Authenticate on the Member Server external windowsdb

Similar Questions

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• How to authenticate using the credential key external services?

  Hello

  I developed a bpel webservice that uses external Web services that is protected by user name and password.

  So in my composite.xml, I put the 2 lines within the reference tag to this service.

  < name = "oracle.webservices.auth.username property" many = "false" type = "xs: String" > ssa.gen < / property > "

  < name = "oracle.webservices.auth.password property" many = "false" type = "xs: String" > * < / property > "

  But as password continues to change, I need some other way to authenticate this webservice without giving the password.

  We use csf - key here? as below:

  < property name = "csf - key" type = "xs: String" much = "false" > ssa.gen < / property >

  How to register a new name of user and password for this key? I need the proper code syntax to be all in composite.xml and also how to map a user to a key?

  Kindly help.

  You can configure the keys to the csf as follows.

  Console EM-> select the SOA domain (under the WebLogic domain name), click right-> select Security-> credentials.

  Create map-> name: oracle.wsm.security (if it does already exist).

  Select the map-> create a key.

  Specify the key name that you want to use (for example, "usernamekey" for example), choose the Type of password and enter the password and save.

  Now you can use this key in the key property of csf for the obligatory corresponding reference in composite.xml - usernamekey.

• How to control frequency, a member server, the time of synchronization to a domain?

  I have a domain with two servers and a domain controller or a member server.  Synchronization DC his time with an external source and provides the source of time for the field.  Generally all works as expected.  However, the time on the Member Server derives from the network.  "Time net/set/y" running manually on the member server corrects the Member Server, but it moves again.

  A solution would be to manually run a script on the Member Server, every hour to make sure that it is time remains synchronized. However is there a way to configure the Member Server so that it automatically keeps in sync with the network it's time?

  Environment: Server Win 2008 R2, s client pc Win 7

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot publish a layout HTML5 sensitive on the RoboHelp Server

  I use the trial versions of RoboHelp 2015 and RoboHelp Server 10. We used the previous version of RoboHelp and RoboHelp Server to publish our help for some time. Our software moves or available to be consulted on various devices, so we try to test responsive publishing HTML 5 on the RoboHelp Server.

  When we try to publish the project we get one of two errors "Publishing has been abandoned. The FTP session was stopped. "or"failed to publish on "TEST_EM". Reason: the FTP session is over. "We have tried this on two machines different author and he can't get through.

  Steps to follow:

  1. We have set up a server with RoboHelp 10 installed.
  2. We have created a test project with RoboHelp 2015 with a sensitive HTML 5 layout.
  3. We could fill in the domain of the evil server directory but the documentation mentions about how to post HTML 5 reagent on the RoboHelp Server, or if this is the case, it does not match the actual screens. When you select a new destination, you get the following window that we learned to love previously, except that it doesn't have a refresh button which lists the server areas and it has this new "Directory Server" field.

  

  We have poured over the documentation and can't find what to put. We have gone through all the other connection protocols, and they do not seem to apply.

  RoboHelp Server Help says:

  Publish your RoboHelp projects (2015 version)

  (1) create or change Responsive HTML5, WebHelp Pro and FlashHelp Pro available.

  (2) do one of the following:

  • Right click the Responsive HTML5, WebHelp Pro and FlashHelp Pro in the Single available

  Source pod layouts and select Properties.

  • Double-click the sensitive HTML5, WebHelp Pro or FlashHelp Pro available in the

  Single Source Layouts pod.

  (3) in the Options dialog box, click next to move to the server selection screen.

  4) click New to create a destination of RoboHelp Server to post projects. In the new Destination

  dialog box, provide the descriptive name, server name, user ID and password to connect and

  authenticate on the RoboHelp Server.

  5) click on the Refresh button to get the updated list areas of the server. If you do not select a

  region, the project is published in the default zone.

  NOTE: To post to the default context (robohelp), enter the name of the server in the

  http:// < servername >: < PortNumber > format. RoboHelp adds

  / server/robohelp for her. Otherwise, to publish in one context other than robohelp, specify a full

  URL to the format http:// < servername >: < PortNumber > / < NomContexte > /

  Server

  6) click OK to save the server configurations and close the new Destination dialog box.

  (7) click on save and build to generate the output.

  (8) once the output is generated, click on publish to publish the project to RoboHelp Server.

  NOTE: To view the project on the server, go to the RoboHelp Server Web Administrator and projects

  tab, select the area where you published the project.

  Unfortunately, there is no button update, as described in step 5.

  Other information:

  We were able to publish the WebHelp Pro project previously created on the new server, just not the HTML5 draft.

  The server logs show nothing on an attempt to logon we feel contact us even the server.

  I installed the update 3.

  Can someone tell what to put in this area or explain why we see not the button refresh?

  Thank you

  Nita

  I am answering my own post in case anyone else runs into this problem. I had installed the update 3, but apparently it took a reboot of the machine to become active. After the machine shut down over the weekend and re-opening RoboHelp this morning, the RoboHelp Server connection protocol option is available in the new Destination window. When you select the option of RoboHelp Server publishes it successfully. Thank you for your help.

• Configure vcenter to talk to the LDAP server

  Hello

  I recently installed the vcenter server and trying to understand it better.

  I have a Windows 2003 Active Directory installed in the same network.

  Is there a way where I can configure this announcement on the vcenter server so that users on the Server LDAP (Active Directory) can connect to the vcenter server.

  So, basically, I'm looking to see if the LDAP users can authenticate on the vCenter Server?

  Any help appreciated...

  Thank you.

  You check the authorization of default vCenter, you will see that there is only (local Administrators group).

  When you join the vCenter Server to a domain AD you can see also the domain user, and usually the Domain Admins group is added to the local Administrators group.

  André

• External HTTP &gt; internal to the web server

  Hello

  I have a router ADSL with a public IP assigned, preforming NAT. This leads to a 506th PIX which leads to a Web server. The entire interior of the ADSL is on private IP addresses.

  I want to allow external users access to the Web server on port 80.

  I inwardly and outwardly put up ICMP connectivity (for testing only) and it works correctly.

  I created a virtual server on the ADSL router that forwards port 80 traffic to the external interface of the web server. It has worked successfully for half an hour and then something in the config changed PIX and it no longer works. Here is my config PIX

  SH conf

  : Saved

  : Written by xxxxx at 08:41:10.001 NZST Thursday, October 13, 2005

  6.3 (4) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable the encrypted password xxxxxxxx

  xxxxxxxxx encrypted passwd

  hostname PIX

  domain ciscopix.com

  clock timezone GMT

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  icmp protocol error correction

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  no names

  name 192.168.5.3 PixExt

  name PixInt 192.168.6.1

  name 192.168.5.1 ADSLInt

  name 192.168.6.2 WebExt

  acl1 list access permit icmp any any echo response

  access-list acl1 allow icmp all once exceed

  access-list icmp permitted acl1 everything all inaccessible

  acl1 list access permit tcp any host 192.168.6.2 eq www

  pager lines 22

  opening of session

  timestamp of the record

  Record being buffered memory errors

  logging trap notifications

  ICMP allow all outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  external IP 192.168.5.3 255.255.255.0

  IP address inside 192.168.6.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.6.2 255.255.255.255 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  NAT (inside) 0 192.168.6.0 255.255.255.0 0 0

  Access-group acl1 in external interface

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 192.168.6.2 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd lease 3600

  dhcpd ping_timeout 750

  xxxxx xxxxxxx privilege 15 encrypted password username

  Terminal width 80

  Cryptochecksum:xxxx

  DMZInside (config) # route sh

  outside 0.0.0.0 0.0.0.0 192.168.5.1 1 ANOTHER static

  outside 192.168.5.0 255.255.255.0 192.168.5.3 1 static CONNECTION

  inside 192.168.6.0 255.255.255.0 192.168.6.1 1 static CONNECTION

  DMZInside (config) #.

  No idea where I have gone wrong?

  Thank you.

  you are missing this statement

  public static 192.168.6.2 (Interior, exterior) 192.168.6.2

  Thank you

  Nadeem

• OBIEE reporting to users not OBIEE that are external to the SMTP server

  Hi all
  
  Nazza salvation,
  
  Would you please help me how send you ISID signals to users not OBIEE (external mails)?
  I configured the mail server and able to send reports for internal mail.
  
  I followed the following steps as mensioned in all blogs:
  1. I created a table with default column d called SA_SYSTEM_USER mensioned.
  2. any in the physical layer
  3 creates a view for model (Dual) table with column "DUMMY".
  4 joined these tables of towing made MODEL and SA_SYSTEM_USER as a Dimension about join a MODEL Email.
  5 renamed columnsfor as mensioned in Bolgs presentation table.
  6 restart the servers.
  7. I noticed the mail of the system and the system delivery profile created with a single email id (where are the other my table SA_SYSTEM_USER email ID?)
  8. but as written in Articles he never sends emails to external e-mails for example [email protected] (this is the email from existng in SA_SYSTEM_USER)
  
  I need an urgent solution please help me...
  
  Thank you very much...

  No, no, nothing is more required SMTP side if his performance of the iBots for IDS in-house.

  If you set up SA_SYSTEM correctly, you can send reports to users non-obiee as account gmail etc.

  Try steps below...

  1. create and save a report using your logon fields and the SA_SYSTEM EMAIL that contains the people you want to send the report. Or by email or logon information must be an OBIEE user that exists in the RPD.
  2. create an iBot and under the general tab, the visibility of the non custom data value and run as an administrator account.
  3. set the conditional query on the report you made in step 1.
  4. for recipients, check the box, "to determine the recipients of conditional query. The "column that contains recipients' must be set to 'connection '.
  5. If you want to save the ibot to a shared folder, and then check the box 'Release for subscription' no otherwise.
  6. choose your content delivery and all other options and ensure that planning is set on immediately if you want to get out immediately.
  7. Save and send to any email address that was on the parole request.

  ======================

• Created by external computer files are read only on the file server.

  Is not a question of indesign, but have searched and searched but cannot find an answer, hoping that someone here had the same problem and find out if it can be fixed.

  Systems:

  MacPro running snow lepoard as the file server

  iMac, read and write files in the Macpro have access to shared files.

  Problem:

  When the iMac saves any type of file, or create directories everything the iMac on the Macpro system is read only the user to Macpro.

  Only solution so far has been to give the iMac user an admin on the MacPro account, then everything they create is not read-only.

  It works but it's not the best of ideas for them to access the system files and you have.

  Is there a way to make the iMac to create files that are not read only without obtaining the server version of Mac OS x or giving them administrative rights to the Macpro.

  For any idea or suggestion would be great

  Thank you

  Problem solved!

  All this is down to the property not sharing or perrmissions.

  For anyone who would need to know:

  in the dialog box get info select "property to ignore on this volume."

  tonyharmer:

  You right where people above in the apple forums where it is very useful

• How 2 Configure ACS 4.2 to delegate authentication to the radius server

  Hello

  We need run the following scenario:

  Cisco VPN client (or any connect, Cisco SSL VPN client)---> Cisco ASA 5520---> Cisco ACS 4.2---> CAT Authentication Server

  The CAT authentication server is a Radius server. It can receive Radius authentication requests and respond. It is used for strong authentication TFA WBS similar to RSA OTP tokens.

  The question is: how we set up the 4.2 ACS to delegate authentication request to another Radius server.

  Thnx

  Add the RSA server as an external database, configure the drop user profile or a group to authenticate on the new external database rather than ACS DB Local (or Windows DB).

  Easy as pie!

  Please rate if this is useful.

• Cannot "connect as current user" via the Security Server

  Hello community,

  I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.

  Single domain

  Customer of the horizon is 3.5.2 and joined to a domain

  2 Security Server 6.2.1 x

  2 Server 6.2.1 connection x

  On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:

  2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)

  2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}

  2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application

  The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.

  In the windows event log, the following error message appears:

  BROKER_USER_AUTHFAILED_GENERAL

  Failed to authenticate the user < UNAUTHENTICATED >

  Attributes:

  Node = hostnameofconnectionsserver.mydomain.com

  Gravity = AUDIT_FAIL

  Time = Mon 28 Dec 19:51:16 THIS 2015

  Module = broker

  UserDisplayName = < UNAUTHENTICATED >

  Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter

  Recognized = true

  Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.

• Cannot enable the Web Server (SSL) site on El Cap Server

  ' tLooking for help here, trying to put in place in El Cap 10.11.3/Server 5.0.15 Web services and the no - SSL server comes just in green in the admn, but the SSL server will not activate. I have an a record for the server to an external DNS server mdm.mycompany.com, and which is mapped to the external IP address of my network. I also have the port forwarding enabled on the router to 80 and 443. Customers outside the network can reach the site at http://mdm.mycompany.com on port 80, but not on 443 as told them the server does not accept unsecured connections. This isn't the same problem when the customer has to trust the certificate; The secure connection is totally denied. My intention here is to activate the Profile Manager, so that I really don't like whether or not the sites work, but the Profile Manager requires a secure connection. I use a cert Self singed at least for testing purposes, but I can't. Imagine that which prevents the site SSL itself allowing all the... Orientation/information appreciated, thank you!

  

  Most of the browsers (and probably accessibility service Apple, aka the green dot) reject/warn self-signed certificates. I would go ahead and obtain a trusted certificate. StartSSL.com offers free class 1 certificates and they work fine.

• the CDRW would connect with the Gracenote server during extraction of CD?

  I use an old 6 x 4 x 6 (2001) CDRW on my iMac for my iTunes cd Ripper. I have a problem with the information on the transfer of (artist, song, album) cd from the Gracenote server. The external CDRW would prevent somehow information that reach the server?

  N °

• Not possible to export the files to external drives

  Have iBook G4 with OS X 10.5.8

  1.2 Ghz PowerPC G4. 512 MB memory. 74.5 GB hard drive, 64 GB available.

  I am trying to export files & folders on a USB key or an external hard drive.

  I get "cannot copy XXXX element because there is not enough free space." As for the tiny files & large files.

  However, the target drives have plenty of space. They also work OK on another Mac. I tried to reformat a hard drive memory so joyless?

  What keeps exporting files from iBook G4?

  Thank you

  a common question:

  Date and time on the iBook can be set to a default date in the past for example 1970 because the battery is drained and day & time are not synchronized via the time server apple.

• Cal issue when you run the FTP server

  My organization has recently purchased Enterprise Cloud Suite (ECS) and as such in Core Cal went (included in the ECS).

  I have a section that needs to be 'entrepreneurs' access a FTP server that will be used to upload and download files only.  No application will run.

  How are they managing Cal licenses?  Contract users need client access licenses to access the FTP server?

  It was suggested that all I could need is to have a Windows external connector... ??

  Is there a better way to store and transfer these files?  Azure storage?

  Hello

  Please post your question here:

  https://social.technet.Microsoft.com/forums/en-us/home?searchTerm=default%20Ftp%20server