Attributes of the image tags accessibility?

Similar Questions

• Selection of Inspection based on the attributes of the image

  I'm processing the stored images and must choose an inspection based on attributes of the image as the name and the size (length in pixels).

  Currently, I do all this in only one inspection, but since I'm inspecting several product families (differentiated my name of the image), and several sizes for each family, my inspection algorithm becomes very difficult to manage, so I would like to create a supervisor application that can determine which family of products and the size I'm looking, and then run the corresponding inspection and then do some data sharing and saving the image and loop back to the next image.

  I played with the ability to select Inspection in VBAI, but since I'm not on the material or communications to select the inspection, I can't seem to find a viable solution, ideally, I would like to go through the step of configuration once, then jump to the state diagram for the treatment of the initial image (determine the product family and size) then go to 'Select Inspection' and run the corresponding inspection.  This is where I'm stuck, IE., how to trigger the jump to select inspection in the state diagram?  Some people I have consulted so far say: you can't do that!  Anyone beg to differ?

  If I can't access select Inspection of state diagram, then plan B is to use the LabView API and make the principal contractor in LabView, it is where I need to go?

  Thank you

  Eric

  If you have the indicator Activate Product select enabled, select product State will run automatically after the State inspect goes to terminal completion. You can use a VI select LabVIEW Run in the State of product for your logic and move to the next round to load. With Vision Builder AI 2010, this path can be considered to be the real path to the inspection (inspection select dynamically run then) so you do not preconfigure a lookup table of inspections to run with values (it was the previous way of doing and it does not allow to dynamically load new inspections that weren't in the preconfigured table). Don't know how it works with your system, but using the LabVIEW API is an alternative that would give you better control and. You might even have a stage run a LV VI specify the control to use on an iteration in Prioduct selection state and inspection of logging of data/images to use later, but due to the opening and closing of the inspections overload new inspections may make having an inspection separate for logging of common data/images does not not your needs timing.

  Hope this helps,

  Brad

• An error occurred applying attributes to the file. Access is denied?

  Hello

  I use Windows 7. I reinstall my Windows 7 and since then, most of my file become encrypted (Green shows in Explorer).

  I came across a strange behavior where I am not able to use or to decrypt files. I dint knew the encryption.

  I am the administrator on my computer running Windows 7. I get the following error
  --------
  An error occurred applying attributes to the file.
  
  Access is denied.
  --------

  I have no key encryption nor do I created everything.

  I tried the following:
  When I right click on the file > properties > go to advance > uncheck the encryption > apply changes > continue (user account control) > I get this...

  "An error occurred applying attributes to the file:

  C:\Program Files\Windows Collaboration

  Access is denied.

  Ignore. Ignore everything. Try again. Cancel. »

  It is a small very annoying problem that I need to have go further, any help would be appreciated!

  Points to note:

  Safe MODE does not help.
  I am logged on as administrator, what makes it more frustrating.

  I do not know of the all other folders that Act up like this.

  Please let me know what happens! THESE FILES ARE VERY IMPORTANT

  Hello

  1. what security software is installed on the computer?

  2. what version of windows 7 is installed on the computer?

  3. of what exact file you try to remove the encryption?

  4. have you installed windows on the C partition or another partition?

  Method 1.

  To resolve this issue, give the system security principal of full control on the System Volume Information folder.

  NOTE: The System Volume Information folder is a hidden operating system folder. To display the folder in Windows Explorer, follow these steps:

  1. in the Tools menu, click Folder Options.

  2. on the view tab, clear the Hide protected operating system files check box.

  Follow the steps in this article and give full control permission to the folder. Appropriating a file or a folder: http://technet.microsoft.com/en-us/library/cc753659.aspx

  Method 2.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  For more information: the file must be decrypted by the user who encrypted the file. The files are encrypted using the Encrypting File System (EFS) are accessible only to the person who encrypted the file, regardless of the other permissions on the file.

  I suggest you to visit these links for more information:

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://Windows.Microsoft.com/en-us/Windows7/use-a-smart-card-for-file-encryption

  http://Windows.Microsoft.com/en-us/Windows7/what-is-encrypting-file-system-EFS

  I hope this helps.

• 'Value not completed for attribute "in the XML tag". (SBL-UIF-00265) »

  To get this message when I change a Web layout for a display in Siebel tools 7.8.2 "unfinished value for the attribute"in the XML tag". (SBL-UIF-00265) «... Anyone has an idea why I get this message?

  Hello

  Check the webtemplate to view file. The WT file may contain a double quote in some tags. Maybe it's the cause of the error. U have changed the SWT file by accident. Refer to ID 1280569.1 Web of Support of Oracle for more information.

  Kind regards
  Joseph

• Validation of attribute of the CFQUERY tag error

  I have a CF app that works well on a shared hosting. I have now a VPS running the version of CF 9. When I try to use it on the VPS, I get the following error:

  Validation of attribute of the CFQUERY tag error.

  The value of the datasource attribute, which is currently ", is not valid.

  The data source is defined in application.cfc and again works very well in the shared environment.

  The only differences is the shared is running on Windows, and the VPS is Linux. In addition, Windows running the 9,0,1,274733 version and Linux is 9,0,0,251028

  Any help would be greatly appreciated.

  If the file in question is really called "application.cfc" then that's your problem.  This is supposed to be 'Application.cfc '.

  --

  Adam

• the image tag select vs tag image through the function

  Hello
  
  Why is this work:
  

   case when function1( p1, p2 ) = 'N' 
      then
        '<img src="#APP_IMAGES#1.jpg" title="1">'
    else
      '<img src="#APP_IMAGES#2.jpg" title="1">'
    end nv 

  and it is not:
  

  function2( p1, p2 ) images 

  Function1 returns o or N, function2 returns the same img tag as in 'box when' (< img src = "" #APP_IMAGES #1.jpg "title ="1">"). The first statement shows the correct image, that the 2nd way does not show the image (Red Cross).
  
  The report columns are "Standard report column", when I change that to "Display as text", I see the good img tag.
  
  
  Anyone know why it does not work?
  
  Published by: garcol on February 22, 2013 10:48

  This is because SQL is parsed in the first place, as well as chains of substitution. The results were not analysed. If you want to replace in your procedure, you can always pass a string as a parameter substition and then analyze the text returned to be yourself.

• Is there a quick way to navigate between the image tags?

  I use the scroll at the bottom of the timeline bar to go to different periods. It's slow I have thousands of images. I wonder if there is a similar interface like window Actions of the labels on the timeline. I mean you can see all the scripts in the left pane and be able to go there directly by clicking on anyone on the list. I would be fine if you can see all your labels in a menu and click here to go there directly (I think that). Maybe I can put a dummy script in different label, and then I can use the Action window of to go.

  Is there a better way?

  Thank you!

  The movie Explorer window. At the top is a set of marked options Show: select the fifth button, spectacle frames and layers. Scroll to the bottom of the window and you should see a marked section of the markers. You can double-click any one of these elements and scrolls the timeline to this brand of the image.

• change the image tag to have the applied css3 transition effect

  Hello guys

  I've added a transition effect css3 buttons (room bathroom kitchen mosaic, floor) logo on my homepage http://ceramic-planet2.BusinessCatalyst.com/home

  I wish now to do the same for the small product image so the price past the orange to blue http://ceramic-planet2.BusinessCatalyst.com/bathroom-tiles

  the small product image is tag_smallimage. is it possible to change this tag with css3 rules? If Yes, then it's a matter of how I am able to have 2 different images related to the link small image? for the moment that a single image is related, and I need 2 so that they exchange overview?

  If the change of the tag_smallimage is not the answer can I access each product separately or change the small product.html in dreamweaver to get the effect? again, I can see how it's just a model and each product will have its own set of images?

  difficult, I know

  Dave

  Hi Dave,.

  You must use the custom product field if you need to add another image available to small products. You will find 4 custom inside product details fields and corresponding tags in the layout are {tag_custom1}, {tag_custom2} and so on.

  See you soon,.

  -mario

• How to get the image tag

  IAM create small Animation in 10 pictures. 1 frame lable called 'Start', frame label name is 'end '. Button click on how to get the current frame label name.

  var frameObj:Object = {};

  frameObj [1] = "start";

  frameObj [this ._totalframes] = "end";

  etc.

• Added a Zoom Plugin jQuery and needing help to add attributes to the evolution of the poplet images.

  Hey BC community, I looking for a little help with some jQuery / javascript. Overall, I have a plugin to zoom like forcing me to add a data attribute to the image I want to add the zoom effect on. This isn't a problem, but I poplet images that I've adjusted to fill again the big picture. html() rather than the default light box.  The Zoom plugin I use requires a data attribute to be added to all the images I want to have the ability to zoom attached to. I wrote jQuery that adds the attribute data on the original image which is to fill the big image container, but whenever I change the following poplet image, I lose the zoom effect. I hope that makes sense... lol I'm still a javascript / jquery newby.

  Here is the work currently underway. Figure which may help understand the situation better. Here is the site

  I just want to add zoom to any poplet effect is enabled by adding the attribute data and the new file extension required for the expansion of the resolution. Again, please excuse the bad jQuery / javascript, I'm still learning!

  Here's my jQuery / Javascript.

  New features of Poplet

  /*===================================================*/

  function poplet (e) {}

  e.preventDefault ();

  var imgURL = $(this) .attr ('href');

  $('#largeimage').html ("< img src ="' + imgURL + ' "> '");

  }

  /*=======================================

  MAGNIFY

  =======================================*/

  $(document) .ready (function () {}

  var addedAttr = "data-magnify-src";

  var addedExtension = '-large.jpg ";

  var originalExtension is $('.productLarge #largeimage > img') .attr ('src').slice(0,-4);.

  var combinedExtension = originalExtension + addedExtension;

  $('.productLarge_#largeimage_>_img').attr (addedAttr, combinedExtension);

  });

  $(function() {})

  Poplets

  $('.productPopletsItem_a').removeAttr ('onclick release);

  $('body').on (' click on ', '.productPopletsItem a', poplet);

  });

  Yes I fixed it, got help from some other forums. Thank you!

• Image tag with the XML tag

  Hi all

  I want to mark all my images embedded in a CS6 document with an XML tag. I use CS6 on Windows with JavaScript. Any advice would be appreciated. Thank you.

  Rick

  OK, it seems I have to add the element to the structure, and then use "tagging" to apply the item to my image.

  // Get the selected image.
  var image = app.selection[0].getElements()[0];
  // Get the Story element.
  var root = doc.xmlElements.item(0);
  var storyElem = root.xmlElements.item(0);
  // Add the "Image" element to the Story element.
  var imageElem = storyElem.xmlElements.add ("Image");
  // Tag the selected image with the Image tag.
  image.markup (imageElem);
  

• XMLNS attribute in the tag wrong

  Hello!
  
  This XML has been accepted with the xmlns attribute in the wrong tag, but I have to extract its value in any way. How can I do?
  

    <NFe>
      <infNFe Id="NFe123" versao="2.00" xmlns="http://www.portalfiscal.inf.br/nfe">
      <ide>
        <cUF>00</cUF>
      </ide>
    </infNFe>
  </NFe>

  Thank you!
  Luciana

  You will need to write it as one 'or' but it will be much less efficeint except if you process documents one at a time

  SQL> with MY_XML_SAMPLE  as
    2  (
    3    select XMLTYPE('
    4  
    5      
    6      
    7        00
    8      
    9    
   10  ') as OBJECT_VALUE from dual
   11  )
   12  select t.*
   13    from MY_XML_SAMPLE,
   14         XMLTable
   15         (
   16            xmlnamespaces
   17            (
   18              'http://www.portalfiscal.inf.br/nfe' as "nfe"
   19            ),
   20            '/NFe/nfe:infNFe | /nfe:NFe/nfe:infNFe'
   21            passing OBJECT_VALUE
   22            columns
   23            ID      VARCHAR2(32)   path '@Id',
   24            VERSION NUMBER         path '@versao',
   25            CUF     VARCHAR2(2)    path 'nfe:ide/nfe:cUF'
   26         ) t
   27  /
  
  ID                                  VERSION CU
  -------------------------------- ---------- --
  NFe123                                    2 00
  
  SQL> with MY_XML_SAMPLE  as
    2  (
    3    select XMLTYPE('
    4  
    5      
    6      
    7        00
    8      
    9    
   10  ') as OBJECT_VALUE from dual
   11  )
   12  select t.*
   13    from MY_XML_SAMPLE,
   14         XMLTable
   15         (
   16            xmlnamespaces
   17            (
   18              'http://www.portalfiscal.inf.br/nfe' as "nfe"
   19            ),
   20            '/NFe/nfe:infNFe | /nfe:NFe/nfe:infNFe'
   21            passing OBJECT_VALUE
   22            columns
   23            ID      VARCHAR2(32)   path '@Id',
   24            VERSION NUMBER         path '@versao',
   25            CUF     VARCHAR2(2)    path 'nfe:ide/nfe:cUF'
   26         ) t
   27  /
  
  ID                                  VERSION CU
  -------------------------------- ---------- --
  NFe123                                    2 00
  
  SQL>
  

  Just checked that it works in 10.2.0.4.0 so

  Published by: mdrake on December 3, 2010 08:02

• Customized by default for the img tag

  Hi all

  I've always used HomeSite for HTML coding in the past, I like the interface and the direct control of the HTML code, however, I'm experimenting with the use of Dreamweaver. While the coding of templates for our email marketing solution [link removed by Moderator] I noticed that when you import images, Dreamweaver is not automatically add the border = '0', the height or width attributes. Y at - control to have these added by default?

  Look forward to your responses.

  Thank you very much

  Pete O'Connell

  PeteOConnell wrote:

  When you import images, Dreamweaver does not automatically add border = "0", the height or width attributes. Y at - control to have these added by default?

  Dreamweaver adds height and width automatically if it can detect the dimensions of the image. However, you have reason it adds not the attribute border, because it is deprecated in HTML.

  If you want to change the default behavior, you can do so by editing the JavaScript file that inserts images. In Dreamweaver CS5, this is C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\Objects\Common\Image.js (Windows) or Applications/Adobe/Adobe Dreamweaver CS5/configuration/Objects/Common/Image.js.

  Modifying the files in the configuration folder is relatively simple, if you're careful and you know what you're doing. Make a backup in case you're wrong.

  45-49 lines insert the image tag. They look like this:

    if (imgDim){
      rtnStr= '';
    }else{
      rtnStr= '';
    }
  

  Add border = '0', change them like this:

    if (imgDim){
      rtnStr= '';
    }else{
      rtnStr= '';
    }
  

  As you can see, rtnStr in the first half of the conditional statement adds the width and height if they are detected. You can add them to rtnStr in the else clause if necessary.

• Update of the Image metadata in Image file

  Hi all

  I'm trying to update the value of image metadata such as title, subject, Description of the Image, comments, author, etc. through Java code but have failed to do.

  I tried a lot of code available online but that you have failed.

  However, I was able to read the values of metadata and print, but the writing is a problem.

  Could someone please help me with the part code writing or updating the metadata values in an Image.

  Precise scenario is - I have many images I want to compress to reduce the disk space used. But the compression code generates an image in which all the metadata (attributes of the image), the values are lost, who are important to me. So find a code by which I can copy read the metadata of the values of the original image and write it to the compressed image.

  Kind regards

  Sanket

  Hi all

  Thanks for your help and support.

  However, I found a solution to my problem.

  Here is the link for the same thing:

  http://www.programcreek.com/java-api-examples/index.php?source_dir=Augendiagnose-master/AugendiagnoseIdea/augendiagnoseLib/src/main/java/de/jeisfeld/augendiagnoselib/util/imagefile/JpegMetadataUtil.java

  In this, I removed the part of code that is related to android and my task was accomplished.

  In particular, those that are not needed are under classes. Just their comment and make the appropriate changes in the code to resolve the error and everything works fine.

  Import android.media.ExifInterface;

  Import android.util.Log;

  Import de.jeisfeld.augendiagnoselib.Application;

  Import de.jeisfeld.augendiagnoselib.R;

  Import de.jeisfeld.augendiagnoselib.util.PreferenceUtil;

  Kind regards

  Sanket

• Conditions with image tag

  Should be simple enough here to get an answer on.

  Try to read a symbol on the stage when you press will play this symbol and stop on an image tag.

  When you enter new time this symbol of the image tag, reverse.

  Define a toggle to read or suspend the symbol timeline

  If (sym.getSymbol("close_btn").isPlaying ()) {}

  sym.getSymbol("close_btn").stop ();

  } else {}

  sym.getSymbol("close_btn").play ();

  }

  Make a variable in compositionReady like that

  inversion = 0;

  In the stop click saying

  Reverse = 1;

  Put this if statement above the stop click

  if(Reverse == 1) {}

  play the reverse animation

  inversion = 0;

  }

  I hope this helps