Authorization number SF302-08MPP AAA
Hello
I'm having a problem with RAY is working on a 302-08MPP SF. RADIUS server works well with the other switch, IE cat2960. I get the following error message when I try to connect using the AD credentials, that work on my other switches.
Invalid user or password on the screen and in the newspapers of switch RAM entry journal below.
WARNING % AAA-W-REJECT: New connection https, destination
I don't see any errors on the server Computer (Server Windows 2008 R2 ent) Under Security-online RAY, I used most of the default setting and match on the NPS (RADIUS) server. The active access profile is one that I created for HTTPS and my PC is the authorized device. Is that all that I'm missing? Any thoughts? Thank you John Hello Depending on the configuration of the guide http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/... ' For the server RADIUS grant access to the web-based configuration utility the. It must be if ensure with "access-accept" the server returns to allow users access to GUI. Here are a few links that might help: https://supportforums.Cisco.com/discussion/10687961/Windows-2008-NPS-rad... http://technologyordie.com/Windows-NPS-RADIUS-authentication-of-Cisco-PR... Kind regards Kush Tags: Cisco Security State authorization of catalyst C6509 aaa post = error Worm of GBA: 5.2 L3 Switch: C6509 IOS version: s72033-ipservices_wan - mz.122 - 33.SXI7.bin All C6509 has the following aaa config: cisco-admin privilege 15 secret 5 username #$% ^ & * gfnEhts$ 5678 #. AAA authentication login default group Ganymede + local the AAA authentication enable default group Ganymede + activate AAA authorization config-commands AAA authorization exec default group Ganymede + local authenticated by FIS 15 AAA authorization commands default group Ganymede + local authenticated by FIS AAA accounting exec default start-stop Ganymede group. orders accounting AAA 1 by default start-stop Ganymede group. orders accounting AAA 15 by default start-stop Ganymede group. RADIUS-server host xx.xx.xxx.12 RADIUS-server timeout 15 RADIUS-server application made RADIUS-server key bonnefin DSW4 remote session, note the prompt: User name (local user name request) DSW3 remote session, note the prompt: user name (right off the bat, I know that's asking on behalf of Ganymede) DSW2 remote session, note the prompt: user name (right off the bat, I know that's asking on behalf of Ganymede) I can ping my ACS server or DSW. AAA authorization results of debugging: DSW4 16:47:32.660 March 5: AAA/AUTHOR (915254943): permission post = ERROR 16:47:32.660 March 5: tty1 AAA/AUTHOR/CMD (915254943): method = LOCAL 16:47:32.660 March 5: AAA/AUTHOR (915254943): position of authorization = PASS_ADD DSW3 and DSW2 5 March 08:44:26.475 of the Pacific: AAA/BIND (000003E3): link i / f 5 March 08:44:26.475 of the Pacific: AAA/AUTHENTIC/LOGIN (000003E3): choose method list "by default". 5 March 08:44:32.411 of the Pacific: AAA/AUTHOR (0x3E3): choose method list "by default". 5 March 08:44:32.415 of the Pacific: AAA/AUTHOR/EXEC (000003E3): treatment AV cmd = 5 March 08:44:32.415 of the Pacific: AAA/AUTHOR/EXEC (000003E3): treatment AV priv-lvl = 15 5 March 08:44:32.415 of the Pacific: AAA/AUTHOR/EXEC (000003E3): successful authorization Hundreds of other ASW I manage have the same configuration and authentication problems through Ganymede. I was digging through community support forum to see if everything matches my problem, no luck. Any input is highly appreciated. Thank you. You wrote that you already checked the keys in your post in another thread, however, debugs always complain of bad keys. Could check you it again. During configuration of key, do not copy and paste. 15:19:17.629 18 Apr: TAC +: Invalid AUTHOR/START packet (check keys) In addition, I see not a mistake of the ACS. Please add that also if you problem. Kind regards Jatin kone -Does the rate of useful messages- Order of authorization number. Hello. I use the authorization of Cisco Secure ACS 4.1 commands. This morning I put the MOTD and entered fail because my banner starts with a space. The set of shell commands that I use is "unmatched orders permit." Any idea? Thank you. Andrea What you feel is a known defect: CSCtg38468 cat4k/IOS: exec banner failed with white characters Symptom: % PARSE_RC-4-PRC_NON_COMPLIANCE: The error of the parser above can be seen with the traceback, when you configure a banner containing an empty character at the beginning of the line. Conditions: The problem occurs when the AAA authorization is used in conjunction with GANYMEDE +. Workaround solution: Make sure that there is no space character at the beginning of the line of the message of the banner. Details of the problem: try to configure exec banner with empty character at the beginning of the line failed. This occurs when you configure the banner via telnet/ssh exec! When you configure the exec banner even through the console port, all right. Note the white characters at the beginning of each line. When you remove those, exec banner works very well. Again, it was working until IOS version 12.2 (46) SG. Beginning with 12.2 (50) SG1 and upward, the behavior has changed. ~ BR * Does the rate of useful messages *. Using AAA on a PIX, authentication works very well and the AAA user has all rights on the PIX, but aaa authorization always fails when you go into conf t Hello This happens when we have the authority to order enabled on ASA and try to run any command level 15 on SAA. Please, check the configuration of the ASA and see if you are missing this command: AAA authentication enable LOCAL console on make it sure to ACS this privilege to enable level is level 15 HTH JK Please evaluate the useful messages- Need my authorization number to activate Can anyone help? Cloud programs don't use serial numbers, connect to your Adobe ID, released and install http://www.Adobe.com/products/creativecloud/FAQ.html http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html To start https://helpx.adobe.com/creative-cloud.html the Cloud -Installation, update or uninstall and launching after installation If you do not ask about a cloud subscription, read below Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html - and https://forums.adobe.com/thread/1572504 or Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html ISE 2.0 authorization number (patch 1) I'm running into a bit of a strange problem with ISE 2.0 (patch 1). I have a laptop Win 7 passing authC/authZ, get an IP address, but cannot access internal or external resources. It uses 802. 1 x with EAP - TLS with machine and user of AD certs. With this question, I'll have a MAR, but TAC addresses this issue. I just can't understand how the device can get an IP address, but not access anything on the network. The laptop can do a release/renew the IP address, so it becomes somewhere on the network. DRM for ideas. -Dan Looks like a dhcp snooping/analysis of device issue, the sess auth does not know the ip address of your windows pc and then the ACL is not applied. You can check with 'show ip access-list interface x/x '. Can you do a 'show ip analysis device int x/x' and see if the ip of the device shows as active? Also have you configured the settings recommended in the switch using the configuration of the switch guide universal trustsec? install windows with an authorization number 8 Hello. Right now im running windows 7 but in two days, windows 8 will be released and I plan to buy it. the problem is that whenever I have install a program on my pc, I have to had to got in the file and I need to change the permisssion to this file and change the owner to myself (even though im an administrator...). I don't want to buy the winows 8 and realize that it won't install on my pc, so I just dropped t ask you guys if I get this error during the installation of windows 8 or it will work just somehow... Oh btw the permission, I have to do if the file is installed, the program files 86... If I install the users on it works finn... You don't want ALL the problems in the base operating system during the upgrade to Windows 8. Save your important stuff, personal files, etc. to external media (external hard drive is the best). Then, a "return to factory" install of your current operating system from the recovery partition. Then do the recovery disc for Windows 7 by following the instructions in the new facility. You will need these if you need or want to re - install Windows 7. After having done the above, your computer must be in stable and good condition for the upgrade process... Your computer is equipped with a recovery partition that allows to restore "factory". This is how the recovery partition is accessible to most popular brands... For Dell, press CTRL + F11 directly after switching on the device For HP, press F11 directly after switching on the device For Toshiba, press and hold "0" BEFORE and during the power upward For Acer, press and hold ALT + F10, as soon as you see the logo For Asus, press F9, as soon as you see the Asus logo. Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery" Sony VAIO, restart and until that screen "Advanced Boot Options" appears, press "F8". You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery discs... Authorization number Lightroom, cannot create the required folder I just created Lightroom / photoshop and I can't Lightroom to load when I open it it appears an internal error has occurred, cannot create the demand the folder library/application support/adobe/lightroom/develop presets and also another one after that. Can anyone help with my Lightroom set up the problem? Post edited by: Jitendra Khatwani Hi roxanaw, Greetings! There is a permission problem. Try to give permissions to both libraries (library system & user library) and the Applications folder. For the Applications folder --------------------------------- Open Finder On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information. Inside you will find sharing and permissions - Click on this You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to. Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account. Give read and write at all. Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that. This measure will apply privileges and which can take some time depending on the size of the file. Once this is done, click the lock icon, and then close the get info window. Done with file applications here. For the user's library ----------------------- Open Finder Click OK at the top of the page and select 'go to folder '. Type "~ / Library ' and press go Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information Inside you will find sharing and permissions - Click on this You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to. Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account. Give read and write at all. Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that. This measure will apply privileges and which can take some time depending on the size of the file. Once this is done, click the lock icon, and then close the get info window. Made with the user here library folder. For the library system ---------------------------- Open Finder Click OK at the top of the page and select 'go to folder '. Type "/ Library" and press go Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information Inside you will find sharing and permissions - Click on this You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to. Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account. Give read and write at all. Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that. This measure will apply privileges and which can take some time depending on the size of the file.
Once this is done, click the lock icon, and then close the get info window. Done with the record of the library system here. Please let me know if it works Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode. Concerning Jitendra The authorization number. It is infamous granting by the issue of the role. You need the explicit subsidies. For more information, see I have the following Setup on my way... AAA new-model AAA authentication login default group Ganymede + local authentication connecting line CONSOLE of AAA. AAA authorization config-commands AAA authorization exec default group Ganymede + local AAA authorization commands 1 default group Ganymede + authenticated if AAA authorization commands by default 10 group Ganymede + authenticated if AAA authorization commands 15 default group Ganymede + authenticated if The problem is that when I log into the switch through the console port and enter these commands in, I instantly "Command authorization failed" on all orders get there. It's mind-boggling because there is no possible way that the switch is in talks with my Cisco ACS. I have not yet put in the radius-server key. I have to restart the box every time. What Miss me? Thank you for your time. I use IOS Version 12.2 (25) SEB4. -Andrew Hello Before proceeding with the configuration of Ganymede create a local user. Add the following commands. username cisco password cisco AAA new-model AAA authentication login default group Ganymede + local AAA authorization commands 1 default group Ganymede + authenticated if AAA authorization commands 15 default group Ganymede + authenticated if AAA authorization config-commands RADIUS-server host x.x.x.x GANYMEDE-server key... Please mark me if it helps you AAA Authorization % failed. Even my credentials accepted in the CSA authorization failure, anyone has any idea what it could be? (Unauthorized use is not permitted) username: tparrilha password: % Failed authorization. Debug aaa journals * 2 May 09:48:30.840: AAA/AUTHOR/EXEC (00000026): FAILED authorization * 2 May 09:48:41.612: AAA/BIND (00000027): link i / f * 09:48:41.612 2 may: AAA/AUTHENTIC/LOGIN (00000027): choose method list "by default". * 09:48:45.440 2 may: AAA/AUTHOR (0x27): choose method list 'default' - FAIL * 2 May 09:48:45.456: AAA/AUTHOR/EXEC (00000027): authorization FAILURE AAA new-model ! AAA server Ganymede group + Bainet Server 172.20.244.10 ! AAA-authentication failure message ^ CCCC sorry the password is wrong ^ C Group AAA authentication login default local Bainet Group AAA authentication enable default Bainet allow none AAA authorization config-commands default AAA authorization exec Bainet local group AAA authorization commands 1 default local group of Bainet Group of controls 2 AAA authorization Bainet local default Group of default controls 3 AAA authorization local Bainet Group of 4 AAA authorization local Bainet orders default Group of controls 5 AAA authorization Bainet local default Group of 6 AAA authorization local Bainet orders default Group of controls 7 AAA authorization Bainet local default Group of orders 8 AAA authorization Bainet local default Group of 9 AAA authorization local Bainet orders default Group orders 10 AAA authorization Bainet local default AAA authorization commands default 11 local group Bainet AAA authorization commands 12 default local group of Bainet AAA authorization commands 13 default local group of Bainet AAA authorization commands by default 14 Bainet local group AAA authorization commands by default 15 Bainet local group AAA authorization Bainet configuration default group AAA accounting send stop-record an authentication failure failure to exec AAA accounting action-type market / stop Group of Bainet ! default of 0 AAA accounting orders action-type market / stop Group of Bainet ! by default the control 1 AAA accountant action-type market / stop Group of Bainet ! by default the control 2 AAA accounting action-type market / stop Group of Bainet ! by default the control of 3 Accountants of the AAA action-type market / stop Group of Bainet ! by default the control of 4 Accountants of the AAA action-type market / stop Group of Bainet ! by default of 5 Accountants of the AAA commands action-type market / stop Group of Bainet ! by default of 6 AAA accounting orders action-type market / stop Group of Bainet ! by default of 7 AAA accounting orders action-type market / stop Group of Bainet ! by default of 8 AAA accounting orders action-type market / stop Group of Bainet ! default commands 9 accounting AAA action-type market / stop Group of Bainet ! failure to order 10 AAA accounting action-type market / stop Group of Bainet ! by default of 11 AAA accounting orders action-type market / stop Group of Bainet ! by default of orders 12 Accountants of the AAA action-type market / stop Group of Bainet ! by default the control of 13 AAA accounting action-type market / stop Group of Bainet ! by default of 14 AAA accounting orders action-type market / stop Group of Bainet ! by default of 15 AAA accounting orders action-type market / stop Group of Bainet ! by default, the AAA accounting network action-type market / stop Group of Bainet ! default connection accounting AAA action-type market / stop Group of Bainet ! default value of the AAA accounting system action-type market / stop
Group of Bainet Ganymede IP source interface FastEthernet0/0.1 RADIUS-server host 192.168.110.1 single-connection RADIUS-server application made RADIUS-server key 7 11485807161B4A0E0524282B6972 #show worm RT-NAMIBE-NEBS version #show Cisco IOS software, 2800 Software (C2800NM-ADVENTERPRISEK9_IVS_LI-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2) Technical support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Last update Fri 03-seven.-10 05:39 by prod_rel_team ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1) RT-NAMIBE-NBE uptime is of 12 weeks, 5 days, 23 hours, 56 minutes System to regain the power ROM
System image file is "flash: c2800nm-adventerprisek9_ivs_li - mz.124 - 24.T4.bin". After the debug message * 2 May 09:48:45.440: AAA/AUTHOR (0x27): choose method list 'default' - FAIL* the control will be passed to GANYMEDE. We are not this newspaper, who didn't understand why it failed in the Ganymede authorization. Looking at your configuration, its clear that you expect then question the user only if password enable priv-lvl = 15 is not currently configured on ACS for the user/group. Could also remove you single-connection from the below listed command and try again. RADIUS-server host 192.168.110.1 single-connection In case it does not work, send the full output of debugs depending on if possible. Debug aaa authentication Debug aaa approval Debug RADIUS authentication Debug permission Ganymede Debug events Ganymede Jatin kone -Does the rate of useful messages- Dear all, I'm running into a problem with an old script IOS and EEM like I can't do work around the AAA. So I have a script that needs to log config mode and close an interface if an event occurs. Write the scenario is not a problem. But to make it work! We have Ganymede + and to make it work on the router, I need a user authenticated. Or I have to log in to a router in a way that the Ganymede + is bypassed. The config does not support the feature known EEM 3.1 -
I did the script and the ring road, by putting in place a the indicated below: ! local EEMScript AAA authentication login activate the default AAA authentication no EEMScript AAA authorization exec no AAA authorization commands 0 EEMScript no AAA authorization commands 1 EEMScript no AAA authorization commands 15 EEMScript no ! username secret privilege 15 EEMScript 5 XXXXXXXXXXXXXXXXXXXXXXXXXXX ! line vty 0 2 exec-timeout 1 0 privilege level 15 authorization controls EEMScript 0 authorization controls 1 EEMScript authorization controls EEMScript 15 exec authorization EEMScript authentication of the connection EEMScript length 0 nun entry transportation transport of output no 4 Event manager session username EEMScript cli However, in this case, the problem is that if I connect to this router I either connected to the vty 0 - which means I can't be authenticated by the GANYMEDE as not his vty lines 0-2 set. Which means the router becomes unmanageable... On the other hand the solution works! Because if I'm not connected on the script will use the vty 0 by default, which as you see is 'proper' installation do not use AAA - but I need a little modification. That's the real question: Can I force my EEM script to use a specific vty line? as Vty 20 I will never use? The best solution or ideas would be appreciated! "HW is 1841 - c1841-advipservicesk9 - mz.124 - 17.bin". Once attempts are deferred on the RADIUS server group, how can set you a timer on the method list to be restored in the local user database? A problem I see is that the ACS server crashes and is accessible by intellectual property, however, he don't respond with an accept or reject. Therefore, no one is able to connect to all devices. Thank you! AAA problem when WAN is offline now Hi all I have a problem at the moment by connecting to a router while the Wan is offline. GANYMEDE + works fine when the Wan is in place, but when its down I get invited to a password that I enter and then get authorization failed... Here is the config of AAA AAA of default login authentication group Ganymede + activate AAA authorization config-commands AAA authorization exec default group Ganymede +. AAA accounting exec default start-stop Ganymede group. orders accounting AAA 1 by default start-stop Ganymede group. orders accounting AAA 15 by default start-stop Ganymede group. AAA accounting network default start-stop Ganymede group. Default connection accounting AAA power Ganymede group. AAA accounting system default start-stop Ganymede group. Specifying the premises as a backup for authorization method may work around this problem, but no it does not require that the local user IDs and passwords be configured? Because the authentication connection did not use identifiers the as backup, I wonder about the logic to do it for approval. I had good success by configuring the authorization like this: AAA authorization exec default group Ganymede + authenticated if which will bypass authorization of transformation if GANYMEDE is not available and the user has been authenticated successfully. HTH Rick I have a PIX with the following configuration: GANYMEDE + Protocol Ganymede + AAA-server AAA-server GANYMEDE + (inside) host 192.168.1.1 77777 timeout 5 RADIUS Protocol RADIUS AAA server AAA-RADIUS (inside) host 192.168.1.1 Server 77777 timeout 10 AAA-server local LOCAL Protocol AAA authentication GANYMEDE serial console +. AAA authentication enable console GANYMEDE +. order of AAA for authorization GANYMEDE +. AAA accounting correspond to aaa_acl inside RADIUS Everything works fine when the RADIUS server is available. When he is not available, I can log in with the username "PIX" and "password". The problem is, once I connected, I can't get permission to execute orders. Does anyone know of a command that is similar to the "if-certified" for routers that I can use? There is no method of backup for authorization for the PIX. As you know, if the RADIUS server is down, you can connect with "pix" and the password enable, but it doesn't help a permission. The only thing you can do is wait the GANYMEDE server back to the top. I'm sorry. authorization GANYMEDE +. I can't control aaa authorization using win2k Ganymede +. I have the following commands on my router: AAA new-model AAA server Ganymede group + ciscosecure AAA authorization config-commands AAA authorization exec ciscosecure Ganymede group. AAA authorization network group Ganymede ciscosecure +. If the authentication that's good, I can even time of day login control. only permission issues, I need to define groups for users to belong Thank you Francis Hello Francois,. You must add the following line/lines for authorization on the router- AAA authorization commands default Ganymede group 0 +. AAA authorization commands by default 1 group Ganymede +. AAA authorization commands by default 15 group Ganymede +. Thank you Renault go to pokemon, it shows the location of the user not found but works perfectly. It's annoying because it does not disappear. It's my ipod or the app My Macbook Air has no space left, please suggest My Macbook Air has no space left, please suggest Tecra A2: Cannot use the resolution to 1680 x 1050 on external LCD screen Hi all I need to turn my Tecra A2 to 1680 x 1050 at 60 Hz for my new external VW222U LCD monitor which is connected to my port replicator. I know the card (which is 82852/82855) can run at this resolution, when you use the Intel Embedded drivers it w HP Pavilion p7-1012: factory reset I try to do a factory reset on my HP pavilion p7-1012 I bought by Aaron, when I go to the system recovery I get the message "your computer does not have a recovery partition. So I tried to burn the recovery disk and it says "not found recovery Partit Activation of OEM key in windows 8.1 Hello recently, I have formttad my laptop and reinstalled WINDOWS 8.1 PRO on WINDOWS 8.1 LANGUAGE UNIQUE but It took from the BIOS activation keys. My windows is not activated. What should do? I did the installation with Legacy BIOS without UEFI. Pro
RADIUS server must return "cisco-avpair = shell: priv-lvl = 15.»Similar Questions
Jatin kone
I have 2 users
for example. User1, user2
both users have following permissions
S/N
RESOURCES
CONNECT
I have 1 table table1 in User2 and he has 100 lines.
When I run the user1 delete statement
delete from user2.table1;
It will remove all rows in table1
but
When the same query is used in the procedure User1.Proc1
It gives me
PL/SQL: ORA-00942: table or view does not exist
error.
why it happen?
is there something wrong with my request?
any help appriciated.
Published by: Pankaj M 15 July 2010 14:38
Re: compile errorsMaybe you are looking for