Authenticate the ACS 5.2 administrators Active Directory?

Similar Questions

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.

• Cisco Secure ACS groups 5.1 Active Directory and RSA Authentication Manager 7.1 for profiles

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}

  Hello

  I'm deploying an ACS connected to an RSA AuthManager (that is connected to an Active Directory domain)

  I create several groups within the Active Directory server, I try to give to users for their groups different access rights.

  I tried to define an access policy "NetOp/NetAdm" and two authorization rules:

  Rule-1 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETOP 'Auth for net operators' 0

  Rule 2 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETADM 'Auth net admin' 0

  Default: refuse

  In the identity, I have configured the RSA identity source, so that users get authenticated by the RSA Authentication Manager.

  But I still refuse to get access, RSA authentication is successful, but the group membership, active directory does not work, even with the unix attributes or group principal defined for the user.

  My question is this valid configuration scenario? Is there another way to define several profiles according to the Group of users of external source?

  The stages of monitoring:

  Measures

  Request for access received RADIUS 11001

  11017 RADIUS creates a new session

  Assess Service selection strategy

  15004 Matched rule

  Access to Selected 15012 - NetOp/NetAdm service policy

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity Store - server RSA

  24500 Authenticating user on the server's RSA SecurID.

  24501 a session is established with the server's RSA SecurID.

  24506 check successful operation code

  24505 user authentication succeeded.

  24553 user record has been cached

  24502 with RSA SecurID Server session is closed

  Authentication 22037 spent

  22023 proceed to the recovery of the attribute

  24628 user cache not enabled in the configuration of the RADIUS identity token store.

  Identity sequence 22016 completed an iteration of the IDStores

  Evaluate the strategy of group mapping

  15006 set default mapping rule

  Authorization of emergency policy assessment

  15042 no rule has been balanced

  Evaluation of authorization policy

  15006 set default mapping rule

  15016 selected the authorization - DenyAccess profile

  15039 selected authorization profile is DenyAccess

  11003 returned RADIUS Access-Reject

  Thank you

  Christophe

  I think you need to do is to create a sequence of identity with RSA as a selection in

  Authentication and recovery research list of attributes and AD in the additional attribute list recovery research. Then select this sequence as a result of the politics of identity for the service

• How to view the session of users in active directory remotely...

  Hello...

  
  
  I work with the environment of windows server 2008 Active Directory Domain Services (AD DS), Clint computers are joined in the field and having the xp Machines in. Now I want only to see the users session (session) or how to interact with the user desktop when users connected and without disconnect from their session and using the third-party applications. I tried with third party software, but they're expensive.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Get the access denied error after using the rights delegation wizard in Active Directory

  I used the rights delegation wizard to grant permissions to a group in AD and do not always receive either the access message when I try to change anything on an existing object, I can however create new objects without any problem. What can I do to fix this?

  Original title: Delegation issue in AD

  Hello mhipke,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums, as it deals with Active Directory. It is better suited for the IT Pro TechNet public. Please ask your question in the ITPRO Technet Windows Server Directory Services.

  I have provided the link for you:
  http://social.technet.Microsoft.com/forums/en-us/winserverDS/threads

  Sincerely,

  Marilyn

• ACS 4.2 and Active Directory

  I'm putting in place our new ACS 4.2 server. This is version 4.2 Build 124, running on a Windows 2003 server. I'm having some trouble with the enumeration of the groups and just may not know what Miss me. We have 7 different areas, and I can only list one of them groups. We do not run ACS on one of our domain controllers, but the server is a member of the domain controllers. I even added a service account is a domain administrator and services run as account but I still cannot enumerate groups. Any help would be greatly appreciated.

  Hello

  I know that you have a domain administrator account that is running the services ACS. But I'd like to as go you through the steps listed below again.

  ------------------------------------------

  -You should have a user on AD.

  -To make it difficult to hack, give him a very complicated password for a long time.

  -Make the user member of the Domain Admins group.

  -Make the user member of the Administrators group.

  -Make the user member of the Enterprise Administrators group.

  On to Windows 2000/2003 server running ACS:

  -Add the new user to the appropriate local group.

  -Open "Administrative Tools" in the control panel.

  -Open "Computer management".

  -Open 'Local users and groups' and then 'groups '.

  -Double-click the group "Administrators".

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Give special rights to the new user on the ACS server.

  -Open "Administrative Tools" in the control panel.

  -Open "local security policy".

  -Open "local policies".

  -Open "User rights assignment."

  -Double-click "Act as part of operating system"

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Double click on "Log on as a service."

  -Click on 'Add '.

  -Choose the domain in the box "search in".

  -Double-click the user created above to add it.

  -Click OK.

  -Set the ACS services to run as long as the user created.

  -Open "Administrative Tools" in the control panel.

  -Open "Services".

  -Double-click the CSADMIN entry.

  -Click the 'connection '.

  -Click on "This account", and then on the button 'Browse '.

  -Choose the field, double-click the user created previously.

  -Click 'OK '.

  -Repeat for the rest of the CS services.

  -Wait for Windows to apply the security policy changes, or restart the server.

  -If you restarted the server, skip the rest of these instructions.

  -Stop and then start the CSADMIN service.

  -Open the GUI of the ACS.

  -Click on System Configuration.

  -Click on the Service order.

  -Click "restart."

  Note If domain security policy is set to override settings for "Act as part of operating system" and "Log on as a service" rights, rights of user changes listed above will also be to do here.

  If you log on several areas, a full two-way trust must exist between the domains, the user (ACS account) must be created and given the high access in each domainbto be questioned and FULL domain each domain must be listed as a DNS suffix in the properties of the IP Address of the server on which the ACS is installed (restart netlogon service after adding the FULL domain name).

  HTH

  JK

  Please help the rate of messages-

• The ODI 11 g integration Active Directory

  
  Hello experts.

  ODI 11 g integration Active Directory requires any separate identity under license of Oralce management component to be part of the technological landscape, so that integration to be achieved - or he will communicate directly with Active directory.

  This will include security based on roles in ODI - or is it only the authentication user name?

  see you soon,

  John

  Hi John,.

  Please check the doc https://support.oracle.com/epmos/faces/DocumentDisplay?id=1510392.1&displayIndex=1

  The user should create natively studio and privileges also benefit from studio as well... just authentication of connection occur with Active Directory.

  I hope this helps!

  See you soon!

  SH! going

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate

• How to add the CHT to TMS in Active Directory

  Hi all

  I am trying to add a TC to a TMS as a recording device, but it ends with an error "wrong username or password".

  Both TCS and TMS belong to a same ad (test.local), so I tried "domain/username" and "password", "[email protected] / * /" and "password", or simply "username" and "password", but none of them worked.

  Of course, I have already confirmed for TCS HTTP admin account is valid.

  Should I change configuration or something to add the CHT?

  TMS Version: 14.5.0
  TCS v6.1

  Kind regards

  Kotaro

  Hello Kotaro

  TMS uses the API TCS counts, not Windows.

  You must login in TCS Configuration > Site Settings > API > change password for the API

  BR Oleksandr

• 5.3 of the ACS cannot work with two rules of service strategy

  Hello my name is Ivan

  I have a question about ACS v5.3 appliance.

  I have a v 5.3 ACS wo authenticate users wireless, as well as a cisco wlc. A profile is to business users and the second profile is invited.

  Business users must authenticate with Active Directory and the guest with WLC. Guest users to authenticate with the local database of GBA.

  I have set up two service political selection that correspond with the Radius protocol. The first rule is for users to Active Directory and the second is for users in

  the local database of ACS.

  When I try to authenticate users with active directory is OK, but when trying to authenticate users with the local database (Portal comments) GBA was trying to find the

  internal user in Active Directory, because math the first rule and the second profile cannot authenticate.

  When I change the order, first of all the State of users internal and second rule of users from Active Directory, internal users can authenticate in ACS, but

  in Active Directory users cannot authenticate.

  I think that my ACS authenticate only the first rule of the RADIUS to the Active Directory, not two rules of RADIUS at the same time. Or maybe there is a problem in the BONE of the ACS.

  Authentication separately is OK.

  Please could you help me to resolv this problem?

  I enclose my two rules

  Concerning

  Hello Ivan,.

  To solve your problem, you must configure your ACS so that the first selection policy (active directory) corresponds to only for users of the company and the other strategy of selection service (internal users) does not match.

  The second strategy selection of service must be only for guest users.

  If you use Cisco WLCs, it will be easier for you.

  Why?

  Because you can use 'End Station filter' easier to match the SSID.

  In feature selection policy, you build your game to the fine filter station (add it via the Customize button).

  Now, you must create two filters of end station, one is the ssid of comments and one corresponds to the ssid company. (tell how to create later)

  After you create the filter end station and match the selection policy of end station filter function, you have a political service selection matches corporate only guest SSID and other SSP the SSID matches.

  Now you can select different identity for the two SSP sources.

  Now for the filter end of station:

  End station filter is used (in our case) to distinguish the SSID.
  If I want to separate applications of different SSID, I use the end station filter to match what SSID I use.
  cretae end station filter to your SSID, follow the following image:

  

  on point number 4, write resounding brand (*) asteristk of your SSiD (case-sensitive), without spaces. Be sure to avoid spaces before or after.

  (I assume you are using cisco WLC. If not, the idea cannot be applied the way I described above).

  So far, we're OK, except one point. The default SSID guest is not sent by the Cisco WLC to the radius server when the client tries to connect to it, while the SSID of 802. 1 x is.

  To say the WLC to send the guest SSID, you must add this command to the WLC:

  RADIUS config callstationidtype ap-macaddr-ssid

  I hope I described correctly. Let me know if you got it or if you need more explanation.

  Greetings,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• 5.2 ACS does not check the Active directory changes

  Hi all

  I work with ACS 5.2 and using Radius Authentication client vpn.

  The authentication method used is Active Directory in a Windows environment with multiple domains in the same forest.

  My problem occurs when I change from one group to the other user in Active Directory. After that, I get the following message appears when try to connect:

  15039 selected authorization profile is DenyAccess

  The message is as correspond to the default policy.

  Another user in the same ad group works very well.

  All domains in the forest have a relationship of trust between them.

  I use universal groups to include all domain users belongs to this forest.

  Can someone help me?

  Concerning

  What is your rule of authentication corresponding against a single ad group?

  You can check which groups were extracted for the user, as follows:

  -goto "monitoring and troubleshooting.

  -Select authentication - RADIUS - today

  -Find the input that do not match and click on the Details icon

  -Expand the section "Details of authentication". Look under "Other attributes" groups comes from AD to be enrolled in the user

• Active Directory + ACS Remote Agent

  I have a camera ACS (3.2). I understand that I need to use a remote ACS agent installed preferably on a domain controller, Windows authentication. My question is: if I use Active Directory, can I not use external user databases and configure generic LDAP with the appropriate settings to access Active Directory? So I wouldn't need a remote agent? Or I have to use external user databases and configure the databases Windows (which means using an external remote agent? Or I can choose two methods? His confusion as active Direcory cann support for pre-2000 windows domains and I do not know which method of mapping of external user database to use.

  My apologies, missed the word "apparatus" in your original post.

  You can probably do this use anyway, I guess, even though we suggest using a Remote Agent with the Windows DB. If you are not going in this direction, make sure your security permissions (http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/raig/rawi.htm#642394)

  I've had users use the LDAP with Windows Ad database before and it works very well, the only difference (IIRC) is you don't get all the group maps of Windows with this method, but for the authentication of the user only, it should work fine.

• APEX_LDAP. AUTHENTICATE - using Microsoft Active Directory

  Request Express 4.1.1.00.23
  Internet Explorer - 8
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  
  Hi very new at the Apex and try to get the authenticaqtion work against our active directory. I installed an authentication scheme for my application chossing the schema type in the LDAP directory... my settings are the following:
  
  Host: *.
  Port: 389
  Use SSL: No SSL
  Distinguished Name (DN) string: domain\%LDAP_USER%
  Just use the distinguished name (DN): Yes
  
  This works perfect, and authenticates the user in active directory. The problem is when I try to do the following in the database that I really want to implement a custom authentication scheme, it just doesn't work.
  
  Begin
  IF apex_ldap.authenticate)
  p_username = > "testusername",.
  p_password = > "testpassword";
  p_search_base = > 'domain\%LDAP_USER% ',.
  p_host = > ' *',
  p_port = > 389) THEN
  
  dbms_output.put_line ('True');
  
  On the other
  dbms_output.put_line ('False');
  End If;
  End;
  
  No matter what I do it always returns false. I created a function based on the same code and created a custom authentication scheme that calls the function but I still have a fake. Not sure why it works one way and not the other. Also really appreciate it if someone could help me get the code above to work or help correct.
  
  I looked through the forum and tried many different research base channels, but nothing seems to work.
  
  Concerning
  Ash

  Hey Ash,

  you could use the built-in LDAP authentication scheme and use authentication according to load the group information in some parts of the application. A scheme of application-level authorization can permit or deny access to the app, based on these values. In the post-auth feature, you should even have access to the elements of connection (P101_USERNAME, P101_PASSWORD) If you need.

  You can also base your authentication scheme directly custom DBMS_LDAP, if you want to avoid our API not supported.

  Kind regards
  Christian

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• Active Directory groups can be put into service in the FDMEE places?

  Hi experts FeeDMEE:

  We are upgrading to HFM/FDMEE 11.1.2.4.    We would like to use only the Active Directory groups for our security in Shared Services.

  I did a lot of audit looking at whether we can use security location FDMEE ad groups.  So far, the only way I found to make the security location uses the native approach (settings / security settings / security location...) Security by location, click on keep usergroup to set up groups).    But it doesn't seem to be an option if you create groups such as native or ad groups (FDMEE them creates only natively).

  Does anyone know if it is possible in FDMEE to use security of the location ad groups?

  Thank you
  Mark Smith

  I discovered that it is more possible for FDMEE create Aboriginal groups for the security of the location.

  However, Active Directory groups can be added as members of indigenous groups.   In this way, users should only be added to Active Directory groups.    The only maintenance is to add or remove groups active directory to or from the indigenous groups of FDMEE.