Audio capture for purpose of demonstration...

One of my developers a problem reproducible randomly with check-in demo mode in captivate. Usually happens in Visual Studio 2008, the event record set, and all recording works perfectly, record audio, where the last 5% or more are cut completely at the end of the event.

I am at a loss to explain it, or find a solution for it, as there seems to be no specific trigger for this. It works sometimes, others you end up reshooting the last slides 1-2. Not huge, but a bit boring pain undermines a quarter of an hour with each roll forward.

Doesn't seem not serious if something is clicked after audio suspends, or you stop recording through the end key or clicking captivate in the taskbar.

Works perfectly in captivate 3 with the exception of the trim bug, I found a fix for, you should look, because it is so perfectly integrated, that it's almost automatic. Record in separate files in this case would produce an excessive amount of work, is no longer justifiable. The main reason I went with captivate is he gave me a my developer tool didn't need to learn that they could do whatever they had to in it with three clicks on the button. I thought go to audition or even a tape recorder integrated to accomplish the same thing, but I found that it added too much complication to the process.

Solution:

Captivate 3 has apparently no method to check in the form of active data, so, when you are finished recording, it simply clips its judgment at the previous recordable event. An easy way to ensure that this does not happen is to click on save button in the application that you save before hitting the end (end of record).

Tags: Adobe Captivate

Similar Questions

  • TRV27 DCR how can I turn off the built in mic? I use other audio entries for broadcast on the Web

    I use two TRV27s DCR to capture video live for broadcast on the Web, but I use another audio input for broadcasting on the Internet... ambient discussions are picked up by the microphones of the TRV27... How can I turn off?

    Sony Handycam do not have a menu option to allow the microphone to be turned on or off. There are two possible solutions for this:

  • audio capture

    I do not search this Board first, but could not find an adequate response, which would be a good hardware DAQ to use to capture a signal from an audio amplifier for the measurement of noise and distortion. I'm building an amp for me so did not not a budget of manufactured goods. I was thinking about using a HP frequency generator to capture a very clean waveform and then compare this after that amplification using Labview built in functions. I have Labview 8.6 SE

    Thank you!

    Alan

    I have not read through each link.  I just found with a quick Google search and scanned them quickly.

    I don't see your response as sarcastic at all.  I know all too well how ugly hardware audio consumer PC.  However, I think it might be quite appropriate to digitize a signal _error_, since the required loyalty is very less than that required for the measurement of the signals of interest directly.  The method I mentioned has the additional advantage of being insensitive to the distortion of the signal from the source, so you can be able to use audio PC in order to predict that, as well.

    Chris

  • Audio capture lost "what you hear" of conexant

    I have a laptop HP Pavilion DV2278ea under Vista 32 bit, and have all the updates of the BONE apart from those announced in the past weeks. I recently updated the software for the integrated sound card Conexant High Definition for 08 August last version 4.36.7.60 C. Everything seemed fine until I came to do an audio capture of a stream on the internet using Roxio. Only one capture device listed was the microphone - it used to be the one who said Conexant Audio "what hear it" to capture anything the speakers. Review of the sounds in the control panel the only recording device is the microphone. Sound works very well in both internal and external speakers. I tried rolling back the drivers but its still the same. Any help would be greatly appreciated. Thank you very much.

    OK, that had me crazy for the last few days, but I found the solution:

    Selections from the input Source to record Windows Vista for recording audio streaming, media players or anything you can hear coming through your speakers are hidden from view and people disabled by default. (I'm sorry - but why!?)   )

    If your audio card/system support recording streaming audio input Source selections such as: stereo mix, What U Hear, Wave Out Mix, vague or a similar selection, here what you need to do to activate for the record:

    Right click on your speaker icon in the system tray, (near the clock), select "recording devices".

    In the acoustic window that opens up, near the top, select the TAB "recording".

    Move your cursor where the devices are displayed.

    Right-click in the empty white box and select "show disabled devices".

    Support, new selections will appear such as: stereo mix, What U Hear, etc. Click right on "Stereo Mix", "What U Hear" or similar and select 'enable '.

    Right-click on the same new item and select "Set as default device". Click OK.

    Now in the Options of the recorder in the "Input Source" box, you should have the "Stereo Mix", "What U Hear" or similar source available to select for recording streaming, etc.

    (You can also activate other selections hidden such as Microphone, Line In, etc, if they are not already displayed).

  • How to change the audio output for the metronome

    Hello

    I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

    I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

    I tried to follow the instructions of the Manual:

    Change the audio output for the sound of the metronome

    1. Choose the MainStage > Preferences > General.
    2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

    PROBLEM

    1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

    2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

    3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

    Rant on (its been a long day)

    Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

    Thanks in advance for all advice and my apologies for my frustration. JM

    To access the output audio, you need an audio interface with several outputs.

  • Find the Audio driver for HP dc7600 convertible minitowers PC for Win7

    Dear all Member,

    I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.

    Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.

    You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?

    Thank you very much.

    Chinh_Ng.

    Hello:

    For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.

    Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

    I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.

    I used the one on the link below.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3459240 & prodNameId = 3459243 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-75954-1

  • I need driver audio WinXP for Pavillion DV6599ee

    Hello.

    I installed WinXP on my Pavillion DV6599ee but I can not correct audio driver for this laptop.

    Can someone please give me a link to the correct audio driver for WinXP for Pavillion DV6599ee?

    Thank you.

    Thanks CherylG. I'll follow your instructions and let you know how it went.

    Kind regards.

  • IDT audio driver for Windows XP

    Hello

    I have a DV7-1050ef downgraded to XP. I know that HP does not support Windows XP more.

    Anyone found yet an IDT audio driver for Windows XP? I have already tried many, none of them worked.

    I also installed the UAA kb888111.exe driver. Do I need to install anything else before the driver IDT?

    Thank you!

    You might try this one:

    http://www.VersionTracker.com/dyn/moreinfo/win/196800

    I've heard it works, but never tried it myself.

  • Satellite T135-S1309 - audio driver for Windows XP

    I have a Satellite T135-S1309 and I can't find the audio driver for windows XP in toshiba Web site or on the internet.

    Please if anyone can help me I will be grateful.

    Hi, mate

    can you post what's installed on your laptop card? Realtek? You can check this in the Device Manager

  • Audio drivers for reformatted HP Pavilion dv6700 with Windows 7 OS

    It is my first time please post here, so be nice, people...

    In any case, the problem started when I re-installed a Windows 7 operating system (32-bit, I think) on my HP Pavilion dv6700 with product number KN947UA #ABA on Monday. I could download all the usual stuff - Cleaner Windows, VLC Player, etc - but when it came to install a sound driver, the device will be not simply to accept the installation of the program, I downloaded.

    I remember well, I have this problem when I started to install Windows 7 on my laptop; I was able to download and install a RealTek program - I didn't know what version it was, but he just ran without a hitch on the laptop.

    I know I'm not the only one who has this problem here; Please believe me when I say that I already tried some two or three links here that are supposed to install the required audio driver for a Windows 7 compatible HP Pavilion dv6700, but, to my regret, no just programs will not be recognized by my camera. I do not foresee even write a post here, but it seemed to have no choice in the matter more - wrong I need help.

    I would be very grateful for any suggestion, you guys can throw my way. Thank you!

    OK... you're indeed a Realtek HD audio chip to your laptop.

    Accept the agreement and download the first driver listed.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  • Audio drivers for Vista 64 bit for my Satellite Pro P100 PSPA4E

    Hello

    I'm looking for audio drivers for the PSPA4E. The reason that I updated to VISTA 64-bit. and I can only find the 32-bit driver on the Toshiba site.

    Thank you very much for reading this.

    Please don't be crazy on me, but why put just PSPA4E as description of the laptop model?
    If you see the Toshiba download page this info can be useful right on step 4 to choose the right laptop model.

    In any way, if you can't find it on the support page of Toshiba which means your laptop model is not supported for 64-bit operating system. Identify the sound card and try to find it on the manufacturers support page.

  • Where to find the audio drivers for HP550?

    I got a new hp550 and I put on my Windows XP, but I have no audio drivers for it. Where to download?

    The button 'Support & drivers' at the top of this page, you will reach your drivers > > > ICI

    You must first install Intel Chipset and reboot before other drivers. For audio, install the Microsoft UAA driver and restart the computer before the Audio driver... together, both appear on the page.

  • Why no audio drivers for Windows 10?

    The Toshiba site has a banner on their website announcing that Windows 10 is here

    Why are they advertising a product that they have no audio drivers for?

    I have a Windows 8.1 machine which is located in more than a year, and yet I tells me that they do not have audio drivers available for Windows 10

    What model of laptop do you have?

  • 4.8.0.0Update1214 driver Conexant Audio Driver for Windows Vista

    Who has already install vista 64-bit can tell me what this driver for vista 64-bit?

    Update driver Conexant Audio Driver for Windows Vista 4.8.0.0 1214

    I put t know exactly if it of true but some P100 camera supports the audio chip Conexant CX20551-22.
    If you are looking for the Vista 64 bit driver you must search for the driver that supports this chip.

  • HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

    Can someone help me find the drivers of Beats Audio of this laptop.

    HP PAVILION DV6 - 7010eo B1K68EA BEATS AUDIO DRIVERS FOR WINDOWS 8 64-bit

    If you please give me a link where I can download that.

    [Personal information]

    / Arne1963.

    Hello

    If you haven't already done so, install the Chipset driver at the following link.

    Chipset Driver - Windows 8.

    Once completed, restart the laptop.

    When windows has reloaded, download and install the IDT HD Audio driver on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

    Kind regards

    DP - K

Maybe you are looking for

  • How can I restart the Apple TV Remote (4th Gen)

    Hi all I have a relatively new Apple TV (4th Gen) and tonight after a few weeks of work perfectly, the remote control slide to the right and in other directions only intermittently. I read up before you call Apple and it seems to me that it is a new

  • PsExec.exe Runing on labview2012 with Exec.vi system

    I have problem on this, it will signal erroe to run PsExec.exe using the 'Exec.vi system'. It works well on the Labview8.6 version, but has problems on Labview2012. Could someone help?

  • Cannot open applications. All open them with Notepad

    Most of my programs on windows xp opens as a Notepad.  I tried to do a system restore, but a Notepad window appears.  How can I get my computer back to normal?

  • custom like foursquare title bar

    I've been looking around but have not yet found an answer to this. is it possible to create a title bar custom like foursquare in their app bb10? If Yes, where can I find documentation about it? http://www.Engadget.com/2012/09/25/rim-shows-off-native

  • How to copy a document from USB to the computer?

    I am trying to copy/move an excel document, of a drive from my computer, but when I remove the USB port, I'm unable to access the document.