Audio lags during recording.

Similar Questions

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Crackle on audio/entry track record - no buffer, plug-ins or sound card. AAARGH!

  I have a slight Crackle on phonograms and supervision right of entry and via these forums and other troubleshooting failed diagnose the problem. Seems to be a product where caused by the audio signal, as occurs in response to an audio input (guitar and bass), not a constant or random noise. A faster attack of the audio signal produced more noticeable crackling.

  It happens to all sizes of the I/O buffers

  CPU load does not seem to be a problem - CPU monitor, both within the logic and across the system may display less than 10% (between all hearts) and it happens when dry recording in a project with a single track (audio) without plug-ins.

  Established between Apogee Duet and Scarlett Solo using different cables and which makes no difference.

  Does not occur during playback back already recorded audio - only new records and monitoring live (or recorded on a track and playback) entry

  Removed the unused midi drivers from (a thread somewhere suggested that for a similar problem).

  .. I am now mainly to a loss of the cause. Don't you no creaking when recording an audio file to QuickTime via the loudspeaker internal, next step, I can think of is to install Garageband (but reluctant to pay apple even £3.99 they want to download it to the app store!) and see if crackle present in audio recordings, in order to reduce it to a software problem (fingers crossed) all the material from the laptop. Or get a copy of logic 10.0 and see if the problem persists in this.

  Recently reinstalled logic 10.2.1 after repeated crashes (and abandonment of strength) when manually move the playhead... as well as other minor bugs 10.2.1 seems to have been shipped with, but this problem started a week or two after re - install, no problems so far here.

  As someone has any ideas other than a glance phone to Apple, which I fear would be very useful even when it doesn't seem to be a known issue.

  Thank you

  Sam

  MacBook Pro (retina, early 2013)

  10.10.5 Yosemite

  INTEL CORE I7 TO 2.7 GHZ

  16 GB OF RAM

  Logic Pro X 10.2.1

  Apogee Duet/Scarlett Solo

  Fixed. Questions of the instrument.

• Audio lag and out of sync with MOV to iphone.

  I'm having a problem with audio lag in my changes. I record a lot of video on my Iphone of 6 to 1080 p 60 fps in the mov file format. I do a lot of cuts as someone would when editing it video. When I export the audio after a time the sound is out of sync with talk to me. I have to then unbind the audio clip and place the line of audio track back to match kind of them. I edited 4 videos like that and it's frustrating now. I export the media in exactly the same format, but it turns into MP4 which is normal. Someone help me please as I am out of export see flushing of the question and repeat.

  Some people find that video of Apple (iphone, etc.) will not be easily edit because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

  - or convert to constant rate with https://handbrake.fr/ opensource transcoder/converter

• HP Pavilion PC Sleekbook 15: Audio lags / slow works?

  First assignment in time.

  I had this problem for a while. My audio lag on Persia. Its a little hard for me to explain it, but I'll give you a scenerio.

  Loading something with audio as a game or a video, if I haven't used anything that uses the audio or I just open up the laptop, should be more than a minute for everything I was loading to work.  And I think that its due to loading audio.

  As: I load a Youtube video and the video will play. BUT custom audio. The timer at the bottom would always be 0:00. That would take half a min then the video stops and the audio will play, as his tent to catch to the point of the video where he stopped, then it continues normally.

  Now. If I left the office for more than a minute without anything playing any kind of audio. I have the same problem again once I start something that plays audio. It would take more than a minute for the program/video work. And why I think it's the audio that's because while trying to load something. I clicked on the volume icon in the taskbar and it does not load upward. Only when the audio begins to play it appears as usual.  And it takes more or less a minute.

  My problem is not just my video player. But everything needs its takes a long time for them to load. Whether in the internet, other programs and videos.

  Thank you for your help. I then turn to a professional. Thought I'd try here everything first.

• Interrupted the enclosure or usb-6229 during recording and performance data is now not viewable

  Hello

  I've been recording in Labview SignalExpress 2.5 using the usb-6229 BNC recorder. I was recording on 16 channels with a sampling frequency of 1 kHz over a period of at least 7 hours, while you can imagine a lot of data has been collected. Unfortunately, the power of the recorder was interrupted during recording (but not the PC running Signal Express) and although all the tdms files are present, they will not playback. When I drag the log on in the display area of data, I get the following error message:

  ' The selected journal is ready for posting. You must wait until the log has finished recording to view it".

  If I right click on the journal before sliding above, I get a list of options that is "making visible journal." If I select this, nothing happens at all. If I then right click again, the 'Make visible log' option disappeared. Drag the log on after this step still does not work.

  I recorded other newspapers of more than 7 hours that read perfectly well.

  If the log files be constantly updated during recording, so that if there is a failure of Rubio, the data are not lost?

  The most important thing first, but that is something so that I can play these logs back or are they gone for good? The .tdms file size match those of other file formats that play OK and have the same duration 7hr for registration.

  Thanks in advance

  Mike

  
  

• Audio dropout during playback I have timeline?

  I have

  iMac os x

  10.9.5 version

  Audio dropout during playback in timeline in cs6

  What is your source file type, rate and codec?

  What is your setting sequence?

• Photo Story 3 crashes when previewing recorded audio or while "Audio Mixer" during save

  I use Photo Story 3 on a 32-bit Windows 7 computer (I actually tested on several machines of Win7 32 (business & professional) of various brands & manufacturers).  All of the documentation I found said that Photo Story 3 SHOULD work.  As long as I do not use the microphone to record, that's fine, but if I do (and I NEED to), it crashes when I saw the clip or the finals of the registration phase "audio mixer".

  I followed all of the suggestions I found online.  I tried to run it in WinXP SP3 compatibility mode.  I tried to run it as an administrator.  I tried them both at the same time.  Nothing seems to work!  I even went as far as deleting (OK, deactivation) Windows Media Player & Center as a recommended person.  I use Setup PStory.msi setup program Setup.exe only installs a version of a limited use of the trial that I can't use.  FWIW, I tried the limited version that comes with the setup.exe and experienced the same problems!  Can anyone shed some light on this for me?

  Thanks for the suggestion. I have been in Event Viewer and took note of a conflict with a DivX codec installed last week. I uninstalled DIVX and rebooted.  It works fine now.

  Apparently I have a problem with a DIVX player/converter/CODEX had installed and has been using the video of movies at home.
  
  Thanks for the suggestion!  Solved!

• audio, from flow recorded during playback

  NOTE: I posted this same question on the page groups users of Adobe FMS.
  
  I use Stream.play () server to implement a hub to switch between broadcasts and recorded streams. Basically I have a live video feed that we want to spend in a recorded segment (flv) at the end which we go back to the live stream. Both the stream and the stream recorded are at the same speed of data.
  
  I'm following the examples of code from:
  
  http://livedocs.Adobe.com/flashmediaserver/3.0/hpdocs/help.HTML?content=00000386.html
  
  The problem I have is that the audio starts for the recorded segment but going silent after the first seconds of 2-3 audio. This happens whenever the clip is played. This clip plays very well when it is associated to directly, without being part of the system of hub using Stream.play (). I tried with several segments registered with the same result.
  
  Has anyone seen this happen before?

  OK... it turns out I was doing something wrong.

  In the above code, I was setting the param 'shortDemo' to false reset. So that this works, I'm application.mainStream (false) before this call. This forced the flow stop before playing the "shortDemo". This caused all sorts of problems listed above.

  To resolve this problem, I have the param to reset the value true for 'shortDemo' and removed the call stream (false). The results is that clips all will play them as planned today.

  Thanks a lot for your help/suggestions. It is appreciated.
  -michael

• Menu main movie Audio playback during the film

  Hi all

  Good evening

  I'm watching the X - men First Class movie, I bought a long time ago. Unfortunately, once that I touched READING the menu main iTunes film starts but continuous loop during the movie main menu theme music makes it impossible to hear the audio and enjoy the movie.

  I tried several options, nothing seems to work. Its as if he has 2 windows, 1 of the main menu and the 2nd movie, but I cannot close the main menu without closing the film.

  Any help would be appreciated.

  Kind regards

  No worries found a solution, I just selected the film only in my iTunes list, has not noticed it before. Just goes to the film without having to go through iTunes extra version.

• Background noise during recording on Equium A100-027

  My Audio cd plays very well and the sound quality is good.
  However, on the extraction of tracks and playing in Media Player, there is a background noise "to be carried".
  The same noise is generated when you use the keyboard with MacOS E - MU Proteus X 2 software.

  Is there an Audio driver problem when recording?
  Someone had a similar problem?
  I posted this before you try the new drivers out of this site: I'll report if it solves the problem
  Thank you

  Happy to know

• Tecra A8: audio stutters during playback of CD/DVD on Win2K

  We recently started having the laptop Tecra A8 and we run Win2K on them. Everything works well except during playback of CD audio or DVD. Audio stutters really bad (worse with DVD to CD).
  I tried to remove the silent acoustics and re - install the audio drivers but same problem.
  As a test, I put the WinXP preinstalled on one, and then there is no problem. May be driver related issue, but we do not have the best experiences using XP drivers on a Win2K machine.
  Any suggestions would be greatly appreciated.

  As far as I know on the Tecra A8 has been preloaded with a Realtek HD Audio driver.
  I guess you also need the same kind of audio driver for W2k.
  This unit uses a link high-definition audio, and I think you'll need driver that supports this chip.

  See the Toshiba driver for W2k drivers page. In addition if you don t use the Toshiba Recovery CD you need to install all the drivers of Toshiba in the right order. Please see the installation instructions and follow this guideline.

• MainStage retains "Copy Audio files" during save

  Hello

  MainStage guard do "Copy Audio files" then to save it. It copies the audio files temporarily in the concert file and removes them. I don't know why he started to do so. I tried to do a "save under" and set the options in different ways for the project to avoid this but these concerts have done the same thing: whenever I click Save starts copying files and can I have a coffee break.

  

  Any ideas how to get rid of this behavior?

  I saw a similar topic about the "save under"-it's "Save":

  MainStage 3.2.3 is copy audio when recording as files

  See you soon,.

  When I perform a "Save as", I get a bunch of boxes of digital resources to include or exclude from the backup. See the checkboxes in the gray box at the bottom of the screenshot below.  Leaving the "copy EX instruments in concert" box unchecked prevents MainStage to copy audio files (at least for me.)

  

  Good luck.

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/