authentication with Cisco anyconnect
Hello world
With client anyconnect, how is managed authentication via the web portal? It is dependent on the Explorer (= logoff window) or IP address?
Authentication can invoke an external server (AD or LDAP) to be able to add users or groups?
concerning
Hello
For anyconnect, you will define a tunnel-group. You can set the authentication server in the tunnel group. By default, the authentictaion is made with the local database.
tunnel-group hillvalleyvpn general-attributes
authentication-server-group < authentication server name>
Hope this helps.
Regards,
AnishaP.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.
Tags: Cisco Security
Similar Questions
-
IPsec VPN with Cisco AnyConnect and 1921 ISR G2 router
Hello
Is it possible to establish a remote access VPN IPSec using Cisco Anyconnect client with router Cisco ISR G2 1921.
If someone does share it please the sample configuration. as I've been on this topic since last week a.
My Cisco rep recommended I have not try AnyConnect a router ISR or ASR. So I used an Open Source client. Don't say that AnyConnect won't work, just the route I took on my project. I work good known configuration for a 1921 with strongSwan as a Client. It is with IPSEC and IKEV2 using certificates for authentication.
-
double authentication with Cisco's VPN IPSEC client
Cisco VPN client (the legacy IPSEC client) does support dual authentication with RSA token AND ActiveDirectory credentials?
I know that AnyConnect supports it and the commandsecondary- authentication -Server- group' is only for ssl connections, but must be confirmed.
Kind regards
Mohammad
Hi Mohammad,.
What is double authentication support for Cisco VPN Client?
A. No. Double authentication only is not supported on the Cisco VPN Client.
You can find more information on the customer Cisco VPN here.
As you said the only client that supports dual authentication is the Cisco AnyConnect secure mobility Client.
Please note and mark it as correct this Post!
Let me know if there are still questions about it!
David Castro,
-
Setup for use with Cisco Anyconnect VPN IPsec
So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.
I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.
NOTE: We are still testing this ASA and is not in production.
Any help you can give me is greatly appreciated.
ASA Version 8.4 (2)
!
ASA host name
domain.com domain name
!
interface Ethernet0/0
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 50.1.1.225 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
No nameif
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa842 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
!
permit same-security-traffic intra-interface
!
network of the NETWORK_OBJ_192.168.0.224_27 object
subnet 192.168.0.224 255.255.255.224
!
object-group service VPN
ESP service object
the purpose of the tcp destination eq ssh service
the purpose of the tcp destination eq https service
the purpose of the service udp destination eq 443
the destination eq isakmp udp service object
!
allowed IP extended ip access list a whole
!
mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool
no failover
failover time-out period - 1
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary
!
the object of the LAN network
NAT dynamic interface (indoor, outdoor)
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
Sysopt noproxyarp inside
Sysopt noproxyarp outdoors
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ASA
Configure CRL
crypto ca server
Shutdown
string encryption ca ASDM_TrustPoint0 certificates
certificate d2c18c4e
864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105
0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e
365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2
8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782
3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1
cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 10
Console timeout 0
management-access inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
profiles of AnyConnect VPN disk0: / devpn.xml
AnyConnect enable
tunnel-group-list activate
internal VPN group policy
attributes of VPN group policy
value of server WINS 50.1.1.17 50.1.1.18
value of 50.1.1.17 DNS server 50.1.1.18
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
digitalextremes.com value by default-field
WebVPN
value of AnyConnect VPN type user profiles
always-on-vpn-profile setting
privilege of xxxxxxxxx encrypted password username administrator 15
VPN1 xxxxxxxxx encrypted password username
VPN Tunnel-group type remote access
General-attributes of VPN Tunnel-group
address (inside) VPNPool pool
address pool VPNPool
LOCAL authority-server-group
Group Policy - by default-VPN
VPN Tunnel-group webvpn-attributes
enable VPN group-alias
Group-tunnel VPN ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
class-map ips
corresponds to the IP access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
class ips
IPS inline help
class class by default
Statistical accounting of user
I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)
Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.
I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.
As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)
-
HotSpot iOS 9.3.1 works do not with Cisco AnyConnect
Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect. I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.
Ideas?
TIA,
DM
Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.
I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.
What is happen? I work with this feature and now I need to change the phone!
-
ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone
Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...
We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.
This is the phone that we seek;
I want to know is the Anyconnect Essentials license will work with these IP phones?
When I do a version of the show,
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes a basic license.
It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?
Hi Leo,
you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»
ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.
CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574
HTH
Herbert
-
Two factor authentication to cisco anyconnect using certificates
I plan to factor authentication two configuration, and intend to buy thawte Certificate, but need help to choose which certificate do I need to buy. Can I purchase a code signing ssl certificate and use it to two-factor authentication? If this is not the case, what should I buy and what is the procedure?
Concerning
NH
Hi, NH,
I see that you have authentication two factor for customers who connect to your network by using AAA + certificates head.
I also see that you are looking to get the signed certificate from Thawte.
> In two authentication factors in your scenario, the client when the connection must present the name of user and password and a client certificate to complete the authentication.
> You can get the client signed any Public certificate authority (CA) certificate.
> The certificate with the key usage extension attribute value, such as the authentication of the Client can only be used by the client during client certificate authentication.
> If extended key usage does not 'Authentication of customer' as one of its value then this certificate cannot be used for authentication of the client certificate.
> Now, once you get the client certificate and installed it on the post, and currently the head of network during authentication may fail once again validating the certificate of the network head as it is necessary that the head of network must have the certificate root certificate Client installed in his store of Certificate Authority (CA).
Kind regards
Nouredine Sethi
-
AnyConnect authentication with RADIUS secure method
I was able to correctly configure Cisco AnyConnect VPN on ASA 5520 with code 8.4. I put it to authenticate to the RADIUS (Microsoft Windows 2008 Server NPS server) server. I noticed something on the server under "constraints and the method of authentication. I chose MS-CHAP-v2, but it is considered less secure authentication methods. I can click on Add and choose other methods of authentication such as smart card or other certificate, PEAP, EAP-MSCHAP VERSION 2. I chose PEAP, but then the VPN does not work.
So first of all is it really important if I just leave it to MS-CHAP-v2? Because from my understanding is that AnyConnect authenticate with the ASA and then ASA in the backend communicates with the RADIUS server to security point of this scenario should - not be enough as no UN encrypted or secure less information is available to the outside world?
Secondly there is a documentation on the use of PEAP with Cisco AnyConnect?
AnyConnect supports EAP-GTC, EAP-MD5 and EAP-MSCHAPV2.
From the safety point of view, it does not matter much what you use as IKE still will be encrypt traffic between the client and the head of the line.
Between the head and the RADIUS, the password is encrypted as well.
From a to z, you good to go.
See you soon,.
Olivier
-
Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.
I have win 7 x 64 enterprize edition on my laptop.
I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.
But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.
Please help me to solve this problem as soon as possible.
Hi Manish,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.
I also recommend that you contact the VPN support to help:
https://supportforums.Cisco.com/community/NetPro/security/VPN
-
Hi guys
I have a Cisco ASA5520 with software Version 8.2 (5) in place, most my users are Mac users and I am currently looking into Cisco AnyConnect in comparison using the VPN client.
I have a few questions
(1) Cisco AnyConnect does he use IPSec or is it soley based SSL VPN?
(2) the license information I have in my ASA below, I understand that I can get max 750 vpn peers am however I have reason to say that this does not apply to Cisco AnyConnect peers? and with Cisco AnyConnect, I can only have 2 peers? Also, what are the options for mobility anyconnect for?
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 150
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
Total of the VPN peers: 750
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
(3) when you try to configure Cisco Anyconnect on the SAA by using ASDM, I noticed that I needed to download AnyConnect client images, but when I did this by downloading the .dmg for mac machines file I got the error message 'not an image valid of the SVC'. Is it because I'm under 8.2?
Your help is highly appreciated
Concerning
Mohamed
Hi Mohammad,.
I'll answer your questions one by one:
1 cisco Anyconnect version 3.0 and above all support SSL and IPSECv2 connection. If you want the user to connect using the Anyconnect client IPSECv2 then it will consume the SSL license and not the IPsec license however if you use IPSECv2 for connections such as vpn site to site then it will consume normal IPSec VPN license.
2. one. SSL VPN peers: this license gives you information about the number of users that can connect using SSL protocol for example using the Anyconnect and web portal customer also known as the clientless VPN based on. I see here there are only 2 licenses so at any given time only 2 users can connect successfully because 750 is the total number of licenses available for the VPN on the SAA, 698 only will be available for IPSec connections.
b. Anyconnect for mobile: this license is required whenever a user connects from a Pocket like device: Iphone, Ipad, tablets etc.
c. Anyconnect of Cisco VPN phone: Cisco IP phones have the ability to connect to an ASA remote using the SSL protocol and to enable this feature, you should have this license is activated on the SAA.
d. Anyconnect essentials: Anyconnect there are two licenses, one > Anyconnect Premium and b > Anyconnect Essentials. AnyConnect essentials is less expensive as premium per report Anyconnect license. This license is for those who don't use webvpn or VPN without client. When the license is activated, the user can connect only to the Anyconnect VPN client.
3. I don't know what image you use on the ASA. Please try the image named as anyconnect-macosx-i386 - 2.5.2010 - k9.pkg.
To apply the changes using the command line, put this image on disk0: and then type this command on the CLI.
Image disk0:/anyconnect-macosx-i386-2.5.2010-k9.pkg SVC
Let me know if it helps.
Thank you
Vishnu Sharma
-
Patch authentication LEAP Cisco space required for Windows 7 64 bit Home Edition
Hi all:
I tried both Vista Business 32-bit PC and Windows 7 Home edition 64 bit for Cisco LEAP Authentication. The result is that Vista Bz PC can have authentication option Cisco LEAP under wireless security option, Windows 7 Home Edition 64 bit does not. After select, it works with the authentication LEAP of Cisco AP1041N.
May I know that Cisco can provide the patch driver file for authentication on Windows 7 64 bit home edition LEAP so that I can make authentication wireless on Cisco AP1041N?
Or any body knows a way to get this Windows 7 64 bit home edition to work with authentication with Cisco AP1041N LEAP?
Many thanks in advance and best regards,
tangsuan
Tang,
It seems that you can not use jump unless u install intel proset "supplicant" that supports only the drivers intel.
CHECH the link
http://www.SevenForums.com/network-sharing/3084-security-wireless-Cisco-leap.html
So it seems that give u the option for Cisco leap in windows vista is a software provided by intel. Microsoft or Cisco.
If you have intel driver u better contact intel if you want jump built in. If not then I don't know if anything will make leap to work built into windows. You need a global independent "supplicant".
HTH
Amjad
-
Cisco 1700 Setup as a hub for Cisco Anyconnect VPN
The complete configuration for the router is attached. Additional configuration includes forwarding port 443 (the two tcp/udp), udp 4500, udp 500 and udp 50 to 192.168.1.20.
Objective: Configure Cisco 1700 router as a VPN server, which a Cisco Anyconnect VPN client in. The VPN server is behind a NAT.
Question 1: The Cisco Anyconnect client pulls its set of configuration of the router? I just need to point to the correct IP address and hit connect and it will do the rest? If not, what additional client side configuration must be done? I noticed, it tries to connect on port 443 to my router, but I don't really know why and I know that my router is not listening on this port, so I know I'm missing something:-D.
Question 2: What are the features specifically include easy vpn server? I am confused as to exactly what it is. From what I can tell when you configure easy vpn server you simply set up a regular VPN.
Question 3: Cisco Easy VPN remote has something to do with Cisco Anyconnect or they are completely distinct?
Sorry for the newbie questions. It's really hard to understand the different systems and features on it and most of the examples I found dealt with the VPN router to router rather than configurations just for computers of end users, but I'll be the first to admit that I am new on this hahaha.
Thanks for your help.
PS: Any comment on the misconfigs are welcome. I'm still trying to understand fully exactly what each command does.
Grant
Grant,
AnyConnect can do SSLVPN or IPsec (with IKEv2), ezvpn is all about IKEv1, it won't work.
There (part 3) customers who will be able to connect to ezvpn, as well as the former customer Cisco VPN, but AC is not.
BTW... it's not 50/UDP, this is IP protocol 50 (or sometimes 51) - ESP (or AH).
You don't have TCP and UDP 443 for IPsec, but you may need them for SSL.
And seriously... series of 1700? Wow, this is a 'retro' kit :-) Support ended 6 years ago.
M.
-
AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2
Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type
Type of TG_TEST FW1 (config) # tunnel - group?
set up the mode commands/options:
Site IPSec IPSec-l2l group
Remote access using IPSec-IPSec-ra (DEPRECATED) group
remote access remote access (IPSec and WebVPN) group
WebVPN WebVPN Group (DEPRECATED)FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
FW1(config-tunnel-IPSec) #?configuration of the tunnel-group commands:
any required authorization request users to allow successfully in order to
Connect (DEPRECATED)
Allow chain issuing of the certificate
output attribute tunnel-group IPSec configuration
mode
help help for group orders of tunnel configuration
IKEv1 configure IKEv1
ISAKMP policy configure ISAKMP
not to remove a pair of attribute value
by the peer-id-validate Validate identity of the peer using the peer
certificate
negotiation to Enable password update in RADIUS RADIUS with expiry
authentication (DEPRECATED)FW1(config-tunnel-IPSec) # ikev1?
the tunnel-group-ipsec mode commands/options:
pre-shared key associate a key shared in advance with the connection policyI'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)
Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..
But it would be nice to have a bit more security on VPN other than just the connections of username and password.
If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?
If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?
I really hope that something like this exists still!
THX,
WR
You are welcome
In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.
With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.
-
Authentication PEAP with Cisco ACS 5.3 and Lotus Notes DB
Hello
I want to authenticate clients wireless against the name of user/passwords stored in a lotus notes database.
Network: PEAP SSID-> Accesspoint-> controller-> ACS 5.3 WLAN 4404-> Notes DB
Is this possible?
I can connect to the attributes and ldap groups and query. but when I try to authenticate a user, I always get an error "object not found in the identity store.
Bind test succeeds (> 100 groups and > 100 subjects.)
EAP MSCHAP v2 is not taken in charge with LDAP by ACS
You can use EAP GTC
You should a begging utility that supports PEAP (EAP-GTC)
such as ADU, Intel Proset, CSSC Cisco AnyConnect,... you can google for a list of applicants
Open the new thread for cause of Apple
------------------------------------------------------------------
Be sure to note the correct answers and report this thread as answered
-
Cisco ISE 1.3 - Mab authentication with a vlan for each foor
Hello
A client wants to implement authentication MAB with a vlan for each floor. I found a solution of Loïc
I have set up the following:
-the profile of different authentication with a vlan different.
-Add the endpoint (printer etc) endpoint identity.
-create endpoint group identity that end point of recall.
-create a rule to authorizzation reminding all work and element... in the end.
Do you know if there is a faster way where another way to solve the problem?
Thank you all
Well, mab in some environments, could be replaced by profiling and for rules, rather af with a rule authz for each floor, you can name your VLAN in your eponymous switches to "Printers", in the world, then you would only need an authz rule, where you use the name of the vlan instead of identification number, so no matter where this printer , it will end in the vlan 'Printer', whatever it is in this specific switch.
Maybe you are looking for
-
I'm unable to uninstalll the Yahoo on the latest Firefox toolbar.
I use Firefox 16.01 and I have read and tried the above, without success. The Yahoo toolbar is not simply disappear. Rather, there are malware.
-
HP Pavilion dv7 6c43cl: problem with HP Pavilion dv7 admin password request
HP Pavilion dv7 with windows 10 with a log in request to enter the administrator password or power on password, disable the 69394915 code. Help please thanks
-
Photosmart 2710 drivers for Windows 7, where can I find them?
Hello! I need to find the drivers for the printer all-in-one Photosmart 2710 for Windows 7 64 bit, but they are not available for download on the website of Hewlett-Packard. I can not find anywhere on the internet... Any help? Thank you!!
-
I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?
-
How can I play my old computer games on vista
How can I play my old computer games on vista