Audio in place in Premiere Pro | Need help ASAP

Similar Questions

• iPhone 6/6 slowed down 240 fps movie camera. MOV clips play not idling in Premiere Pro - need help

  I know it is understood to be in place before the slow movement in Premiere Pro. I have the clips that play very well at idle on the iPhone 6, but when I open the in Premiere Pro CC 2015 they play as normal videos without movement of slo. Can someone help me understand how to import and then get these clips to play correctly in Premiere Pro?

  TIA,

  Ken

  1 try to import as always

  2 Select the item in the project window / right click / Edit / film

  3. Select your work rate (i.e., 25 fps) (instead of the file frame rate)

  4 drag the clip to the sequence

  I hope this helps...

• I installed 20 GB memory - only 16 13 GB / showing in Premiere Pro - any help?  (Care and pictures below)

  I installed 20 GB memory - only 13 GB showing in Premiere Pro - any help?

  

  (Windows 7 64 bit - map Quadro 4000 - 20 gb DDR3 RAM PNY) I doubled checked with SPECCY that something was wrong

  

  Upgrade to Windows 8, 8.1, or Windows 7 Professional.

  In this case I suggest you install 6 x 4 GB sticks to bring the total up to 24 GB, instead of 4 x 4 GB more 2 x 2 GB you have now. Mixture of different sticks (2 and 4 GB) in the same bank of memory is not optimal. Also take a good look at your cooling. 60 degrees for a CPU under heavy load is ok, but if it was inactive, it is very high. The Quadro is also quite warm, especially if shooting Speccy was made so that almost inactive.

• I can't stop the subscription the Premiere Pro, please help!

  I can't stop the subscription the Premiere Pro, please help!

  Check if you can contact the Support from Adobe using the second link

• Alpha channel images displays incorrect colors. Need help ASAP! I have samples

  After that update recently in CS 2015.3 which is weird, as I already had CC2015.3, there seems to be a problem with my graphic images of sequelae. The color is now off. I used these graphics in first pro projects before this update without problem. Now without further changes to the sequence, the graphics have all color issues. What is the Adobe issue? I have samples of before and after that I can send... Need help ASAP! Examples of links below...

  Monologue Monday before the update recently in CS 2015.3

  https://youtu.be/9-kKOfUXfEU

  Monologue Monday after update recently in CS 2015.3

  https://youtu.be/tBokuWCGUks

  Please explain what is happening when there where no edit change just a relay audio? FYI I did this process for several projects over the years and this is the first time that I had this kind of problem. I need it fixed ASAP or troubleshooting help, if there is something that I can hurt you please!

  as you may or may not know - he recently was a security update which States that Quicktime player is not safe for windows: it's probably not safe to use Quicktime on Windows more. Gizmodo UK and I think that's the reason why Adobe put in place the ability to import and export some QT Codecs without whether it is installed. That being said, there was also a notion that the player is not sure and the essential elements can remain on your system. You can use a lot of players that is not QT, such as VLC Player. and as I suppose - it is a BUG. It is not supposed to happen. and it's a hypothesis because unless you remove Quicktime and check - we do not know if this problem is solved (I used this term and not "solve" because it is a temporary solution) the question. of course, this is advice from a user like you and use it at your own discretion, as suggestions in the forums.

• After I updated my iPod wants a lock to activate I need help ASAP

  After I updated my iPod lack of activation I need help ASAP

  Help here > If you do not activate your iPad, iPhone or iPod touch after installing iOS 9.3 - Apple Support

• Multi-cam sequence only ONE AUDIO CHANNEL LEFT, Adobe Premiere Pro CC TIMES.

  Hi all

  I was wondering if someone could help me out here. I have several hours of short clips (1-3 min) of an event of 3 days I am organizing and preparation for editing.  I wasn't on the shooting, but the cameras record the external microphone (main audio) on one channel and the internal microphone (audio reference) on another channel; but it varies on what channel they recored reference main vs.  For the clips where someone talking directly to the camera and I know that I will not need the audio reference, I went and made "audio editing" and mixed the "stereo" until "mono" and then selected the channel with the "audio main' to be source channel.   It works now great when the person talks it comes in evenly on the left and right speakers instead of being unbalanced.

  However, when I then try to take 2 of these clips which were mixed at the bottom of 'mono' and create a new multi-cam sequence, new sequence plays constantly audio only from the left lane.  I tried many configurations where do the multi-cam of sequence (automatic, mono, stereo, Adaptive). Nothing works - he ONLY plays the left side.  I also tried to change the audio channels after I do the new sequence and put "Channel 1" in both channels left and right.  Nothing, he still plays on the left side.

  Any idea on how to get my mono source channel to play regularly in the left and right channels instead of only in the left?  Also, if I try to Pan right in the effects window, it's just quieter, not balanced.

  Thanks for the help!

  Found a solution here multicamera Source Audio sequence of 1 speaker instead of two? HELP Please!

  CTRL + N or command + N for a new sequence, select your preset (in my case DVProHD > 1080i) and make sure the audio channels are all mono. Then copy and paste all your clips into the new empty sequence.

  When I upgraded from Premiere Pro CC 2014 and 2015, all my sequences blocking started playing mono audio through the left speaker only. I'd just create a new multi camera sequence or if I opened one I had created in 2014.

• Why can't I export the audio edited hearing in Premiere Pro?

  How to fix the box gray? I can't click on "export to Premiere Pro.". "

  Thank you!

  Export of Premiere Pro is an order of menu only multi-track.  If you send a clip to the hearing, then just save and return to the first update in the timeline of the sequence.

  When you send one or the clips at the hearing, first performs a rendering operation and replace it, generating a new clip and place it on the timeline.  Hearing opens the file for editing, so that first it leaves open for reading.  When you switch to the first, it checks if the clips have been changed and updated the waveform.  There is no need of what whether export returns with this method because the files are already there!

• Lossless Audio only export in Premiere Pro

  Hello

  I finished a long project in Premiere Pro and the original idea was to use the 'Edit' button > 'Edit in Adobe Audition' > 'Sequence' to export all my 14 tracks to make adjustments, corrections and the final mix in Audition CS6.

  It turns out that the 'Edit in Adobe Audition' is absolutely useless in this case because the PP at hearing .xml export format will allow only to save the new project of Audidion in 16 - bit, 48000 Hz stereo, but all my original sound is 24 bit, 96000 Hz stereo. Of course, I could live with the limit of 48000 Hz, but not the 16-bit (which, incidentally, makes me wonder if and how Adobe plans do pros use the hearing for a final film mix).

  So I'm stuck with the need to make all the PD Flickr photos to make the mixture, perhaps even its importation in hearing. Being all my audio wav 24bits------96000Hz, is this the best way without loss of export to wav by selecting "Uncompressed" for "Audio Codec" and using the same sampling rate and size of my original sample files?

  In case this is the best way to do that, are there problems I should be aware of, in case I decide to export it in 32-bit floating point instead, if required to use certain features of hearing or other soft?

  Thank you very much.

  This is the best.  I can't think offhand problems.

• Audio to skip in Premiere Pro

  OS: MacOS X El Capitan

  Premiere Pro Version: CC 2014

  Video file type: formats .m4v (Shot on iPhone 5 s to 1080 30)

  When I play videos in QuickTime Player, the audio is normal, not to jump. When I drag and drop them to the Prime Minister and to play them, the sound skips. With some of the clips, the sound would jump and then after a while, just stop playing the sound. I have also some footage from the GoPro, but this film is not jump as do the iPhone files. He has not done this in the past. What should I do?

  EDIT: If you want to know what I'm talking about, here is a video of my problem.

  Nevermind, it was the file format. I just had to change from .m4v to .mov and it worked.

• Adobe Premiere Pro download help

  Why can't I download Adobe Premiere pro CC? I have the CS6 version, but it doesn't let me download the CC Version. How can I fix it? Help, please

  Hello

  If you have licensed Adobe Premiere Pro CS6, you will not be able to install/activate first Pro CC unless you purchase a subscription to creative cloud as CS6 and CC are 2 different versions of products.

  Thank you.

• Bad Audio. MTS files Premiere Pro CS4

  Hello, I have looked around and have not been able to find that everything related to this post. I am importing a 29.97 AVCHD 1920 x 1080 .mts video shot on a Sony FS100 into a 1080 p AVCHD 30 sequence in Premiere Pro 4.2.1. Everything seems fine, except that the red bar made appears and the audio is nothing but really bad static. If I make the work area he plays very well except for the audio (still static). If I play the video in VLC, it plays very well. Even with Final Cut Express import via the log and transfer (intermediate apple) - looks and sounds great. But I can't do anything but bad static in Premiere CS4 and After Effects CS4.

  MTS LPCM in CS4 http://forums.adobe.com/thread/913935 noise problem

• Problems with the Audio after export in Premiere Pro CS3

  I am currently working with Adobe Premiere Pro CS3 and after that I have export my project to an AVI or MPEG (does not seem to matter), you can hear the buzz stirred in the background during the entire video.

  The audio sounds absolutely perfect everything while listening to him itself, it is only after I export it.  This is the first time it happened, I've never had these problems before.

  I tried to turn off multiplexing, I tried MPEG2 vs DVD in multiplexing with no difference.  I tried MPEG vs PCM as audio format, I tried different frequency, different bitrates, constant or Variable and nothing seems to work.  More funny, if I export as a part of the video, the audio seems fine.  It is only if I export the entire video I have that noise of snoring, restless in the background.  I thought that maybe it is just a file in the project which is the cause, but no matter what part of the video I export, it sounds good... I don't understand.

  I have attached an example of my problem in this post... anyone got any ideas?

  To Render & replace, select an Audio Clip and choose (Toolbar) Clip > Audio Options > Render and replace. A new Audio Clip will be created and will replace the Audio Clip selected in the timeline panel.

  Now, there's these Audio Clips of multiplex Audio & video, files or separate the Audio Clips?

  Good luck

  Hunt

• Ink cartridges stuck, need help ASAP please

  Hello I'm writint this because I need help! I get an error message my Macbook Pro on my Photsmart 6520 is blocked and it says to check if all obstructions are bloacking it. Hoever, it's like the 20th time I check inside the printer over and over again. Make sure that everything is in order, however when I turn the printer back on, he will say the same thing and I keep trying to make it work, but it won't! I just got the printer yesterday and I caanot establish it, please help it is urgent.

  In the paper here troubleshooting steps may help resolve the carriage jam message on your printer Photosmart 6520.  If the steps it do not solve the problem, I suggest you contact HP support.  If you are in the United States or Canada call 1-800-HPINVENt, also see details here.

• Unable to start Lenovo Yoga 10 + HD, need help ASAP!

  Hi guys,.

  Here, I am a little confused. I just bought the Tablet Yoga 10 HD + and everything was fine. Today, I realized that my power button flashes constantly (every 3 seconds). I can't start the tablet in the usual way by pressing the button. Click on it for more than 10 seconds won't change anything eiter. What is this and how can I pick up my tablet to work?

  PS: If I connect to my tablet to my PC, I get more than 12 + hard disks that are not accessible and differ between 550ko up to 12 GB.

  I seriously need help. I think that its somehow "standby mode" or more. I don't know how to solve this problem.

  thx for any solution.

  OK guys, got it. Any fine. Had push button for more than 30 seconds. All very well now.