attributes accidentally malfunctioning in W7

I think I reset my attributes on my C drive. Now, a bunch of programs return with error messages like:

"Cannot create file"C:\Users\owner\Appdata\roaming\"... "Access is denied.

Also it seemed have lost access to my office with all the files that were there. No one knows exactly, what is happening and how can I reset to my programs write again in the directories under 'owner' and how can find my old office? Thank you

I never said anything about 'Safe Mode'. I said "Repair Mode". Here are the options I see for you to enter in the Repair Mode:

Ask a friend to show you how it's done with F8. Note that some keyboards have the function keys disabled at boot time. If yes then you need to enable them with a dedicated button for function key.
Start the computer with your CD to repair Windows.

Play with the read-only file attribute has no effect because Windows ignores this attribute.

Tags: Windows

Similar Questions

Problems after Satellite Pro U200 has been accidentally deleted

Hey,.

I keep having problems with my laptop Toshiba Satellite pro U200. Problems started the laptop was accidentally deleted.
I will try to describe here:

Laptop started making noise like buzz... all the time.
and it's really annoying. Never, it was so loud.
Another strange thing, it is that we continue to be: after about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all windows just freezes. You can not move the mouse can not do anything, even ctrl + alt + del doesn't work, so I have to push turn off button for a few seconds to turn off the laptop.

I don't know what I have to do?
is this a hardware problem? If that's what should I change?
If anyone has had similar problem please share what you know with me!

Thank you very much!

> After about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all the windows just freezes
I think there could be something wrong with the cooling module.
Is that your fall, the computer laptop and, consequently, the cooling module could malfunction and might makes a strange noise.

Usually, if don t cooling modules to work properly, the temperature rises to a higher level and finally the laptop begins to freeze due to a higher internal temperature.

In fact, this is just my personal opinion and I can't say with certainty what s wrong.
I think you should ask a technician for laptop for a short audit

What I can say is that it really sounds like a hardware problem

Accidental renaming of Recycle Bin Equium A60 - 157 Win XP SP2

Accidental renaming of the Recycle Bin to "54443434...". by a quick fingers grandson with momentary access to the keyboard.

How can I go back to correct title.

The trash is still working OK. It's just the logo of office that has this digital title and I can't get the

Instruction "Rename" in the drop down menu the menu highlighted so that I can use it.

The machine is an Equium A60 - 157 running Windows XP SP2

Hello

I've found this workaround short:

1. start the registry (type regedit in RUN)
2 open the HKEY_CLASSES_ROOT folder
3. open the CLSID folder
4 open the {645FF040-5081-101B-9F08-00AA002F954E} folder
5 open the ShellFolder folder
6. change the data value of 'Attributes' of the ' 40 01 00 20 "to"50 01 00 20".". "
7. change the DWORD "CallForAttributes" at "0x00000000" (double click and change value data to 0).
After this procedure, the option rename must appear in the drop-down menu when you right click on the Recycle Bin icon.

Good bye

Several accidents of Finder in El Capitan

Since I installed El Capitan on my Mac mini (late 2012, i7), I've known several newspapers freezes Finder and accidents. Sometimes the Finder raise on its own, but most of the time, I have to take care of it manually. I'll paste the last report of crash below, but first some notes:

~ I have two internal HARD - a drive and a FW800, both of which are partitioned into two (for a total of four partitions).

~ I generally keep a Finder window open all the time, with four or five tabs showing the records I look in on a regular basis.

~ I am running 10.11.2. Under 10.11.1, I had experienced a strange bug in the Finder, where the contents of Finder tabs would be badly redesigned, often shortly before Finder would become unresponsive. I found finally put the viewfinder mode full screen would require a refresh; the fix worked even after the removal of full-screen.

~ I haven't tried to use another user account. It comes to my work machine, and it would be really disruptive to have to spend a day connected as someone else.

Thank you in advance for your help! This is the last report of the accident, copied from Console:

25/12/15 11:55:29.599 AM Finder [8116]: * reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: ' * + [NSLayoutConstraint constraintWithItem:attribute:relatedBy:toItem:attribute: multiply: constant:]: a multiplier of 0 or a second element no one as well as a location for the first attribute creates an illegal constraint equal to a constant situation. Localization attributes must be specified in pairs

First throw call stack:

(

0 CoreFoundation 0x00007fff9c5dfae2 __exceptionPreprocess + 178

1 libobjc. A.dylib 0x00007fff9709373c objc_exception_throw + 48

2 CoreFoundation 0x00007fff9c5df98d + [print raise: format:] + 205

3 Foundation 0x00007fff94e83ca3 VerifyConstraintArguments + 205

4 Foundation 0x00007fff94e83ace + [NSLayoutConstraint constraintWithItem:attribute:relatedBy:toItem:attribute: multiply: constant:] + 295

5 Foundation 0x00007fff94fa5eec-[NSLayoutAnchor constraintEqualToAnchor: multiply: constant:] + 149

Finder finder 6 0x000000010b021415 + 3269653

7 AppKit 0x00007fff9cb2c25a-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 683

8 AppKit 0x00007fff9cb2c187-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 472

9 AppKit 0x00007fff9cb2c187-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 472

10 AppKit 0x00007fff9cb2c187-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 472

11 AppKit 0x00007fff9cb2c187-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 472

AppKit 0x00007fff9cb2c187 12-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 472

13 AppKit 0x00007fff9cb2c566 __82-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] _block _invoke + 275

The Foundation 14 0x00007fff94e84a15-[NSISEngine withBehaviors:performModifications:] + 155

15 AppKit 0x00007fff9cb2c08d-[NSView _updateConstraintsForSubtreeIfNeededCollectingViewsWithInvalidBaselines:] + 222

AppKit 0x00007fff9cb2bef3 __45-[NSView updateConstraintsForSubtreeIfNeeded] _block_invoke + 49 16

The Foundation 17 0x00007fff94e84a15-[NSISEngine withBehaviors:performModifications:] + 155

18 AppKit 0x00007fff9c9a368a-[NSView (NSConstraintBasedLayout) _withAutomaticEngineOptimizationDisabled:] + 70

19 AppKit 0x00007fff9cb2be8e-[NSView updateConstraintsForSubtreeIfNeeded] + 114

20 AppKit 0x00007fff9cb2bdfa __62-[NSWindow (NSConstraintBasedLayout) updateConstraintsIfNeeded] _block_invoke + 141

21 foundation 0x00007fff94e84a15-[NSISEngine withBehaviors:performModifications:] + 155

22 AppKit 0x00007fff9c9a368a-[NSView (NSConstraintBasedLayout) _withAutomaticEngineOptimizationDisabled:] + 70

23 AppKit 0x00007fff9cb2bd19-[NSWindow (NSConstraintBasedLayout) updateConstraintsIfNeeded] + 208

24 AppKit 0x00007fff9cb2ef31-[NSView layoutSubtreeIfNeeded] + 155

Finder finder 25 0x000000010ad81089 + 516233

Finder finder 26 0x000000010ad80a50 + 514640

Finder finder 27 0x000000010ad8059b + 513435

Finder finder 28 0x000000010afe9770 + 3041136

Finder finder 29 0x000000010b0124dd + 3208413

Finder finder 30 0x000000010ad81bbb + 519099

Finder finder 31 0x000000010aeb03a0 + 1758112

Finder finder 32 0x000000010ad7e8ea + 506090

Finder finder 33 0x000000010ad7a650 + 489040

Finder finder 34 0x000000010ae75f2f + 1519407

Finder finder 35 0x000000010b0adecc + 3845836

Finder finder 36 0x000000010b0a6c96 + 3816598

Finder finder 37 0x000000010ae75b89 + 1518473

38 AppKit 0x00007fff9caba8dc forwardMethod + 126

AppKit 0x00007fff9caba8dc forwardMethod + 126 39

40 AppKit 0x00007fff9caba8dc forwardMethod + 126

41 AppKit 0x00007fff9caba8dc forwardMethod + 126

42 AppKit 0x00007fff9caba8dc forwardMethod + 126

AppKit 43 0x00007fff9d168d1d-[NSWindow _handleMouseDownEvent:isDelayedEvent:] + 6322

AppKit 44 0x00007fff9d169fad-[NSWindow _reallySendEvent:isDelayedEvent:] + 212

AppKit 45 0x00007fff9cac2735-[NSWindow sendEvent:] + 517

AppKit 46 0x00007fff9cabee49-[NSApplication sendEvent:] + 2540

Finder finder 47 0x000000010ad21bad + 125869

AppKit 48 0x00007fff9c9f203a-[NSApplication run] + 796

AppKit 49 0x00007fff9c974520 NSApplicationMain + 1176

Finder finder 50 + 22856 0x000000010ad08948

51 libdyld.dylib 0x00007fffa04c75ad start + 1

52?                                 0000000000000001 0 x 0 x 0 + 1

)

~ I haven't tried to use another user account. It comes to my work machine, and it would be really disruptive to have to spend a day connected as someone else.

As well as a work machine, I'm sure you appreciate the need for a backup. So did a clone before installing El Capitan?   Installation of software not tested on a machine is never wise without a backup.

It is possible that the graphics chip or RAM is bad, and El Capitan is located be more sensitive to this issue.   I would be the hardware test came with your Mac to see if a problem is detected, hold the D key at startup, and track in extended mode. If none is found, it is more likely that the RAM is in question.

You can use Etrecheck to see if there might be some software that you have installed it's not El Capitan compatible or contribute to the problem.   Copy/paste its results here for us to know what you find.   And protect your data if you do not already have: *

http://www.macmaps.com/backup.html

Upgrades rarely difficulty of issues like these.   You need to isolate the problem in its current form until it happens is no longer.

* Links to my pages give me an allowance.

My administrator account has been accidentally deleted from my computer. How to restore this account and all of my programs and Favorites?

My administrator account has been accidentally deleted from my computer. How to restore this account and all its attributes?

try to run a system restore point before the incident.

the system restore function can restore the user accounts and some system folders.

Windows Vista bluescreen malfunction of the equipment. Possibly from Nvidia.

Hello, I was wondering if someone could help fix me my laptop computer malfunction. Two days while my son was playing world of Warcraft graphics becomes very blurry and grainy and the system shuts down completely, prompting a BSOD to appear. The blue screen said that Nvidia has been the cause of the problem, but even after an attempt to safe mode to remove Nvidia and reboot, the problem still persists then the first time worse. We have tried many things and nothing seems to return the computer to normal.

Windows Vista Edition Home Premium (Service Pack 2)
Hewlett-Packard (HP Pavilion dv9700 Notebook PC)
Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz 2.00 GHz
4.00 GB (RAM RAM)
64-bit operating system

BSOD message:

Technical information:

STOP: 0 x 00000116 (0xFFFFFA80074D6010, 0x000000000000000D, 0xFFFFFA6002C18CC0, 0 x 0000000000000000 (16 zeros after x)) (15 zeros between x and D)

nvlddmkm.sys - address FFFFFA6002C18CC0 base at FFFFFA6002C0F000, DateStamp 473183a 1

The sound skips and repeats on connection, the graphics are of different colors and form rectangles, the internet connection is not found and on starting any program, it crashes immediately. If anyone can help I would appreciate it a lot. If more info is needed, let me know!

Hello

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

Those who should help as a sort of preparatory work.

=============================================

Have you updated your screen/video or other great drivers latetly - check in Control Panel - updated Windows Update of
see if a driver has been loaded it. Use this generic utility below and when you get to the section of the driver
Use the methods in the next message, and then go back to the resolution of the problems according to the needs.

Also check with system Maker Support and Nvidia because it might be problems known - also check in their forums.

BCCodeL: 116 0 x 00000116

Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to return the display
driver and recover from a time-out has failed.

--------------------------------------------------------------------------------

The inclusion of 116 error in the troubleshooting code is only coincidence and has no specific meaning (other than)
pilot caused bluescreens occur with some frequency).

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

The laptop keyboard malfunction

Hi, the keyboard on my laptop is defective. The screen swivels on its on. The cursor move erradically and letters jumping around.

My wife comes to claim that the laptop works with a USB keboard, jump around, but the actual laptop keyboard is defective. I have re-installed Windows Vista with data backup and it has not fixed the problem.

What remedy? Can I completely erase the hard drive and reinstall without data backup...

On Friday, January 21, 2011 20:28:16 + 0000, d5332 wrote:

Hi, the keyboard on my laptop is defective. The screen swivels on its on.

The ability to rotate the screen image is a characteristic of your video
card, to help work with instructors who turn to the portrait
orientation. Almost certainly you accidentally press on Ctrl-Alt, and
an arrow key.
Rotate using these keys.

The cursor move erradically and letters jumping around.

My wife comes to claim that the laptop works with a USB keboard, jump around, but the actual laptop keyboard is defective. I have re-installed Windows Vista with data backup and it has not fixed the problem.

What remedy? Can I completely erase the hard drive and reinstall without data backup...

No!

I can't be sure, but very likely problem is not the keyboard
malfunctions, but rather that she brushes accidentally his hand
against the touchpad while typing.

Ken Blake (MS-MVP)

Error on the packaging: error 103: application.qnx is an unexpected element/attribute

Hi all

A week ago, I sent my application the second time signed, now I do this third time because accidentally I sent the request with the word "debug" on the icon.

I'm trying to do anything with the process of signing using the excellent How - to's here here , but unfortunately I'm stuck on the first step, when I try to package I have strange error "error 103: application.qnx is an unexpected element/attribute" on the file my - app.xml.

What is c? What should do?

Thank you very much

Because you have qnx tag in the file. Remove and everything in it - this tag and content belongs to blackberry - tablet.xml. Validator of Adobe (which gives you an error) air does not recognize as a first class citizen, then put all of the additional tags in the additional xml file.

Windows 7 product key used accidentally twice

Hello

When installing Windows 7 on my laptop, I accidentally used the product key and the media of Windows 7 for PC to another Member of the family. Oddly, Windows on the laptop and is successfully activated remained activated on the first PC. In any case, I now reinstalled Windows 7 on the laptop using the product key and the media that accompanies it. My question is, Microsoft, after a period of time, will disable Windows 7 on the first PC if they detect that I used the product key on another computer (even if it is only in use on the first computer again now)?

Thanks for any help,
Dan

On the first PC, I used the 'Change product key' option to re - enter the original product key and activate Windows again

On the laptop I reinstalled from the brackets provided with the laptop (no need activation).

Should - this to say that the first PC will continue to operate without the risk of turning off now?

Well, they use their product keys properly attributed and are activated with them - that logic dictates that you should be fine now.

This does not mean that sometime in the future, you might have another issue that requires him to become disabled, but as long as all the paperwork and the numbers are a match - the worst case are a phone call to straighten.

"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive. Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Why he says this? And what can I do about it if anything? I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing. So I don't know what is happening or how to fix it. Please help me!

Hi Carla,.

Please go to the Microsoft Community Forums.

After the description of the question, I understand that you can not use the mouse on the computer wireless.

Let me go ahead and help you to question

What is the brand and model of the mouse?

Here are some ways you can follow to resolve the problem:

Method 1:

Try to connect to other USB port and verify.

Method 2:

I suggest for the link and follow the steps in the article:

Troubleshoot a wireless mouse that does not correctly

http://support.Microsoft.com/kb/321122#appliesTo

Method 3:

Remove and reinstall all USB controllers

Follow these steps:

a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

b. click on the hardware tab.

c. click the Device Manager button.

d. expand Bus USB controllers.

e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

f. restart the computer and reinstall the USB controllers.

g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

As an attribute of transition

I accidentally applied the trigger of default transition. And he did not notice before making editing much more.
I thought, my luck, there now remove attribute to solve my problem.
But Adobe is Adobe: a transition is not an attribute!
My question: should we wait until 2026 to see that mande?

Remove attribute isn't for effects for transitions.

BTW its not new it used to qualify to remove the effects.

Feature request/Bug Report Form

User error needs help correction-> repeatable Tag on the attribute custom section

Okay, I v.6111. Today, I put manually the tag supplier_eq_create on all the existing attributes in our sections for suppliers can add them when we send the EQS. Unfortuately, I accidentally clicked on the reproducible tag instead of Supplier_EQ_Create in some cases in our environment Export/setting in scene. When I try to remove its repeatable label, I get the error that says "reproducible State of the line can be changed after the outbreak of the line"... we did not really use the reproducible feature of the tag. I need to know how I can remove this tag with the attributes of active due to human error before importing it to PROD. The forum can help me?
Best, Beckie

Hi Beckie,

As long as you are sure that nobody use it you can remove this tag with a database script.

As with all scripts, make sure that you back up your data.

With the following script, you can find the lines that contain the reproducible tag of a particular section model
```
select rowTemplate.* from eaSectionDynamicTagJoins rowTTagjoin
inner join commonEARowTemplate rowTemplate on rowTemplate.pkid = rowTTagjoin.fkEAS
inner join commonLookups tag on tag.pkid = rowTTagjoin.fkTag
inner join commonEASectionTemplate sectionTemplate on sectionTemplate.pkid = rowTemplate.fkSectionTemplate
where tag.Name = 'Repeatable' and langID = 0 and Category = 'EASRowDynamicTag'
and sectionTemplate.id = '';
```
Tags are related to patterns of row of section customized using the eaSectionDynamicTagJoins table.

You can remove the tag of a specific line by using the following script
```
delete from eaSectionDynamicTagJoins
where fkEAS = '';
```
I hope this helps. Let me know if you have any questions,

Dmitriy

Where can I find a list of complete tag attributes

Where can I find a list of complete tag attributes. I found the tag quick reference page but it does not all modifiers that you can use with some tags. An example I used {tag_body, 200} in the ads to limit the number of characters to display. I don't know where I found this. I could find other attributes like that. Some areas are booking tags, the blog tags, the tags of the shop.

Hello

It's good as it seems that this attribute has been stopped article quick reference by accident.

However, this article should list all the tag refers to less than accidentally left. I'm going to our team of documentation updates accordingly.

Reference tags: http://kb.worldsecuresystems.com/134/bc_1342.html

Module reference: http://kb.worldsecuresystems.com/134/bc_1345.html

Kind regards

-Sidney

& quot; display: block & quot; Dreamweaver 8 accidents
As soon as I add the attribute "block" crashes of Dreamweaver 8. Here is the code:
HTML:
 < a href = 'Development' > development < /a > 
 < a href = "Absorption" > Multi-Path Absorption < /a > 
 < a href = "Content" > contents < /a > 

CSS:
a {}
Police-family: Geneva, Arial, Helvetica, without serif.
color: #424242;
text-decoration: none;
background-color: #F4F4F4;
padding: 5px;
Width: 170px;
display: block;
}

If I just put the code above in a document in itself, it works very well. When I add the block to my main doc Dreamweaver attrib hangs on the spot.
It passes the W3 validation. I uninstalled and re-installed Dreamweaver.
Here is the online test page: http://www.ultimate-c.com/test.html
Very strange. Anyone had this happen?
DW 8.0.2 flashes even when I do that. No accidents, no complaints, it's just
is what I order like a good obedient application.

--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
==================

"Brambley" wrote in message
News:el1tfl$N4$1@forums. Macromedia.com...
> Try this
> http://www.ultimate-c.com/test/test-3.html
> Save the file and open it in DW. On mine, the program starts immediately
> regards
> strange. Sluggish. If you try to change the named 'anchor' text, to
> anything
> besides all in code view DW crashes. If you remove the css display: block
> then
> DW starts to act normally.
> Let me know what you find please.
>

How to paste properly attributes for crops?

Hello, I have problems with the function of paste attributes. Below you can see how I cropped these images. I want to paste in another clip culture settings, so that they have identical cropping. The two clips are of the same size - they are just registered my iPhone screen captures.

In the another screenshot, you'll see what happens when I copy this element, then to paste attributes and select "crop." In the screenshot below, you will see how looks the handlebar of the Blue Harvest. I tried to adjust the trim, but all this seems to do is to take away the cropping.

Any help is appreciated!

Normally, you copy the required item.

Then use Paste attributes:

This is evident:

Select the required attributes and glue.

If that's what you already do, then check them in Spacial parameters are consistent:

Al

attributes accidentally malfunctioning in W7

Similar Questions

Maybe you are looking for