Audio lost after plugging

I created a project with a creation of branch. On slide 7, the learner has one of two options, if they choose option 1, the Directorates-General of the project to slide 8 slide 30 breaks (that part works very well), if they choose option 2, the branches of project to slide 31, at that time the project loses audio. If I find out each slide in edit mode the audio works well, this problem arises when I discover the project.

Anyone seen this before? Anyone can understand how to solve? Thanks in advance for your help.

I continued on this troubleshooting. The original project was created with the previous version of Captivate. After the update to Captivate 2, I opened new project for adding additional slides. The slides where the audio didn't work on branching are the slides created with the previous version of Captivate.

I saved the project to another name. I exported the audio for each slide (slide 31-74) to my hardrive. Then, I deleted the audio for each slide and re-imported the audio from my hard drive to each slide.

This solves the problem. Thanks to everyone who looked at it.

Tags: Adobe Captivate

Similar Questions

  • Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

    Hello

    I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

    Any ideas?

    Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
    Then please provide more details on your laptop!

    I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

    After a long investigation, I found a solution here in the forum.
    First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
    Be sure to use the RIGHT driver sound after the new installation of Vista.
    Not all drivers are working!

  • Audio lost after the cell is located.

    I lose audio after I used the computer for a while. When I'm cold first boot, the audio works fine, but if I let the laptop sit for a while or surf with using audio, it stops working. If I do a restart, still no sound. I have to start cold, (turn off the computer and then press the button) for its return.

    QE dv7t-7000

    Windows 7 Home premium 64

    15 Firefox

    Explorrer IE 9

    Keith

    I think I found the problem, well well what was going on. When the power settings were to darken the screen, Beats Audio would go to power saving mode and when I went to use the computer again, the audio not come on again.

    I went to the rhythms of noise emissions, under the advanced screen, was a place to use the thigy for energy savings. I changed it to not allow the adjustment of power, work and have not had a problem. Now to know why when I used the computer, its not on again.

    Thanks for looking, hope this helps

    Keith

  • Audio lost after upgrading to Windows 7 on the dv2050us Pavilion

    I ran the windows Upgrade Advisor 7 and it says that my phone is compatible but I seem to have lost my sound. The laptop will play the startup chime when I turn on but that's all, so it must be possible to get sound to work, right? I ran all the on-board diagnostics and it says everything is working properly, but which is clearly not the case. Any help is appreciated.

    Here's my info:


    "HP Pavilion dv2050us notebook PC
    Serial number: {deleted private information}
    Product number: EZ718UA

    Try your audio driver for Vista to see if it helps:

    http://ftp.HP.com/pub/SoftPaq/sp35501-36000/sp35682.exe

  • Audio lost after buying first pro

    Hello

    I worked on a project using the trial version and when it came out I bought a license how some of my clips were marked offline. When I create a link to the media (never moved in the first place) I get an error as follows:

    Any idea what I can do to get my project back to usable state? The clips provide audio but first seems to completely ignore!

    TIA

    Marcin

    Clear your cache of media and the media cache database files, which will probably take care of that. Otherwise, rename the files that the media is and then re - connect.

    Neil

  • lost after upgrade to El capitan photos

    Help

    I lost priceless pictures of a loved one lost after updating my old OS to El Capitan.

    I now try to revive photos, hold the option key and select another photo library to see if this will bring my photos.

    I was using an old OS and when my iphone 5s was stollen over the weekend, I bought an iphone 6 when I plugged the new phone to put all of my previous settings and data on it said I have to upgrade my operating system to synchronize this phone.

    I hesitate to update the system, but did it anyway.

    then, when she opened the only pictures that remained on the computer are those that have been taken with my iphone or photos that come from the internet or social networks.

    I lost all my albums of photos taken with a canon ios device.

    These photos are not in time machine.

    How can the computer just delete the photos on its own... How does he choose what to keep and what to delete.

    Please help... I refuse to give up and accept that the computer can simply delete photos and videos.

    Take a look in your images folder and see if there is an iPhoto library.

    What OS did you spend.

  • How to get audio back after installation of Vista Service Pack 1 - help pages don't help do not

    I was prompted to install Vista Service Pack 1 and audio lost. I followed the microsoft help pages to uninstall the sound driver and reinstall by using the Device Manager. But after that uninstall the audio driver disappeared and did not automatically reinstall as described. How can I return the audio? Help!

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

    If the above does not work:

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    They will help you with your question in Vista Hardware and drivers Forum above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Latitude E5520 Audio problems after upgrade to win 10

    I have audio problems after upgrade to win 10 64-bit.

    Dell Latitude E5520 IDT 92HDxxx HD Audio
    Hardware ID:
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

    (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

    I would be happy to provide more information and help to debug.

    To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

    *************************************************************************
    Hello
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows. Check their documentation online with Dell Support, and
    drivers and ask questions in the forums about known problems. Make sure that you are
    Run the latest version of the BIOS, chipset and drivers.
    I hope this helps.
    *************************************************************************

    I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    Thank you
    John D.

    johnsdagg
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows.

    Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

    johnsdagg
    I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

    johnsdagg
    If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

  • My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

    Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

  • HP 15: Audio distorted after upgrade to Windows 10 Anniversary Edition

    Hey everybody,

    I just upgraded my laptop HP15 for Windows 10 Anniversary Edition. Now, I have distorted audio, is there something I can do to fix that?

    Thank you

    Bill

    @Bill_F

    After the upgrade to the anniversary edition the first thing I recommend is to update your drivers and software via Windows Update and HP Support Assistant.

    For some specific models of HP, there may be difficulties with audio destortion after update of the anniversary. Please see the following support document to see if your model in the series is in the list and the instructions to follow.

    Computers laptops HP 15 - xxxxx, 15g - xxxxx and 15 q - xxxxx - Audio is distorted when music or videos are played

    http://support.HP.com/us-en/document/c05289563

  • HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

    Hello

    WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

    Update driver BIOS update effective system is rebooted and the wifi does not.

    Please help me.

    In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

    Select the update that is dated from when you had the question.

    Click it to uninstall.

    You have to restart the laptop afterwards.

  • WiFi lost after winning 10 improvement on Satellite P745-S4217

    Help! WiFi lost after upgrading to windows on my SATELLITE of P745-S4217 10

    Drivers have installed successfully but when I troubleshoot, windows tells me wireless capability is turned off

    I search on the net, but still no solution to my wireless connection interruption

    Any help will be appreciated thanks

    Hello

    In the past, you need to turn on the WiFi using the FN keys, but I think that this should not be necessary to help to win 10.

    In any case, I think that you must connect to the laptop to the internet using LAN cable.
    Then, you must uninstall the WLan Device Manager driver.
    After that, restart the laptop in order to win 10 to select the Wlan driver automatically.

    As far as I know that Win 10 must check for new drivers available WLan and in the best of cases after the update, the WiFi connection should work again.

  • All my tabs are lost after downloading an add on. The tabs start showing my default homepage.

    All my tabs are lost after you download an add-on. The tabs start showing my default homepage. Do I have to have all closed tabs before you download an add-on Firefox? Even the site of add-on Firefox restarts as my default homepage. Is there an add-on to prevent that from happening?

    This has happened

    Each time Firefox opened

    Is always

    Diito. Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6. en-US; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6

  • Network is lost after stanby mode - Satellite M40

    I'm from Holland
    I have a Dug Satalite M40 - 170 for several times that the network connection is lost after sleep.
    What is the sollusion. OS = Windows XP prof.

    [Edited by: admin November 23 05 07:07]

    Hello

    My unit is also connected to the company LAN. You use very often stand-by and hibernation mode, but after the awakening of procedure the connection is establish again shortly after.

    Try disabling the network card for a just a few seconds and turn it back on. This option that you can find in tool ConfigFree.

    Good bye

  • How to get the drivers and files lost after you have reinstalled Windows XP

    Message: How to recover documents Word and Audio drivers after reinstalling Windows XP on the computer.

    Operating system: Windows XP

    Exactly how is that did you reinstall Windows.

    Your "reinstall Windows" had formatting of the disk (i.e., a "clean install") or restore the computer to its state of "cost-of-the-factory '?  If so, your documents and other files are essentially disappeared (possibly recoverable at great expense by using a Drive Savers).

    If you don't reformat or use a "recovery partition" (that is, you did a "repair" install), then it is possible that your data may be recoverable.  More you continue to use the computer, however, over the likelihood that the data is unrecoverable.

Maybe you are looking for