double authentication with Cisco's VPN IPSEC client

Cisco VPN client (the legacy IPSEC client) does support dual authentication with RSA token AND ActiveDirectory credentials?

I know that AnyConnect supports it and the commandsecondary- authentication -Server- group' is only for ssl connections, but must be confirmed.

Kind regards

Mohammad

Hi Mohammad,.

What is double authentication support for Cisco VPN Client?

A. No. Double authentication only is not supported on the Cisco VPN Client.

You can find more information on the customer Cisco VPN here.

As you said the only client that supports dual authentication is the Cisco AnyConnect secure mobility Client.

Please note and mark it as correct this Post!

Let me know if there are still questions about it!

David Castro,

Tags: Cisco Security

Similar Questions

Setup for use with Cisco Anyconnect VPN IPsec

So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.

I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.

NOTE: We are still testing this ASA and is not in production.

Any help you can give me is greatly appreciated.

ASA Version 8.4 (2)

!

ASA host name

domain.com domain name

!

interface Ethernet0/0

nameif inside

security-level 100

the IP 192.168.0.1 255.255.255.0

!

interface Ethernet0/1

nameif outside

security-level 0

IP 50.1.1.225 255.255.255.0

!

interface Ethernet0/2

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

No nameif

security-level 100

IP 192.168.1.1 255.255.255.0

!

boot system Disk0: / asa842 - k8.bin

passive FTP mode

DNS domain-lookup outside

DNS server-group DefaultDNS

!

permit same-security-traffic intra-interface

!

network of the NETWORK_OBJ_192.168.0.224_27 object

subnet 192.168.0.224 255.255.255.224

!

object-group service VPN

ESP service object

the purpose of the tcp destination eq ssh service

the purpose of the tcp destination eq https service

the purpose of the service udp destination eq 443

the destination eq isakmp udp service object

!

allowed IP extended ip access list a whole

!

mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool

no failover

failover time-out period - 1

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 645.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary

!

the object of the LAN network

NAT dynamic interface (indoor, outdoor)

Access-group outside_in in external interface

Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1

Sysopt noproxyarp inside

Sysopt noproxyarp outdoors

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 proposal ipsec 3DES

Esp 3des encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES

Esp aes encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES192

Protocol esp encryption aes-192

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 AES256 ipsec-proposal

Protocol esp encryption aes-256

Esp integrity sha - 1, md5 Protocol

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

Crypto ca trustpoint ASDM_TrustPoint0

registration auto

name of the object CN = ASA

Configure CRL

crypto ca server

Shutdown

string encryption ca ASDM_TrustPoint0 certificates

certificate d2c18c4e

864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105

0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e

365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2

8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b

37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c

234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782

3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02

03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1

cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc

18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6

beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef

af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398

quit smoking

IKEv2 crypto policy 1

aes-256 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 10

aes-192 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 20

aes encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 30

3des encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 40

the Encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

Crypto ikev2 activate out of service the customer port 443

Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 65535

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 10

Console timeout 0

management-access inside

SSL-trust outside ASDM_TrustPoint0 point

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2

AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3

profiles of AnyConnect VPN disk0: / devpn.xml

AnyConnect enable

tunnel-group-list activate

internal VPN group policy

attributes of VPN group policy

value of server WINS 50.1.1.17 50.1.1.18

value of 50.1.1.17 DNS server 50.1.1.18

Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client

digitalextremes.com value by default-field

WebVPN

value of AnyConnect VPN type user profiles

always-on-vpn-profile setting

privilege of xxxxxxxxx encrypted password username administrator 15

VPN1 xxxxxxxxx encrypted password username

VPN Tunnel-group type remote access

General-attributes of VPN Tunnel-group

address (inside) VPNPool pool

address pool VPNPool

LOCAL authority-server-group

Group Policy - by default-VPN

VPN Tunnel-group webvpn-attributes

enable VPN group-alias

Group-tunnel VPN ipsec-attributes

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

class-map ips

corresponds to the IP access list

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

Review the ip options

inspect the netbios

inspect the rsh

inspect the rtsp

inspect the skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect the tftp

inspect the sip

inspect xdmcp

inspect the http

class ips

IPS inline help

class class by default

Statistical accounting of user

I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)

Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.

I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.

As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)

Cisco's VPN IPSec client for LAN connectivity

I've looked through further discussions and were not able to find a clear answer on this, so I apologize if this is a duplicate question.

I have the client setup Cisco VPN on an ASA 5505 with tunneling split. I can connect to the VPN very well. I can access the internet fine. I can't get the LAN, however. I try to do a ping, telnet, rdp, etc devices on the side LAN of the firewall without a bit of luck. I have torn down and configure the VPN several times via the CLI and I even used various configurations by using the wizard, all this without a bit of luck. Any help would be appreciated.

ASA Version 8.2 (2)

!

hostname spp-provo-001-fwl-001

domain servpro.local

activate the F7n9M1BQr1HPy/zu encrypted password

F7n9M1BQr1HPy/zu encrypted passwd

no names

name 10.0.0.11 Exch-Srv

name 10.0.0.12 DRAC

name 10.0.0.10 DVR

!

interface Vlan1

nameif inside

security-level 100

the IP 10.0.0.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

ServPro PPPoE client vpdn group

IP address pppoe setroute

!

interface Vlan12

nameif Guest_Wireless

security-level 90

IP 10.10.0.1 address 255.255.255.0

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

switchport access vlan 12

!

exec banner * only authorized access *.

exec banner * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. *

connection of the banner * only authorized access *.

connection of the banner * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. *

banner asdm * only authorized access *.

banner asdm * this system is the property of ServPro. Unplug IMMEDIATELY that you are not an authorized user. *

boot system Disk0: / asa822 - k8.bin

passive FTP mode

clock timezone STD - 7

clock to summer time recurring MDT

DNS lookup field inside

DNS server-group DefaultDNS

10.0.0.11 server name

Name-Server 8.8.8.8

domain servpro.local

DRACServices tcp service object-group

EQ port 5900 object

EQ object of the https port

EQ object Port 5901

object-group service Exch-SrvServices tcp

EQ port 587 object

port-object eq 993

port-object eq www

EQ object of the https port

port-object eq imap4

EQ Port pop3 object

EQ smtp port object

SBS1Services tcp service object-group

EQ port 3389 object

port-object eq www

EQ object of the https port

EQ smtp port object

outside_access_in list extended access permit tcp any host *. *. *. * object-group SrvServices Exch

outside_access_in list permits all icmp access *. *. *. * 255.255.255.248

capture a whole list of access allowed icmp

Servpro_splitTunnelAcl list standard access allowed 10.0.0.0 255.255.255.0

inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.255.255.0 172.16.10.0 255.255.255.240

inside_nat0_outbound list of allowed ip extended access any 172.16.10.0 255.255.255.240

guest_wireless_in list extended access permitted tcp a whole

guest_wireless_in of access allowed any ip an extended list

NO_NAT to access ip 10.0.0.0 scope list allow 255.255.255.0 10.10.0.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 Guest_Wireless

mask 172.16.10.1 - 172.16.10.14 255.255.255.240 IP local pool ServProDHCPVPN

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 625.bin

don't allow no asdm history

ARP timeout 14400

NAT-control

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

NAT (Guest_Wireless) 1 0.0.0.0 0.0.0.0

static (inside, outside) *. *. *. * 10.0.0.11 netmask 255.255.255.255

Access-group outside_access_in in interface outside

Access-group guest_wireless_in in the Guest_Wireless interface

Route outside 0.0.0.0 0.0.0.0 *. *. *. * 2 track 2

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

AAA-server Exch-Srv Protocol nt

AAA-server Exch-Srv (inside) host 10.0.0.11

Timeout 5

auth-NT-PDC SRV EXCH

the ssh LOCAL console AAA authentication

AAA authentication LOCAL telnet console

AAA authentication http LOCAL console

LOCAL AAA authentication serial console

Enable http server

http server idle-timeout 10

http 10.0.0.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 outdoors

redirect http outside 80

redirect http inside 80

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

monitor SLA 124

type echo protocol ipIcmpEcho 4.2.2.2 outside interface

NUM-package of 3

frequency 10

Annex monitor SLA 124 life never start-time now

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

Crypto ca trustpoint ASDM_TrustPoint0

registration auto

name of the object CN = cisco.spprovo.com

ServPro key pair

Configure CRL

string encryption ca ASDM_TrustPoint0 certificates

certificate f642be4b

308202fc 308201e4 a0030201 020204f6 42be4b30 0d06092a 864886f7 0d 010105

311a 3018 05003040 06035504 03131163 6973636f 2e737070 726f766f 2e636f6d

31223020 06092 has 86 01090216 13636973 636f2e73 726f2e6c 65727670 4886f70d

6f63616c 31303034 30383230 35363232 30303430 35323035 5a170d32 301e170d

3632325a 3040311a 30180603 55040313 and 11636973 636f2e73 7070726f 766f2e63

6f6d3122 30200609 2a 864886 f70d0109 02161363 6973636f 2e736572 7670726f

2e6c6f63 616c 3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d

010a 0282 010100 has 5 b4646cde f981f048 efa54c8a 4ba4f51c 25471e01 459ea905

313ef490 72b4d853 4e95ab7d a8c1350e 5728dca6 a98c439e 2c12d219 06ee7209

9f2584d1 b2abf71c 31c0890f 3098533b 6bc3ad4b 3bcd8986 e70ca78e 07a749d6

ee4e0892 4fcb79b6 724f7012 9f42fc2f b80c17ed adb5d36b 67590061 453d9ae6

16583d 36 5a22b7c2 737fd705 94656f3f 578fb67f 79bd2a59 17522be3 d2386e22

2c62352f cda317b0 be805a04 76f19989 34031cbd a5fc62a7 1d9f52f3 00cf60b6

bbbdc4f0 fb651b82 b3e22a0a 718ff0b4 e213f4ac cdeb413b 9c4a47c3 9134d7a9

e8dcf2c5 c1cd4075 61d75e3a 475a17f1 2f955741 9ed2a8d6 c381eba3 247134e1

b5c33fac 7ae03d02 03010001 300 d 0609 2a 864886 05050003 82010100 f70d0101

156 5fde62c5 b4cbb0f4 0c61fab7 fae04399 27457ab7 9790c 3fac914d 70595db9

e69d3f19 3476dc51 32c885de b5904030 05624fe0 e8983e0a ab5527f3 8c5dd64a

1e1a6082 b6091657 8704c 539 a3c6be47 da2a871f 4fafe668 70db2c2b 573d47b2

7f3df02f c9d53a92 bcf5f518 9953e14c f957a6ca 279f9e9f ddbd2561 6e0503c2

ba59a165 055d697f dd028d00 5cc288c4 83ced827 9c82ef3e 7e67f2d2 6de573e3

42a0b6bf ef8d06ed cb9805f2 c38011d3 5263bc3f 5b68df7a bef36c40 8c5e33f3

26b02c27 63a9848c 8461738f cd19ae95 f059ee34 afe4bdbc 8d8d2335 751b 0621

65464b2c 4649779d 3ba01b69 8977 has 790 73815f8b 3c483f93 a5ca9685 04b6e18a

quit smoking

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

No encryption isakmp nat-traversal

!

Track 2 rtr 124 accessibility

Telnet 10.0.0.0 255.255.255.0 inside

Telnet timeout 10

SSH 10.0.0.0 255.255.255.0 inside

SSH 0.0.0.0 0.0.0.0 outdoors

SSH timeout 10

SSH version 2

Console timeout 10

VPDN group ServPro request dialout pppoe

VPDN group ServPro localname *

VPDN group ServPro ppp authentication pap

password username * VPDN * local store

dhcpd outside auto_config

!

dhcpd address 10.10.0.100 - 10.10.0.227 Guest_Wireless

dhcpd dns 8.8.8.8 4.2.2.2 interface Guest_Wireless

enable Guest_Wireless dhcpd

!

a basic threat threat detection

threat detection statistics

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

NTP server 38.117.195.101 source outdoors

NTP server 72.18.205.157 prefer external source

SSL-trust outside ASDM_TrustPoint0 point

WebVPN

allow outside

SVC disk0:/anyconnect-win-2.3.0254-k9.pkg 1 image

enable SVC

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

Servpro internal group policy

Group Policy attributes Servpro

Server DNS 10.0.0.11 value

Protocol-tunnel-VPN IPSec svc webvpn

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list Servpro_splitTunnelAcl

SERVPRO.local value by default-field

servpro encrypted NtdaWcySmet6H6T0 privilege 15 password username

servpro username attributes

type of service admin

username, encrypted bHGJDrPmHaAZY/78 Integratechs password

tunnel-group Servpro type remote access

attributes global-tunnel-group Servpro

address pool ServProDHCPVPN

authentication-server-group LOCAL Exch-Srv

strategy-group-by default Servpro

tunnel-group Servpro webvpn-attributes

enable ServPro group-alias

IPSec-attributes tunnel-group Servpro

pre-shared key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:52bca254012b1b05cca7dfaa30d1c42a

: end

Most likely you are behind a router PAT when you are connected to the VPN, so please allow the following:

Crypto isakmp nat-traversal 30

Cisco's VPN IPSec help please

Hi all

I have 3 sites, the main site has a cisco firewall mikrotik router.

There is a vpn ipsec existing between the cisco router and another router cisco on the site of the 2nd and it works well.

Now, I've added an another vpn between a 3rd site and main site. The router on the 3rd site is a mikrotik firewall.

I had the vpn on the main site and the 3rd site where the mikrotik firewall is and it worked well.

then for some reason, the vpn with the 3rd site has failed and I could not get it working again.

When looking for answers, I see that the vpn for the 3rd site States the following:

#pkts program: 46, #pkts encrypt: 46, #pkts digest: 46
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

It seems that no traffic is coming back to the cisco

I also found the following output below to diagnose the problem.

It seems that there is communication, but if I read this right, it looks like the cisco established a new number but the other end is not the new number

new node-1868419487

node-1868419487 error suppression FALSE "Information (in) condition 1" pattern

Any help would be appreciated.

* 02:49:51.911 Jul 22: ISAKMP: (2060): purge the node-1140469772

* 02:49:59.723 Jul 22: ISAKMP: DPD received message KMI.

* 02:49:59.723 Jul 22: ISAKMP: node set 1053074288 to QM_IDLE

* 02:49:59.723 Jul 22: ISAKMP: (2060): Protocol for sending INFORMER DPD/R_U_THERE 1

SPI 2273844328, message ID = 1053074288

* 02:49:59.723 Jul 22: ISAKMP: (2060): seq. no 0x645EC368

* 02:49:59.723 Jul 22: ISAKMP: (2060): my_port of x.x.x.127 package sending 5

peer_port 00 500 (R) QM_IDLE

* 02:49:59.723 Jul 22: ISAKMP: (2060): sending a packet IPv4 IKE.

* 02:49:59.723 Jul 22: ISAKMP: (2060): purge the node 1053074288

* 02:49:59.767 Jul 22: ISAKMP (2060): packet received dport x.x.x.127

500 sport Global 500 (R) QM_IDLE

* 02:49:59.767 Jul 22: ISAKMP: node set-1868419487 to QM_IDLE

* 02:49:59.771 Jul 22: ISAKMP: (2060): HASH payload processing. Message ID = 24265

47809

* 02:49:59.771 Jul 22: ISAKMP: (2060): treatment of the NOTIFY DPD/R_U_THERE_ACK protoco

l 1

0, message ID SPI = 2426547809, a = 0x8705F854

* 02:49:59.771 Jul 22: ISAKMP: (2060): DPO/R_U_THERE_ACK received from the peer 125,23

6.211.127, sequence 0x645EC368

* 02:49:59.771 Jul 22: ISAKMP: (2060): node-1868419487 FALSE reason for deletion error

"Information (in) condition 1"

* 02:49:59.771 Jul 22: ISAKMP: (2060): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY

* 02:49:59.771 Jul 22: ISAKMP: (2060): former State = new State IKE_P1_COMPLETE = IKE

_P1_COMPLETE

* 02:50:01.111 Jul 22: ISAKMP: (2060): purge the node-1201068805

Comparing encrypt of 46 to 47436 counters, it seems that router is ecncrypting the traffic, but we do not get any interesting traffic on the remote side.

Most likely, you might want to check on the remote site, if you see counters increment in parallel decryption and encryption of the counters are incrementing or not.

On the router IOS, if are incrementing counters encrypt, and confirm that you have not any tunnel existing before the router can be seen same proxy IDs, which is already negotiated with other peer.

Finally, please make sure that the ESP, 50 protocol traffic is not blocked in transit.
I hope this helps.

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

Cannot access the internal network with Cisco easy vpn client RV320

I have a cisco RV320 (firmware v1.1.1.06) and created a tunnel easy vpn (= split tunnel tunnel mode), then I installed the cisco client vpn v5.0.07.0290 in Windows 7 64 bit, I can connect to the vpn, but I do not see the other pc ping nor them, no idea?

Thank you

Hello

1. is the firewall on the active Windows 7 computer? If so, please disable it

2. can you check that you get a correct IP address in the range of the POOL of IP configured?

3. When you perform the tracert command to access an internal server, it crosses the VPN¨?

4. is the tunnel of split giving you access to internal IP subnets defined?

5. on the RV320 you see the user connected and sending and receiving bytes?

Don t forget to rate and score as correct the helpful post!

David Castro,

Kind regards

Redundancy with double tis on cisco ASA VPN Site to Site

Dear supporters,

Could you help me to provide a configuration for the network as an attachment diagram.

I am suitable with your help.

Thank you

Best regards

Hi Sothengse,

You can visit the below link and configure ASA @ head and Canes accordingly to your condition.

You must change the configuration of the similar example with ends... Double TIS @ ends in your scenario...

http://networkology.NET/2013/03/08/site-to-site-VPN-with-dual-ISP-for-BA...

I hope this helps.

Concerning

Knockaert

License of Cisco 2821 VPN IpSEC

Hello

I have a small problem, a do give me a Cisco 2821 for installing a VPN client to a small local network.

I don't have problem to the router connection, but when I try to set up an ipsec i cant.

We have need of a license or a module installation IpSe VPN?

When I run this command, the router does not include:

vpnbog1 (config) #crypto isakmp policy 1

^

Invalid entry % detected at ' ^' marker.

vpnbog1 (config) #.

the show version is:

January 3, 21:12:49.219: % SYS-5-CONFIG_I: configured from console by admin on consoleversion

Software (fc2) SOFTWARE VERSION, Cisco IOS, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4 (3i)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Updated Thursday 28 November 07 21:09 by stshen

ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

vpnbog1 uptime is 1 hour, 32 minutes

System to regain the power ROM

System restarted at 14:40:43 PCTime Friday January 3, 2014

System image file is "flash: c2800nm-spservicesk9 - mz.124 - 3i.bin".

This product contains cryptographic features and is under the United States

States and local laws governing the import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

Cisco 2821 (revision 53.51) with 251904 K/K 10240 bytes of memory.

Card processor ID FTX1213A06Y

2 gigabit Ethernet interfaces

2 FXS voice interfaces

Configuration of DRAM is wide with parity 64-bit capable.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (read/write)

You are tuning a "spservices" image that has no crypto code compiled (AFAIR, feel free to doublecheck).

You would need advanced security or advanced IP services have together.

http://www.Cisco.com/en/us/prod/collateral/routers/ps5853/images/0900aecd80524a07_null_null_null_07_19_05-1.jpg

M.

Connectivity VPN IPSec Client to ASA5510

I have an ASA5510 at a remote site. I used the IPSec VPN Wizard to configure remote access for developers in the portion of the DMZ network 192.168.100.0/24.

I can connect using two the last customer Cisco Windows and using VPNC on my Linux machine. A tunnel is created, I get a valid IP within the 192.168.100.0 subnet and everything is great.

But when I try to ssh to one of the servers, the SYN package times out. I can see the connection tries to establish by looking at the logs on the firewall.

There is no problem with Linux servers themselves to who I am trying to connect. I've ridden iptables and even tried to connect without any firewall rule. Still no dice.

I can post my running-config here if necessary.

Thank you.

Well just ensure that ISAKMP desired on your firewall policy is at the top. This will reduce the time for negotiation for Phase 1. Also, make sure that there is no fragmentation (MTU issues).

Concerning

Farrukh

ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

This is the phone that we seek;

http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

I want to know is the Anyconnect Essentials license will work with these IP phones?

When I do a version of the show,

The devices allowed for this platform:

The maximum physical Interfaces: unlimited

VLAN maximum: 50

Internal hosts: unlimited

Failover: disabled

VPN - A: enabled

VPN-3DES-AES: enabled

Security contexts: 0

GTP/GPRS: disabled

SSL VPN peers: 2

The VPN peers total: 250

Sharing license: disabled

AnyConnect for Mobile: disabled

AnyConnect for Linksys phone: disabled

AnyConnect Essentials: disabled

Assessment of Advanced endpoint: disabled

Proxy sessions for the UC phone: 2

Total number of Sessions of Proxy UC: 2

Botnet traffic filter: disabled

This platform includes a basic license.

It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

Hi Leo,

you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

HTH

Herbert

authentication with Cisco anyconnect

Hello world

With client anyconnect, how is managed authentication via the web portal? It is dependent on the Explorer (= logoff window) or IP address?

Authentication can invoke an external server (AD or LDAP) to be able to add users or groups?

concerning

Hello

For anyconnect, you will define a tunnel-group. You can set the authentication server in the tunnel group. By default, the authentictaion is made with the local database.
```
tunnel-group hillvalleyvpn general-attributes     

         authentication-server-group < authentication server name>


    Hope this helps.

    
Regards,

    Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.
```

Double authentication with Oracle EBS at the APEX problem

Hello

I am currently working on a project to integrate with Oracle EBS 12.1.3 4.2.4 APEX. We have completed the recommended white paper Oracle configuration. I joined at the request of the APEX of a responsibility of BSE, when I click on the page of the APEX of the EBS, it navigates me to the login page of the APEX, and after I entered my credentials is to show the "No data found" error on the page. Then when I click the OK button again once he navigates me to the login page of the APEX and is validate my login information, allowing me to enter the APEX successfullly.

It's really us boring for double login controls. Appreciate your help with this problem as soon as possible.

Deployment environment

===============

Database: Oracle 11g (11.2.0.2)

Version APEX: APEX 4.2.4

Oracle EBS Version: R12.1.3

Application servers: Apache TomCat 7.0.56 (for APEX), Oracle HTTP Server (EBS)

Web listening port: Oracle REST Data Services (2.0.6)

Authentication: Custom authentication (login page validates users EBS)

Thank you

Sudhakar

It seems that the constructed URL is not allowed. We EBS do not build a valid string. You can see where he puts "CallFromForm" and then adds "& p =...". "URL.

The white paper mentions a required patch, you need else to resolve this problem.

Use the gateway FND. If you do not need to pass parameters through your form to Apex, Oracle now provides a GWY.jsp which allows you to launch the Apex. Install the patches of R12 12316083 and 12726556. Then use the GWY.jsp based on your shape as described in the white paper "Extending Oracle E-Business Suite Release 12 using Oracle Application Express".

Patch 12316083 is mentioned in the white paper, you are missing the 12726556.

Description

This bug solves the problem of pitcher APEX, at the launch of a whole page of APEX

Oracle E - Business Suite forms according to the user interface. An additional url

parameter 'CallFromForm' used to be added to the URL of the APEX, which was originally

APEX page to fail.

Misconfigured remote VPN server by using IPSEC client

I'm trying to figure out what I did wrong in my setup. The environment is:

ASA 5505 running 8.2 with 6.2 ASDM.

Version of the VPN Client 5.0.05.0290

I installed VPN ipsec clients both anyconnect and connected successfully to the remote access VPN server. However, the client doesn't show any returned package. Thinking that I have badly configured, I have reset to the default value of the factory and began again. Now I only have the configured ipsec vpn and I have exactly the same symptoms. I followed the instructions to configure the ipsec vpn in Document 68795 and double-checked my setup and I don't know what I did wrong. Because I can connect to the internet from inside network and I can connect to the VPN from outside of the network (and the ASDM Watch monitor an active connection with nothing sent to the client) I believe this is a road or an access rule preventing communication but I can't quite figure out where (and I tried the static routes to the ISP and a wide variety of access rules before rinsing to start) above).

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vogon strategy
attributes of vogon group policy
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vogon_splitTunnelAcl
username password privilege encrypted 0987654321 zaphod 15
username password encrypted AaBbCcDdEeFf privilege 0 arthur
username arthur attributes
VPN-group-policy vogon
tunnel-group vogon type remote access
tunnel-group vogon General attributes
address pool VPN_Pool
strategy-group-by default vogon
tunnel-group vogon ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:xxxxxxxxxxxxxxxxxxxxxx

Looks like a typo for the Pool of IP subnet mask.

You currently have:

mask 10.92.66.10 - 10.92.66.24 255.255.0.0 IP local pool VPN_Pool

It should be:

mask 10.92.66.10 - 10.92.66.24 255.255.255.0 IP local pool VPN_Pool

Please kindly change the foregoing and test, if it still does not work, please please add the following:

management-access inside

Policy-map global_policy
class inspection_default

inspect the icmp

Then try to VPN in and see if you can ping 10.92.65.1 and let us know if this ping works.

Please also share the output of: "cry ipsec to show his" after the trial, if it does not work.

Press L2L VPN, IPSEC, and L2TP PIX connections

Hi all

I'm trying to implement a solution on my FW PIX (pix804 - 24.bin) to be able to support a VPN L2L session with VPN dynamic user sessions where clients will use a mix of IPSEC(Nat detection) and L2TP. We have always supported things IPSEC and that worked great for many years. I'm now trying to Add L2TP support, so that I can support Android phones/ipads, etc. as well as Windows with built in VPN l2tp clients clients. Everything works well except for the new features of L2TP. Allows you to complete one phase but then tries to use the card encryption that is used for the VPN L2L. It seems to fail because IP addresses are not in the configured ACL to the crypto-map L2L. Does anyone know if there are any questions all these configurations support both. And if not can you see what I have wrong here, which would make it not work. Here are the relevant training:

C515 - A # sh run crypto
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set of society-ras-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac company-l2tp
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map company-ras 1 correspondence address company-dynamic
company Dynamics-card crypto-ras 1 set pfs
Dynamic crypto map company-ras 1 transform-set ESP-SHA-3DES ESP-3DES-MD5 company-ras
Dynamic crypto map company-ras 1 lifetime of security association set seconds 28800
company Dynamics-card crypto-ras 1 kilobytes of life together - the association of safety 4608000
crypto dynamic-map-ras company 2 address company-dynamic game
crypto dynamic-map company-ras 2 transform-set of society-l2tp
crypto dynamic-map company-ras 2 set security association lifetime seconds 28800
company Dynamics-card crypto-ras 2 kilobytes of life together - the association of safety 4608000
card crypto company-map 1 correspondence address company-colo
card crypto company-card 1 set pfs
card crypto company-card 1 set counterpart colo-pix-ext
card crypto card company 1 value transform-set ESP-3DES-MD5 SHA-ESP-3DES
company-map 1 lifetime of security association set seconds 28800 crypto
card company-card 1 set security-association life crypto kilobytes 4608000
company-card 1 set nat-t-disable crypto card
company-card 2 card crypto ipsec-isakmp dynamic company-ras
business-card interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside

Crypto isakmp nat-traversal 3600

crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 2
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
C515 - A # sh run tunnel-group
attributes global-tunnel-group DefaultRAGroup
company-ras address pool
Group-LOCAL radius authentication server
Group Policy - by default-l2tp
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
PAP Authentication
No chap authentication
ms-chap-v2 authentication
eap-proxy authentication
type tunnel-group company-ras remote access
tunnel-group global company-ras-attributes
company-ras address pool
Group-LOCAL radius authentication server
tunnel-group company-ras ipsec-attributes
pre-shared-key *.
type tunnel-group company-admin remote access
attributes global-tunnel-group company-admin
company-admin address pool
Group-LOCAL radius authentication server
company strategy-group-by default-admin
IPSec-attributes of tunnel-group company-admin
pre-shared-key *.
PPP-attributes of tunnel-group company-admin
No chap authentication
ms-chap-v2 authentication
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared-key *.
ISAKMP keepalive retry threshold 15 10
C515 - A # sh run Group Policy
attributes of Group Policy DfltGrpPolicy
Server DNS 10.10.10.20 value 10.10.10.21
Protocol-tunnel-VPN IPSec
enable PFS
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value company-SPLIT-TUNNEL-ACL
company.int value by default-field
NAC-parameters DfltGrpPolicy-NAC-framework-create value
internal strategy of company-admin group
attributes of the strategy of company-admin group
WINS server no
DHCP-network-scope no
VPN-access-hour no
VPN - 20 simultaneous connections
VPN-idle-timeout 30
VPN-session-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the IP-comp
Re-xauth disable
Group-lock no
enable PFS
Split-tunnel-network-list value company-ADMIN-SPLIT-TUNNEL-ACL
L2TP strategy of Group internal
Group l2tp policy attributes
Server DNS 10.10.10.20 value 10.10.10.21
Protocol-tunnel-VPN l2tp ipsec
disable the PFS
Split-tunnel-policy tunnelall
company.int value by default-field
NAC-parameters DfltGrpPolicy-NAC-framework-create value

Relevant debug output

C515 - Has # Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, Oakley proposal is acceptable
Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Sep 03 02:09:33 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE SA proposal # 1, turn # 1 entry IKE acceptable Matches # 3 overall
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, status of automatic NAT detection: remote endpoint IS behind a NAT device this end is NOT behind a NAT device
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, previously allocated memory of liberation for permission-dn-attributes
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, PHASE 1 COMPLETED
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, for this connection Keep-alive type: None
Sep 03 02:09:33 [IKEv1]: IP = 66.25.14.195, Keep-alives configured on, but the peer does not support persistent (type = None)
Sep 03 02:09:33 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, timer to generate a new key to start P1: 21600 seconds.
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, detected L2TP/IPSec session.
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, QM IsRekeyed its not found old addr
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =...
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa181b866).
Sep 03 02:09:33 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, case of mistaken IKE responder QM WSF (struct & 0x501c1f0) , : QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH
Sep 03 02:09:33 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, peer table correlator Removing failed, no match!
Sep 03 02:09:33 [IKEv1]: ignoring msg SA brand with Iddm 204910592 dead because ITS removal
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, Oakley proposal is acceptable
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Sep 03 02:10:05 [IKEv1 DEBUG]: IP = 66.25.14.195, IKE SA proposal # 1, turn # 1 entry IKE acceptable Matches # 3 overall
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, status of automatic NAT detection: remote endpoint IS behind a NAT device this end is NOT behind a NAT device
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, connection landed on tunnel_group DefaultRAGroup
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, previously allocated memory of liberation for permission-dn-attributes
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, PHASE 1 COMPLETED
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, for this connection Keep-alive type: None
Sep 03 02:10:05 [IKEv1]: IP = 66.25.14.195, Keep-alives configured on, but the peer does not support persistent (type = None)
Sep 03 02:10:05 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, timer to generate a new key to start P1: 21600 seconds.
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, detected L2TP/IPSec session.
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, QM IsRekeyed its not found old addr
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =...
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa5db9562).
Sep 03 02:10:05 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 66.25.14.195, case of mistaken IKE responder QM WSF (struct & 0x501c1f0) , : QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_NEGO_SA--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, peer table correlator Removing failed, no match!
Sep 03 02:10:05 [IKEv1]: ignoring msg SA brand with Iddm 204914688 dead because ITS removal

The outputs of two debugging who worry are the following:

Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID remote Proxy Host: address 172.16.0.104 17 of the Protocol, Port 0
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, data received in payload ID local Proxy Host: address x.x.x.x, 17 of the Protocol, Port 1701

Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto, check card company card, seq = 1 =...
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, static check card Crypto card = company-map, seq = 1, ACL does not proxy IDs src:66.25.14.195 dst: x.x.x.x
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, tunnel IPSec rejecting: no entry for crypto for proxy card proxy remote 66.25.14.195/255.255.255.255/17/0 local x.x.x.x/255.255.255.255/17/1701 on the outside interface
Sep 03 02:10:05 [IKEv1]: Group = DefaultRAGroup, IP = 66.25.14.195, error QM WSF (P2 struct & 0x501c1f0, mess id 0xa5db9562).

This seems to indicate that his NAT detection but then do not assign to the entry card cryptography because networks are encrypted are not in the configured ACL that is true. He needs to use dynamic input and it doesn't seem to be.

I need to create another dynamic map entry to make it work instead of add lines to the same dynamic with a lower (higher) priority map entry?

Thanks in advance for any help here.

Hello

That won't do the trick, l2tp clients are picky kindda, so you know if they do not hit the correct strategy first they just stop trying. Follow these steps:

correspondence from the company of dynamic-map crypto-ras 1 address company-dynamic

No crypto-card set pfs dynamic company-ras 1

No crypto dynamic-map company-ras-1 transform-set ESP-SHA-3DES ESP-3DES-MD5 company-ras

Dynamic crypto map company-ras 1 transform-set company-l2tp SHA-ESP-3DES ESP-3DES-MD5 company-ras

The foregoing will not affect existing customers of IPsec at all, these clients will not use the statement of pfs and will link even if the correspondence address is not configured (it is optional), besides Cisco IPsec clients will be affected first the mode of transport policy and fail however they will continue to try and hit another police PH2.

Regarding your last question, I was referring specifically to the support of l2tp for android, and Yes, you will need to run one of these versions.

http://www.Cisco.com/en/us/docs/security/ASA/asa82/release/notes/asarn82.html#wp431562

Tavo-

Routing VPN Ipsec

Morning,

I have an ASA 5520 of Cisco running 8.4 (5). When to use a VPN ipsec client and it connects to the local network, how the connection interprets her return flights. Currently, I have all my servers pointing to the front door on our old firewall. I have a different gateway on the new Cisco firewall. It is a transitional phase we are permanently than one Cisco ASA 5520 firewall. For testing purposes, we want to test the configuration of the VPN client with our front Radius Server cut us above. Test users must connect to resources on the corporate network. Should I put a route on the old firewall so when packets hit VPN servers they will know how to return to the VPN tunnel or the source and destination address will already be taken into account when the tunnel VPN hits the server, packages will return to the tunnel. The Cisco VPN client does not NAT configuration. Once we feel that the test is passed, we will change the gateway from the Cisco ASA 5520 to match the existing bridge for all resources on the network.

Information or advice would be greatly appreciated?

Thank you

Carlos

On the SAA, you set up a pool of IP addresses for the client. This pool should be aligned on the subnet boundaries. On your infrastructure (L3 switch or your old firewall), you tricky staric asa for this pool-network. Thereby the packages of answer-VPN-will flow to the ASA.

Sent by Cisco Support technique iPad App

Double authentication using LDAP and RSA

I would use LDAP and RSA (double authentication) for my SSL VPN clients. Can I authenticated users if my logon page requires users to enter a second username. If I have the configuration so that they have to enter their username once, no authentication attempt is passed on to the authentication servers. I'm under debug on LDAP and RADIUS (for RSA), which is what I know that authentication is never over if they are to enter their user name once on the login page.

If I don't specify "use-primary-username" at the end of the 'secondary-authentication-server-group' command, users must enter their username twice and the authentication is successful.

Does anyone know how to configure the ASA so that they have to enter their username once while using the LDAP (as principal) and RSA (RADIUS) (secondary)?

Thanks in advance.

Matt

Hi Matt,

I just tried on 8.3 (2) and it works as expected. I suspect that you are running in this bug:

CSCte66568 Double authentication broken in 8.2.2 during use-primary-username is CONF.

If you are running 8.2, upgrade to 8.2 (3) and you shoud be fine.

HTH

Herbert

double authentication with Cisco's VPN IPSEC client

Similar Questions

Maybe you are looking for