Audio Realtek: code 10? Device cannot start.

Similar Questions

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• No Internet! Windows 7 Realtek PCIE Ethernet (CODE 10) "device cannot start?

  I have no internet connection at all. I desperately need help. I read a lot of questions on the subject up a network and running and general network issues, but none have been equalled my question. I seem to have a "Code 10" error saying that my ethernet controller "device cannot start." I'll force the uninstall and let windows reinstall them, and they do not. I have uninstall/install the force and they fail. Disable/re-inabling does not work. The RJ45 port only flashes every now and then 6 times in a row in an orange color. I don't know what to do. I am running windows 7 hp 64 bit. I have not had this problem before, and the internet worked on this machine. It seems that I booted up once and I had this problem since. I'm wired to the rear of the at & t linksys router so I don't know why it does not recognize the connection. When I leave the system to diagnose the problem, it says "RTL 8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) knows driver or hardware related issues.»

  Thanks in advance for the help.

  Hi, I had simiar issues mentioned in my post above, everythying was working fine one day, then the day I started the PC and had no ethernet... I tried to do a CLR CMOS to try to reset the BIOS where he had gotten corrupted, it has not helped.

  However I havee been downloaded the file most recent BIOS my mobo manufacturer and cela flashed to the computer and it restored my connection to the local network.

  I hope this can be useful for you.

• Code 10 device cannot start after Windows update.

  Original title: had this application update 26509 operation message

  I hope that I chose the right place for this question

  By PAD so I give you all the unusual things that have occurrred recently

  When I clicked shut off (to turn off the computer) last night I received a message something like this but this isn't verbaitim.

  -apply the updates do not turn off or disable... Let him go was not a thing then it shuts

  This morning from my computer (windows 7) I see a lot of numbers flight by update of something... Finally he stayed still long enough to read this message

  ' application operation update 26509 26509 (\Registry\Mach...) . who took about 90 dry

  then the screen changed to say prepare to set up windows (while I was getting a large piece of paper to write it down in my computer I went back to what is normal for my computer open) he says treatment auto - VGA - the screen is black for 2 seconds and my office is open and functional.

  --------

  Please lmk if I should post this separately if it is not part of the above problem

  OK not to confuse things and maybe it's not bad but I will also attach additional information... Thank you for your patience.

  Sometimes messages arrive on my screen and went so fast that I don't know what they said and that's what's happening all I saw were collected WAN miniport (ATW) #2. and something that affects the usuage of my computer... I went to the Device Manager and under "Network card" was a green line to see, I opened 2 inputs was the first

  "Intel (R) 82578 DC Gigabite Network Connection" under properties it says that this device does not work correctly

  the second entry "WAN Miniport (ATW) #2 * was a yellow triangle with a point of exclamation and under properties say this device cannot start (Code 10) .

  I'll wait on this case its not important right now with my orogonal above problem

  Thanks again for you time and patience... looking forward to your entry

  Learning to 62 (aka granny)

  Hello

  1. have you successfully install the update?

  2. are you able to connect to the desktop without any problem?

  Was the message you saw before Windows starts, the system applying these updates. This is a normal procedure that Windows takes above all the critical updates are applied. If you were not able to start Windows, then we might have a problem with Windows update.

  Regarding your second yellow exclamation on the wide area network WAN miniport, you need to update the driver for the network adapter.

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the network adapter.

  I suggest you run the automated FIXIT from the link below and.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I would say as update you the driver for network card and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

  Hey!

  Let me first, I use a laptop Aspire V3 - 772g.

  After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset my PC' delete all files) - that didn't really solve my problem, so I used Rufus with an iso of Windows Microsoft to remove all partitions and start 10 REALLY cool. Since then, the laptop runs like a dream - in all but a point.

  It seems that no matter WHAT I do, I can't get my audio HDMI / TV to appear as an option in the playback devices (Yes, disabled devices is checked). Looking in the Device Manager, the high definition Audio Device has an exclamation point is to launch a code 10 - impossible to start the device. I tried to uninstall it, tried to install all the drivers of Intel V3 - 772 f page including chipset, updated my graphics driver / Realtek / drivers Intel HD audio... and yet, nothing. Ran /sfc, ran /chkdsk, nothing.

  I read something that made me believe .NET framework can be part of the issue - and in fact, I have a bit of difficulty getting the 3.5 installed / functional, but I finally did... and yet, nothing!

  Seriously, I'm losing my mind. I'll have to run my sound surround sound via an auxiliary cable into the laptop, which is sacrilege and a fraction of the quality.

  If there is SOMETHING, someone can suggest beyond the foregoing, please do!

  This problem is related to Intel HD audio via HDMI cable, if the driver is in the same package of graphics drivers.

  Have you tried to manually install the audio driver HD?

  you need to unpack the Intel graphics drivers (but no installation, you can use 7z to unzip), and then select update the driver HD audio from the Device Manager and point to the unzipped folder.

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• No its "No. Audio Device" IDT High Definition Audio CODEC. (The device cannot start code 10) location 65535 internal high definition audio

  I need help.  suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".

  What can I do? really appreciate some good advice on how to fix or how to get it fixed.

  I need help.  suddenly I have no sound. the error I got was "no audio device" Microsoft Fix it Center found problem but did not set. Just says "problems with noise and acoustics. No sound"but the situation is"not fixed ".

  What can I do? really appreciate some good advice on how to fix or how to get it fixed.

  I would appreciate if you visit this web site.

  http://support.Microsoft.com/kb/943104

  Answer please, if you face any problem.

  K M JAI Support general (INDIA)

• HP 8440p: Audio device high definition - device cannot start (Code 10)

  I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

  Device Manager indicates that "this device cannot start (Code 10)"

  Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

  Details tab - value = device high definition Audio

  Tab events - (information)

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

  

  Any guidance is appreciated.

  Hi @JS2045

  The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

  I looked around for a driver W10 to the hardware ID you have published and fails.

  This device is necessary unless you want or need audio via the port display.

  The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

  Download, but do not work with this graphics driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

  Download and install this free utility for files.  64-bit is the second listed file.

  http://www.7-zip.org/

  After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

  Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

  Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

  If this driver audio works on W10, I don't know.

  But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• not his vostro1720, xp pro, IDT HD audio codec, device cannot start code 10

  update of XP pro and now no sound.

  device cannot start code 10

  any suggestions?

  Hello. You can try to cancel the changes with the Windows system restore, but generally if it was a Windows Update then it cannot Ωtre annulΘe. Go to start > all programs > Accessories > system tools > system restore
  and check the box "restore my computer to an earlier time."  Choose a date before the update.

  If it does not then try to install the IDT audio driver for Vostro 1720.

• No audio (this device cannot start. Code 10) on the D630

  Hello

  I have Windows XP with SP2. Fresh installation, the laptop is new and I have problems

  with my audio device (this device cannot start. (Code 10). From the BIOS, I have after I have Sigmatel 9205

  audio device.

  I have updated the bios to A07, chipset, and later installed audio driver of dell does site already whith no results.

  Suggest what I need to do more?

  10 X,

  ADI

  
  

• My sound card does not work after working yesterday. "This device cannot start. (Code 10) »

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  OZNalex wrote:

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  Hello

  First do a hard reset.

  Please go through this Hotfix from Microsoft for the error you are getting.

  Please uninstall & update audio driver & BIOS after checking, you have such version specified in the site pilot here on the website of the HP product . Reboot after that. Do the troubleshooting in the Microsoft Fix document.

  When you're done, shut down the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key ESC that you start the computer to launch the Start Menu, and then select F10 to open the BIOS menu.  Press F5 to load the default values (sometimes it's F9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press F10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Check if its working

  Thank you

• The Philips SPA5210 bar: this device cannot start. (Code 10)

  Hi all

  I have a brand new Philips Soundbar which does not work.  Running Windows 7 Professional 64 bit and try to use the audio driver generic usb (which is what suggests Philips).  I get the dreaded "this device cannot start. (Code 10) "error.

  This unit works very well on my Linux box, so I know that its hardware functional.  If anyone can help with this?

  Thank you very much

  Brian

  
  

  Hi Brian Matheson,.

  It is possible that the Soundbar is perhaps not compatible with Windows 7 64 bit operating system.

  Check out the link here and open the user manual where it does not list Windows 7 in system requirements.

  If it works, try the step below and check out them.

  1. click on Control Panel.

  2. double-click on the sounds and Audio devices icon.

  3. in sounds and Audio devices

  1 properties, select the Audio tab.

  2. under sound playback, select Philips SPA5210.

  If the previous step fails, then try to connect to it on the other USB port and check.

  If you have Windows 7 32 bit on another PC, check if the Soundbar works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Headset (headphones and microphone) USB - this device cannot start - Code 10

  Hello

  I just bought a USB headset today and tried to use it.  I had a driver error message when first plugged in.  The help system has proved to be unnecessary.

  After doing some research on this forum, I checked the Device Manager and found that the indicatses of properties of USB audio device "this device cannot start. (Code 10) ".  Forum entries suggests that a lot of people have similar problems.

  Mine is a new installation of 64-bit Windows 7 on a new hard drive, but on older hardware of the PC - Asus A8N SLI Premium.  Someone at - it had suggestions as to the resolution of the problem.  Note that a normal headset worked fine yesterday (but I broke it) plugged into the jack Sockets, but I wanted to use a USB headset to avoid having to continue to go to the back of the computer to replace my system 2.1 speakers.

  Thank you

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link below and check if it can help solve your problem.

  http://support.Microsoft.com/kb/943104

  Please reply back and let us know the status of the issue.

  Azam - Microsoft technical support.