Authentication of Windows with ACS groups
I try to authentication of connection configuration on all of our Cisco switches. I created a group of AD Windows called NetworkAdmins and the correct users added to this group. Inside of the CSA, I did a group mapping and mapped my ACS group called NetworkAdmins to my group NetworkAdmins of Windows.
I have set up my Cisco 3750 with the following commands for authentication.
AAA new-model
AAA authentication login NetworkAdmins group Ganymede + local
AAA authorization exec NetworkAdmins group Ganymede + local
AAA accounting update newinfo
AAA accounting exec default start-stop Ganymede group.
AAA accounting update newinfo
AAA accounting exec default start-stop Ganymede group.
AAA - the id of the joint session
Authentication works, but it authenticates from any user, not just for users in the NetworkAdmins group. How can I tell the switch to authenticate only on the NetworkAdmins group?
Thanks for the help!
ACS, under your group settings to configure NAR to allow clients of the AAA. Under the default group GBA configure NAR to refuse all AAA clients (or necessary).
Hope that helps.
Tags: Cisco Security
Similar Questions
-
Authentication EAP - TLS with ACS 5.2
Hi all
I have question on EAP - TLS with ACS 5.2.
If I want to implement the EAP - TLS with Microsoft CA, how authentication computer and user will be held?
Understand that the cert is required on the client and the server end, but is this certificate to the computer links or links to individual users?
If the links to the user, and I have a shared PC connection by few users, is that each user account will have their own certificates?
And each individual user will have to manually get the CA cert? is there another method that my environment has more than 3000 PCs.
And also if it binds to the user, any user can get their CA cert with their AD username and password, if they bring in their own device and try to get the CA certificate, they will be able to properly install the cert in their device on the right?
I hope you guys can help with that. Thank you.
Hope this will answer most of your questions:
Client certificate or user
http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T10
Computer certificate
http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T15
In the case of EAP - TLS we have the certificate of computer and user installed on the machines.
Kind regards
Jousset
The rate of useful messages-
-
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}
Hello
I'm deploying an ACS connected to an RSA AuthManager (that is connected to an Active Directory domain)
I create several groups within the Active Directory server, I try to give to users for their groups different access rights.
I tried to define an access policy "NetOp/NetAdm" and two authorization rules:
Rule-1 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETOP 'Auth for net operators' 0
Rule 2 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETADM 'Auth net admin' 0
Default: refuse
In the identity, I have configured the RSA identity source, so that users get authenticated by the RSA Authentication Manager.
But I still refuse to get access, RSA authentication is successful, but the group membership, active directory does not work, even with the unix attributes or group principal defined for the user.
My question is this valid configuration scenario? Is there another way to define several profiles according to the Group of users of external source?
The stages of monitoring:
Measures
Request for access received RADIUS 11001
11017 RADIUS creates a new session
Assess Service selection strategy
15004 Matched rule
Access to Selected 15012 - NetOp/NetAdm service policy
Evaluate the politics of identity
15004 Matched rule
15013 selected identity Store - server RSA
24500 Authenticating user on the server's RSA SecurID.
24501 a session is established with the server's RSA SecurID.
24506 check successful operation code
24505 user authentication succeeded.
24553 user record has been cached
24502 with RSA SecurID Server session is closed
Authentication 22037 spent
22023 proceed to the recovery of the attribute
24628 user cache not enabled in the configuration of the RADIUS identity token store.
Identity sequence 22016 completed an iteration of the IDStores
Evaluate the strategy of group mapping
15006 set default mapping rule
Authorization of emergency policy assessment
15042 no rule has been balanced
Evaluation of authorization policy
15006 set default mapping rule
15016 selected the authorization - DenyAccess profile
15039 selected authorization profile is DenyAccess
11003 returned RADIUS Access-Reject
Thank you
Christophe
I think you need to do is to create a sequence of identity with RSA as a selection in
Authentication and recovery research list of attributes and AD in the additional attribute list recovery research. Then select this sequence as a result of the politics of identity for the service
-
ACS 5.2 assignment of authorization with nested groups in LDAP
I have a Cisco Secure ACS 5.2 on a virtual machine. We use it for administrative access to our equipment Cisco GANYMEDE +. I use LDAP to authenticate with acitive directory. I currently run when a user is directly in the group that is assigned. I change the way in which assign us group permissions and have created nested groups.
For example:
-User1 is a member of group1
g -roup1 is a member of the "Group 2".
I have card group2 to have access to my devices. However, User1 is not get mapped to the Group of law and access is denied.
When I go to the monitoring, reporting and authentication GANYMEDE + details, under other attributes where it shows the outside groups the user is a member, I don't see group2, only group1.
However when User1 is a member of group2 directly, the user is able to log on.
GBA 5.2 not does support permissions allow this how to use nested groups?
Mapping of nested groups is not supported by LDAP (because users containing that attribute memberOf groups just above them, are not nested). It is a behavior deafult when we use nested with LDAP groups. You must add subgroups for GBA and both respective authorization rules.
Kind regards
Jousset
The rate of useful messages-
-
I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it
This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;
- OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.
-
3015 stops working with ACS, when updated to 3.1
Hello
We´ve uses the 3015 with 3.5.2 for a few months.
It s been using ACS 3.0 with Radius set up exactedly as described in "using Cisco Secure ACS for Windows with the.
3000 Concentrator VPN - IPSec.
Now, we have improved the ACS to 3.1 and it stops working.
When you try to TEST the communication between the 3015 and ACS we get "rejected authentication: password group is."
not configured", and if looking in the logg you can see what follows.
09:01:43.990 02/28/2003 191, SEV = 8 AUTHDBG/58 RPT = 2
AUTH_Callback (514afe4, 0, 0)
192 09:01:43.990 02/28/2003 SEV = 6 RPT AUTH/4 = 2
Successful authentication: manage 12, server = 192.168.244.48 =, user = borta
193 09:01:43.990 02/28/2003 SEV = 3 RPT AUTH/5 = 10
Authentication was rejected: reason = group of password is not configured
manage 12, server = 192.168.244.48 =, user = borta, area =
09:01:43.990 195 02/28/2003 SEV = 8 RPT AUTHDBG/2 = 2
AUTH_Close (12)
Any ideas?
ACS 3.1 is slightly changed it returns the class attribute in its packages to respond when a user authenticates, this was done for session management purposes. Normally, this has no effect on everything that you are authenticating against, but the 3000 uses this class attribute to force VPn users in a specific group. For example, you can force the VPN users in specific groups of 3000 by returning the class attribute so that the user with a specific group VPN3000 name, so any group they have actually configured in the VPN client, they find themselves in this other group and inherit all settings in this group.
The error "password of group is not configured" comes from the fact that ACS3.1 returns a string in the format "dfhsdfjsdfshhhhghgkgekjfkjguwywe" (or something like that anyway :-)) in the Class attribute. The 3,000 who interprets as you want to force this user in this group. Of course this group name does not exist on the 3000, and you get rejected.
There are two ways around this:
-Move the hub to what anyone higher than what you're running. From v3.5.3 ignored 3000 this format of the attribute and access connections works very well even if ACS always sends the return attribute.
-Change the user or group ACS and actually return the appropriate form the class attribute:
UO = groupname;
where groupname is the name of group VPN3000 you want this user to be placed in (it may or may be not the same as the one they set up in their client). Make sure that UO is in capital letters and do not forget the semicolon. The attribute Class is so just check 25, RADIUS (IETF) attribute cela and off you go, you may need to activate under Interface Config - RADIUS (IETF) Firstly if you see under the ACS user/group.
-
Permission of AAA with ACS Shell-games
Hi all
I use a router cisco 871 running that version 12.4 (11) T advanced IP Services.
I have difficulty getting permission to AAA to work properly with ACS.
I am able to configure ACS fine users and assign them shell and private level 7.
I then install a set of Shell Auth and enter the issuance of orders and configure.
When I log in as a user, I get an exec with a level of 7 priv no problem, but I never seem to be able to
to access global configuration mode by typing in conf (or set up) terminal or t.
If I type con? It is the only command connect, configure is never an option...
The only way I can get this to work is by entering the command:
privilege exec level 7 Configure terminal
I thought the whole purpose of the ACS Shell Set to provide this information to the router?
It's frustrating
The ACS server is set up with the Shell Set named Level_7 order authorization
It is attributed to the relevant groups and I have the 'Unmatched orders' option selected in the 'license '.
The "unmatched Args allowed" is also selected.
See an extract of my IOS config below:
AAA new-model
!
!
AAA group Ganymede Server + ACS
Server 10.90.0.11
!
AAA authentication login default group local ACS
AAA authorization exec default group ACS
AAA authorization commands 7 by default local ACS group
!
Cisco radius-server host 10.90.0.11 keys
!
!
privilege exec level 7 Configure terminal
privilege exec level 7 set up
privilege exec level 7 show running-config
privileges exec level 7 show
!
Hope you can help me with this one...
PS I tried with orders of privilege on the router and remove the router and just keep getting the same results!
Hello
So now,
You're actually using two different options and trying to couple then together. What I would say is you either use authorization Command Shell function or play with level privileges. Not mixed together both.
Above scenario might work, if you move orders to focus on level 6 and give the 7 user privilege level. He couldn't be sure. Try it and share the results.
That's what I suggest that orders back to a normal level.
Provided below are the steps to set up the shell command authorization:
-------------------------------------------
Follow these steps on the router:
-------------------------------------------
! - is the desired username
! - is the password
! create - us a local user name and password
! - in case we are not able to get authenticated via
! - our Ganymede server +. To provide a backdoor.
password username 15 privilege
! - To apply the aaa on the router model
AAA new-model
! - Following command is to specify our ACS
! - location of the server, where is the
! - ip address of the ACS server. And
! - is the key which must be the same during the FAC and the router.
radius-server host key
! - To get the authentication of users through ACS, when they try to log - in
! - If our router is unable to join the ACS, we will use
! - our local user name & the password that we created above. This
! - we prevent locking.
AAA authentication login default group Ganymede + local
AAA authorization exec default group Ganymede + local
AAA authorization config-commands
AAA authorization commands 0 default group Ganymede + local
AAA authorization commands 1 default group Ganymede + local
AAA authorization commands 15 default group Ganymede + local
! - Sequence of commands are for posting to the activity of the user.
! - When the user connects to the device.
AAA accounting exec default start-stop Ganymede group.
AAA accounting system default start-stop Ganymede group.
orders accounting AAA 0 arrhythmic default group Ganymede +.
orders accounting AAA 1 by default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
--------------------
ACS configuration
--------------------
[1] Goto 'Profile components shared' a-> 'Shell command authorization sets'-> 'Add '.
Provide any name at all.
provide sufficient description (if necessary)
(a) for full administrative access set.
In the unmatched controls, select 'allow '.
(b) for all access limited.
In the unmatched controls, select "decline."
And in the field above 'Add a command' box, type in the box below and the main command "permit unmatched Args" Order under allow.
For example: If we want the user to only have access to the following commads:
opening of session
Logout
output
Enable
Disable
Show
Then, the configuration should be:
-----------------------------------------------
-Allowed unparalleled Args.
-----------------------------------------------
connection permit
permit disconnection
exit permits
Select the permit
disable the permit
license terminal configuration
ethernet interface license
permits 0
to see the running-config
------------------------------------------------
in example above, user will be allowed to run only from commands. If the user tries to run the interface ethernet 1', the user will get "failed command authorization.
[2] press 'submit '.
[3] Goto Group on which we want to apply these command authorization set. Select 'change settings '.
(more...)
-
Hello
We use ACS4.2 to authenticate network administrators to access the switches and routers. ACS is integrated with Windows Active Directory.
If we map groups of ads to groups of the ACS and we specify the access restriction in the ACS groups.
now, we want to use the ACS to authenticate wireless users. Wireless use their AD accounts.
so I think that we should create a new internal group GBA and map AD mobile users to this group. using the Radius attributes, we can put these users in one vlan individual.
But what happens if a network administrator will access the wireless network? It will use the AD account that belongs to two groups: group admin network and wireless.
then ACS will do in this case? she contributes the first group or the second, or maybe both?
Network administrators can access the wireless network? If so, that you need not additional servers. Do you use national plans of action on GBA?
-
Use EAP-FAST with ACS 5.2
Hello everyone,
I use Active Directory as external identity for ACS store. In ACS 5.2 Web interface to navigate to of access policies > Access Services and going tab protocols allowed , the only protocol that works is PAP/ASCII. In the documentation of ACS, it is described as the less secure authentication for ACS.
I would use EAP-FAST. Should what command I enter on the aaa client to work with? The router's IOS version 12.4.
Here is his aaa configuration:
AAA new-model
!
!
AAA server Ganymede group + ACSTEST1
Server 1.1.1.12.2.2.2 Server
!
AAA authentication banner ^ CCCCCC * GANYMEDE + server is not available, use local defC
AAA-authentication failure message ^ C
AAA authentication login default group Ganymede +.
Connection authentication AAA VTY Ganymede + local group
Connection authentication AAA CONSOLE Ganymede + local group
the AAA authentication enable default group Ganymede + activate
AAA authorization exec default group Ganymede + authenticated if
AAA authorization commands 1 default group Ganymede + authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
AAA accounting system default start-stop Ganymede group.
!
!
AAA - the id of the joint sessionI have found no help in the Cisco IOS Security command reference or in the Internet.
Thank you for your help.
Best regards, Andy
Hello
GANYMEDE + authentication is only supported by the PAP, is not possible to use EAP-FAST.
Please keep in mind that the EAP methods using RADIUS, and not with GANYMEDE.
HTH,
Tiago--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
So I decided to try the groups to tabs, because I had never actually used the feature before. Now, every time I open Firefox the tab or tabs that belonged to the Group of open again. How can I stop this?
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Reinstalled Win Vista with the recovery CD that I got with my HP Pavilion, now get quick activate Windows with a new product key. MS sticker on the tower is one that says 'Vista', no product key. When I go to activate Windows, I offer the choice to buy another copy of Windows or enter a new product key. A run the Genuine Advantage tool and he says it's "authentic." HP will not help, they say I have to buy another copy of Windows from MS, but I already paid for it when I bought the machine. What can I do?
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 27HYQ - XTKW2-WQD8Q
Windows product key hash: U8YEZzymoD4DMyaMb32rPrNIS90 =
Windows product ID: 89578-OEM-7332157-00061
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {168A88C1-E5B9-4D60-9CED-7F52DA3B003F} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.101014 - 0432
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{168A88C1-E5B9-4D60-9CED-7F52DA3B003F} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-WQD8Q 89578-OEM-7332157-00061 2 S-1-5-21-1435749754-187019022-2857907007 HP-Pavilion ,RK573AA-ABA a1710n Phoenix Technologies, LTD 5,07 20070319000000.000000 + 000B5303507018400F8 1009 0409 Eastern Standard Time(GMT-05:00) 0 3 HPQOEM SLIC-CPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-321-500061-02-1033-6000.0000-0852011
Installation ID: 012511236930294740295602407015475991935936271095890640
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: WQD8Q
License status: initial grace period
Time remaining: 15840 minute (s) on (11 day (s))Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OAAAAAEAAgABAAEAAwACAAAAAwABAAEAJJSQuYpR4jtIJGQJ9DG0EIC68vQa7DYXAnisVr34jrY =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
SLIC SLIC-CPC HPQOEM
SSDT HPQOEM SLIC-CPCYour tour definitely had a COA sticker initially (or at least if it does not, the HP was in breach of its contract with MS conditions).
Let's try a possible alternative solution...
Note that the key comprehensive OEM_SLP used here is * removed the product key for privacy * and you must enter if asked...
Your license store is perhaps corrupt - please try the following...
Please try the steps below to re-create the files of the Bank. This can solve the problem.
(1) open an Internet browser window.
(2) type: %windir%\system32 in the browser's address bar.
(3) find the CMD.exe file
(4) make a right click on CMD.exe and select "Run as Administrator"
(5) type: net stop slsvc (it may ask you if you're sure, select Yes)
(6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
(7) type: Rename tokens.bar tokens.dat
(8) type: cd %windir%\system32
(9) type: net start slsvc
(10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
(11) restart your computer twice.
(12) you may need to enter you product key and activate it.
Once complete, please post back with a new report MGADiag -
WLC 4402 impossible to authenticate correctly with ACS 5.2
For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped
Controller of >
user:
password:
No matter what I typed (internal or external users), nothing seems to work.
It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.
Hello
Please delete privilege on the ACS level settings.
Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks
By default the privilege - do not use.
Maximum privilege - not in use
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages
-
Hey all who read this, first time I've used this site before, please excuse any errors or all what I do = S
Right, that's my problem, I'm pretty good with computers, my knowledge is limited, however, I recently had a laptop to use at the University, this computer laptop is a HP g6000 and has windows 7 loaded on board but did not have Vista originally.
I started the machine and the former owner somehow deleted all Windows 7 Administration group or usernames (user, SYSTEM, ect, lot) and to this effect, I can't do anything! Access is denied on the C drive, any changes to files, restore, even delete a word document do appear a mistake, ive tried safe mode, activating the hidden via Cmd prompt administrator and create a new user with administration, still does not work, seems to me that Windows 7 is not even who is allowed to do what more and won't let me do anything , I really would appreciate any help I really need it to do my studies in College, I have not had any dics or anything with the laptop computer, and just to make things a lot bigger, the Cd drive only opens when you first start when windows is loaded its does not appear under "My computer" and ceases to exist...
Anyway, any help would be greatly appreciated, thank you very much
Just to add, when I go to computer > C drive > properties > security, it displays a message saying that I'm not allowed to see/touch anything, person = P, if that's any help.
Yes, sorry, I had to do was...
My computer > right click on the C drive > properties > Security tab > click on Advanced > go to the tab "Owner" > click Edit > tick the box at the bottom that says "Replace the owner of subcontainers and objects" > highlight your current user account in the "change Onwer to: ' box > then click on apply!
This will grant the selected user full access and control of the administrator, may take several minutes to change.
-
AAA RADIUS authentication for the only user group
Hello
I use ACS3.1 and tries to use authentication radius for all network switches in my company.
Meet the im problem now is how to restrict only a user group to access the connection/exec switches? It seems that all user IDS in my acs able to telnet (user access) to the switch (using their login credentials).
I would like to limit still from telnet by using their ID except administrator group.
Counsel on how this is possible.
TKS!
The GBA, you need admin users in their own ACS group separated, leaving other users in their own group also.
Change the group that contains the users you don't want to give access to and under the heading of restricted access network (OAN), in "Group defined Network Access Restrictions", check the "Define based on IP access restrictions", choose "Rejected the call point" and enter switches in the table below (put a * in the port and address).
This prevents standard users authentication to switches. You can add all your switches in a group of network devices (NDG) to this, then you have to add that, in the section NAR rather than adding each switch individually.
-
Hi all
I try to incorporate some ASA (8,6) with ACS (5,7), here is the configuration of the SAA.
SH run | in aaa
RADIUS Protocol RADIUS AAA server
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + (management) host 10.243.14.24
GANYMEDE + LOCAL console for AAA of http authentication
authentication AAA ssh console GANYMEDE + LOCAL
Console telnet authentication GANYMEDE + LOCAL AAA
AAA accounting console GANYMEDE + ssh
AAA accounting command 15 GANYMEDE privilege +.
Console telnet accounting AAA GANYMEDE +.
AAA authorization exec-authentication server
AAA authorization GANYMEDE + loCAL commandThe problem is that I can get connected to ASA, but I can't type all commands in the CLI, I get the error message "failure of command approval.
I have the same sets of commands and the shell profiles created for switches and it works perfectly.
This is the behavior of ACS journals
1. once I am having authenticated, I can see the logs in ACS with my username
2 but when I type any commnds, is put down my permission and I see in the newspapers of the authorization of the CSA that this username is "enable_15".Can someone help me identify what the problem is
Thank you
ReverchonThis happens when we have control permission enabled on ASA and try to run any command level 15 on SAA. To correct this problem you must check enable authentication of a user against GBA / GANYMEDE.
AAA authentication enable console LOCAL + GANYMEDE
After above listed licensing order, ASA will start to check the enable password against ACS/Ganymede and you use Ganymede activate the password that we can put on by user.
~ Jousset
Maybe you are looking for
-
How to put windows 7 64 bit on my new hard drive?
Hello I have 2 years, this laptop Satellite L505-13j.My hard drive is damaged, slow, small. I buy the new hard drive, but I don't have the CD with windows backup and software for this type of laptop.Download windows 7 Home premium 64-bit and software
-
Satellite L505 - 10J W - Lan Adapter missing
Hello the W-Lan-adapter to my laptop (Satellite L505-10J PSLS3E) suddenly disappeared yesterday during normal use; shortly before the Wi - Fi connection still worked. The adapter is no more displayed in the Device Manager of the first operating syste
-
my mac has stopped most of the loading sites, although they charge on other computers
All of a sudden this morning I have difficulties getting Web sites to open. I'm on an iMac. Everything was fine when I got on the computer this morning. Then, he stopped being able to load most of the Web sites. I tried to use Google Chrome and S
-
Brand new iPad: not enough space to install updates
I have a brand new iPad 32 GB and when I tried to install the update of the software I get the message that there is no room. I don't have any app or music or pictures inside. How can it be possible? Also, it takes FOREVER to load. What can I do? I h
-
vidstub.sys caused a stop screen
In the edition of Win XP Media Ctr, I tried to install Bootscreen and change the splash screen, and it caused the computer with a blue screen.