I changed the default paths to Google Chrome Stable (M32)

  

  Back on Board Code CC, I went and attempted to open the default get startred with the live preview html file. It works as expected and I don't get the error previous edge Code CC threw on the impossibility to load the development page - except that it opens a tab of Google Chrome Stable (M32) skeleton, which is missing from its partner (singular only) user profile. The other matter outside the missing user profile; is that I get now that Google Chrome Stable (M32) error:

  

  Help with this bug would be greatly appreciated.

  Media uses a custom at the launch of Chrome profile so that it is not inconsistent with all the other things that you can run in Chrome.

  The bad news is that you will need to install all the extensions you want to use with the media in the new custom profile. The good news is that it is all being cached, but only do it once.

  To find the cache for this profile, use help > show the Extensions folder and then go up 1 level to the media folder. Custom profile data is stored in the live dev-profile folder.

  Hope this helps,

  Randy

• access to a new profile of the user to the office, sign in.

  Hello there again!

  After all, I perform all the necessary answers on the? I have send I can't access my new user profile that I created. Loop it still in its reboot phase and then return to the administrator log in. here are a few problems that I'm always met in my loptop compaq, windows7 Ultimate 64-bit.

  1. try to connect to a new user profile that I created a domain of the computer. It appears after restarting windows but can't access, message, C:windows\windows32\config\system done profile\dessktop refers to a location that is unavailable. in the hard disk or in a network...

  2. a single access inside the administrator account, but the inside is white only trash and taskbar displays on the desktop screen. in the control panel cannot access menu of the user account.

  3. no internet explore does appear in the start menu bar. but I can access the wifi internet and browse sites by clicking on the other file names with a connection to the Internet.

  4. all programs installed inside my loptop are still inside the installed program, but I can't access it or run programs.

  What should I do about it? I'm going to reformat again or can you give me other solutions to all these problems that could save my computer for this reformatting does not again. Thanks again and I really really apreciate it.

  The location of the profile C:\windows\windows32\config\system profile\desktop is not appropriate. Something must have gone wrong during the account creation process. I would like to create a new account.

• Cannot find the user profile

  After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue.  the following icon says that it cannot find the profile of the user and that a temporary profile has been put up.  I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs.  I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

  The following procedure, you should get pretty quickly:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Damaged profiles are almost always accompanied with alteration of the disc.  In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended.  Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress.  In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot access my safe after the migration of user profile

  Hello everyone, welcome to Australia

  I have a user who migrated their user profile from windows to the field of our profile by using the small business server 2003 to connect Computer Wizard. This wizard have not migrated users or My content Safe fingerprints.
  After connection to the old account and attempts to access my safe with password backup, user could not open it.

  Is it possible for the user to access the content in the folder of the safe MYy that these documents are very important. (Take the user to back up only not ;)))

  Hmmm maybe it's not possible to access the MySafe because the laptop is a part of the domain of s.
  I guess that the laptop was not included in the field when the user has used and saved the files in my safe.
  So maybe you could try to reverse the settings and then you might try to enter the folder MySafe.

• Unable to access user profile after the point of recovery to restore a previous

  On portable computer Satellite internet access via wireless 10mn very slow at startup, sometimes. Suspicious application recently installed making early access before system ready then decided to restore.

  After recovery in safe mode error messages [windows 7] beginning with ie4uinit.exe cannot start also several other progs will not start... temp user is now only access to the machine... it's saying no or applications... ok wireless network... can see files and folders on the hard disk. No application listed program.

  Although the admin user can't seem to find the old user profile or don't implement the new user... no password used

  How can I return to my old user profile please?

  Mark

  As I see that you posted this in the title of the product recovery Toshiba category that your action has nothing to do with the installation of Toshiba Recovery and, for me, it's unwanted Microsoft.

  To be honest, I did not understand what exactly happens, but somehow, I feel everything is messed up.
  My advice: if possible to backup all your important data and do the clean install of image recovery.
  After that what you do will have factory settings and clean OS preinstalled, so you will be able to use your laptop with no problems.

  Your other thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=69938

• "User profile to connect error"%UserProfile% application missing/unable to load".

  Original title: profile to help sign

  I deleted by mistake my user profile on my windows vista computer, so it will not load windows. error message says %UserProfile% missing/unable to load application. When I insert a system restore disc, nothing happens.  Not sure if the cd player doesn't work either. Help, please...  Thank you very much appreciated.

  Also I need a dial-up modem in my windows 7 computer to evaluate the internet is possible to insert a?

  Hello

  Recovery disc are you referring?

  Trying to boot in safe mode and see if you can connect to the user profile.

  Reference:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Answer please if you're able to boot in safe mode to help you more.

  To help you on dail-up modem, you can connect with the Internet service provider, or the manufacturer of the computer.

• How can I access my user account if I receive the message, the service user profile Service has no connection. User brightness cannot be loaded.

  We have access to our user account for children, but ours is the administrative account.  We tried to access through their account, but it's not accept any administrative password possible to alow access.

  Here is the tutorial that everyone will offer you when you have this problem to logon:

  http://support.Microsoft.com/kb/947215

  I have a little more to add...

  The user profile Service has not the user of the connection failed to load profile

  See if the suite you can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do system restore by using the link given above.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• User profile missing after Windows Update, 15/08/2011

  The or about August 15, 2011, I installed the latest Windows updates on my Vista computer.  Upon restart, missing my boot of Mike and say not found user profile.  Me connected under my name, but to a temporary profile - programs are still there, but any user names and passwords are gone.  Help, please!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try running this fixit and see if it helps:

  http://support.Microsoft.com/kb/947215

  Method 2:

  Start the computer to recovery options and try to perform the system restore and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile