Audio fade in when the course is on LMS

Similar Questions

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.

• Menu stops working when the course is over

  Captivate 6, never send resume data are not checked, published for AICC. Course titles and restarts correctly until I get to the last slide. At that time, when I raise, I go to the last slide (which is expected) but I can't use the menu to return to an earlier point in the course. The menu opens, the slides are links, etc, but when I click, nothing happens. The project is implemented to stop the project at the end.

  Has anyone seen this?

  OK, so my next suggestion is to check if the Skin Editor is defined for the table of contents allow navigation only to slides that are visited.  Maybe when get you the course module and the LMS bookmarking shunts you have too to a later slide, the fact that you have already visited the previous slides is not in the content.  This means you are stuck on this later slide and the table of contents do not allow you to click on the items.

  If this isn't the case, it's maybe a problem with your LMS.  Publish the same SCORM Cloud modules and test to see if the same problem arises here.  Try to use SCORM AICC intstead to see if the bookmark is handled differently.

• Audio repeats itself when the user clicks on the button

  I use Captivate V2 and am fairly new with audio. I added a "I'm done" with audio button that says "click the I'm done when finished. During playback, when the button is clicked, the tail of the audio repeats. The only way I've gotten to stop is to make the active button until the end of the slide, but then the slide fainted until the button is clicked. Can anyone help?

  I finally understood that. I changed the button so that it displays for some time (4 seconds) instead of display up to the end of the slide, and then I extended the duration of the slide so that it displays longer than the key about 1 second.

• When the course Advanced Admin makes its appearance on the VIEW

  My question is double, first what is the Advanced admin appearing on the VIEW review and secondly when the design review will be available in the United Kingdom

  Tom Howarth

  VMware communities user moderator

  Tom,

  I received an email from VMware last night stating that the review of the business administrator is now available at various Pearson Professional Centers.  Unfortunately, the closest for me is always a trip plan.

  Whatever it is, I owe you a pint.

  ________________________________

  Jason D. Langdon

• Audio Glitch problem when the playback/record on Satellite A100

  Hello world

  I have an audio glitch issue with my Toshiba laptop.

  When you play any audio file off the coast of the HD I mean glitches.

  I play audio with the media player through the integrated sound card and...
  A Firewire Interface Audio FF400 RME. (which works fine on other computers).
  A USB Alesis Photon x 25 USB 1.1 Audio Interface. (which works fine on other computers).

  but all still produce this annoying glitch.

  Other forums (see below) seem to think it's the fan.

  But what anything what is the solution to solve this?

  Someone on one of the other forums (see below)

  Said that they could not fix it and sold their laptop, I hope I don't have to do that too.

  A reply as soon as possible to support Toshiba or anyone with ideas please give your contribution.

  concerning

  A.

  Satellite A100-998
  Main features
  -Numtxpackets® Centrinoa® Duo Mobile technology Numtxpackets® Corea? ¢ 2 duo Processor T5500
  -Windows® genuine XP Media Center Edition
  -Hard drive 200 GB
  -2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)
  -15.4 "screen Toshiba Trubritea® WXGA TFT display
  -Drive DVD Super Multi (Double Layer)

  Hello

  I had the same problem with my Satellite Pro A100 - basically whenever the fan kicks inside or outside, there was a glitch in the audio that pretty much unusable laptop for music.

  At the end of the day, I followed the advice of Nelucard and changed to MPS Multiprocessor PC ACPI processor/computer on Device Manager driver. I then had to reinstall most of my drivers, but once this is done, the fan has been all the time, so there are no glitches more - at least not once the laptop has heated up to... at the beginning, the fan still comes in and out, but after 3-4 minutes, that's all the time. I can live with that.

  It's far from ideal, but in my case it worked and I can now use Reaper, audio streaming and use a load of plug-ins with no problems. I hope Toshiba will come back with a better solution via a BIOS update in the future, but I think that this problem has been known for 7-8 months and nothing has been done so far...

  In any case, good luck and I hope this is of some use.

  See you soon.

• audio is lost when the video is imported in windows live movie maker but works when it is open in windows media player.

  audio of my video is lost when I import into windows live movie maker, but can be heard when played in media player. video is from jvc camcorder handy, file type is: MOD (video clip)

  Just because a file is played in Windows Media Player
  does not ensure that it will be compatible with the film

  Maker. Might be worth trying to convert MOD files
  before you import into Movie Maker WMV format.

  Perhaps the following links will propose a few ideas:

  Use. MOD with Windows Movie Maker files
  http://www.YouTube.com/watch?v=m31Ji4U5jWI&feature=related

  How to edit JVC. MOD files in a few easy steps
  http://www.YouTube.com/watch?v=ZY-cKaCEUJ4

  How to convert AVI files to Movie Maker MOD files
  http://www.ehow.com/how_5854160_convert-AVI-files-Movie-Maker.html

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Audio excerpt not when the video is paused.

  Hello! First of all sorry for my English, I'll try to explain. I have a Mac and recently I installed first CC 2015.  I think that this problem occurs in this upgrade.  The thing is now, when I stop any video in any moment, and I pass the video with the right button or left of the keyboard I hear the audio of this framework. Before it worked, and it was perfect to synchronize audio and video with for example a snap or a Clap.  A I press any butto disable this or something? Can someone help me please? I can't continue to work if I can't synchronize audio and video!

  Thank you very much!

  Ivan

  Type SHIFT + S to turn on or off the audio cleanup.

  MtD

• Can not find the audio fade handles

  Hello!

  I use iMovie 10.1.2 on an iMac running El Capitan.

  I can not fade in or out the audio tracks of blue color (aka in the foreground), but I have no problem making tracks to the color green (aka the bottom). When I place the pointer on a trail of blue color, the small yellow circle does not appear. What I am doing wrong?

  Thank you in advance for your help!

  Hi, deomedia,

  You do it right.  Placing the pointer over an item in the Assembly should reveal the handles of fade on each side of the blue audio.  Place the pointer over a clip in the media pane will not reveal the handles.  The clip must be in the time line.  If you are in the timeline panel and you are not able to get the handles fade by placing the pointer over the clip, it is possible that there is a conflict somewhere in your project or your iMovie app.

  Try to see if this happens with all clips or just one.  See also, if it happens to other projects as well.

  If this happens with all clips or in other projects, try to delete the preferences of closing iMovie then reopening while now down the command and option keys.  Delete the preferences in the dialog that results.  Then see if that solves the problem.

  If this does not work, you can try to create a new project and then copying to it your media in your current project and see if the problem replicates.

  Otherwise, you might try to open iMovie in a different user account.

  Any other default, you may have to reinstall iMovie.

  Troubleshooting can take time.

  Just to mention, there is another way to get an audio fade.  In the timeline panel, move the pointer over the horizontal line of volume and click on it while pressing the option key.   Who puts a point on the line of volume.   Then, right next to him, place another point using the same method.  Place as many points you need to get off the line volume, and then you can adjust the volume by moving the points upwards or downwards.

  

• Captivate 6.1 on Mac audio spontaneously returned to an earlier version of the course

  It's the strangest thing I've ever seen as a developer. I developed a course earlier this year that sat untouched for several months. I have recently found some hyperlinks in the course had changed and went to update. After that audio had restored the previous version, which is false. I need to re - register all the voices on.

  I had experienced many fatal mistakes Captivate and so I renamed the project cached folder. After that the audio came back to a previous version, I renamed the folder the original name, relaunched Captivate, and the problem persisted. I've never touched the audio tracks at all. I don't know why or how it could have happened.

  This bit of information about the cache of project editing makes me theorize that somehow a cached version earlier obtained course mixed when you opened the project to make the changes.

  If you were having a lot of problems with errors, perhaps your cache folder had grown too large and had to be cleaned rather than having its name changed.  If the record could not accept several cache files due to a limit size imposed, which may have contributed to the error where an earlier version of cache was used.

  If still unusual.

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Audio plays more when Firefox is not the 'active' application on the desktop

  Just updated to the latest version (10.0.1). Audio plays now is more if Firefox is not the 'active' application on the desktop. In the past, I was able to open the Firefox browser, go to a site to listen to the audio, then go to another application on my computer and the audio would play again through my speakers from the firefox website. Now if I do that I lose audio, unless firefox is the 'active' application, which means that if the bar blue top on the browser is blue and not dimmed. I tried the Add on "Always on top" and this does not solve the problem I have. I looked through the various settings and did not see a solution. Can someone tell me if it's change-able or if it will be is no longer possible through browsers firefox?

  DOH! Feel like a jerk! Understand my problem! Sorry! Uh, I (or probably any other) had put the audio for the other app I was using (Avid editing software) on mute, causing the audio does not sink when the firefox browser was not "active".
  Someone else has a similar problem should check to see if the other application you use has the sound 'on '.

• Quickly and easily adjust levels dB precisely when the heights of low audio clip using?

  Unless I use a height high enough audio clip, it is extremely tedious to achieve a specific level of dB.

  Is it possible to almost instantly making it easy to slip accurately when the height of the clamp is gray low?

  I know that I can in. the volume up and down by using ctrl - and ctrl = but when I do that I see not reassuring display of the confirmation of the dB level.

  Is it possible to this thumb upward or down while seeing the dB display?

  Ian, if you open the Audio pane of the Inspector and use these keyboard shortcuts to adjust, you see move the volume slider and DB digitally edit to the right of the cursor.

  Russ

  Edit: Insert the volume

• Audio call routed to the speaker when it is docked

  Hello

  When I anchor my Razr HD (JB 4.1.2) to my real car Motorola dock, my music will be automatically forwarded to speakers of the car, which is what I want, but for incoming calls and outgoing audio passes the external speaker to phones by default. I can touch the speaker button that forwards then the audio to the speakers of the car, but how can I do audio call road to the default car speakers and not the external speaker phones?

  If it is not a setting I can change then maybe an app that will do it for me?

  It seems a little strange that he must use the phones pregnant as I thought that the idea of a dock is to have fewer entry during the conduct of the user, I'm sure that ICS was not like that.

  Thank you

  Hi xrcist,

  Another phone never worked with your car? Were you able to route calls to your front car speakers?

  See you soon,.

  Nicole