Audio recorder based on the Web in Flash

Similar Questions

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Computer hangs when the video display based on the web

  I use Windows Vista.   When I view the videos on the web, I sometimes my computer crash.  It happens intermittently, perhaps one out of every 10 times I discovered a video and occurs with IE8 and Firefox.  I reinstalled the Flash player as it seemed at the time when it crashes flash videos of base.   Just before the crash to computer, I get a bunch of lines on the screen.  Video files and DVD that is not based on the web seems to play fine

  Hello
   
  1. do you remember any change before the question?
  2. What if the problem occurs on a particular Web site?
   
  Follow the steps below and see if they help.
   
  Step 1:
   
  I suggest you to disable the auto restart in case of system error and try to take note of the error message and reply with the exact error message. Once we have the exact error message that we will be in a better position to determine the exact nature of the problem and fix it.
   
  Follow the steps below to disable automatic restart on system failure:
   
  a. Click Start.
  b. type system in the search box after clicking on start. Choose system from the list of results.
  Note: If you see the classic view of the Control Panel, you will not see this link. Just double-click on the system icon and go to step d.
  c. click on the system link.
  d. in the left pane, click Advanced system settings.
  e. Locate the startup and recovery area and click on the settings button.
  f. in the startup and recovery window, locate and uncheck the box next to automatically restart.
  g. click OK in the startup and recovery window.
  h. click OK in the System Properties window.
   
  You can now close the system window.
   
  Subsequently, when the computer is lorsque l' ordinateur s' arrete stop the computer restarts automatically and you will receive the error message, make a note of it and post back.
   
  You can also open the event viewer and check if there are other significant error messages/codes. See the link below for more details:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Step 2:
   
  If you don't have to update your display drivers yet, I suggest you Update your display drivers and check if the crash stops.
  Step 3:
  I suggest you put your computer in a clean boot State, and check if the problem persists. I suspect that there could be involvement of third-party software.
  Note: Follow step 7 to your computer as usual.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• App problem based on the Web on the process

  Hi all

  AIX 6.1

  11.2.0.3

  We have a new application based on the web, put in work, by changing the old system.

  We have only 100 users who can simultaneously connected, and our process of db is set to 120.

  But we met often too can mistake Treaty which we met in the previous system.

  It seems that the process are left behind when the disconnection of users or disconnected from the new web-based application.,.

  Is it possible that I can to check which processes are orphaned? And how do I auto cleaning/kill them?

  Oracle 11g has proc stored to manage this questions?

  Thank you very much

  zxy

  You say you have a web-based application.  Which implies that it is a three-tier application?  If, therefore, normally, middle-tier servers maintain pools of connections.  If this is the case, you wouldn't think that a session is created each time a user connected to the application, or that a session ended whenever a user logged out of the application.  At best, the connections of killing the middle tier has opened in the connection pool would cause problems of application performance.  At worst, you cause the application being unusable.  You could certainly do things like create profiles that limit a user can have how many sessions, how long those sessions can be slowed down, etc.  But in doing so for a three-tier application would generally strongly discouraged.

  With regard to the question of if you can change PROCESSES affecting dynamically...

  Oracle documentation is available at

  http://Tahiti.Oracle.com

  Once you're there, choose the documentation for your version of Oracle

  Online Oracle Database Documentation 11g Release 2 (11.2)

  Go to the reference

  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/TOC.htm

  Now, either search METHODS or access the initialization parameters section to find the parameter page

  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams200.htm#i1132608

  As with all other initialization settings, should be recorded the editable attribute.

  Justin

• WRT350N configuration based on the web does not load on the cable port.

  I've had this router for over 6 months, and only in the last two weeks, I could not access the configuration page based on the web through my PC, connected to one of the 4 wired ports. None of the laptops I tried (Win XP, Vista) are connected via Wi - Fi without a problem. Obviously, this isn't an emergency, because I can access it through the laptop, but I use mostly my PC to manage the router.

  Any ideas on other things to check?

  Thanks for the tip, but that did not work... However, trying to fix another problem, with the USB port of a storage drive, I re-load the updated firmware and am now able to access the configuration page. Still no action on the USB key if!

  Thanks again!

• Link URL in BB7, BB10 devices control? (for applications based on the web)

  Context:

  -App companies (customers are members of staff)

  -App is based on the web - no hybrid or native application but a URL

  -URL is located within the company's intranet

  Question:

  Is it possible to order this URL on BB7 10 devices? For example:

  1. drag the URL as a logo on the screen of the device (like apps look)

  2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)

  Thanks in advance!

  Leyden

  I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:

  http://docs.BlackBerry.com/en/developers/deliverables/12029/Push_applications_for_the_BlackBerry_Ent...

  This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-create-a-URL-launching-AP...

• Software based on the Web so that customers can change the templates directly to print?

  Hi all

  I'm trying to find a piece of software based on the web I saw in action but do not know what's it called, or even what to look for to find!

  I saw him at a print shop, and essentially, it was a system where society print put up a model/s for their clients (ie the brochures) and each time the customer needs a new brochure that they can open an online session, input text and images (limited by the rules of the model), they get a screen on evidence then confirmed when he's going all right to print.

  Anyone any idea what this software can be?

  Maybe it's a custom interface that you wouldn't be able to buy.  As much as I know Adobe has no what anyone who allows for processing and interaction online focus on electronic commerce.

• How to convert project based on the web/flash flex AIR project

  I created a new project using Flex Builder 3. When he was asked to select the type of application, I choose the web application (ie, run using flash). Now I also want to make the application as a desktop application (i.e. based on air demand), is there a way to export or convert my existing application based on flash to become an AIR-based application?
  
  In general, it is possible to switch between applications based on flash and focused application on AIR on the fly, i.e. without creating a new project and by copying all the files to the new project.

  I don't think you can do it on the fly. Usually create us new AIR and copy paste the code.
  I hope this helps.

• utility based on the Web shows again the old version of the firmware - HELP PLEASE

  In September of last year, I replaced my old Linksys with a new (BEFSR41 ver 4.3).  I started to get in trouble yesterday, so I consulted the web-based utility and noticed that the window says: the firmware 2.0 version!

  I tried to update to the latest firmware available for my model, following the instructions on the site but something went wrong and the firmware has been altered. Finally, I managed to update the firmware via tftp utility, and he said that the upgrade has gone through. But the utility still shows the version of the firmware 2.0.  Under the router > status reads as follows:

  Capture (share.field_33_UI_share) Firmware Version: 2.00.4 build 7, January 20, 2010

  I am very confused. Which is the latest firmware or I get it confused with the 4.3 version number?

  I really hesitate to update the firmware again after the problems I had the first time.  If anyone can give me some advice on what to do, I would really appreciate it.

  You confuse the hardware version of the router with the version of the firmware.

  The BEFSR41 is the model. One physical versions of this model. Each version contains a different material. The exact hardware version is printed on the label under the router.

  The firmware version is the version of the firmware (software) running on the router. It is important that the firmware used is compatible with the hardware version of the router. For this reason, you must select the correct hardware on the router Linksys support download site version to be sure to choose the right firmware compatible with your router.

  The latest version of the firmware of the BEFSR41 v4.3 is Ver.2.00.4 Build 7. You have the latest firmware.

• WRT 54 G configuration based on the web page problem

  Hello.

  When I enter the Setup page for my WRT 54 G web-based, it looks like this.

  

  I want to update my firmware, but it's a little difficult with the configuration page that looks like this.

  Any ideas anyone?

  Try to delete the browser cookies, files and see if it works.

  You want to update the firmware of the router.

  Download the latest firmware from the site Web of Linksys and save it to your computer.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Cycle of the router and see if you can open the page complete the installation of the router.

  If you are still not able to open the page in correct configuration of the router then you can try to upgrade the firmware using the tftp.exe file.

  Go to the Web from Linksys website. Select the model of router BEFW11S4 and version 3.2. You will find the file of the installation wizard to download. Download the Wizard installation file and save it to your computer.

  Now you have 2 files on your computer. one is the last file of the firmware on your router and the other is the Setup Wizard.

  Run the file from the Setup Computer Wizard. In the server box, type the IP address of your router 192.168.1.1. Type the password of your router. You will find the Browse button. Click the Browse button and locate the firmware file and click upgrade.

  It will start to upgrade the firmware of your router.

  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• What type of e-mail accounts are NOT based on the web?

  Many web sites offer an option to contact them by e-mail. When I click on their link with them by e-mail, a box pops up saying there is no email associated with this program and I need to create an association in the default programs control panel. When I go on this Panel, it has no option to use a specific e-mail program. There is a generic option to use your current default e-mail program, but it does not work. I mainly use Yahoo as my email client, but a guy said tech web-based email will not work. What other types of e-mail work? When I had Vista and previous versions, when you went on a website and clicked on their link with them by email, you automatically had Outlook open. Now I just get the pain in the end to end box that opens as I've described before. Can someone help here? I run Windows 7 Home Premium.

  All e-mail accounts are Web-based. The difference is what allows you to get your mail. A program like Outlook or Windows Mail is an email client, and that's what looking for your error message. Yahoo's Webmail and in most cases, Webmail can be done by default. It is a solution that might work for you.
   
  How can I make Yahoo! Mail my default email application?
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html

• Retention of records based on the end of the calendar year

  Content using WebCenter 11 g and Records Management, I'm looking for a way to create a rule of provision based on the end of a calendar year.  For example, the rule might wait two years after the end of the calendar year in which the content item has been published.  Does anyone know how to do this?  I'm looking for something that is easy to maintain, but right now my best option is to create a metadata field to end of calendar year and then do a little iDoc script to set point which is archived for each content.  I would really like to avoid this if possible.  Any ideas?

  I think what you're trying to do is to "synchronize on the period start date.  It is part of the definition of the trigger.

  http://docs.oracle.com/cd/E21764_01/doc.1111/e10640/e01_interface.htm#RMDSG620.

  Assuming that the trigger is based on the release date:

  -An item is activated in June 30, 2016.

  -After the date of recording, wait two years.  This makes the eligible trigger on June 30, 2018.

  - But you want to wait until the end of 2018 to make available.

  -Check the above mentioned framework would force alienation to fire on January 1, 2019, instead of June 30, 2018.

• Delete records based on the foreign keys of oracle 11 g

  I have a requirement to remove the records from the tables in the order according to

  the existing foreign keys.

  I for example, the following tables and the pk, fk constraints:

  create table one

  (aa number (1),)

  descr varchar2 (20));

  ALTER table one

  Add constraint a_pk key (aa) primary;

  create table b

  (aa number (1),)

  descr varchar2 (20));

  ALTER table b

  Add constraint b_pk key (aa) primary;

  create table c

  (aa number (1),)

  descr varchar2 (20));

  ALTER table c

  Add constraint c_pk key (aa) primary;

  create table a2

  (aa number (2),)

  id_aa number (1).

  descr varchar2 (20));

  ALTER table a2

  Add constraint a2_pk key (aa) primary;

  ALTER table a2

  Add constraint a2_fk foreign key (id_aa)

  references a (aa);

  create table b2

  (aa number (2),)

  id_aa number (1).

  descr varchar2 (20));

  ALTER table b2

  Add constraint b2_pk key (aa) primary;

  ALTER table b2

  Add constraint b2_fk foreign key (id_aa)

  references b (aa);

  create table z

  (aa number (3),)

  id_aa number (1).

  id_bb number (1).

  descr varchar (20));

  ALTER table z

  Add constraint z_pk key (aa) primary;

  ALTER table z

  Add constraint z_fk1 foreign key (id_aa)

  references a (aa);

  ALTER table z

  Add constraint z_fk2 foreign key (id_bb)

  references b (aa);

  So, I want to choose the names of the tables in such an order so as

  deleting records will succeed...

  I built the following sql query (using the recursive subquery factoring):

  [p]

  with q (r_constraint_name, table_name, constraint_name, lvl) as

  (select table_name, constraint_name, r_constraint_name 1 lvl

  from user_constraints one

  where a.constraint_type = 'P '.

  Union of all the

  Select b.table_name b.constraint_name, b.r_constraint_name, q.lvl + 1 lvl

  from user_constraints b

  Join q

  on (q.constraint_name = b.r_constraint_name)

  where b.constraint_type = 'R '.

  )

  Select f.table_name, f.constraint_name, f.r_constraint_name, f.lvl

  q f

  [/ p]

  I want the results as the following list:

  Table-name

  ----------------

  B2

  A2

  Z

  A

  B

  C

  The table - B2, A2, Z - (in any order) must first referred in the list

  because they are based on the other three tables - A, B, C. Thus, in order to remove the

  A, B, C table records the B2, A2, table Z records must be beleted first.

  The query I posted above has the problem that it displays tables A2, B2 twice

  (1 because they have a pk and 2 because they have fk referring A, B relatively tables).

  Is there a solution for this problem?

  Note: I use db11g v2

  I wrote not all relationships of tables user_constraints (only argument constraint_name = r_constraint_name)

  Thank you

  SIM

  I have a requirement to remove the records from the tables in the order according to

  the existing foreign keys.

  . . .

  The table - B2, A2, Z - (in any order) must first referred in the list

  because they are based on the other three tables - A, B, C. Thus, in order to remove the

  A, B, C table records the B2, A2, table Z records must be beleted first.

  Is there a solution for this problem?

  Yes - the 'solution' is to use ON DELETE CASCADE, as appropriate or write a procedure that removes tables in the proper order.

  The solution is NOT to try to use dynamic sql statements to do so.

  You already know the good parent/child relationships. Simply create a procedure that uses the correct order.

  Analyses are necessary in any case to determine the proper order AND press the appropriate values to use to remove the appropriate lines

  Your DDL for tables and constraints must be in a version control system

  Update the procedure when / if new constraints or tables are added to the application

  IMHO, you must use dynamic SQL NOT to try to adjust automatically if a new constraint appears. New constraints should not appear by accident - they appear ONLY as part of a well planned release.

• Poller DB to select records based on the timestamp

  Hi all

  I want select records from the coloumn timestamp where the timestamp is older than an hour. Is it possible to do this through poller db? I tried but unable to pass the dynamic value (currently - 1 hr)

  Thanks in advance!

  Eventually create a view based on the timestamp and singled out the dbpoller view.