Audio Glitch problem when the playback/record on Satellite A100

Similar Questions

• Problem with the electric guitar and Satellite A100-906

  Hello

  I get a strange sharp sound of my guitar amp speaker when I try to play starting from the monitor of my laptop. Is this normal? I used to play in front of a screen LCD LG and everything was nice and quiet.

  However a few minutes ago, I discovered the FL inverter, which exists in the monitor to my laptop and was not on my LCD. FL-ups would cause this noise to my guitar? I want to emphasize that I can not hear the sound of my monitor. I can only hear it through my guitar and the amplifier speaker microphones.

  I hope you understand my problem.
  Looking forward to a response!

  Thank you
  Nikos

  Hello

  I n t have guitar and can't be 100% sure about your question, but perhaps you need a sort of Notebook Surge Station and noise filter. Google a bit and look for info on this filter.

• Cannot get the sound to play when the pre-recorded videos on Webex access

  Original title: audio playback

  I have a HP Pavilion pc with windows 7. I can't get the sound to play when the pre-recorded videos on Webex access.  I checked all the settings and the sound works well when listening to music or playing games. There is a sound icon above the keyboard that looks like it is not if this could be the problem? If yes how to do it turn on?

  Hi Robin,

  1. it worked before?

  2. are you aware of changes to the computer before the show?

  3. you use WebEx with product Cisco meeting place or alone?

  4. how to access pre-recorded videos on WebEx?

  Because the sound works properly with another application, it seems that you may need to change some settings in WebEx. You can contact WebEx support for assistance:

  https://support.WebEx.com/MyAccountWeb/supporthome.do

  Hope this information helps.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Mr President.

  Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Because I change the size property of the table 5 range and my new record is inserted at no 10.

  When I click the addRecord button the new parallel line does not appear, do scroll down to see it.

  I want that we don't have to scroll down.

  The line is displayed automatically.

  as shown in the photo my behavior of page.

  

  Concerning

  If you just need the newly created line to be visible,

  You can simply set contentDelivery = 'immediate' and displayRow = "selected".

  P.S. the blog mentioned above only.

  See you soon

  AJ

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• Problem with the playback of an audio .asx file in Windows Media Player.

  Hello

  I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

  I get the following in a pop-up error message:

  Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

  Help, please.

  My email address is * address email is removed from the privacy *

  Thank you.

  -HimAlandi

  Hello

   
  1. facing this problem with the .asx format?
  2. you remember to make changes to the system?
  3. where is the file?
   
  Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
  Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
  If you encountered this error by clicking a link on a Web page, the link isn't valid.
  If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
  The following is a list of protocols supported by the player and the correct URL syntax examples:
  
  (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
  (b) http://server/filename
  (c) rtsp://server/filename
  (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
  If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
   
  To configure the protocol settings
  (a) in the Player Windows Media, on the Tools menu, click Options.
  (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
  (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
  If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
   
  To rename the folder of information networking of player.
  
  (a) close Windows Media Player. (To do this, on the file menu, click on exit).
  (b) to make the changes that you will be able to see the hidden files and folders
  Show hidden files.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files
  (c) click Start, and then click computer.
  (d) open the disc drive Local (c :)), open to users.
  (d) open your user account.
  (e) open %APPDATA%\microsoft\windows\sendto and open Local.
  (f) open Microsoft and open Windows Media.
  (g) click on the file and rename it.
  (h) if the file is name12.0, edit as file name as old 12.
  (i) restart the computer and check

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.

• Reading problem, when I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB

  When I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB, im using adobe production premium cs6

  Here is my card in my machine.

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: of 2.66 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 cache (per CPU): 4 MB

  Memory: 8 GB

  Bus speed: 1.33 GHz

  It is found on all projects, I'm still under snow leopard, I have a NVIDIA GeForce 7300 GT graphics card, and yes the playhead stops after a second reading of a video in the source and program window.

  After hours of research and troubleshooting, I managed to solve the problem by signing on the standard user and account logging in as an administrator. Somewhere in the standard user account prevents play video.

  I'll recreate a different standard user account and see if that fixes the problem.

  Thanks for your response

• Audio fade in when the course is on LMS

  Audio a course fades at the beginning of each slide when the course is mounted on a LMS System.  When previewing the course on my computer, the sound plays normally and there is no fade.

  The course is a sensitive project to Cp 8.

  Someone at - he never seen/heard this before?

  Thanks in advance.

  He solved.  I was testing the course and clicking on the next button until audio had finished playing.  When I let play throughout, discoloration problem has disappeared.

  Haste makes waste.

• Audio repeats itself when the user clicks on the button

  I use Captivate V2 and am fairly new with audio. I added a "I'm done" with audio button that says "click the I'm done when finished. During playback, when the button is clicked, the tail of the audio repeats. The only way I've gotten to stop is to make the active button until the end of the slide, but then the slide fainted until the button is clicked. Can anyone help?

  I finally understood that. I changed the button so that it displays for some time (4 seconds) instead of display up to the end of the slide, and then I extended the duration of the slide so that it displays longer than the key about 1 second.

• Problem when the PWM signal combinning and analog signal TOGETHER!

  Hello everyone,

  first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

  My VI shows:

  1 is a normal meter production to create my PWMout signal.

  2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

  3 is an entry of the third extremety of the analog potentiometer.

  4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

  My problem:

  When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

  also with 3. and 4. in the same VI only i can control the motor valve without any problem.

  but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

  so this my problem, if you can think of any solution please let me know.

  Thanks in advance for your help.

  Kind regards

  Caliente

  Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

  While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

• Problem when the copy of the newspaper

  I just bought a new Pro Laserjet MFP M276nw. When I copy the daily crossword from the newspaper, empty cells prints gray rather than white as was the case with my previous ink jet which was a HP 309 has. I don't see all the parameters that will change that outside the change of 'lightness' or 'dark' settings. Is there a solution?

  Hi RossL49,

  I see that you are having problems when copying. Daily crossword cells are printing in gray instead of white.
  I'll be happy to help you.

  A cheque to document all the copy settings to see if this will solve the problem.

  Fix the copy quality issues.

  You can define a new default copy settings once the problem is resolved.
  You can save any combination to copy the settings as default settings to use for each job.

  In the home screen, press the copy button.
  Press the settings button.
  Configure the copy settings to your
  preferences, then highlight and touch the
  Set as default button is new.
  Press the Yes button.

  To test the paper (newspaper - which is not bleached paper) print a worksheet with empty cells and make a copy to see if they are white.

  Please let me know if you need additional assistance.

  Thanks for posting on the HP Forums.
  Have a great day.

• problem when the old program running on windows 7

  Hi I am using windows 7 64 bit.

  At the moment, I really wanted to go back to the era when I still have a kid who play soccer games on computer. at this point, I use windows xp, and it's my favurite game program

  Manager FIFA soccer 96/97

  The 98 World Cup

  FIFA 99

  the 99/00 Championship Manager

  now I am using windows 7 64 bit and meet a lot of problem

  the game works well, because I set the compatibility mode to windows 98.but it is just the text.so in the game of football, his divided to two parts. the first part is text, where we see players, statistics, etc. that work well

  the second is soccer game. I believe that associated with vga and color. and that's the problem. I see so many pixel, playing the football game on these games

  I guess that this is related to my "64 bit version" of windows. because when I was googling somewhere, I see old-fashioned, using 16-bit. This my vga downgrade and cannot display video smoothly.

  What should I do?

  Hello

  Please contact the Microsoft Community.

  I wish that you contact the respective developers of the game or play the game and check if there is a patch available for the same thing.

  We know if you need help.

  Thank you.