Unable to get any audio from webcams built in mic

Similar Questions

• Cannot install x 86 kb2729450. Cannot find the installation on the microsoft Web site. Unable to get any help from Microsoft, if it is valid. I have window xp OS

  I have Windows xp OS.  Installation is underway for about a week. Don't know if the installation is a valid installation of Microsoft.  Ran a virus/malware scan etc. and negative.

  Hi John,.

  Thanks for posting in the Microsoft Community.

  I understand that you can not install kb2729450.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2 are you able to install other updates to windows correctly?

  3 did you changes to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I suggest you of for windows update issues, visit the link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35692

  See also:

  MS12-074: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 13 November 2012

  http://support.Microsoft.com/kb/2729450

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• OATS: Error Message 'Unable to get a connection from the browser' on the record

  Hello
  
  I am involved in the control of the operation for application Siebel 8.1, with the OATS 9.3 tool.
  
  Trying to save, an Error Message * "unable to get a connection from the browser. You want to continue to wait for the browser load? "* appears, even if InstallBrowserHelpers has been installed.
  I tried to uninstall the 'BrowserHelpers' and re - install but the question remains.
  
  your response on this will be appreciated.
  
  Thank you!

  Try to uninstall everything that touches on OATS to your PC then re - install. Uninstall steps are in this forum. You can search for it. Work around the error can take a long time.

  Concerning
  CP

• I have my Toshiba computer connected to my TV via HDMI. Video works fine, but I can't get any audio.

  I have my t.v. from tom toshiba satellite connected via an hdmi cable. Internet and work video grat. I can't get the audio signal to the TV.

  Hello

  To add a bit to the excellent advice of RajithR:

  You can check with the help of Toshiba, their documentation online and ask in their forums
  on the problems known.

  How to activate Audio via HDMI
  http://www.MyToshiba.com.au/support/items/FAQ/316

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  With the help of PC Audio on HDMI
  http://www.brighthub.com/computing/hardware/articles/27727.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to get any discussion on the Virus &amp; Spyware forum.

  I don't know if I have a problem with this forum or what is wrong. I didn't get any new discussion forum "Virus & Spyware" on July 17. I read on the forum every day. Please advise for any suggestion.

  More and more,.

  Nothing is wrong with your system... it of quiet here... anyone post something again.

• Unable to get reasonable audio rendering, using denoiser and associated tools or effects

  Hello world

  New to hearing but understand tooling.

  The problem I have is a video production of big wedding with about 40 cases. The first two are of the ceremony. First file I could find enough noise in a quite space in the file with no song so I could tweak the settings that offer a far better file. The second file is pulled from a distance in the Church and the noise is really extreme. The Minister speaks throughout the queue and any open place in the file is small, that is not giving an impression of sound very good to use the file to reduce the noise. I tried noise reduction 36 several times, but the results are the same. Minister sounds like he's under water for use description of someone else. Also tried equalizer to boost the channels from the Center but still very poor. I know that some will say audio shoot correctly the first time with a proper microphone. They're right. I used my Cam Panasonic X 920 and before next event will use a Rode. As I read that will help only a little.

  Don't know what else to offer to the question, but any help will be appreciated. Watched many tutorials to see if I can get help, but all tutorials using hearing have a nice clean open to use as a sample.

  Thanks in advance!

  Kind regards

  Bob

  Good, some general thoughts since we have not heard of your audio files.

  First of all, don't expect miracles.  Hearing did a great job of noise reduction, but sometimes the records may be just too bad to be saved.

  Now... to try and get the best out of it...

  Don't try to make your noise reduction in a single great pass.  Which can result in artifacts 'under the water' you mention.  Instead, take a sample of the noise and run reduction 10 or a reduction of 15% and 10 dB.  Increase the size of the FFT (in the Advanced menu), take another impression of noise, then make another run at low concentrations.  Continue until you have used the higher the FFT size.  (And means, sometimes you have to start with a higher than default FFT.)

  However, from your description of the really distant MIC, NR maybe not the best tool anyway.  It might be useful to experiment with tools in spectral frequency display and manually drawing around the 'bad' bits and reduce or EQ them.  It won't be quick or easy, but sometimes it can make the difference between 'give up' and 'intelligibility '.

  For certain other types of noise, there is a Remover tool... I have a hunch, it's not what you want (even when not having heard your stuff from source), but it is interesting to watch the tutorial and have a play.

  Good luck.

• Suddenly unable to get any sound on AOL.

  All of a sudden I can not any sound on AOL.  How should I do?  I clicked on the icon of audio (lower-right on the desktop) and click on mixer but did not find anything abnormal.  Clicked on aol and sounds found on its default with windows.  When I test it, it sounds, but that's the extent of it.  Power off this Board and back to AOL, I still get no sound.  Help if possible.

  Hello

  Since it is linked to your AOL, it must be part of your settings for the software. Search for solutions, see: http://canada.aol.com/help_files/canada_help9/Communicating_Online/Expressing_Yourself/Changing_AOL_Sounds.htm Best of Luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I don't get any audio except DIVX streaming video

  It used to work fine, but for over a period of 8 months now, I have no sound with streaming videos. I have no problem playing the videos that I downloaded. I sometimes audio streaming from a DIVX as MegaVideo site.

  This has happened

  Each time Firefox opened

  Is about 8 months ago

  Hi Rosa
  It's wonderful! So glad you got to the bottom of the problem! Best wishes, Jane

• I don't get any notification from Facebook on my Macbook.

  I have the Facebook account set up in my settings and notifications is turned on, but I never received a notice from Facebook on my Macbook. I've been on El Capitan since it was published. I don't remember, but I do not think that Facebook notifications on Yosemite no longer worked. All other notifications work fine. I tried to delete the Facebook account and add it again, she who has not corrected. Thoughts?

  Update: remove and re-add the account Facebook actually solve the problem. For some reason, notifications has not started to come through immediately, but now I get them. So... If anyone else has this problem, try this fix first and see if it helps.

• Need help. Unable to get the newspaper from the administrator to install new hardrive.

  My brother-in-law brother set a password on the computer of my brother mother. Now, he can't remember the password. She is looking for a receovery disk so I can install a new hard drive. Any ideas to get around the password. Oh Yes. He is the only Director. What should I do? It's a HP Pavilion Slimline with Vista home edition. I have no password reset disk recovery disk, etc. I have a crick w/o a paddle.

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  ___________________________________________________________

  Here are the different ways to reinstall Vista

  Contact HP and ask them to send you in vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With a HP machine, press F11 at startup to start the recovery process to factory settings

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Unable to get any code to display HTML content to work in my application

  Help, please! I am new to Java and BlackBerry development and that you must create an application for my work. I'm stuck on I invoke a browser. I tried the code from the development guide, as well as the BlackBerry and BlackBerry Advanced beginning books. Everything else seems to work fine except for something to do with a browser.

  Copy the following code:

  package BrowserFieldDemo;

  Import net.rim.device.api.browser.field2.BrowserField;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class BrowserFieldDemo extends UiApplication
      
  {
  Public Shared Sub main (String [] args)
  {
  BrowserFieldDemo app = new BrowserFieldDemo();
  app.enterEventDispatcher ();
  }
      
  public BrowserFieldDemo()
          
  {
  pushScreen (new BrowserFieldDemoScreen());
  }
  class BrowserFieldDemoScreen extends screen
  {
  public BrowserFieldDemoScreen()
  {
  BrowserField myBrowserField = new BrowserField();
  Add (myBrowserField);
  myBrowserField.requestContent ("http://m.youranswerplace.org");
  }
  }
  }

  gives the error "error starting BrwoserFieldDemo: Module 'net_rim_bb_browser_field2_api' not found.

  This is a simulator of 8230.

  I have other examples. The actual application that I do is supposed to bring to the browser inside, but nothing happens. No errors and no site. I tried on a direct phone (curve).

  Any help at all would be so appreciated!

  Thank you!!!

  Thanks, but I have now. It's ugly, but at least I now have a starting point. Thanks a lot for your help!

• I get no audio from a saved windows movie maker file/windows xp

  I have no problem to connect my dv camcorder or no problem editing. Audio works while editing and preview, only after I have save the project that there is no audio data

  Try to save your project to AVI video format.
  and see if there is an improvement.

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Unable to hear any sound from the speakers

  I have windows vista. My dual processor dell can play movies, but cannot read audio CDs, audio tests, all windows sounds, etc.

  Hi tomwturner,

  What is the number and the model of the computer?

  Run the diagnostic tests following that helps diagnose and solve the problems of audio playback, then check the issue. To do this, please see the link below:

  http://support.Microsoft.com/GP/NO_SOUND?EntryPoint=WHHT

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.