Audio jumpy on Satellite P100-347

Similar Questions

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• Satellite P100-347 - nVidia drivers day?

  Can support Toshiba fix some vista updated drivers for:

  Satellite P100-347... (pspa6e)

  This should be up to date on Toshiba site, because the drivers on
  NVIDIA.com do not work on my Toshiba laptop...

  Thnx

  It is well known that manufacturers of graphics support pages downloaded drivers cannot be installed on laptops. Each laptop manufacturer must ensure that display driver works well on the specific cell phone model and will not force the graphics card to run on the highest level.

  I hope you understand why laptop manufacturers do this.

  In any case, you can just hope that your message will be read by the Toshiba support service. ;)

• DVD drive does not burn/erase RS - Satellite P100-347

  Hello

  I bought a Toshiba Satellite p100-347 PSPA6E laptop computer. It has a DVD burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn any DVD (please see example using dvdino: http://tinyurl.com/2hbpqv).

  However, I can't rewrite on my Maxell dvd + rw (1.4 x speed) dvd. whenever I go to a software application to erase a dvd that I wrote on, it says unrecognized format. For example, Nero says "this disc is not rewritable and therefore can not be deleted. Please insert a rewritable disc.

  The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(

  Please can anyone help:(je suis vraiment coincé et il serait beaucoup aprécié)

  JAS

  Hello

  As you probably know, readers don t support all kinds of media.
  I mean not every CD - R, DVD - RW, CD + RW, DVD + RW, and so on, average is supported.
  I can confirm these issues in my practical knowledge I tested for several months and many media, I use the TDK on my laptop and only CD or DVD media.
  They work best with my drive...

  But I'll give you a tip:
  You should remove other software burning like sonic, etc if you use Nero. The joint software sometimes makes trouble.

• Satellite P100-347: Blue Leds - they disabled/disabled?

  I read several topics in the forum on the P100 Harman/Kardon speakers Blue LEDs/lights. None expressed a definitive answer on how to turn off the LEDs.

  I was wondering if a new update on this issue has occurred. The last post of forum about this was in February. Is it possible to turn off those annoying lights in newer models of Satellite? I would disconnect the wires so its an easy task.

  My laptop is the Satellite P100 - 347 (SPA6E)

  Thank you very much

  Hi Dan

  Have you used advanced search forum?
  I don t think so!

  I have used and found several discussions on this topic.
  I searched in the section P satellite for blue light and learn from these publications:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16008&MessageID=58569
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19701&MessageID=72256

  Then why write something that has already been discussed here in the forum?

• Satellite P100-347: blue screen at startup - unable to boot volume

  Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

  During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

  I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

  Can I do other than take it to a technician?

  Hello

  Well, for the most part the BSOD appears due to hardware problem or serious software.
  In your case, the software problem is possible

  Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
  Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

  I think, now, you know that regular backups are important and necessary!

• Instant stopping and restarting on Satellite P100-347

  My satellite P100-347 maintains close instantly then restart. All the solutions because its still new and very expensive for a replacement.

  Hello

  It seems that your machine is overheating and then he made a stop for reasons of physical security.
  You said that it happened when you play NFS carbon, it is a good sign for a cpu/vga heat problem.

  I suggest you to clean your fan and your cooling system, because when it s clobbed with of the dust of the system cannot be properly cooled and it is stopped to avoid serious damage to your valuable equipment. Just be a can of compressed air and clean your cooling system (but gently, otherwise you may damage the fan who convey the air that is heated from cpu/vga)

  Just a question: what drivers are installed for your vga? You have the original toshiba display drivers? If this isn't the case, then the problem is self explaining because schedules of the original nvidia/ati drivers are not suitable for laptops.

  Welcome them

• Satellite P100-347: How can I replace key caps

  How and where can I replace my Cap B and V on a computer laptop satellite P100-347.

  pls I need help quick and serious.

  Hello

  The replaceable keys and you can order this key to ASP in your country or check various online brokers who provide such Cap sets.

  Google a bit and you will find a lot of offers

• How to find the exact motherboard for Satellite P100-347 model?

  Hello
  I hope someone could help me. I'm looking for a new motherboard for my computer toshiba laptop because it replaced needs.

  I own a laptop Satellite P100-347 of pspa6e-03302cen and have not been able to find this anywhere online forum. Although I found two suppliers of many motherboards of p100, they use numbers of alternative model in which I can't find anywhere in my documents or on the computer. The model numbers they use are something like A000008350 or a number starting with k. I'm sure that the supplier I found has the motherboard, I would need but I would need a list of all the numbers of the other party for my laptop, or a way to find the exact numbers. Any help on this is appreciated...
  Thank you

  To be honest I really don't think that someone here can offer you this info. As you know, this info is for internal use and you can try to get this info from service provider authorized in your country. Sorry, but I don't see a better solution, except to wait here and hope someone can help.

  Good luck!

• Cannot be accessed by Satellite P100-347 after the password of BIOS setting

  My friend has recently created a startup password using the numeric keypad and now I can't access my satellite P100-347 beyond startup even if am to enter the correct password!

  Is there anyway around this problem?

  Hello

  Bad sorry :(

  Unfortunately, you must contact the ASP in your country for this problem.
  Technicians have first remove this BIOS password.
  In addition, I think that to avoid this problem, the BIOS must be updated to version 2.40 or higher and also the Toshiba utility must be updated to version 1.8.14.2 or higher.

  Good luck

• On my Satellite P100-347 cooling fan runs all the time

  Hello

  I think I might have a problem with the fan on my Satellite P100-347. He seems to be constantly works constantly and is much stronger than when I bought the computer. Initially he just spent and if so, I think that this could now be wrong.
  Help, please.

  Hi Beata

  I agree with the suggestions of Sanremo; He s I don't known how old your laptop has but from time to time it of necessary to clean the cooling fans. Dust and debris inside the laptop could prevent the cooling modules work properly!
  The fresh air flow is also very important. Don't forget that there is enough free space around the laptop. Do not use the laptop on the lap or in the bed. In this case the laptop cannot be cooled in the right way and the high temperature can damage parts such as GPU to the Board of Directors.

  But if you think that there is a serious hardware problem you must contact the service provider authorized in your country.

  Good luck and greetings to Poland ;)

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Satellite P100-347: Multidrive DVD - audio cracks

  When I try to read a cd or a dvd, the sound cracks (ugly sounds) the unit will play allright, p100-347 malfunction or a technical solution?

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19916

• Audio dropouts on Satellite P100

  I have a Toshiba laptop Satellite P100 PSPADE.
  OS: Win XP Professional
  Connected equipment: MOTU 828MKII Firewire or Terratec DMX 6Fire USB.
  In both situations, audio dropouts occur, using Cubase SX3.
  I already disabled some elements in the Manager of hardware devices, such as:
  -Microsoft AC adapter
  -Control compliant ACPI Microsoft method battery
  -Network adapters
  -Bluetooth device
  -Sound controller
  - ...
  Only the devices battery generated many audio dropouts, which are now reduced by disabeling the drivers.
  Nevertheless, sporadic abandonment occur always.
  Although, Terratec, and MOTU audio devices using the maximum buffersize, increasing latency, but reducing the school drop-outs, audio drop outs occur.
  Reading a few articles, I came to the feature 'gas CPU"of the Toshiba laptops, which might be responsible for these audio dropouts.
  The articles mention that he is a non-configurable feature of Toshiba.
  Audio dropouts seem to occure synchronous with the activation of the fan.
  To contol the latency, I use "DPC latency Check" program, which generates a bar graph.
  The peaks of bar-graph each time that the fan turns on and at the same time, a stall audio is heard.
  Is there a solution to the problem of audio dropout?

  Erik

  Hello

  There were MANY discussions on this subject, especially with your machine. Many users tried different solutions such as remove things from the device manager like you did already.

  In General, editing music with a laptop are not really optimal. For example:

  I have a computer of office machine with a Pentium 4 2.8/1 GB RAM/WD Raptor/ESI Juli @ and I also work with Cubase SX3. There is NO problem with the latency (latency DPC latencies around 15-30 microsec Watch).

  I tried to make some changes on my Tecra A9 which has a Dual-Core, 2 GB of RAM, a HARD drive with 7200 RPM with XP on it, etc... and at the beginning I had many heavy withdrawals.

  But after a search of this forum and a few other sites, Ive created a small tutorial:

  1. services:

  For Windows XP: Please visit the following site: http://www.blackviper.com/WinXP/winxp.htm
  and apply the configuration of services twisted.

  For Vista: Go to this site-> http://www.blackviper.com/WinVista/Services/ and see the following:
  -Configurations of Viper black Windows Vista SP1 Service-> twisted
  -Super Tweaks

  -In addition the client must disbale the service "smart card"!

  2 disable the following devices:

  -Compatible control method battery ACPI Microsoft
  -Intel ICH8M Ultra ATA Storage Controllers (including the optical disc drive)
  -Ethernet and Wifi
  -Storage-> Microsoft iSCSI initiator controllers
  SD card controller

  3 disable the powermanagement features:

  -In 'Device Manager' option to allow the computer to turn off this
  all "USB root hubs" should be unchecked
  -Create a separate powerplan who can be named 'Maximum' and put EVERYTHING
  maximum (disable these features like 'sleep' and 'sleep')

  4. run the application 'msconfig' (internal tool of windows) and remove all the
  unneded services and applications in the startup list, which could include
  some tools Toshiba as "configfree" "flashcards" etc., but at YOUR OWN RISK!

  5. as you have more network connections, you can also disable all
  services such as "Windows Defender", "Windows Firewall", "security policies."
  etc. which contains a large number of resources!

  6. I recommend to keep all the drivers including BIOS update. You can use
  drivers of Intel on the chipset/storage controller/graphic chipset
  which most are more recent so our pilots.

  -> Below only for Vista!
  7. at least, you must disable this thing together graphic Vista as
  «Aero, "Windows Sidebar", etc., and switch to the Vista Basic theme.» The window
  Manager themes Vista is necessary and a LOT of resources that offers more
  resources for applications and results also in a latency time reduced.

  8. check the Web site of the manufacturers on the updates support for the device that is in use! (which means the sound card ;))

  It could be that useful...

  Welcome them