Audio editing based on presenter 8 slides

Similar Questions

• Grayed controls in Slide Audio editing screen - Captivate 5.5

  When editing audio in a slide, I inadvertently clicked on a control on the top which has now dimmed to cut, copy, paste, and remove controls.  How to make a comeback?  Thank you.

  Hello

  Welcome to Adobe Community.

  You must select a portion of the audio, so that these options will be enabled. You can do this by clicking on the audio waveform and dragging the playback slider to the left or to the right.

  

  Thank you!

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

• Play audio followed by the jump to slide

  Hello

  I have a problem with the execution of all stages of a tip action. I have a button which, after which is clicked, should trigger a short audio file indicating the correct answer and direct a user to another place in the project. It seems like basic function, but after creating an advanced with "audio playback" action and "go to slide" for the button and the draft edition, I get no audio. However, without action "go to slide" later, the audio plays as it should do both actions seem mutually exclusive. How can I make it work?

  I would be very grateful for your help!

  All instructions in advanced actions will be executed in the order immediately. You seem to believe that the jump will wait until the audio played, and this is not correct. Either you need to move on from statements, in which case the audio will play on other slides where you jump to. Or let the time for the audio to play before the break by combining action with the movement on the Timeline. Replace the jump to continue and provide enough time to listen to the audio by editing the inactive part of the button for the duration of the audio clip. Read head moves and reach the end of the finished audio clip slide. You can use the on Exit event to create the action of jumping, or (more reliable) action on enter the next slide. You provide enough details to be more precise, and it is also essential to mention the version you are using.

• Using FMS v4.5.5 with an audio player based on a browser running on iPad/iPhone

  Hello

  I'm looking for some clarity/guidance on the use of FMS v4.5.5 (edition streaming) with an audio player based on a browser running on iPad/iPhone (i.e. IOS).

  Background

  I have a Microsoft Windows 2008 R2 Web server running IIS v7.5 and support a site built using ASP.NET and c#. Parts of the site allow a visitor to play a selection of audio from our library of MP3 files custom clips. Lack of UK music license, we must broadcast the clip on the client browser - you should not download some or all of the source of MP3 files. So, we have a custom audio player built for us for a long time using Flash/AS3. It continues to work very well and uses the RTMP protocol to stream the clips to the FMS to the client browser.

  As our site became more that the number of visitors has been growing. In the early days, the number of visitors from the iOS platform was relatively low, but last month it had reached 40%! Flash is not supported on the platform, iOS, this growing group of visitors cannot fully maximize the benefits offered by the site, I'm now trying to address.

  What I'm doing...

  I've done research and read, I believe that FMS v4.5.5 support HLS and I need to use this (instead of RTMP) over HTTP between FMS and the client to iOS Safari. I have been experimenting with an Open Source (JPlayer) player and a commercial player (JWplayer) and seem to have these playback of an MP3 file as a "progressive download" (I think that's the right term) like all I do is to specify the path of the file (without the prefix HTTP etc.), i.e. the audio isn't really be listened to as I need. Unfortunately, I have not found / worked out how to configure my FMS to meet a demand of path along the lines of:

  http://www.myserver.com/live/AUDIO1.MP3

  I hope that someone who reads what is much more expert FMS, HLS, HDS, HTML5, etc than I can point me in the right direction!

  What I leave me puzzled...

  (1) can all my MP3 stay property is thus always be aired in the Safari iOS client? To the best of my knowledge, the main properties of my MP3 files are CBR, 44, 100 Hz, 320 Kbps.

  (2) If this is not the case, can they be converted on the fly by FMS or do I need to create additional audio support to support CTS etc. ?

  (3) if I have to manually create additional audio means, how do I (I saw references to tools of Adobe and Apple but actually found the kits)?

  (4) some of the Adobe documentation I read implies that FMS in favor HLS etc. is available only when the FMS is used in conjunction with the bundled Apache web server. As stated previously, my short of any site on IIS so means to achieve what I want, I have to run two servers on my physical - IIS server for the site itself and Apache for RTMP/HLS/etc web. ?

  (5) should what changes I make to my current setup of the FMS for HLS to work? I'm sure that someone here has already been and can enlighten me with their experience and hopefully point me to a simple to follow documentation!

  (6) Finally and truly part of five (5), once I have FMS set up correctly, which would be the typical path to an MP3 audio file that I would give the iOS Safari browser to make it all work.

  I appreciate, it's rather long first post, but I hope that the background my questions (and confusion) in context. Bottom line is... I just want to be able to broadcast audio clips only (no video) to iOS browsers Safari of FMS v4.5.5 running on a platform of Win2K8R2 with IIS v7.5 and no audio content stored (even temporarily) on the iOS platform.

  My thanks and gratitude in advance to anyone who can help me achieve this goal.

  Steve Barker

  Business IT Solutions

  Hi Steve,.

  When you told me that you were using the direct application I assumed you were a direct publication any. We use generally live direct request to publish and the application of the vod to stream vod assets like your mp3 files. That's why I suggested using livepkgr file and stream.m3u8 http://192.168.20.250:8134 / hls-/ livepkgr/_definst_/livestream/live url format. But now that I have a better idea of your installation, I will say please forget about it.

  You need HTTP streaming of your VOD assets for correct iOS devices? It's the method, you need to use:

  1. install FMS with delivered Apache - done

  2. have Apache listen to 8134 only and WFD in 1935 - done

  3. check if everything is installed correctly by playing the feeds on the homepage - done

  4. test HLS - VOD (HTTP streaming of active vod to apple devices) - in your attempt to safari browser to read a stream like http://: 8134/hls-vod/sample1_1000kbps.f4v.m3u8

  Audio-video playback is correct?

  5. then open /Apache2.2/conf/httpd.conf file in a text editor and search for . Under this directive to location, there will be a 'HttpStreamingContentPath' that points to the folder where assets will be picked up. Change in any folder you want and restart AMS.

  6. now, try reading a stream of this new folder of your (try a mp4/f4v file for testing purposes) like http://: hls-8134/vod /*.m3u8. The reading is correct?

  If everything works as expected so far then your setting of FMS is ready.

  Can convert you the assets in AAFC. I suggest take you a look here: http://superuser.com/questions/370625/ffmpeg-command-to-convert-mp3-to-aac. The basic commands to use are explained here. I would recommend mp4/f4v. Unfortunately I have not tried this on my end so a unable to provide an example.

  JWPlayer is a url which is simple *.m3u8 should be enough to play a stream. You may have read on HLS streaming to JWPlayer here: http://www.longtailvideo.com/support/jw-player/28856/using-apple-hls-streaming/

  Do try once more and let me know if it works.

  Thank you

  Apurva

• Audio to jump to the last slide

  Using Captivate 3 (but also have the same question in 2). Imported files wav separated for each slide. Audio plays perfectly edit mode, however, once published, only the first few blades works, and then all of the following slides play audio from the last slide. I read message boards but do not see a problem like that. Even tried audio export, the removal of each slide and re-import audio to all the slides, but nothing helped. Also, how can I program slides forward only when the user clicks on?

  I will address the problem of an audio file playing on the wrong slide or by repeating the same audio on a number of slides when the project is published. This happened a lot to me and the solution was:

  DO NOT USE WAV FILES! The only way I got the audio working properly was to convert all my WAV files to MP3 (at a constant bit rate of 112 kps), delete all WAV files I had previously imported into my project file, and then import the MP3 versions. Who stopped the problems of audio file. If you convert the WAV files in a binary variable rate MP3 with high throughput, you run the risk of the audio being slowed down by 1/2 or more, women make expresses its male, when you publish to Flash.

  I know that Captivate converts MP3 files to WAV files when they are imported, and then converts that their return to MP3 when they are published, but for some reason any using WAV files directly caused nothing but problems.

  Publishing for Flash in Captivate 2 (and it seems that Captivate 3 has not improved) is so buggy that I never know what my SWF files will look and act like despite everything works well in the project file.

  Good luck!

  Jim

• What to use for Audio editing

  Hi, I used Soundtrack Pro for many years and have finally updated to FCPX... y at - it easy audio software for the basic edition to replace Soundtrack Pro?  I tried to download tools first Pro to try it, but could not launch and I am really frustrated.  I'm looking for something basic, I think I can find similar effects that I used in STP in FCPX, but I liked that I could delete or silence part of the audio track instead of having to use the pen tool as in FCPX.

  I looked briefly Logic Pro, but this seems to be more for music creation of audio editing of an interview.  I have heard of Audacity, but which is stable software that will focus on my iMac (OS 10.9.5)?  I hope that makes sense and would be very happy to comment.

  R

  Use the tool in the range, and then press command-Opt-Cmd-S to silence.

• file audio sync with pictures to produce slide show/movie

  I have an audio file I want to sync photos to the expression in the audio file. for example, when the audio file says "flag" shows a picture of a flag. What is the best program to achieve... automatically... then put all the photos in the right order, then the playback of the audio file & selection when the photo is displayed

  A little more info - I had a quick glance through one of my projects where I had used this kind of editing associated.

  My method was to change the audio file independently and then add the images to files published prior to joining lump together. I created wav files in "Audacity" (free audio editing software) and divide the way in the four sections where I wanted pictures to start and end. So close to editing is required, it is easier to make the music track to adjust the images rather than the reverse.

  Otherwise just use the fine adjustment of the length of the image - the audio track "wave" could help a little with the alignment, but it isn't that easy to read in MM - if you want me to expand on any of this let me know... R.

• audio editing

  I downloaded audio recorder of the word. Now, I want to erase/delete some of the audio which is now saved on my Windows 7 laptop. Y at - it a free software that is for audio editing? This isn't music or video, it is a statement of class that I only need to. That's the part I want to delete and don't keep the information I need. Thanks for your help.

  It is free:

  http://www.Wavosaur.com/

  Carlos

• Audio editing in Soundbooth

  I edited in soundbooth several audio clips of a video sequence in first.  Once I discovered that I could not make changes to these original audio changes I've made several copies of a sequence in the first so I could try out different options in Soundbooth.  Now I have several sequences in first with audio edited from Soundbooth, but as I added publishes first ran gradually slower and slower to a possible crawl.  When I open this first project now, I can not even save the file and get a message 'No response' in the title bar.  Is there a solution or this supposed first editing audio in Soundbooth does not?

  Welcome to the forum.

  Looks like you're running out of resources, OR the "project bloating Bug" has bitten you. Check the size of your project and let us know what it is. See if this THREAD is useful.

  Good luck

  Hunt

• Audio Edition - not available in the 30 day trial?

  I have been using / learning Captivate 4.0 via 30-day trial (my full version is on order). I wanted to try audio editing capability; However, when I opened a blade that has audio and try to change thanks to select edit-audio, the audio Edition menu never happens. If this could have something to do with:
  (1.) the fact that it is the demo version?
  2.) I am trying to edit an audio file from one of the pre-loaded music files (corporate4) since I've not yet recorded of audio myself yet.
  
  Thank you.

  Jean,

  Try changing the audio for the project. Same result?

• audio editing - scrub

  I work with Audio > editing in Captivate 2.0 feature. It is generally effective, but miss me the ability to 'rub' - audio listening when the head of the recovery period is moved backward. The absence of the Mediterranean makes it difficult for me to find very tight to change points with precision. Y at - it a setting I'm missing that allows a scrub?
  
  

  Hi kathyn

  No, not that I'm aware of you missing something resembling a scrub. I'm guessing that you are already familiar with Editor dialog box, but just in case. If you click on the 'play' button (or space) or other action is actually a toggle. If you click Play and click the same button to Pause. This should give you a fairly close control over these tight points. Once you place, note that you can re-position the playback head using the left and right arrow keys for more precise placement. At the same time, if the area is very tight, I would be also zoom a bit if the points are most obvious in the waveform.

  See you soon... Rick

• 8. do not allow me to move the markers of the slide in the audio editing of slides in Captivate

  Support - seems to work sometimes, but sometimes not. Today, not! I'm a software simulation. Then save auido to be distributed across multiple slides. But in the audio editor, says "you have reached the minimum display time" whenever I try to move the markers of slides! GRR! all solutions?

  Hello

  In the case of the image you provided, the audio itself seems to be long of 2.5 seconds. So Captivate you cannot change the slide duration to be shorter 2,5 seconds, because the associated audio video needs this time to complete. The only way to make this shorter slide is to edit the audio clip, so his is shorter.

  See you soon... Rick

• Audio editing to the incorrect slides

  I'm creating an online orientation course which includes the voices. The problem that I am running is that there are a few slides that publish with audio from other slides in the module. For example, slide 34 plays audio from slide 89 when published. When I check the audio component in edit mode, it plays the sound. I'm doing something wrong or what is another bug, the largest number in Captivate (v3)?

  Hello

  Abu_Luke wrote:

  I'm creating an online orientation course which includes the voices. The problem that I am running is that there are a few slides that publish with audio from other slides in the module. For example, slide 34 plays audio from slide 89 when published. When I check the audio component in edit mode, it plays the sound. I'm doing something wrong or what is another bug, the largest number in Captivate (v3)?

  While I will not deny that Captivate has bugs, I'm not sure that there are all that many.

  I've seen others report problems with audio do not match. I think I saw also that the following steps will correct it in general.

  To correct the audio incompatible:

  1. Change the slide incriminated, where first shift happens.
  2. Note the name of the audio clip.
  3. Export the audio clip as a. Mp3 file.
  4. Visit the account where you exported the clip.
  5. Rename the audio element.
  6. Back to Captivate and replace the audio by importing the renamed clip.

  Hope this helps some... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• [Bug] Audio editing in child clip nested loops when the parent is made to gotoAndStop (1) after playing once.  FP + 18.0.0.324, FP19, FP20

  Essentially, once a movieclip was played, he heads to gotoAndStop (1) will cause audio within its child clips to loop, although the timeline will never trigger the.

  We noticed this bug popping up in a lot of product delivered and it goes back to the public Service 18.0.0.324 update (.225 is OK).

  Debug configuration: even after replacing EDI with FP20 projector, it can always does when you preview of Flash; but he will present in the projector, AX, FF and Chrome plugins.

  Create movieclip 'wrapper' on the main timeline at least 2 images.

  Create movieclip "subitem" within the envelope at least a few images of long.  Incorporate audio on a keyframe in a subitem.  No keyframes.

  For my test, a subelement is never allowed to play, and the audio is located on the frame 5.  Frame 1-4 contains "stop()" and one the event for debugging purposes.

  Add this code to the main timeline

  wrapper.addEventListener ("blah", foo);

  function foo(e:Event):void {}

  wrapper.removeEventListener ("blah", foo);

  wrapper.gotoAndStop (1);

  }

  and has wrapper dispatches an event 'blah' on its last image.

  Result: Seen outside the IDE, 'wrapper' play once, stops, and audio clip starts a loop with a rehearsal time based on the length of a subitem, despite the fact that a subelement does not actually play.  I added a text box and channeled text of debugging for it so that subitem would fall within its current framework, and it never leaves the Framework 1.

  Mysterious!

  
  

  Bonus: I traced a click of the mouse for SoundMixer.stopAll (), but he keeps only a single instance.  Don't know if TI which is a useful detail, but he suggests that each iteration is a new instance, once again, as if the home itself was in a loop.
  

  Solution: Play audio via code (Sound.play ()) instead of points in the timeline does not trigger this bug.

  Edit: (I hope that's enough to recreate.  I can provide a FLA on request, had thought that there was an ability to 'fix' this forum.)

  Edit 2: I forgot the Question.  Is there a workaround that can be achieved via a post parameter, or something global?  We have hundreds (thousands?) of files to the difficulty for our clients if this bug is not get patched in before they update past FP 18.0.0225.

  We injected a similar bug over the holidays that must be resolved. (We can have * just * past this fix today.)

  You still see this symptom with the latest version of the Flash Player? (20.0.0.286)