Audoaccess format with Clip

Similar Questions

• Make a movie with clips of 1080 and 4 k sources

  Hi all

  If I do a movie with clips of 1080 p sources (like my iPhone 6) and 4 k sources (like my GoPro) I'll still be able to export the animation to quality 4 k? Is there something specific I need to do to keep export k 4 option in iMovie available i.e. the order I add clips in the project, etc.? Will be 1080 p "blasts upward" clips at 4 k resolution?

  Thank you for your help.

  Miles

  10.1.2 iMovie will use the size of the first element that you add to your project to determine the format of the exported movie.

  See Help: http://help.apple.com/imovie/mac/10.1/#/move6ccb3330

  The resolution and the frame rate of your movie project are determined by the first clip you add to the timeline. iMovie now supports 4 K video and image rates at 30 frames per second (fps). If you want your project to be set at 4K resolution, the first clip you add to the timeline should be a clip of 4K. If you want your project to be set to 60 fps, the first clip you add to the timeline should be a clip of 60 frames per second.

• A model of Mac Book 4.1 can be formatted with OSX 10.5.8?

  A model of Mac Book 4.1 can be formatted with OSX 10.5.8?

  Yes, if it's done with the original computer discs or DVD 10.5.6 or 10.5.4 detail.

  (144793)

• Problems of formatting with Satellite P25 2 GB SD card

  Dear members,

  Although I spent hours looking for an answer to the question above without success, I felt that I had to ask him once more. So, it's here (and sorry if this has been asked and answered already, maybe someone can tell me the right thread...).

  I have a laptop Toshiba P25-S5093, that was my serve. I bought it new over 4 years ago. Recently, I decided to take advantage of the embedded in my laptop SD card reader/writer. I bought a * _regular_ * SanDisk SD 2 GB (* not the HD - SD format *) and when I plug it in, I see the SD blue LED lights momentarily on my keyboard. I can even see that the _laptop reads the correct capacity of the card_ when I right click the icon. However, the system says that the card is not formatted and ask me if I want to format.

  Then, when I'm using the Toshiba format utility to format, it hangs for 2-3 minutes (I see the led Flash SD LED blue) and gives me the following error message:

  * TOSSDFMT: Unexpected error! Error code = 0x0340FF00

  I tried the quick format and a full format, with no success whatsoever. I exchanged for another 2GB SanDisk memory card, still the same problem.

  I downloaded the last SD formatting utility from Toshiba Web site (the latest utility driver looks old, it still 2003) and always without success.
  _Toshiba SD Card Format Utility Windows XP/2000 (v2.01.0; 09/09/2003; 1.75 M) _

  What is so intriguing is that both cards SD I've tried in vain on my Toshiba laptop, * work a lot on my brand new laptop working from another manufacturer *. * These cards are also fully recognized by my Canon or Fuji digital camera *.

  * If I use a USB card reader adapter, these cards are recognized by my laptop. This seems to point to a problem with the built-in SD slot or Toshiba driver / or Windows XP? *

  Notice to lovers? What gives?
  Thank you

  PS: or as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so. Can someone explain to me * what are these BT stacks for * and how they align with what I have built-in hardware terms. Batteries BT BT "ready" but * no match *. I downloaded the following, but my virus detection was not happy with this file:
  _Toshiba Bluetooth Stack for Windows XP/2000 (v4.00.36 (T); 28/04/2006; 26.56 M) _

  David

  First P25 appears to be a mobile American, designed only for the American market.
  If you need information in this series, visit the Toshiba site us.

  One question; You are sure that the 2 GB SD cards are compatible and supported at 100%?
  Seems too large is not supported!

  > as a bonus question, what is happening with the warning of 'ready' or 'equipped' Bluetooth? I thought I had Bluetooth in my laptop, but I guess that's not so

  Did you find a Bluetooth label on the bottom of the unit?
  If not then this laptop has not built into the BT adapter!

  > Batteries BT would amount to BT "ready" but not equipped.
  Yes, a lot of series is not delivered with the BT module but can be improved!

• Error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.

  Original title: what is NTFS?
  When you try to do a full up, I get the error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS.  My OS is Windows Vista Ultimate Edition.

  What is NTFS?

  What type of disc to I use to make a backup?

  Hi Heather_604,

  There are two ways you can do: you can convert the external hard drive to NTFS, or you can format the external hard drive to NTFS.

  Personally, I suggest that you format the external hard drive, but this will remove all data from the drive. Temporarily, you can copy what is on the hard drive on your C: drive if you have enough free space (or DVD) - once the external hard drive is formatted NTFS, you can copy everything back.

  Formatting disks and drives
   http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Examine everything under view all. also check How can I add a new HDD? If Vista not recognize the external drive in see computer management - disk, the link create and format a hard disk partition management:

  Create and format a hard disk partition
   http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  If you want to convert the external hard drive to NTFS, see the link in my original answer and:

  Convert a FAT32 to NTFS disk in Windows Vista
   http://News.Softpedia.com/news/convert-a-FAT32-disk-to-NTFS-in-Windows-Vista-51792.shtml

  Converting an external hard drive to NTFS
  (see r. v. White second after correction of typo in his post punch)
   http://Forum.Soft32.com/Windows/convert-external-hard-drive-NTFS-ftopict341077.html

  If you convert the drive to NTFS, I always recommend that you copy the existing data, as I described for the formatting of the disk, just in case...

  Kind regards

• External hard drive formatted with Linux OS

  The external hard drive can be seen in devices and tested as working properly, but not seen in a different folder on my computer, can not be opened. In addition, the system says that all drivers are installed.

  The drive is formatted with a Linux file system, probably ext3 or ext4.  Assuming that there are no files that you want to, you must delete all partitions, repartition the disk, and then the NTFS format.   These operations are done on disk management.  You can access by right-clicking on computer and select manage or control panel, administrative tools, computer management - Storage / Disk Management.

  Be careful!  Make sure that you work with the right drive. Right click on the drive to see the options.

  Note also, sometimes, these operations do not work through a USB adapter and it may be necessary to connect the SATA hard drive.

• How can I open a. Photo of the NAVE (Nikon D3S raw format) with Lr 6?

  How can I open a. Photo of the NAVE (Nikon D3S raw format) with Lr 6?

  Hi bollardière,.

  Please see How to transfer photos to a folder from the hard drive to Photoshop Lightroom and How to transfer photos from a camera or card reader to Photoshop Lightroom

  Nikon D3s is supported in this version of Lightroom.

  You should be able to directly import the. Image of nave to Lightroom.

  If you get an error message, post here with the screenshot of Lightroom Import window.

  Kind regards

  Assani

• formats with alpha channels

  Some of our projects created by Adobe AIR to video with alpha channel. We can create impressive effects with it. Is there something format with channel alpha we can change FLV?

  It is quite critical for us. There is only one option - previous version using Media Encoder?

  Been to another video format that support alpha channels? I know non-compressed MOV can do it, but the very large output files.

  If you need FLV files, then use the previous version of Adobe Media Encoder to create.

• Help with forms of formatting with CSS

  I am moving from tables to CSS, and I'm having a problem formatting with a search box form that is to stay on the same line with text links. I works very well with this website to www.volcanicacoffee.com. The question is in the horizontal red bar in the upper part you can see at this link to test http://www.volcanicacoffee.com/testing/SEO3col-absolute-7.htm . The file is associated.

  I spent several hours trying different location codes, but the form of guard falling below the text links search box. The CSS code is anchored in the header. The red horizontal bar is an AP Div that I want to keep for SEO purposes.

  Thanks in advance for your help.

  Buck

  The IE conditional comment has nothing to do with borders ;-)   They are the rules to keep IE line, for example: for the sidebars to be sitting in the correct position, the other to ensure that the background color in the side bars goes down.

  Anyway, I cleaned up the css a little boxes for you and it works for me in IE and FFox.

  As you can see I wrote a shortcut css for the padding and margin in this way selectors, you don't consider specify border-top, border-bottom, etc., it is all written on a single line.

  {#box}
  background-color: #F5F5F5;
  Width: 180px;
  border: 1px solid #BBBBBB;
  do-size: 10px;
  make-weight: bold;
  line-height: 180%;
  text-align: center;
  padding: 5px;
  margin: 0 5px 5px 0;

  }
  {#box2}
  background-color: #F5F5F5;
  Width: 180px;
  border: 1px solid #BBBBBB;
  do-size: 10px;
  make-weight: bold;
  text-align: center;
  line-height: 150%;
  margin: 0 5px 5px 0;
  padding: 5px;
  }

• work with clips

  I do an animation with clips inside the scene but if I put action in the end of these to go to another frame in the stadium, dosnt let me because AS3.0 does'nt alow script inside the buttons and MC.

  Wath can I do for this problem.

  The new code to AS3.0 is so different to AS2

  Thanks for your time.

  You can put a few videos to do this kind of things. ???

  Moreover, this forum is the best, congratulations to all.

  You could never put the code inside the buttons, which shouldn't be a problem for you.  You can put the code inside movieclips on their timeline (s).  The main difference where the code can and cannot go between AS2 and AS3 is that AS3 doesn't allow the code to be attached (hidden) on objects... This should be visible in the timeline panel.  Aside from that, there are many changes in the syntax that you simply take the time to learn.

• Using the PNG format with maximum width without clipping the top and bottom of the image?

  I use PNG format to preserve transparency and shadow, I am trying to integrate to give the illusion that this slab object is floating above the other layers.  First I tried file > place to position the menu object on edge of header/beginning of the content.  This leaves no option to force the image to span the width of any screen.  I need that I tried to use object > fill > and then clicking on the maximum width of the rectangle (which solves the problem of maximum width), but now I am facing a problem of cutting top and bottom of the image.  The next thing I can think of is to go back to Photoshop and to distort the image, so it is not as big.  In my view, there must be an easier way to achieve will not also give my image an abnormal appearance.  Thoughts?  Thanks in advance.

  Thanks, that's useful.  I also found that I've cropped for a large part of the canvas.  After the increase the surface of the canvas AND fill everything is fine now.  I think that your suggestion may help with the problem of affect scroll I will have when you use different resolutions. I will try to set the size in a single dimension (height) so that different resolution screens see the same scrolling actions.  Mylenium thanks!

• How to make Cut-Out with Clipping Path?

  Hello, help please?

  I need to provide a photo of an object that has been described as a 'Cut Out' and a Clipping Path must be included. Now I know this is not a rare condition, but I've never been asked before.  I tried to fill out the application, but unfortunately I was unsuccessful so far.

  OK... so with CS5. I cut the object using the feather (background selected then removed). I saved the way like a 'selection '. But what I ache to understand is this.

  The need is a jpeg file. And I know that if I flatten the file, then save in jpeg format, I'll lose the bottom of transparency and the article will be on white background. So if I send this file how the recipient find the clipping path - which I presume is the path that I saved in the paths tab?  Because when I flattened, I won't lose channels or paths. The captain that they will be an object of the required dimensions, they claimed, but it will be on a white background, therefore, he will not be able to simply 'fit' as a single item in any work they need to.

  Other elements were provided by other people and their file is a jpeg file, and he says he understands a clipping path.  So, I understand that this is possible, but I just can't get out!

  Sometimes I feel so dumb!

  Any help will be much appreciated

  Thanks in advance

  Mark

  I don't think that you can incorporate a clipping path into a jpg file, but you can send a png image

  with transparency based on web or low range of printing. (not recommended).

  The usual method is .psd or .tiff with transparency or the clipping integrated.

• Binding of Photoshop EPS files with clipping paths

  I'm under InDesign CS4 6.0.3 on a dual 2 GHz G5 with Mac OS X 10.5.7.

  We have a workflow that involves files Photoshop EPS being placed in InDesign with object value path of Photoshopclipping path.  If the link is updated or re-issued of the moment, InDesign no longer the image of the boundaries of the way - either on the screen or export to PDF - although still illustrates object -> Clipping Path -> Options choose the type of game to Tracé Photoshop.  The only way I found to get the clipping path to apply fully to the image is to change the type of Tracé Photoshop to zero and return to the Trail Photoshop, while the Preview box is on.  I tried different combinations to transform the Apply Photoshop Clipping Path option on / off power at the time of the initial implementation and at the time of the reissue of links with no effect on this behavior.

  Assuming that you use one format other than EPS and use transparency rather than masks are not in play right now, my questions are:

  1. is this a known issue with InDesign CS4?  If so, can we expect a fix soon?

  2. is there something that can be done on the side of the user who is less bulky than the workaround solution described above?

  They can't fix what they don't know, however. File a formal bug report here:

  Adobe - feature request/Bug Report Form

• Trouble with clips synchronized

  It's certainly a thing 'user error', but I'd like to get an overview of what I might get hurt.

  I have pictures of an event where speakers delivered presentations of slides. The deliverable we produce is basically a PIP type thing where you see the slide, and you have the video of speaker in the top right...

  

  We have also audio microphone. The desire is therefore to synchronize all this and then do the editing. Now, I can get this sync without problem, and I get a compound clip. I import into my schedule and I can 'open in the timeline' to view all components. I can then cut around taking my 3-hour session in a 9-minute film highlights with the look you see here. I also shoot down the camera audio and use the audio desk microphone only... as well as a few voice-over and music.

  But, when I export, I have a video 3 h with black at the beginning and end and no audio. My solution has been to create a new clip of my project, put in a new project and lowering record in a master file. It works, but it does seem like the elegant way to do it.

  Any advice people can have on how CPF handles synchronized clip is very much appreciated.

  Nige.

  You create a synchronized Clip? Or a multicam clip? You say you've got a clip made up, which is similar but not exactly the same as a synchronized video.

  You synchronize the slides and the video presenter? If so, how? Are they captured by a camera as well? (I'm curious about it, because, although it would make their synchronization to the presenter really easy, the quality of the blades would be much better if you had access to the original presentation)

  I think that the problem may be caused by your use of "Open in the timeline", but it is difficult to see without a clearer idea of your workflow. This should be used sparingly or not at all. Normally, you put the clip in a project timeline and edit it. If necessary

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye