AirPlay guard swinging back on iPhone

I do not have wifi, but it worked before. I plugged my phone the business center to my apartment complex and is where it seems to go haywire. Now, it does not connect. WiFi on but not connected, it's Bluetooth. Still no connection. AirPlay on my phone will automatically switch to iPhone AppleTV. What I am doing wrong?

Perhaps you are setting up the iPhone as a personal hotspot so it and the Apple TV can send data back without needing to connect to a router/wifi access point?

TT2

Tags: Apple TV

Similar Questions

  • Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the screen. How can I stop this?

    Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the Web page. How can I stop this?

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • iTunes could not back up iPhone because iPhone is disconnected

    Hi Apple,

    When I tried to backup my iPhone to my iTunes, it showed this message "iTunes could not back up iPhone because iPhone is disconnected" I should how to solve this problem?

    Hello yipwh,

    Thank you for using communities Support from Apple!

    I understand that you were not able to back up your iPhone with iTunes recently. We know that situations of this kind can be frustrating, but we are here to help.

    To begin troubleshooting, I suggest to read and work through the steps to suggest described in the following article.

    If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

    See you soon!

  • Whenever I'm on the laptop I did scroll down to read something, as soon as I move Sideways moves up/down also by typing the cursor guard jumping back a few letters in the same line

    Original title: keyboard

    Whenever I'm on the laptop I scroll to the bottom to read something, as soon as I move laterally the screen moves up/face down as by typing the cursor guard jumping back a few letters in the same line, obviously I don't am not literate PC please help me because it makes me crazy! Thanks to all its much appreciated!

    Please see the bulletin:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/keyboard-issues-with-multiple-character-keys-Don ' t/2ad254e1-46e6-40f2-b082-f433f4c9ce0b

    In all likelihood, your laptop keyboard is a failure.

  • I can't text people with iphones after swinging back on android

    Hi, half the people I text with have iphones and I can't receive text messages from phone calls

    I went from 5 c to Samsung Note5 iPhone

    I was getting texts from users of the iPhone on my note3 without any problem.

    IPhone News: it has a capacity of 12.4 GB. Version 9.3.1 (13E238)

    Note 5 info: Software Version N920PVPU2BPC3. Design of hardware Version N920P.04 is Galaxzy Note5. Model Nuimber is SM-N920 Android Version 6.0.1

    Operating system is Android 5.11 Lollipop, Touchwiz Processer is Exynos 7420 octa-core (2.1 GHz quad + 1.5 GHz quad) 64-bit, 14nm

    Storage capacity is 32 or 64 GB, EGGS not developable 2.0

    My Note3 was stolen and I had to turn my iphone 5 c that I have yet to have a phone at all because I wasn't able to replace it with another Note at a time. When I received my replacement Note5, I get calls from everyone except iPhone users. I tried everything I could find on the internet and nothing has worked so far, and Yes, I've written off of iMessage, also disabled IMessage and Facetime, contacted my service provider and troubleshooting solution she did, still cannot receive anything from these people who call or text me to iPhones. Can you help me?

    http://www.Samsung.com/us/support/answer/ANS00026729/248625/

  • How to download files from .aae back on iphone?

    1, I downloaded the .jpgs and .aae of files in order to create a backup and frees the space to take pictures another round.

    2, I find there are app dealing aply and .aae files them to images, on my Mac. No not even Photos.

    3, the only way to have .aae applied to the corresponding image files seems to put all the bin for the iphone, then export by dropbox or similar.

    4, now there is a problem:

    -itunes sync only jpg files, ignore files .aae

    -application of image capture (which I used to download all the content from my iphone) works one-way only

    -no other application knows how to put pictures with his .aae return files to iphone

    5, this means that once downloaded and delete files .aae of the device makes it unnecessary and the user is screwed?

    When you import your photos with the. AAE to Photos for Mac files, you can see from the Photos, the changes apply to your photos.

    For example, I imported this file:

    The imported pictures are showing the superposition of a badge "edit" on the thumbnails, and when I open the Control Panel, I see the effect of "Chrome" applied, which can be enabled or disabled.

    So, if you want to get the photos to the iPhone with the applied effects, import them into a photo for Mac library, select iCloud photo library for Photos on the iPhone and the Mac, and then sync your iPhone library. Select "Download original" on the iPhone. Once all the photos have been uploaded to the iPhone and the photos are back, you can disable again iCloud photo library.

  • Could not back up iphone on icloud

    Hello

    Since September my iphone 6 + is not saved in icloud. I'm using from itunes and then as an alternative.

    At the beginning, after that I upgraded my IOS in September, he started telling me I don't have enough space that was not true. After trying a lot of stuff I bought the 50 GB of storage to icloud. "the backup is always a failure, when I start the backup it starts backup then it shows the hour then it keep saying" ""the last backup could not be performed "

    I tried many things including restart my phone, not turning to backup, then on delete old backups, rejecting emails-photos-other applications from the next backup to make backups very small (about 350 MB) size, still no luck. I haven't tried different internet connections also no luck.

    Please advise if there is a bug or how I can do to take back my backup to icloud, otherwise I don't see why I should continue to pay apple to extra storage that I don't use. I've updated to the latest version of ios (9.2.1 13D 15).

    THX

    Research about - there are several threads on iCloud back ups cannot be filled. According to posters who have discussed with Apple their engineers are working on a fix

    I have problems making an iCloud backup on my iPhone more than 6. Each time a backup is performed the following...

    iCloud does not save my iPhone

  • My Apple Watch guard disconnect from my iPhone

    My new Apple Watch (42mm Sport, watch OS 2.0.1), since the first day, was disconnected from my iPhone (6, iOS 9.2).

    Most of the time in the day, it is not connected (with the small red disconnect icon) or it does not show my phone watch notifications. Sometimes even calls are not made to the phone and notifications on the steps on the orientations are not displayed on the watch, even if they are displayed on my iPhone.

    Also, my watch guard pass in airplane mode.

    I re-set the watch to the factory settings and paired with the iPhone twice, without success. My iPhone is still on my pocket with me at any time at the office and at home, so noBluetooth is still on my phone, even though I sometimes turn off WiFi so it does not connect to my office or the trolley.

    Someone has an idea of what could happen?

    Hello

    If you have not already done so, it can help to upgrade your Apple Watch to the latest version of the software (currently watch OS 2.1).

    The software update instructions are available here:

    Update the software on your Apple Watch - Apple Support

    If this does not help, so that--given the steps that you have already tried - I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

    https://www.Apple.com/support/watch/contact/

  • Airplay iMac switches back on computer after you select the apple tv. Why?

    From Imac display by selecting Appletv heard music lasts for a few minutes then switches to my computer. Why?

    Hello brianfromsooke,

    If you try to use your iMac, Apple TV AirPlay, but the audio output automatically switches to your iMac, it may not be the flow enough on your Wi - Fi network.

    If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

    Use AirPlay to view a video of your Mac on a HDTV

    Sincerely.

  • text back again iPhone to iCloud

    Will be my backup transfer iCloud my texts to a new iPhone?

    iCloud: overview of backup and storage iCloud

  • Why an Add - keep it swinging back on Ask to activate when I set it to always turn on?

    So my question of the unit is not resolved, but for some reason, whenever I put it to "Always enable", every time I leave the tab it switches back on 'ask to activate '.

    There is a problem of non-public safety with the Unity Web Player, so temporarily may not be programmed to always enable to avoid untrusted sites using this. I hope that this will be resolved in the next version. However, in the meantime, you can give a site permission using the Plugin notification icon.

    If this is not familiar: when you visit a site that wants to use the unit, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

    The plugin notification in the address bar icon in general looks like a small, dark gray Lego block; It can be red for high-risk plugins.

    If you see a good reason to use the unit, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar and he approve it. Firefox should then load the player into the page.

  • iTunes could not back up iPhone because the backup has been corrupted.

    OK, Ive never had this problem before. Recently my external hard drive, to store my filled iTunes library. I bought a bigger and did a drag and drop to copy the file to my new hard drive. I'm trying to make backups of my devices, but I get the above error code. Ive been searching for hours for a fix but nothing works.

    I went to iTunes > Preferences > devices and I did not all saved backups, which I already knew that, because I had deleted all until I tried the backups.

    I tried to find the exact directory of the file on the disk, but there is no, or I don't know what I'm looking for. I tried right click in the window for backups of the device and don't display in the finder, but nothing comes and theres nothing really click on since I already deleted files.

    I tried to update iTunes, restart the computer, non-montage and reassembly of the car, I tried 4 different phones, who have all worked in the past, 3 iPhone 6 and 6 s 1 iPhone all running iOS 8.x.x. I was going to update them today, that's why I save, so I want to do this before making the update just in case I lose data.

    In addition, iTunes works in all directions. I can sync the devices, but the backup fails, all and by all i mean random songs and videos have worked without error. In addition, Photos will come, also synchronized directly on the external hard drive and has synchronized successfully all my photos of these devices without fail.

    The only real problem is to create the backup that I could use for future restoration.

    Remarkable, I'm under OS X El Capitan 10.11.6 and iTunes 12.4.2.4 Version

    Device backups are not stored in the iTunes folder.

    http://osxdaily.com/2009/09/11/iphone-backup-location/ - your iPhone files are saved in the following location:

    in Mac OS X:

    ~(Your Home Directory)/Library/Application Support/MobileSync/Backup /.

  • Live Vodafone modem guard roll back installation before installation is complete

    Im trying to install vodafone live but just before the end, he is interrupted and starts rolling back.
    I home addition service pack 3 Windows xp - I have not an ongoing enforcement program antivirus - disable my firewall doesn't help - in the event logs I get the error Manager that follows service controll 7035/7036/7009 - also evntagnt 1003/1015

    Hello

    Just spent 4 hours trying to install Vodafone Mobile Broadband Lite software 10.0.302.24346 version using a modem K3571-Z and kept getting the same problem as you with the software of restoration according to software trys to start the services.

    Found that this problem was due to windows being disabled "Wireless Zero Configuration" service.  Found this automatic setting and then by installing the software corrected the problem.

  • Default sound will remain unresolved. Keeps swinging back on my monitor.

    When you try to listen to something, there is no sound through my speakers or headphones. When I go into Control Panel, the default sound is on my monitor. I go to my speakers but the button set as default value is grayed out.

    I stay together and keep coming back to the screen.

    I got this laptop late October and just point out that I don't want to continue to have to keep resetting it every day.

    HP Pavilion dv7 notebook

    Series # 2ce2401z09

    Product # a5f92av

    Windows 7

    Version 6.1.7601 Service Pack 1 Build 7601

    System Type x 64-based PC

    I did not make any changes. It has been thus since I have the laptop.

    I don't know why the link doesn't work anymore.

    Try this one

  • DataGuard swinging back on primary eve:

    I spent my primary database to the standby to the database successfully.
    I'm now trying to switch back sleep in elementary school

    However, I run a small problem.

    I'm using the command

    ALTER system set log_archive_dest_2 = reporter;

    but I get the error:

    incremental changes to log_archive_dest_2 with spfile;

    (I don't have this error when swicthing primary fron of Eve)

    Sorry, it's just want to confirm, original specified validation _2 log_archive_dest_2 and not log_archive_dest_State.

    Is this correct?

Maybe you are looking for

  • Delete the partition created in reformatting/reinstall for A50

    Then when I got my Toshiba Satellite A50, he had no partition that I knew of, just a drive C with XP installed on it. But the disk that it came with to reformat the hard drive and reinstall XP is creating a partition! So it's not the original or set

  • Intel 750 PCIe SSD 2.5 "unrecognized in P700

    Hello I recently bought an Intel 750 PCIe SSD 2.5 "drive and it hooked up to the TMIFA (adapter Flex ThinkStation Multi IO port) in the slot of a P700 flex. But the drive does not appear in the BIOS. I was wondering if there are specific parameters i

  • Problems of microphone with the Satellite A200 - 14 d

    HI when I try to talk on Skype, on the other side either does not hear me, or they hear me very bad.I tried pluggin in the headphones and they work, but whenever I turn on my computer, the settings seem to have disappeared. In the Panel that I'm on t

  • How to set the time difference between each data when using keithley 2400 scanning

    Hello friends, I use scanning Keithley vi the extent of SCANNING and acquire vi. I want to measure the voltage for each step and a pause between each two data, so I need a delay between each I step. I'm a starter to use Labview, thank you very much f

  • Updates Windows XP Home Edition.Microsoft.

    No number error but this message apears when I go to the update site:-"the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Please help as the options did