Audit success events, unknown logon?

Similar Questions

• How can I hide submit them and disable button "on success" event for question slides?

  Hello

  I use the "successful" event on the question slides to show a caption for the image and text and a button of smart shape to allow the user to continue to his own time to the next question.  The problem is I can't hide submit and clear buttons and I cannot conceal their with a smart shape...

  Does anyone have advice?

  Thank you!

  It's just the way by default that work all the Captivate questionnaire slides.  The default slide elements of questionnaire, including the "submit" button and the Clear button, are always at the level of the top layer, no matter what YOU add to the slide.

  My suggestion would be that maybe you should consider using the actions on the success or on the last attempt to go to a different slide in total BEFORE then go to the next question quiz.  Then you can do what you want on this non-quiz slide.

• Why the LMS reports a criterion for success of 'Unknown' for a quiz that I don't see?

  Hello

  I use 6 Captivate to create a course in which there are three components, a demo, a test and a trial. I have only configured the test click on boxes to "include in Quiz". Also, I put my preferences of quiz as shown below.

  So basically our client wants an incomplete-> Pass/Fail report with the chess game going on 80% (which I did in the section "Pass or fail" Quiz preferences)

  

  I test my results in the SCORM clouds and they are as follows:

  When I click through my test passing, SCORM Cloud reports

  Completion status: "complete."

  Success: "past."

  Note: "97.8%.

  However, when I take the test and try intentionally to fail, I get:

  Completion status: 'incomplete'.

  Success: 'unknown'.

  Note: '44,28%'.

  What I can't understand, why is "unknown"? Should not have been "failed"? So I created a small project a fake slide with six boxes. Each of them to be included in the quiz (so each box is 16.67%) value when clicked and set a pass mark of 80%. I tested on SCORM Cloud he omitted intentionally and got what I expected.

  

  Completion status: 'incomplete'.

  Success: 'failed'.

  Note: '44,28%'.

  So why this did not work in my main course? What could be causing the LMS did not know that I failed the Quiz and save the success as 'Unknown' field? Summer try this for a while now and can't understand this. Appreciate any kind of help that I can get here.

  Thank you

  Sean

  There is not a "State of success" in SCORM 1.2.

  There is really no way to know what your LMS uses to determine/display a "success" of failure.

  Captivate objective sets failed in this line, with the 'fail' which was held in the strSCORMStatus variable.

  SCORM_CallLMSSetValue ("cmi.objectives" + intObjectiveIndex + ".status", strSCORMStatus) & blnResult;

  This sets the objective status based on the lesson_status and shuod define the objective status to 'incomplete', so the lesson_status is "incomplete".

  I think that technically if the completion status is 'incomplete', it is impossible to know what would be successful because the LMS think that marked interactions were not yet complete.

• Facial recognition on Qosmio x 300 may not register well as audit success

  Hello

  Just got my computer laptop-Qosmx300-13W. Had problems with the fingerprint reader in that it would not even go. Uninstalled and installed the latest version of Toshiba download page... s everything works now.

  The problem now is with facial recognition. I can access the registry page, register successfully and the face is successfully verified. a new form appears. It has my username (but not name, said only: '-') and my computer name. Initially, there are two additional fields, "Password" and "Confirm password". The confirmation password field appears for a split second, then disappears. So, you can enter a password, but not a password for confirmation.

  The OK button has a blue box around it. Using the software as it was of the recovery partition, when I click on 'ok' it gives me an error indicating that the confirmation password is not correct. I tried the update of the drivers\software from the download from Toshiba site today but I still see the same behavior that only now is worse in the sense that when I click on 'ok' as opposed to a message telling me the password is incorrect, I get on a string error access violation. More information can be provided if required please do not hesitate to ask.

  Any help would be much appreciated.

  Experience of Toshiba's not going too well I'm afraid: two s has neither worked on the box... then again it is common with most businesses so hope still it can be solved.

  Thanks in advance (ps. I prefer to be contacted by email, [email protected] if it appeal to you can moderators let this address here, I understand that leaving the addresses may lead to get spam in my Inbox, that's a risk I'm willing to take. (Thank you).

  Here's an update for someone else who could have this problem.

  Seems the facial recognition is in conflict with the extra finger print scanner another question... it seems that facial recognition does not work when my user account is a single administrator account...

  After posting my initial post, I went and created a test account. I then tried the registration process for the admin account and all crossed only instead of passwords requested that my fingerprints (I have the fingerprint reader enabled). Once who has been entered, everything is ok. However at the time wherever I deleted the test registration face recognition account began to play up again. That said the account that has already been registered works very well.

  My advice to anyone else in this situation is to create a test windows account. Try to record again. If successful removal of the test account and you're done.

• Audition records in unknown fonts?

  I had to install hearing (3.0) to my laptop while Desktop problems are addressed. I extract tracks from audio CDs and save WAV to mp3 files to save space on the iPod. (Books on CD have such amazingly horrible sound that there is, for all practical purposes, no loss!)

  When I drag .mp3 files to the iPod, and also when I play in Windows Media Player, the file names appear as characters outline box and tildes. Look around discovered that the titles of files (properties/summary) have the same number and type of characters, no doubt, who represents the same illegible characters. iPod and Windows Media of course use these titles as their range names.

  I inadvertently did something weird to the program or am I just missing a font? (but why this information is not in a system font...)

  More in detail below, for all those needing.

  TIA

  Molly

  The simple view of the Summary window for MP3 has editable for the title and comments - the other lines are grayed out. Nothing is editable in the Summary window for WAV files.

  Here is the procedure: I extracted all tracks into one file, cut the ends ('change CD' etc.) and save in Windows PCM WAV file (which I always did). I select about one-third of tracks (with the function ' snap' if the securities are accurate) at a time and save each selection to an MP3 file named something like Book01_01 (.mp3 added programmatically).

  This computer is running XP with service pack 2 more updates. I'm saving up for an external - has always been with the office too - tried recording on the C: drive of the laptop - makes no difference. The damaged computer has been much fantasy and was on Vista, even if it worked. I never had the problem. I was given Premiere Pro (CS3) with the computer (could not stomach then bought Soundbooth hearing) so it was bridge and probably a bunch of fonts and I can't guess what else installed.

  Since this is a temporary installation, and I have remote access, I have not updated the hearing.

  If things weird police that happens, it will not be caused by the hearing, that's for sure. There is actually anything with fonts (and not files) at all.

  Usually, the way to change the metadata of an MP3 file (which is what actually reads this another software/hardware) is to do before creating the MP3 at all. In the edit view, go to file > file Info and in the names of text fields, select the MP3 ID3 tag. Then enter the info you really want an MP3 title and artist, and then save the MP3 (or selection). When you play it in anything you want, you should get the correct information.

  Well, you certainly do with Windows Media Player, but because I don't have one of those iPod things, I can't confirm whether or not this meets the actual specification of MP3 ID3 part. I would have thought that if it does not, however, you would have heard about it now...

• I need to learn more about an event in the Security Audit log

  Here's an audit trail that we see.  I need to know more about this event and what it means.  This is a Windows 2003 server.

  In particular:

  -How do I determine who or what is: primary logon ID: (0x0, 0x3E7)

  -How to determine what work or article is the GUID: C:\WINDOWS\Tasks\User_Feed_Synchronization-{F9ACF166-98DF-45BB-8F33-86CB4DD8A279}.job

  Thank you.

  Event type: Success Audit

  Event source: security

  Event category: object access

  Event ID: 560

  Date: 18/06/2011

  Time: 22:14

  User: NT AUTHORITY\SYSTEM

  Computer: ABCWEBA04

  Description:

  Object open:

  Object server: security

  Object type: file

  Object name: C:\WINDOWS\Tasks\User_Feed_Synchronization-{F9ACF166-98DF-45BB-8F33-86CB4DD8A279}.job

  Manage IDS: 2828

  Operation ID: {0,1576635}

  Process ID: 876

  Image file name: C:\WINDOWS\system32\svchost.exe

  User principal name: ABCWEBA04$

  Main domain: ABCRX

  Primary login ID: (0x0, 0x3E7)

  Client user name: -.

  Client domain: -.

  Customer login ID: -.

  Access: READ_CONTROL

  SYNCHRONIZE

  WriteData (or AddFile)

  AppendData (or add subdirectory or create instance of channel)

  WriteEA

  ReadAttributes

  WriteAttributes

  Privileges: -.

  Restricted Sid Count: 0

  Access mask: 0 x 120196

  Hi Mike7211,

  The question you posted would be better suited in the TechNet Forums, resources for computer scientists. Please visit the link below to repost your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Thank you!

• Could not find ' Logon Type: 2 ' has no field PC logon event

  We have hundred pieces of domain logon and on the domain controller audit policy has been activated as below.  But the windows event log, I can't find an interactive logon failure (ID = 4625 and logon type = 2).

  Audit account logon events - success/failure
  Account - success/failure of the audit management
  Component directory service access - check failed
  Audit logon events - success/failure
  Audit access to the - success/failure
  Audit policy change - success/failure
  Use of the privilege--failure to audit
  Audit system events - success/failure
  Treatment follow-up - no verification audit

  When I try to check the logon failed myself in the local event viewer, I found that it is n/a in respect of the security.

  

  Any idea on this?  Is my journal of bad criteria for filtering or any changes to the system requirements?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to report your query in the TechNet forums to get appropriate response of experts familiar with this topic.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Opening of anonymous logon Type 3 in Event Viewer Security log

  I am running Windows 7 Professional, all Windows updates current and Kaspersky Internet Security installed.

  I have reviewed the security logs in Event Viewer and have noticed many cases of successful NULL SID LOGON Type 3 ANONYMOUS logons.

  Log name: security
  Source: Microsoft-Windows-security-auditing
  Date: 16/02/2015 14:16:48
  Event ID: 4624
  Task category: logon
  Level: Information
  Keywords: Audit success
  User: n/a
  Computer: PC
  Description:
  An account has been connected successfully.

  Object:
  Security ID: NULL SID
  Account name: -.
  Account domain: -.
  Logon ID: 0x0

  Logon type: 3

  New logon:
  Security ID: ANONYMOUS logon
  Account name: ANONYMOUS logon
  Account domain: NT AUTHORITY
  Login ID: 0x1dd9a
  Logon GUID: {00000000-0000-0000-0000-000000000000}

  Process information:
  Process ID: 0 x 0
  Process name: -.

  Network information:
  Name of the workstation:
  Source network address: -.
  Source port: -.

  Detailed authentication information:
  Logon process: NtLmSsp
  Authentication package: NTLM
  Transited Services: -.
  Package Name (NTLM only): NTLM V1
  Key length: 0

  
     
      4624
      0
      0
      12544
      0
      0 x 8020000000000000
     
      40400
     
     
      Security
      PC
     
   
   
      S 1-0-0
      -
      -
      0 x 0
      S-1-5-7
      ANONYMOUS LOGON
      NT AUTHORITY
      0x1dd9a
      3
      NtLmSsp
      NTLM
     
     
      {00000000-0000-0000-0000-000000000000}
      -
      NTLM V1
      0
      0 x 0
      -
      -
      -
   
  

  It's me serious concern. This means that an unauthorized user has installed access remote asteroid Trojan or malware on my system? How can I fix this and prevent subsequent instances of what's going on? Thank you for your contribution to this issue.

  Hi Patrick,

  Thanks for posting your query in Microsoft Community.

  According to the description, it seems to be a problem with the remote of a web of computer resource access as it is connected to internet or malware/virus infection.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Anonymous logon suspicious in Event Viewer

  I see a couple of these safety Event Viewer logs in my computer connected to the domain:

  Log name: security
  Source: Microsoft-Windows-security-auditing
  Date: 08/11/2014 06:54:52
  Event ID: 4624
  Task category: logon
  Level: Information
  Keywords: Audit success
  User: n/a
  Computer: 1K7RGX1
  Description:
  An account has been connected successfully.

  Object:
  Security ID: NULL SID
  Account name: -.
  Account domain: -.
  Logon ID: 0x0

  Logon type: 3

  New logon:
  Security ID: ANONYMOUS logon
  Account name: ANONYMOUS logon
  Account domain: NT AUTHORITY
  Login ID: 0x2f261
  Logon GUID: {00000000-0000-0000-0000-000000000000}

  Process information:
  Process ID: 0 x 0
  Process name: -.

  Network information:
  Name of the workstation:
  Source network address: -.
  Source port: -.

  Detailed authentication information:
  Logon process: NtLmSsp
  Authentication package: NTLM
  Transited Services: -.
  Package Name (NTLM only): NTLM V1
  Key length: 0

  This event is generated when a session is created. It is generated on the computer that was consulted.

  The fields of the object indicate the account on the local system that requested the opening of session. It is more often a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.

  The logon type field indicates the type of logon that occurred. The most common types are 2 (interactive) and 3 (network).

  The new session fields indicate the account for which the new logon was created, which is the account that was logged.

  The network fields indicate where source opening of remote session request. Workstation name is not always available and may be left blank in some cases.

  The authentication information fields provide detailed information on this specific logon request.
  -Connection GUID is a unique identifier that can be used to correlate this event with a KDC event.
  -Transit services indicate which intermediate services participated in this logon request.
  -Name of the package indicates what auxiliary Protocol was used among the NTLM protocols.
  -Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

  Some of them bear the name of the listed computer, some of them do not. I did not except the default administrative shares, shared folders. I don't share printers and 'file and printer sharing' are disabled in my Advanced settings network. Where do I get these? They are really suspect.

  Hey Kevin,

  Thanks for posting your query in Microsoft Community.

  The description of the question, I understand you are facing a problem with Windows 7 security and your computer is connected to the domain.

  I suggest you post your query in the TechNet forums to get help.

  Follow the link below for the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home

  If you need more help, please do not hesitate to contact us.

• Termination of IPSEC Services and anonymous logon

  Ending IPSEC Services

  , I receive the following event in the log to start. I also have a message of success for a logon by ANONYMOUS. I realize that this account peut be an issue of access network system using the (intentionally by MS?) Scary ID of ANONYMOUS but I am concerned about the fact that it could be something nasty.

  Details

  Product: Windows Operating System

  ID: 7023

  Source: Service Control Manager

  Version: 5.2

  Symbolic name: EVENT_SERVICE_EXIT_FAILED

  Message: The %1 service is stopped with the following error:

  %2

      

  Explanation

  The specified service has stopped unexpectedly with the error specified in the message. The service closed safely.

   

      

  User action

  To fix the error:

  Check the error information displayed in the message.

  To view error WIN32_EXIT_CODE SCM met, at the command prompt, type

  SC query service name

  The displayed information can help you troubleshoot the possible causes of the error.
  I tried every combo of syntax, that I can think of, but I can't this query to run.
  I got up and down from behind firewall router firewall protection more live Superantispyware more live Winpatrol and regularly scan with Malwarebytes and Microsoft Security Essentials. Secunia PSI keep an eye on the status of my programs. In this case, I ran additional full scans with all that I have more than 3 online scanners known.  All say CLEAN but I still get these messages. BTW account 'Guest' is disabled.
  
  
  Any help please?
  
  

  Hello

  Have you made changes on the computer before this problem?

  The following articles could be useful.
  IPSec tools and settings
  http://TechNet.Microsoft.com/en-us/library/cc738298%28WS.10%29.aspx
  IPSec troubleshooting tools
  http://TechNet.Microsoft.com/en-us/library/cc784300%28WS.10%29.aspx

• Event log issues...

  So im going through my event log to try to understand a blue screen I got recently, and I had a few questions about things I stumbled on in the case log...

  The first is what is IPSec and the IKE and AuthIP entered services modules strategy service agent?

  and on the other hand...

  "Security," it lists these "Audit success".

  In detail, it lists the user as "N/A"? Should I be worried?

  Hello

  Strategy IPSec IKE and AuthIP are all connected and used for internet security and computer security peer and authentication.
  The IKEEXT service hosts the Internet Key Exchange (IKE) and Authenticated Internet Protocol () AuthIP modules overlay. These input modules are used for authentication and key exchange in Internet Protocol security (IPsec). Stopping or disabling the IKEEXT service will disable IKE and AuthIP key with peer computers Exchange. IPsec is typically configured to use IKE and AuthIP; Therefore, stopping or disabling the IKEEXT service might cause IPsec to fail and compromise the security of the system. It is strongly recommended that you have the IKEEXT service operation.
  Internet Protocol security (IPsec) supports to the peer network level authentication, data origin authentication, data integrity, confidentiality (encryption) data and anti-replay protection.  This service apply IPsec policies created through the IP Security Policies snap-in or the command line tool "netsh ipsec '.  If you stop this service, you may experience network connectivity issues if your policy requires that connections use IPsec.  In addition, remote management of the firewall Windows is not available when the service is stopped.
  These two paragraphs were taken from descriptions of services of each of them.
  The system of audits to ensure that they work very well.
  You have run scans with your anti-virus or MSE?
  I hope this helps.
  Jim

• vCenter 4 & SQL with authentication Windows - errors in the event log

  I worked on a new installation of SQL 2005 & vCenter 4 and chose to follow the guidelines of good practice and have the configuration of authentication Windows for the DSN and vCenter services.  After a few small problems, I have everything works fine, however there are a lot of Application events generated on SQL Server as follows:

  Event type: Failure Audit

  Event source: MSSQLSERVER

  Event category: (4)

  Event ID: 18456

  Date: 10/20/2009

  Time: 14:17:48

  User: NT AUTHORITY\ANONYMOUS LOGON

  Computer: SQL03

  Description:

  Failed to connect to the user 'NT AUTHORITY\ANONYMOUS LOGON'. CUSTOMER: x.x.x.x

  For more information, see Help and Support Center at http://go.Microsoft.com/fwlink/events.asp .

  Data:

  0000: 18 48 00 00 0e 00 00 00

  0008: 00 00 00 44 00 43 00 0D

  0010: 53 00 56 00 50 00 57 00

  0018: 00 53 00 51 00 4 c 00 4 d

  0020: 30 00 33 00 00 00 07 00

  0028: 00 00 6 D 00 61 00 73 00... m.a.s.

  0030: 74 00 65 00 72 00 00 00 t.e.r...

  It does not appear to pose any real problems, but I don't want my fill with these Application event logs and ideally I want to go to the bottom of him so I know nothings actually bad before it prepares for production.

  I know that this was a mistake that has been received (similar in any case) when you don't have your SQL Server set to mixed authentication & attempted to use SQL to your DSN account, but do not know what it is now.

  Any help appreciated.

  Doug.

  OK - managed to solve my problem by solving another...

  Noticed that graphs of Performance seen in vCenter threw an error - restarted the Management Services Web service on the server vCenter vCenter, solved the graphics Perf error and stopped SQL event logs generated too.

  Doug.

• Audit failure.

  You use Microsoft Baseline Security Scan, I received information about the failure of the Audit. Event ID is 615, category is the change in policy, is the Source of security. How can I fix it?

  Hello

  The question you have posted is related to Microsoft Baseline Security and would be better suited in security forums. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/MBSA

• display a success message on a Web page based on a validation in a java class

  Hi all

  I'm stuck at a fundamental question. I do form validations in an adf application. I am able to print the error messages via ValidatorExceptions on the Web page, whenever a validation fails. But in the case of a successful event, for example change of password scenario, when the password is changed, I need to show the user a message of success for the success of the event and provide a link to the home page.

  How is it possible, without having to switch between the pop-up windows using switcher.

  Any ideas or pointers greatly appreciated.

  PS: I use version 11.1 of Jdev

  Thanks in advance.

  Hello

  You can insert html tags in the text of the message in the java source code.

  Look at this example:

  public void addMessage()

  {

  String html ='"Select link: http://www.google.com------" > Google";

  FacesMessage fm = new FacesMessage (FacesMessage.SEVERITY_INFO, html, null);

  FacesContext.getCurrentInstance () .addMessage (null, fm);

  }

  RFH.

• MovieClip event

  Forum, it sounds simple but does not work for me. I have a clip (point_mc), which is contained in another video clip (main_mc). I'm trying to get point_mc respond to a click without success event. In the main timeline that contains main_mc, I have the code such as:
  
  main_mc.point_mc.onRelease = function() {}
  trace ("clicked");
  }
  
  Thank you
  
  
  

  jgn2006,

  If this is your code...

  main_mc.point_mc.onRelease = function() {}
  trace ("clicked");
  }

  ... and if two video clips were properly given, instance names
  then either main_mc is already programmed to manage his own mouse
  event (s) that could mute any event mouse for the internal clip - or
  the preceding code, ActionScript is not attached to a frame able to 'see' the
  clip from main_mc. Or maybe you are publishing for Flash Player 5, which does not
  yet support this style of event management.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."