Authentication RSA on ASA key error
Hello
I'm trying to authenticate cisco 851 on ASA 5520 with MS CA digital certificates. had this error:
CRYPTO_PKI (make trustedCerts list) CRYPTO_PKI:check_key_usage: ExtendedKeyUsage OID = 1.3.6.1.5.5.8.2.2
CRYPTO_PKI:check_key_usage: ExtendedKeyUsage OID = 1.3.6.1.5.5.8.2.2, NOT acceptable
CRYPTO_PKI:check_key_usage: Not acceptable OID ExtendedKeyUsage found
It seems that EKU (ExtendedKeyUsage) does not. You can try to disable the check of EKU by adding the following command under trustpoint config:
ignore-ipsec-keyusage
Tags: Cisco Security
Similar Questions
-
Installation / product - key error 25004 (this product key can be applied to the computer, due to previous entries of product key) and 1073422306 system error.
You try to install Office or Windows product? Most of the time, this error 1073422306 is during the installation of Office.
Please look at the following thread to see if it helps.
http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/Office-2007-installation-gives-error-25004/6751fcef-F955-4a69-a8af-21444b6f5aa2Please reply back and let us know if this can help.
Thank you
-
Original title: product key error
Hi all...
I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:"ERROR!" We encountered a problem with the request for approval.
What should I do now? Y does it can someone help me?
Thank you.Consider the following text:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
also check:
-
Authentication failed due to the error System.
After spending my fundamental problem with Burrito and 0.9.3 I advanced and made the PlayBook in 90-minute tutorial.
When running in mode 'on the desktop", the app works great and works.
When I change mode "On Device" and that the running virtual machine Simulator, then I get the following error:
Error occurred during the launch of the application installed on the device:
Error: Authentication failed because the system error...I tried to run it without the Simulator VM has started and got the error could not find the device. I also double checked the password, even if the VM simulator gave me a few problems when I changed passwords.
Anyone who encountered this problem?
On a side not, the .bar file was created for the application in the bin-debug folder.
Hey, Logan,
sounds like your conditioner ran finding, but when it came to deploy you stumbled upon an error. the only thing that comes to mind (as you already double check passwords) is either a firewall issue, you can check by turning off your firewall temporarily, or maybe your Simulator is not up-to-date (separate in the SDK installation). The latest version is the 0.9.3. Good luck!
-
key error 43, I need help I want to install the trial version of adobe first pro, I use a pc windows ultimate
Error 43 https://forums.adobe.com/thread/2070909
Also, is your Windows version required 64-bit?
-http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit
-
Activation product key error 0xC004e003 Windows
Hello
I reinstalled my computer from the recovery Partition on my laptop. I get an error of activation. I ran the diagnostics and got the report below.
I would appreciate help with this.
Thank you!
Product key -
BFF84-6GFC2-BWX77 Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - BFF84 - 6GFC2-BWX77
Windows product key hash: EkRG02noirn1etiserf2jJnVqlM =
Windows product ID: 00359-OEM-8992687-00017
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {0C7A6063-E726-452B-AEE4-8913F01664A9} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{0C7A6063-E726-452B-AEE4-8913F01664A9} 1.9.0027.0 6.1.7600.2.00010300.0.0.003 x 32 *-*-*-*-BWX77 00359-OEM-8992687-00017 2 S-1-5-21-1002781526-3844594362-3645351313 TOSHIBA Satellite Pro L450 TOSHIBA V1.00 20090903000000.000000 + 0006BB83607018400F8 0409 0409 W. Africa Central Standard Time(GMT+01:00) 0 3 TOSCPL TOSCPL00 100 100 Microsoft Office Enterprise 2007 12 6B9F48E4C912D86 pIL0Z2lfQn4O5OXzOdI6pqp4oiA = 89388-707-6733995-65795 14 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800017-02-1033-7600.0000-2712014
Installation ID: 002130265924655310639872664446247714948362252274339165
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: BWX77
License status: initial grace period
Time remaining: 36960 minute (s) on (25 day (s))
Remaining Windows rearm count: 3
Trust time: 28/09/2014-16:22:21Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current Hash HWID: MgAAAAEAAgABAAIAAAACAAAAAgABAAEAJJTi + 15den/aenDVrlhawtom1F/Sbzy Vrg plusActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP TOSCPL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC TOSCPL TOSCPL00
OSFR TOSHIBA HAS + 2ND ID
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRT(1) download an install KB971033
Description of the update for Windows Activation Technologies
http://support.Microsoft.com/kb/971033(2) try to activate by phone.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700What's the relationship between activation and genuine Windows?
http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-WindowsWhat is the validation, and how does it work?
Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7J W Stuart: http://www.pagestart.com
-
A problem when authentication via Radius ASA
Hi all
Please give me a helping hand. I have a problem when through ASA 5520 via Radius Authentication for ACS 4.0 via the VPN device. I need to configure secure authentication and NAC for remote user VPN. It simply does not work, but it works when you use Ganymede so all the connection seems to be ok as ACS succesfully authenticate a remote via MS AD VPN user when you use Ganymede. But I read that I can not use NAC when Ganymede using, I'm good? ASA and ACS journals indicate a problem with the shared key but I already double checked the key on both sides, the IP address is correct on SAA and I also tried all possible methods of RADIUS on SAA. Any idea where might be a problem?
Hello
When you use ACS 4.0, then make sure that the AAA Client for ASA entry you created on GBA, if under a NDG, then make sure that there is no key to the NDG level.
Otherwise, pass entry client ASA as RADIUS ACS in NDG (Unassigned) on ACS.
Kind regards
Prem
-
Hello
We currently have an ASA firewall, where users authenticate using RSA tokens. When we create a new user in LSF, the user name must match their user name of the AD. If the ASA use RSA for authentication radius server.
For our remote access VPN, we have several strategies Group on the ASA and ASA rights holders, the correct group policy based on the associated users in RSA RADIUS profile.
We would now abandon completely the RSA and use AD for authentication and an association of profiles. Can anyone tell if this would be simple. I want ASA to authenticate the VPN with AD users and assign a profile so that every user uses the appropriate group strategy
Thank you
Hello
It is possible to assign group policy with AD authentication for users in a particular group on AD. I guess it's good that AD you will mainly use LDAP for the same. Please go through the following links on more information:
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...
Concerning
Véronique
-
Failure of GBA 4.2 GANYMEDE + authentic. Incompatibility of keys
I have configured 10 switches(C3750-ADVIPSERVICESK9-M) of layer 2, Version 12.2 (40) SE), use GANYMEDE +. They are all using the same key and work correctly. I went to another switch 3750 located through a point-to-point circuit, software C3750 Cisco (C3750-IPBASEK9-M), Version 12.2 (35) SE5. I entered the configuration routine and then entered the key and tried to connect as a user and get authentication failed. I checked the server and see key discrepancies in the reports and activity, the attempt failed. I've removed the key, copied and pasted from Notepad, still does not work. Removed the switch in the network device group ACS and then re - he added, stuck a new key, without special characters. No go.
Here is the config.
AAA new-model
!
!
AAA of default login authentication group Ganymede + activate
local NO_AAA AAA authentication login
the AAA authentication enable default group Ganymede + activate
AAA authorization exec default group Ganymede + authenticated ifGanymede IP source interface FastEthernet0/0
GANYMEDE-server host 10.1.1.1
RADIUS-server key 0 itspassword
RADIUS-server application madeInitially, the password is encrypted, so I changed it to erase the text by typing the password without the 0 and with 0. None worked. Also removed encryption service to see if that would do anything.
I usually have SSH for router, so I changed it to accept telent. That did not work. Changed SSH, reset the rsa keys and modified so that it uses SSH2, which did not work.
Here's what I get from newspapers
August 12 at 11:43:24: TAC +: send worm package AUTHENTIC/START = 192 id = 97563278
August 12 at 11:43:24: TAC +: using Ganymede server-group "Ganymede +" list by default.
August 12 at 11:43:24: TAC +: opening TCP/IP 10.1.1.1/49 Timeout = 5
August 12 at 11:43:24: TAC +: handle opened TCP/IP 0x3663CA0 to 10.219.1.1/49 using the 10.2.2.254 source
August 12 at 11:43:24: TAC +: 10.1.1.1 (97563278) AUTHENTIC/START/CONNECTION/ASCII queued
August 12 at 11:43:25: TAC +: (97563278) AUTHENTIC/START/CONNECTION/ASCII processed
August 12 at 11:43:25: TAC +: received bad AUTHENTIC package: length = 6, should 80467
August 12 at 11:43:25: TAC +: invalid package AUTHENTIC/START/CONNECTION/ASCII (control keys).
August 12 at 11:43:25: TAC +: connection TCP/IP closing 0x3663CA0 to 10.1.1.1/49
August 12 at 11:43:25: TAC +: using Ganymede server-group "Ganymede +" list by default.
August 12 at 11:43:37: TAC +: send worm package AUTHENTIC/START = 192 id = 1015854339
August 12 at 11:43:37: TAC +: using Ganymede server-group "Ganymede +" list by default.
August 12 at 11:43:37: TAC +: opening TCP/IP 10.1.1.1/49 Timeout = 5
August 12 at 11:43:37: TAC +: handle opened TCP/IP 0x366AF24 to 10.1.1.1/49 using the 10.2.2.254 source
August 12 at 11:43:37: TAC +: 10.1.1.1 (1015854339) AUTHENTIC/START/CONNECTION/ASCII queued
August 12 at 11:43:38: TAC +: (1015854339) AUTHENTIC/START/CONNECTION/ASCII processed
August 12 at 11:43:38: TAC +: received bad AUTHENTIC package: length = 6, should 79092
August 12 at 11:43:38: TAC +: invalid package AUTHENTIC/START/CONNECTION/ASCII (control keys).
August 12 at 11:43:38: TAC +: connection TCP/IP closing 0x366AF24 to 10.1.1.1/49
August 12 at 11:43:38: TAC +: using Ganymede server-group "Ganymede +" list by default.I watched autour forum for about 4 hours, try all other options that were given to other people with a similar problem. The last key, in that I put has 123456. You can not fat finger that is. Switch journal said check the key, the firewall is configured to allow all traffic from the AAA client.
Hi green2003 mg,.
The substitution of key group (the NDG where your switch belongs to) the button. Have you checked that one?
Greetz,
Julia
-
I cucm 10.5 and Highway 8.2
I use no TLS connection. just trying to find the highway and cucm.
I can record jabber for iphone on IM & P inside.
CUCM and statues IM & P is good.
and that I changed my network to network outside on my wife's phone.
Jabber for iphone is registered on cucm. but IM & P is not...
so I restart a Jabber app and try again. It does not work all.
External DNS
SRV record: _collab - edge._tls.domain.com
_sip._tcp.domain.com
_sips._tcp.domain.com
_sips._tls.domain.com
inside DNS
SRV record: _cuplogin._tcp.domain.com
_cisco - uds._tcp.domain.com
VCS - c
1 CSR / download certificate signed CA / and x.509 certification authority root
2 traversal area (type =) through unified communications
VCS - e
1 CSR / download certificate signed CA / and x.509 certification authority root
2 traversal area (type =) through unified communications
status - unified communications
everything is good!
It's newspapers of vcs - e
2014-10 - 10T 17: 06:51 + 09:00 sshdpfwd [32043]: received disconnect from 203.228.204.1: 11: disconnected by the user 2014-10 - 10T 17: 06:50 + 09:00 "" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "child user is on the NEST 32043" elements UTCTime ="2014-10-10 08:06:50" 2014-10 - 10T 17: 06:50 + 09:00 "" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "publickey accepted for xxx.xxx.xxx.xxx port 12209 ssh2 pfwd: RSA + cert 8e:20:23:4 d: 5e:07:b9:89:84:3e:6 c: 10:58:66:47:cb" elements UTCTime ="2014-10-10 08:06:50" 2014-10 - 10T 17: 06:50 + 09:00 "" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "authorized by X 509 (rsa): CN = vcsc.daeshin.com, OR = O = cisco, cisco, L = cisco, ST = cisco, C = kr" elements UTCTime ="2014-10-10 08:06:50" 2014-10 - 10T 17: 06:40 + 09:00 "" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "12209 port 2222 xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx port connection" elements UTCTime ="2014-10-10 08:06:40" 2014-10 - 10T 17: 06:40 + 09:00 "" sshdpfwd: Event = "sshd" Module ="openssh" Level = "INFO" detail = 'sshdpfwd run in non-FIPS mode"elements UTCTime ="2014-10-10 08:06:40" 2014-10 - 10T 17: 06:40 + 09:00 "" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = 'value/proc/self/oom_score_adj to 0 value'elements UTCTime =' VCS - c
2014-10 - 10T 17: 08:51 + 09:00 "" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "bytes per second: sent 64953.8, received 39595.1" elements UTCTime ="2014-10-10 08:08:51" 2014-10 - 10T 17: 08:51 + 09:00 "" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "Transferred: sent 4672, received 2848 bytes, in 0.1 second" elements UTCTime ="2014-10-10 08:08:51" 2014-10 - 10T 17: 08:51 + 09:00 "" "ssh: Event ="sshd"Module ="openssh"Level ="INFO"details ="authenticated to vcse.daeshin.com ([xxx.xxx.xxx.xxx]: 2222)." "Elements UTCTime ="2014-10-10 08:08:51" 2014-10 - 10T 17: 08:40 + 09:00 "" "ssh: Event ="sshd"Module ="openssh"Level ="INFO"details ="key for the RSA host IP address + cert ' xxx.xxx.xxx.xxxnot in the list of known hosts." "Elements UTCTime ="2014-10-10 08:08:40" 2014-10 - 10T 17: 08:40 + 09:00 "" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "port Allocated 35525 for distance forwards to localhost:8443" elements UTCTime ="2014-10-10 08:08:40" is this wrong? The IP address of the RSA host key + cert ' xxx.xxx.xxx.xxxnot in the list of known hosts
Did you use FQDN in your way Express-e and c configuration? CSR was based on the host name or the IP address?
Did you use the hostname in your configuration of the crossing area or IP?
Have you tested using jabber for windows?
-
problem with authentication RSA on ESX 3.5
Hi guys,.
I am trying to configure a SSH + RSA encryption between my ESX Server and my computer connection / Virtual Center.
The objective here is to make plink command using the root (and after other account + sudo) account but passing without password.
So I used some of the things that is already inthere,
"How to create file keypar by dropbear http://..."but it's for ESXi and it use dropbear, which I don't have on ESX 3.5 (Finally I can't ^^).
So I use the keygen. Here are my actions:
-Make a ~/.ssh/authorized_keys with rights chmod 700
-generate public / private keys using the command ssh-keygen-b 1024-t rsa .
-copy the two files to ~/.ssh/authorized_keys with chmod 700 on them.
-copy the private key / public, using fastSCP on my PC.
-generate a ppk file using puttygen.exe
-change the PuTTY to access my ESX via a root autologon, put my file ppk on SSH auth (with RSA authentication).
-Save the change
-exemplary public key to Pageant.exe.
-change sshd_config to enable RSA / root login
-try to connect...
ESX is always ask for a password
any ideas appreciated!
Thomas
Hello
I am really convinced that it is not a good approach for a production data center to enable root SSH access. Data Center shown here, and I'm testing on is not production data center. It is a test which has by no means of access to the production data center. Two of them have no access to the internet. A quilting my correct computer is always possible, that's why I'm trying to ssh rsa encryption / access work. After I did this job with the root account, be sure to what I'm going to allow it with another account with sudo stuff.
I would inquire on how get what you want really work and not go the road to get the root work... The same steps apply to any user. But to get the root work, other measures. What you're trying to do is very well known in the Linux space. I use it all the time and never fallen on all issues. To do this, you need to be comfortable with a Linux style editor.
I don't understand why the publication of a public key is not good? This is not one I will use when it will work, but I assume that a brute force on a 2 with only the public key 1024 RSA key will take a lot of time? (Well I hope)
It is a good idea never to publish all the keys. Then you need not worry about this...
Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
Microstoft Office 2010 product key error
I find the sticker Office 2010 product key on the side of my computer. It came pre-installed. When I type in the product key, I get an error message saying that it is not "a valid product key. I double checked that I am not type the code in wrong and I can't find multiple copies of Office 2010 installed.
LetsGoPerds wrote:
I find the sticker Office 2010 product key on the side of my computer. ....
Hello
No, this isn't the Office product key, it is the Windows product key. Your machine has preinstalled TRIAL version. If you want to continue using it you have to buy the electronic identity card. I really hate this practice from suppliers and ALWAYS uninstall the trial version on my computers. Please visit the following link to buy the product key.
http://Office.Microsoft.com/en-us/buy/product-key-card-FX101850744.aspx
You can pay a lot cheaper for the Home & Student version and much cheaper, with a student ID card.
Kind regards.
-
'Invalid WEP key' error on 7410 All in one wireless set in place
My 7410 has been connected wireless for more than a year, but I just installed a new router (Linksys N600) and cannot get the connection Wireless upward. All other wireless devices are connected to the new router. Using WPA2-PSK [AES] security on the router. Using Setup on the front of the printer and it is fine network SSID location. But only allowing a WEP key and give me the error code whenever it is entered. Have tried to change the length of key on router to 5 or 13 characters and also tried 10 HEX digits. Have powered turn off/on the printer and reconstituted on network settings. No luck with anything. The Cisco router I had already installed was also a N Router - no problem of the 7410 wireless connection but try exchanged due to too many lost connections. Any advice?
I don't think that this printer supports WPA2. Try WPA.
-
rise of nations Gold: product key error
on rise of nations, I'm trying to install on my computer... my product key on the packaging does not match. What should I do? This is an older copy so I can't just Exchange it for a new
Hi Spartan6,
A. you are trying to install the game on another computer?
Do you have b. made a purchase online?
C. What is the exact error message?
Make sure that you type the correct characters. The following characters are often confused with each other:
o B and 8
o G and 6
o U and V
o Q and O
o the letter O and the number 0 (zero)
o the letter L and the number 1
Make sure you use the product key with the right product. Product keys only work for the product assigned to the product key.
If the previous methods do not resolve this problem, contact Support Services client Microsoft for help. Make sure that you have before you the error message when you call. Also, make sure you the product disk so that you can provide the number located on the inner circle on the disc.
To contact the Customer Support Services Microsoft, visit the following Web site.
http://support.Microsoft.com/OAS (http://support.microsoft.com/oas)
Select the appropriate product name, and you will be presented with options to contact the Support Services client Microsoft.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
why I can't use my computer with wireless network key error?
I have tried everything to get this sorted subject and makes me crazy I can connect with THE yellow cable but looks a mess when I wireless I can see the wireless link, but I get an error message that reads
THE NETWORK PASSWORD NEEDS TO BE 40BITS OR 104BITS DEPENDING ON YOUR NETWORK CONFIGURATION, THIS CAN BE ENTERED AS 5 OR 13 ASCII CHARACTERS OR 10 OR 26 HEXADECIMAL CHARACTERS.I SPOKE TO SKY AND THEY SAY IT COULD BE MY SETTINGS ON THE COMPUTER AND TO ASK HERE ANY HELP WOULD BE WELCOME THANKS CORDIALLY CHRISMake sure you have the latest Service Pack installed (SP3).
Go into your router and select Security WPA2-PSK(with AES) if it is available. Secure your computer wireless properties select WPA2-Personal security type and select the type of AES encryption.
Enter your password for the router and use the same password when connecting with your computer.
Do NOT enable authentication IEEE 802. 1 x on your computer or the router. In the router DO NOT select a type safety 'company '. Company type safety requires authentication IEEE 802. 1 x and IEEE 802. 1 x authentication requires a radius server, these methods of authentication are used usually only in the business circles.
John
Maybe you are looking for
-
Is it possible to change the external color of the iPhone?
I wanted to know if its possible to change the external color of the iPhone. My mother bought a pink iPhone, but she could not get used to it, so she gave it to me, and I want to know if its possible to pass to a rose grey. Thank you.
-
I have a netbook 10 ", how do I get the newtab page displays more than 3 thumbnails?
A few versions back (maybe mozilla 30?), the newtab page to view 9 thumbnails on my netbook 10 ". However, with recent updates, which was reduced to only 3. I know a netbook has a screen size much smaller than most of the computers and having more th
-
Satellite A110 - after Vista upgrade media control button does not
Hello, could someone help me? I upgraded my laptop Satellite A110 to Vista. Media button control does not work after upgrade to vista. Help, please...
-
Outlook does not not because I've updated to el capitan
Hi I have updated at el capitan and since then my outlook 2011 does not work, what can I do?
-
Date of purchase with the Dell 3008 PAM (30 '')
Hello We have a Dell 30 "monitor in the Office that we need more information, we have long since lost the paperwork and the monitor was purchased on the company's accounts. All we have is the model number and serial number (no service tag): CZ-0G501H