Satellite A110 - after Vista upgrade media control button does not

Similar Questions

• Satellite P300 - 148 Vista Ulimate - LED light button does not work

  My laptop model is Satellite P300-148.
  I reinstall system-vista Ultimate.

  However, after installation, my * mute button or LED light button * cannot be controlled by press mute.

  It's like, normally, when you press the mute, the light will be switched on or off.
  However, this is no answers when I press on it.

  I can only turn lighting on or off using Toshiba help.

  Also when I press the "play" button, the windows media player has no more answers.

  So is it a solution? Or drivers?
  Thanks for the reply.

  Hello

  I think that these buttons don t work properly due to the Vista Ultimate.
  I checked some threads here and it seems that the PPV that controls this Toshiba buttons don t support the ultimate or the ultimate doesn't fully support the VAP.

  But just a question;
  Did you check the Toshiba Assist-> Optimize-> Toshiba button Support?
  This tool allows you to configure the buttons. Maybe you should check this.

• Media control buttons do not work on Qosmio F40

  Sometimes I had to format my HARD drive... and I've used the two DVD that came with my laptop... the thing is, there are two things missing. Sure that the media control buttons work altogether, only some of them... And there was a slide the top panel that looks like the keys FN + Fx... How can I return these two things?

  Well as far as I know, and everything is ok
  I had to format the HARD drive, but its ok too. (maybe its different on F30)

  only I had problems when connected left external HARD disk
  This toshiba recovery disc tried to install on the external, formatted and found out that it won't :D

• Touchpad no longer works on Satellite A200 after Vista upgrade

  Does anyone know why the touchpad stopped working - it happened after an upgrade of Windows Vista Edition family.
  External USB mouse is ok, but the touchpad is not responding.

  Any help would be great. Thank you

  Maybe don t answer touchpad drivers and are muddled up.
  Remove the touchpad of the system driver and reinstall it again.

  The touchpad drivers are available on the European driver Toshiba page.

  Reinstall it and try again!

  PS: You should first check if the touchpad is not disabled!

• Why the media control buttons do not work

  my computer is a toshiba M300 series

  Hi manumartinez,
   
  -The multimedia keys worked without any problems before?
  -If Yes, what is the recent change that was made on your computer after that this problem started to happen?
   
  Follow the suggestion given in the link below and check if it helps you to fix the problem:
  Multimedia keys don't go off when computer stops
   
  If this does not work, contact Toshiba support for assistance on this issue.

• Component security update windows media player button does not work.

  I tried to upgrade the safety component of windows media player when you place a digital copy of a movie, but does not have the button "upgrade". He sent me to this site: http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp is there a way I can spend?

  Hello

  1 did you change on your computer?

  2. what web browser do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Step 1:

  Try to use only Internet Explorer.

  Step 2:

  Right click on Internet explore and run it as an administrator.

  Step 3:

  You can try to reset the DRM store on the computer and check if that helps you solve the problem. To do this, follow these steps:

  a. Locate the DRM folder on the hard disk, and then rename the folder to DRMbackup DRM.
  Note By default, this folder is located in the following location in Windows 7: %SystemDrive%\ProgramData\Microsoft\Windows\DRM

  b. visit the following Microsoft Web site:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp (http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp)

  c. follow the instructions on the website to update the safety component of Windows Media Player. This procedure allows you to obtain new licenses for media content. You can also reset licenses for purchased content so that you can play that content on a computer.
  Note on a Windows 7 computer, you must run Internet Explorer as an administrator before update you the safety component of Windows Media Player. To do this, follow these steps:
  a. Click Start and then click all programs.
  b. right-click Internet Explorer, and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Also, you can access the link below for more information about how to reset the DRM in Windows.

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11D7&OriginalID=C00D2760

  Method 2:

  When you try to use Windows Media Player 11 to play a digital camera digital rights management (DRM) - multimedia file protected, the media can not play

  http://support.Microsoft.com/kb/925705

  WARNING This procedure affects all media files on the computer that use Windows Media DRM technology. The effect of this procedure is not limited to media files that you have obtained from the Zune Marketplace. If you follow this procedure, content licenses for all multimedia files protected on the hard disk are deleted. Other providers, such as Napster, Netflix, MSN Music, and Wal-Mart, may have mechanisms for restoring licenses. If you have content from other providers, consider strategies to restore appropriate license before continuing.

• Vista upgrade to windows 7 does not and could not roll back to vista

  I bought a retail pack for the Windows 7 upgrade. I tried to install it yesterday evening - took to always (more than 4 hours) and froze in several places for more than an hour. At the last second stage (installation of windows features) - he crashed and closed. Reboot, it says "set to level failed - rolling to the previous operating system". After about 1/2 hour of rolling back - it crashed again - blue screen "STOP: c000021a.» System fatal error. Process of initial session or the processes of the system ended unexpectedly with an error code of 0 x 000000000 (0xc00000001 0x0010037c). system was stopped.

  the laptop (a Dell Studio 1555) cannot be started and is not an operating system. A terrible catastrophe for what seemed like a simple upgrade. I followed all the instructions in the Windows tutorial "upgrade Windows vista to windows 7 ', no warning that I should set out a clean boot which I've since found in blogs. I'm mad at Microsoft for releasing a product that will destroy my system when you follow their instructions.

  I obviously need to re - install an OS - my question is... I have an other laptop Dell Studio 1555 which came with windows 7 and I have the installation disc. Can I use this disc to do a fresh install on this laptop and use the product key that came with Windows 7 upgrade disc?

  Otherwise, it will be a long and difficult process of re - install Vista, upgrade to SP1 and upgrade to Windows 7, and then potentially have fail again. Please notify.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Satellite U920T - duplex cam + touch screen + win button does not work

  I have the problem as the touch screen + frontal camera + camera rear windows on the screen button do not work.

  I tried to install the drivers to display/graphics but that has not helped.

  I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country, so I can't ask the warranty as well.

  someone please fix this and tell me the solution, or tell me what I need to do?

  Help will be really appreciated.
  some details on my laptop:

  Toshiba Satellite U920T-B919.
  Windows 8.1 updated 64-bit.

  Thank you

  Since you mentioned different problems with your laptop, I think that in this case its recommended to get the laptop back to factory settings just to check if all these problems are related to the problem of system.

  Regarding the webcam: Windows 8/8.1 already contains the webcam drivers and therefore additional webcam driver installation isn t possible. Extra webcam driver is not simply.

  From my point of few smells of any description as a bit of a problem of material, the upper part of the slide where the touch screen is part of.
  The key win as well that the two cams are located and there are probably some lose the connection between the two parties (touchscreen and keyboard)

  Anyway, as I said more top, its recommended to recover the laptop to factory settings just to make sure that the system isn t the troublemaker.
  In case of hardware problems, you must get in touch service available in your country.

• Satellite M70 - after HARD drive partitioned, the OS does not start

  Hello

  Good then this is a real doozy, and I hope that someone will help.

  I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

  Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

  I rebooted, and then after Windows restarted again completed.

  NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

  If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

  I'm really angry that this has happened and I just want to start over again.

  Can someone help me with this?
  I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

  Help, please.

  Thank you
  SG

  I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

  To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
  Check it!

• LaserJet Pro M177FW MFP: Laserjet Pro M177FW MFP control button does not work

  I've seen other messages on how to reset the printer to try to get the touch screen to work, but none of this does not work for me. It allows to work at the time of purchase, but after all these updates, it is not.

  Is there a way to send the copy command to the printer without using this form?

  Hi @jshelby41,

  Welcome to the Forums of HP Support! I see that you are having problems with the touch screen not working not. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• Satellite A110-137: serial USB 1.1 Cable does not work

  My computer is Satellite A110-137 and the operating system is Windows XP Home Edition v 5.1 service pack 2. Language setting is the Finland.

  I have a prolific USB driver cable RS232 2.0.0.26 version 1.1.

  It does not at all. When I try to connect it to a package Kantronics KAM radio modem using Hyper Terminal there is an error COM3 message: ei voi games. Tarkista porttiasetukset. (COM3: cannot open.) Check the port settings).

  The settings that I have are 9600 bps, 8 data bits, zero parity, 1 stop bit, hardware flow conrol. It's the same thing in device driver settings and the settings of the Hyper Terminal. It is 100% sure that the problem is somehow related to Toshiba or Windows XP as the same USB converter RS232 perfectly works and right the first time with for example Fujitsu ErgoPro have Windows 2000 (and it's a machine Pentioum 233, very old stuff indeed).

  I can't get any help of Prolific, their home pages seem to be offline now.

  Hello

  I studied a little on the net and it seems that this converter RS232 USB 1.1 creates a virtual serial port (possibly the com 3)
  As far as I know the built-in modem is using the same port.
  Possibly there could be compatibility problems.

  However, this is not a product of Toshiba and this is why I would recommend contacting support of the prolific.
  I've been on the site and it of online.

• Satellite P200 (PSPB6E): Vista downgrade to WXPPro SP2 does not work

  Hello
  After reading many FAQ and the wire, it does not work.
  I need to use software that does not work with Vista (EDU PRO4)
  so...

  I download and install the latest player to find in the support of intel to
  [Intel site | http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go % 21]
  so that I can get the driver for my XP support and burn it to a cd

  I do downgrade my bios
  I do a Cd with driver for my drive HARD (I have no usb floppy)
  I get F6
  I enter S (is not read or see to find any driver on my cd)
  Installation system still not recognize the HARD drive!

  Work always thankfully Vista so that I can post this message, please help
  Thank you

  My config is
  Motherboard
  82801HEM (ICH8M-E) LPC Interface Controller

  Hard drive
  Intel(r) 82801HEM/HBM SATA AHCI Controller

  I had the same problem...

  Try using NLite
  With this free tool, you can create a custom XP install disc (of course you need a working pc to run this tool...).

  He images your cd xp and you have the option to add drivers. the pilots, you add to the installation of xp to work are in the zip "Intel Matrix Storage Manager - 7.5.0.1017" [link: http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport2.toshiba-tro.de%2ftedd-files2%2f0%2fstormng-20070827133046.zip]

  I used the drivers in the ICH8M_32bit directory.

  Somewhere in this forum that employment is better explained, I also found here.
  Good luck!

• Headphone control buttons does not work

  Hello

  I just used my V - Moda Crossfade LP to listen to the music and tried my control buttons. They do not work so I tried a few Ks AKG and buttons do not work also. Do I have to download an app or?

  A solution would be really nice!

  Hi Chris9292,

  As far as I know, these models are manufactured for Apple devices. There could be some compatibility issues at a Xperia device with buttons and the microphone. For example, if you click on the following link:
  http://v-Moda.com/crossfade-LP/

  They include the following: cable microphone 3 remote buttons control calls and music, as well as the volume on most smartphones and tablets, including the latest Apple devices, including the iPhone, iPad, iPod and Macbook (only compatible with Apple products volume)

  A third party may be accessory need more power than the phone can provide some. (If possible), I suggest that you connect Sony headphones to use this device to see if you encounter the same behavior.

• Window control buttons does not work

  In each open window of the Min/Max/close buttons are broken. They appear, react to the mouse over, but are not min/max/close when you click on it. It is quite possible, I chose a weird option when messing around in the preferences, but it seems weird to leave in a menu.

  Shortcuts keyboard seem to work very well, but do a right-click on the title of the window in the bar of tasks leads to the open window, min/max/close not either.

  Help?

  It looks like maybe a whole lot of file system got corrupted (those that control windows functions) - and it's kind of logic because it would make sense that they are somehow in the same place.  I hope that SFC or chkdsk can repair corruption and fix the problem - otherwise we will have to do a re-install (but we'll wait and see what happens with the rest of the procedures before launch us the firearm).

  I'm sorry the system restore does not work - this is one of the best tools to deal with this type of problem (this is why I normally suggest it first).

  Good luck and thanks for the update.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the Java Update, Pinterest button does not work

  Pinterest worked very well. I was invited to do a Java Update I did. Pinterest Pin button it stop working. I deleted the old versions of Java and I checked to make sure that the newly revised version has been activated. I deleted and reinstalled the Pinterest button.
  When I click on it nothing happens, but the text box that appears under the button out with javascript stars; void ((function
  and then continues with a lot of code, but I can't copy and paste the entire text box as it disappears quickly.

  Here is a page where I can't use Pinterest button for example http://www.horsekeeping.com/jewelry/p.../NP407-feather-turq-begay.htm

  I get the same error on this page. It seems that Pinterest expects to have at least a script page, and the page does not. This should be fixed by Pinterest. In the meantime, you can inject an empty script element in the page by using the Web Console:

  • Select and copy the following line of code (that's a whole line) to the Clipboard

  var s=document.createElement("script");s.setAttribute("type","text/javascript");document.body.appendChild(s);
  

  • On the problem page, if you have already tried the Pin button, reload the page
  • Press Ctrl + Shift + k to open the Web Console
  • Paste the script code into the Web Console next to the circumflex accent (>) and press ENTER to run it
  • You can close the Web Console now and try the Pin button it