Active Directory groups can be put into service in the FDMEE places?

Similar Questions

• Put into service on the data store much more space than it should be.

  Hi all

  I created a virtual machine but I'm puzzled as to why it has set more service space according to the attached screenshots but I understand not leave this space.

  Is there a way I can fix this?

  Thank you

  Welcome to the community,

  Provisioning for the virtual disks that you have either used end, or that one (or more) of the virtual machines have Active snapshots are two reasons I could think.

  André

• VMWare esxi 5.5 - is possible to shrink a thick disk hard put into service?

  Hey guys

  Recently, I have increased the size of the hard drive to one of my VM to 300 GB drives when I only need 200GB.

  The player is supplied thickness. Memory I don't think that you can reduce a thick disc put into service from the client VMWare 5.5.

  So my question is, is there another way I can reduce this hard drive stocked thickness so I can recover unused space?

  Kind regards

  Aaron

  Yes, technically, if you have a 300 GB windows volume supported by a thick hard of 300 GB you can do the following:

  1. Defragment system files comments with Raxco Disk defrag or similar, as the use of the option consolidate free space
  2. Try and make sure that a good number costs blocks by the end of the partition (options defrag boot use pagefile and $mft etc.)
  3. Reduce the 200 GB partition
  4. Storage vmotion virtual machine and set the destination thin format

  This hard never will now have more than 200 GB unless the windows partition is cultivated but the hard remains thin. Otherwise, vmware standalone converter or vmkfstools way to go. If prefer vmkfstools.

• Free space capacity, put into service,

  Hello

  I know that this has also been discussed in other threads, but still things are not clear to me.

  I store data with space set aside almost two times more capacity and about 30 GB of free.

  I understand that space put into service can be more if I have a provisioning, but this isn't the case. Thick, all my machines are put into service.
  The next thing are snapshots. I have pictures so probably that's why I put into service space more than my abilities.

  What don't get me, is how I still get free space... I mean that snapshots take up real space. If I have a 50 GB HD a snapshot 1 50 GB is created. So, normally, in my opinion, I would actually have 100 GB of storage used and a - Let's say - 60 GB datastore which means I have no available space...

  I miss something here?

  A snapshot in VMware products contains only deltas, i.e. becomes the parent disk. A snapshot starts with a small file and develops over time. Since it can grow to the size of the virtual disk that is put into service, the maximum size is added to the space put into service that appears in the summary virtual machines.

  Just a quick comment for "all snapshots are by default thin stocked... ». It's not exactly how it is. Provisioning is a feature of system files and used only for disks virtual base. Snapshots use a fragmented, file format which consists of blocks of metadata database and checked.

  André

• How can I increase size disc put into service?

  Hello

  I'm looking for solutions on how to increase the size of the disc put into service? I've deleted all my snapshot and then I could increase to 24 GB to 31 GB (screenshot) then I did the new snapshot, it shows the new size, 31GB, but when I recompose a VM, I still only 23 GB and no new size, 31 GB, where could be the problem? Thank you

  Hello

  You must go to your guest operating system.

  Open in windows Disk Manager, a new analysis of the disk and you can see the full size. After that, you will still grow your C: partition. But windows 7 should be able to do during the race.

  Tim

• Put into service devices (EX60, etc.) added as TMS systems

  Two questions based on this topic.

  1. I noticed when I configured my EX60 with our VCS that everything has worked out perfectly well.  However, I would like to add also the system in TMS as a system that gets watched, not managed as such by TMS.  I noticed that there is a checkbox in the settings called 'Set up', preventing MSDS to alter the configuration of the parameters on the codec and switching TMS to be VCS.  However, I have noticed once that I added it in TMS after it has been supplied by VCS, TMS has changed the settings of commissioning until I could check the put option in service in the page settings of TMS of the codec.  Y at - it a good way or numbered steps to add a codec in TMS that will eventually be put into service in VCS?

  2. How someone handles directories within TMS, if one has a source of directory-based endpoints in a folder where the aircraft put into service, and you have the directory based on the configuration directory.  How would he keep the system appear twice?  Right now the directory provsioning side two H.323/SIP as @domaine, while settings for H.323 and SIP is @domaine.  Are there two entries because it is listed in the telephone directory in two different places, or the H.323 entrance is different?

  So, basically, what is the preferred method of deployment when provisioing these devices with the VCS and wanting to be able of have registered them in TMS for all purposes the user would like.  Because obviously the two can be made, do not know the best way to go about it.

  Hi Patrick

  1: I tested the first scenario in two ways, adding the endpoint to the TMS and then provision it and purge, available and add it again.

  None of these facts, the box automatically ticked but adding the system first, gave the time check box so that the parameters of TMS is not applied. I guess it's the best way to do at the moment.

  2: as you know, when the system is put into operation it is associated with the user in the TMSPE directory, FindMe would be the answer here and then choose to not import the "peripheral" in the provisioning directory to keep only the URI FindMe. You want to configure the EX with a model of the device: [email protected] / * /

  The end point once added to TMS will appear in the "All systems" directory, which is an effect that you get when you add the system put in service to TMS. But the effect is neutralized by FindMe when you are not importing the user devices in the configuration directory.

  / Magnus

• How to upgrade the form for organizations put into service?

  Hello

  I have a similar problem, as indicated here IOM - provided users with versions of form different resources

  But I need to update the form for organizations. I added 3 custom to your UD_ADOU attributes and this form is visible to the new accounts set up. Old accounts ORG provisioned see attributes form the only version 0.

  So I tried to use FVC utility to update these accounts of Organization put into service, but it does not work.

  Here are my properties file:

  $ cat fvc.properties

  ResourceObject; OU AD

  FormName; UD_ADOU

  FromVersion; 0

  /ToVersion; AdOUForm02

  Parent; UD_ADOU_DEPARTMENTCODE; N/A

  Parent; UD_ADOU_ORGUNITTYPE; Department

  Parent; UD_ADOU_MANAGER; '' cn = manager01, ou = users, dc = adroot, dc = local"

  I think it works for the only user accounts (see doc: http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/formver.htm#CCHCBDBJ )

  My question is, who can update a form for organizations put into service? Is it possible to update the configured accounts of organizations by FVC utility? If so, how?

  Thank you

  Milan

  OK I found the solution and I found a bug in the IOM probably.

  The main tables are SDK and UD_ADOU;

  The SDK table contains information about the last active version of the form... org

  The UD_ADOU table contains all the forms (supplied) and their version of the form that uses the account provisioned.

  So I used the following SQL command to update the version of IOM 11.1.2.1 forms:

  Update UD_ADOU set UD_ADOU_VERSION =

  (select SDK_ACTIVE_VERSION in the SDK where SDK_NAME = 'UD_ADOU');

  commit;

  In IOM 11.1.2.2.x I started the work of the "upgrade" form, but as I said, after this i see new attributes in the form of commissioning Org, but when I change the data, these data are not configured for the announcement.

  Then I checked the SDK and UD_ADOU tables and I found in the SDK table active the last version of the East ADOU 1.  BUT! in the UD_ADOU table, all records have UD_ADOU_VERSION = 7! (Value 7 is the number of the line of the record with the SDK_NAME = "UD_ADOU").  Is this a bug?

  I changed all these archives to the value 1.

  Update UD_ADOU set UD_ADOU_VERSION = 1;

  commit;

  And now, also commissioning works well in IOM 11.1.2.2.x

  Milan

• Strategy of Kerberos WinServer2008r2 Active Directory group

  Hi all

  Need help bad in this. I'm trying to implement kerberos on my active directory. What I understand is kerberos is the default and the primary authentication protocol used when connected to a domain, but where and how do I configure kerberos settings in group policy? I managed to find configurations of kerberos in the "Local Group Policy Editor", but this would not push configurations to my clients right?

  I want to disable NTLM authentication as well and once again I can found under local policies > security options, but they are all local policies right? Is it possible that I can disable NTLM on my active directory and ensure that these settings are applied to my both client computers?

  Thank you so much in advance!
  PS: Sorry if I got some of my facts wrong, I'm a student performs internship and my understanding in active directory is not as strong.

  Server forums are more on the side the web site of Microsoft TechNet,
  This is where you find people who know.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Administrator rights to the ACS using Active Directory groups

  Good afternoon

  We must be able to use administrative accounts for our device ACS who reside in an Active Directory group, if possible.  If this is not possible, what other safer options would we be able to use (RADIUS authentication or authentication RSA 2)?

  Thanks in advance

  You can only use the locally stored accounts within the ACS.

• Portal administrators from Active Directory groups

  I want to add additional users with the status of "admin", so that more people can use the "Admin Console". I want to do this using Active Directory groups.

  Can anyone say if this is possible and how?

  
  

  Maybe it's in the documentation, but I couldn't find it.

  For now, it is not possible to assign the Admin role to a group of users. However, you can promote individual users to the Administrator role. You can search for a user name and click on the user name to view the details of a user. On the left side, you will see a role (s) and the 'User' text is clickable. When you click on that text you will be able to change the role.

• Differences in space put into service

  Hi, I'm relatively new to VMware and I encounter some difficulties to understand how funded space works in what I see several different numbers listed for the same VM that differ considerably.

  I'm trying to create some new VM that have the same characteristics as our production VM essentially; I'll use the same amount of cores, memory and hard disk space.  What I can't understand, is what has been actually put into service to these servers when they were created.

  When looking at the summary page of the virtual machine display under storage 402,74 GB provisioned resources but when I go in the settings of the virtual machine and watch the virtual disk parameters, it displays 100 GB as the size provisioned with a lazy kind of thickness to zero (it is grayed out).  If I connect on the client Windows that is running and watch the disk it shows 107 GB total capacity.

  Why a disc thick provisioned would type with 100 GB located in the VM settings show 402 GB set up during the search to the resources under the Summary tab?

  Thanks in advance!

  Yes, each snapshot can consume the same amount of space as the basic disk.

• Can you put into fields in all capital letters

  Can you put into fields in all capital letters?

  Thank you

  Use this code in the custom field validation script:

  Event.Value = event.value.toUpperCase ();

• How can I put my name at the bottom of my outgoing mail?

  Original title: Hot Mail

  How can I put my name at the bottom of my outgoing mail without entering each time?

  Hi Lance,.

  Are you facing issue while using the account Hotmail on Mail app?

  You must change the options to add outgoing signature is automatically sends in the settings of the program by e-mail.

  If you use the Mail application in Windows 8, you can see the article to change the settings for Mail app to use email signatures.

  Settings that apply to all accounts

  If you try to edit while using Hotmail like webmail, you must change the parameters into account Hotmail itself.

  You can check the thread and check:

  How can I add an AutoSignature to a Hotmail address?

  You must post your query in the Forums Windows Live itself.

  Windows Essentials Forums

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  carolfromknoxville wrote:

  I tried to tap three fingers on the trackpad to find the definition of a word in an article.  It did not work.  How can I put a definition of the word in an article published in El Capitan?  I googled this question and he said to three fingers on the trackpad, of the band which is what I tried without success.

  Highlight the word, right-click on it and select "search... "with the white line that represents all that is the word.  It will pull up from the definition in the dictionary.

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.