Audio of Sonido Volumen built-in reproduciendo Silencio device little reproduccion finger

Similar Questions

• Config Audio y Sonido

  Por favor Necesito UN Ayuda! Problema de config from Audio y Sonido.Gracias.Nora.

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

  Hola

  Han pedido knew pregunta en version in English of the Microsoft Community. Please select su idioma preferido, c, haga click in el boton "cambio Región" in the lower part the pantalla izquierda. Ahora pedir pregunta, otra vez.

  Gracias.

• I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers.

  I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!

  Hello

  Troubleshooting with the monitor speakers sound problems

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01289551&LC=en&cc=us&DLC=en&product=3770742

  Also try to update the drivers of his last.

  I hope this helps.

• audio is launched from the beginning of the song little matter where I click in the movie timeline to start playing?

  I need the audio to help the photo calendar synchronization. However, no matter where I start playback to check a second time when a certain image, audio ALWAYS starts again from the beginning of the song! How can I stop this?

  Since you have posted in a forum XP... I'm guessing that you're
  using Movie Maker 2.1?

  If you drag the playback indicator (vertical line with square
  at the top... Rest the pointer on the square and drag)...
  the music should start playuing.

  Unlike the video track... you can click left/make dragging clips
  the audio left and right. And you can change the
  duration of a single photo on the timeline manually. Move
  your pointer autour in border of an element until you see a
  double red arrow. Now drag the double red arrow... you'll
  display a ToolTip that shows the evolution of life.

  Articles that offer information about audio sync with the video

  "Collections of projects".
  http://www.Papajohn.org/newsletters/024-Collections.html

  Study the rendering of DV - AVI files
  http://www.Papajohn.org/newsletters/048-StudyDV.html

  Editing film 'Basics '.
  http://www.Papajohn.org/newsletters/139-EditingBasics.html

• Kernel audio mixer wave - error 39. Says the device is not found. Have no sound. Where can I get a driver download to fix?

  Currently have no sound.  Have Windows XP - svc pack 3 is installed.  When I try to update the driver, I get message that there are no.  I can't find a driver download install on the Microsoft Web site.  Help!

  Re post by giving the number of brand, the name and model of your machine.

  Or go to the homepage of the manufacturer and download the latest audio drivers for your unit from there.
  See you soon,.
  Jerry

• Audio has stopped work on disabling Remote Desktop device Redirector Bus.

  What is a remote desktop device redirector bus? First of all, I have a laptop. Second, after you turn off the equipment my audio stopped working in services. This hardware driver is Microsoft. My concern is why my audio hardware requires remote redirection as that on behalf of disabled bus? On further investigation, Dell has a bus Director. Not a bus "redirector".

  Hello Newman,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. why you have disabled hardware?

  2 do you have remote sessions enabled on the computer, or you are using Remote Desktop Services for any purpose?

  3. when exactly you receive the error message?

  Please respond to this answer we will be happy to help you.

  Thank you.

• Peripheral audio HP pavilion dv2000 does not appear in Device Manager

  I have a strange problem in my hp pavilion dv2000

  I had windows 7 for some reason any I downgraded to xp...

  I installed all the drivers, including sound... but its something strange, I have sound when I restart it will, or sometimes even I shut down the computer and not reopen after awhile, still no sound... when I have the sound I can see conexant hd audio 221... When I do not have the sound I can't see conexant hd audio 221 how can I solve this...

  I hope you got my problem...

  Edit: this is my id sound cards: HdAudModel, HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000

  and this is my first post

  resolved... in the file of audio driver conexant hd I opened th id .ini file changing with my own id uninstall conexant restart the computer and then force the installation of the ini file... and it fixed my problem

• After you disable the built-in webcam, imaging devices disappeared from the Device Manager. How can I make it reappear if I can activate my webcam?

  Hello

  After you disable the webcam integrated my laptop ASUS N80V, imaging devices disappeared from the Device Manager.  I use Windows Vista x 64.  How can I make it reappear if I can activate my webcam?
  Thank you
  Chris

  First try a system restore to a date that precedes you disabled the camera, it could allow the camera back.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Try reinstalling the camera driver. On my previous Asus link there is a click to download on that link. You must communicate your model number or click on 'Auto-Detection model '.

  There is also a forum on the Asus Support link, you can try to ask your questions here.

  You can also try the update of the BIOS available on the download link and then check if the unit is on.
  BIOS update guide for ASUS laptops
  http://Forum.NotebookReview.com/ASUS/174395-BIOS-update-Guide-ASUS-Notebooks.html

  Take note of the setting warn in red text.

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• NB200 - how to integrate the audio drivers for Windows XP Home edition?

  Can you give me an idea for my Toshiba NB200 guy.

  I use nlite and don't create addons for my realtek (audiodriver) but it no chance that the installation is not successful.

  Toshiba has a software to create an audio driver windows xp built-in?

  Thanks in advance...

  Toshiba does not provide any software to integrate the drivers, but Toshiba provided software to create the own recovery disk (or recovery media)
  The creator called pre-installed software Toshiba Recovery Media (disk beginning) created the recovery disc to install the image of Toshiba.

  But this software was available on laptops with preinstalled system. He of not ready for download.

  However, I used nLite repeatedly in the past and never had serious problems to add additional drivers to my Win XP system.
  I have created my new installation disc and added all Win XP Service Packs.

• Problems with the Firewire Audio Interfaces

  I use a Presonus Firebox for all of my recording and playback. I just bought a new pc HP with Vista64 and I had problems with my audio since then. Symptoms include random audio dropouts, crackling sounds when you scroll through the menus in my software, no noise at all from windows media, no windows generally sound player. Everything works sometimes, but inevitably fails. Once the audio is de-energized my only solution is to restart the computer, and then it still doesn't work sometimes. I don't understand. My last computer was a couple of years and built the hand. It worked perfectly with this unit until the motherboard is dead after what I bought my new HP desktop with terrible results. The main difference between my pc and this one is that I was using XP and XP64. However, I have the right drivers for the home and the computer recognizes it but I can't operate consistantly and correctly. This new HP has more power than my last, and more then enough power for my needs recording software. I would like to know, I've been recording music on PC for 8 years. Any advice would be welcome.

  I am now convinced that the long nightmare is finally over. I tested my home over and over again with no failures. Record and playback midi seem to work perfectly. Here's what I did:
  
  1 optimized my computer for audio streaming using the guide written by sweetwater.com.
  
  2 uninstall all the drivers from Presonus and all software, including the removal of all PreSonus files on the registry using the instructions provided by the technical support of PreSonus.
  
  3 disabled WLAN and then physically disconnected from the motherboard.
  
  4. my computer has two firewire ports. The front port was connected to the motherboard via a short cable. I physically unplugged the cable from the motherboard.
  
  5. I bought an Express(1x) PCI firewire 400 card with a Texas Instruments chipset. The exact brand is inner Pro PCI Express(1x) 4 port 1394 a. The firewire card is a power port. I plugged the power jack on the same line, connected to the DVD player. I don't know if it's important, but I'll try to document EXACTLY what I did. The firewire card requires no driver work. It came with a disc with a B.S. video editing software I was not installed.
  
  6. I turned on my computer and disabled the built-in firewire in Device Manager, leaving only the new active firewire card.
  
  7. I installed the drivers from the Firebox from the original disc supplied with my unit (v1.20.0). I had good results from these pilots in the past that may be because I use XPsp2.
  
  8. I have connected the combustion chamber when prompted to by the installation software.
  
  9. rebooted the computer with the combustion chamber connected and everything's fine.
  
  By the way:
  
  The inner firewire card cost me $ 30.00
  
  My computer specs are:
  HP a6745f desktop
  Dual core AMD 5050e 2.6 GHz
  XP sp2
  GigsRAM 4 (3.25 because I'm on XP)
  
  If you are confused in the store on the question of whether a firewire card uses a Texas Instruments chipset. Try to get a glance at the map. You should see a chip bearing the logo of TI: the State of Texas, w / Ti. YeeeeeeeHawwwww!

• Qosmio G30: Option unavailable SPDIF in the Audio properties

  Qosmio G30, SigmaTel HD Audio Codec, running XP 2

  I'm looking for audio signal through the built in coaxial to the GPA. No signal. When I go to sounds and Audio devices > advanced > Volume Control Panel /Properties there is no cursor for spdif badette, in the list of things to show in the advanced Panel, or a way to put in operation. Similarly, in sign of SigmaTel there no option to route via spdif.

  In addition, the advanced controls is grayed out in the Volume Control Panel.

  What did I miss? I can't for the life of understand me why there is no signal nor any how to activate spdif in this machine.

  In addition, in the Media control Devices Properties box, it is this list:
  (MCI) Audio CD
  (MCI) Microsoft Video for Windows
  Midi sequencer (MCI)
  Sound (MCI)
  mciqtz32.dll

  Who say that they are functioning normally. Any ideas why I can't find the spdif option?

  Thanks in advance.

  Hello

  The SPDIF socket is supported on the Qosmio G30. It s the same taken as the headphone jack.
  To use this SPDIF you must connect the audio amp with the laptop via a special SPDIF cable.

  What you could do is to start the DirectX using the command; Dxdiag

  There you can check if the SPDIF is available or not.

• His monitor with built-in speakers

  Hello
  I have an Optiquest Q7 monitor with built-in speakers.  I used to get a sound from the built-in speakers with my XP computer.  I recently upgraded to a computer with Vista 64 bit.  However, I no longer get sound through the built-in speakers.  I tried to sound in the control panel and disabled the exclusive mode in the Advanced Options tab.  Any thoughts on what may be the problem?
  Thanks in advance,
  Eco

  Hi EaswarS,

  Welcome to the Microsoft Answers site!

  First check if the internal PC speaker has by default.

  1. click on Start, type Sound in the search field and select Sound from the list when it becomes available

  2. check that the device audio speakers is set as the default device and is activated

  NOTE: If the audio peripheral speakers isn't in the list, right-click anywhere on the playback of the Audio window tab, then select options Show disconnected devices and Show disabled devices .

  3. If the sound from speakers option is disabled, right click on speakersand then select Activate .

  The sound should now be restored. If the device audio speakers still does not work properly, check if the audio device is enabled in the Device Manager.

  Step 2: Check if the audio device is enabled in the Device Manager

  If there is no sound from the speakers, follow the steps below to determine the State of the sound hardware in Device Manager.

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on audio, video and game controllers to expand the list of audio devices installed on the computer.

  4. determine if the audio device in question is enabled or disabled.

  ·         If an arrow appears on the volume icon, the audio device is disabled. Go to the audio driver update.

  ·          If a down arrow is not displayed on the volume icon, the audio device is turned on. Go to verify that the audio device is enabled in the Device Manager.

  5. right click on the name of the audio device and then click Activate. If the problem persists, then follow step 6.

  6. right click on the device name, select Propertiesand then displays the message in the device status field. The device status field contains either:

  A message that contains most troubleshooting for your specific device information.

  Or

  A message indicating that the device is functioning properly.

  Step 3: Install an updated audio driver

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on sound, video and game in the Device Manager window controllers.

  3. right click on the name of the audio device listed under sound, video and game controllersand then click Update driver software.

  You can also visit the manufacturer's Web site and download the latest 64 bit Vista compatible drivers.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Inspiron 15 type jack and audio jack?

  Hello

  I use Dell Inspiron 3542-4627, and I'm about to buy a new helmet. Since my laptop has a single input for microphone and headphone jack, and most of the helmets separated inputs microphone and headphones, I really need to know what type of audio from my laptop. How can I know if my laptop has TAKEN or TRS jack socket? I need to know this so I can get 2xTRS to JACK or 2xTRS to the TRS separator?

  Thank you in advance.

  See you soon.

  joa1101

  2xTRS PLUG or TRS separator 2xTRS

  2 x TRS of DECISION-MAKING. Any combo headphone plug is TAKEN, because the headphones stereo need 2 contacts, the mono microphone needs one, and it needs common ground, for a total of 4 contacts.

  Struggling combo assume that a helmet combo (type smart phone) will be used with it. I think that the thought is that most people just want to make communications with their laptops, and that people who are serious about audio will get outboard audio interfaces for their audio needs of high quality.

  You can try traditional computer headphones with a splitter, but we have received reports of mixture on dispatchers, with more people saying that they are not only working people who have had success. An alternative to a separator is an input jack usb audio. Those who provide ports separated for the microphone and headphones are cheap on Amazon and elsewhere, and may not be of the best quality. USB plugs have their own ADC and DAC, and thus a separate audio system of the built-in notebook Realtek audio systems.