Auto BPM to produce UI problem?

Similar Questions

• Shutdown producer/consumer problem

  Hello world

  I need to control one position with a controller of axes and save travel time of the position between two points. I use a producer/consumer model, but the stop key does not complete the program, the second loop is still running. I thought that hitting the stop button would create an error and end the while loop.

  Do you know where is the problem?

  Thank you for your help

  Your VI works as expected. Get rid of the misused sequence frames.

  The last image the question because the queue is destroyed if the two loops have completed. As the loop of consumer requires the queue to be destroyed to finish, this will never happen.

  Norbert

• Auto new imaging HP T610 problem

  I have a bunch of new T610s from HP that I need the image. I used one to create the environment I want, and I can manually copy this image to the HPDM, then manually deploy that image on a new (self discovered) thin client.

  When I add a "rule" for first Contact Rules:

  Name: Auto Image

  Filter set (all criteria, IP address contains 10.22 which is the first two parts of all our internal IP space, I really want to a filter that would say all/all) if I click on generate a list of devices, it shows all existing devices.

  Trigger: first Contact

  Operating system: HP WES/XPe

  Category: imagery

  : Model 20131118 rule (self created when I took the picture manually)

  Activated: ticks

  When I plug a new HP T610, it is automatically detected by HPDM (DHCP specifies the HPDM) and then proceeds to restart in a cycle, and never made the task of imagery.

  The HPDM log shows:

  Card to the master repository repository

  Special Envoy to the device management gateway

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  Task has been retrieved by the Agent

  etc., until I cancel the job

  Reset the status of the task to cancelled

  Can someone tell what I could be doing wrong, or how I can make this work? Should I manually start a task image, is the "first time" works not properly, I have to narrow the filter to avoid 'already seen' devices somehow?

  Thanks for your suggestions.

  Thanks for your suggestion, I checked that the devices already come with the new version of the agent.

  I found/solved the problem, which I had changed the settings by default in:

  Tools-> Configuration-> task settings-> write filter, WOL and adjournment of the task

  I changed it to "run regardless of the State of the write filter.

  So obviously the thin client was sent to the statement to start the task of imaging, rebooted, then collected the statement again from the beginning etc... creation of the loop.

  Once I changed this back to the ' If write filter on restart to clean the overlay, to execute and to commit and then restart for commitment is taken into account ", everything works perfectly.

  Hope this helps someone else...

  Kind regards

  Adam

• Claim auto BPM Human Workflow tasks

  All,
  
  I have a requirement with a client for auto claim the task. When a user selects a task in their task list (default tasks are assigned to a role), it should be automatic claimed. This is to prevent other users of the task of work at the same time.
  
  Thank you I could inform / train the users to have to press the request first, but I examine the possibility of making an Auto claim to reduce the need for users to do.
  
  Does anyone know if this is supported natively with BPM Suite? I looked around the documentation and don't have seem no ways to do. An alternative would be to use the API BPM however I ideally would need to write a custom logic for this.
  
  Your thoughts and your experiences would be appreciated
  
  Concerning
  Dave

  Hi Dave,.

  The value by default when you create a human task is that it is set to auto claim. To see this, open one of your human tasks-> click on "Transfer"-> click on the pencil icon in the upper right. You should see the 'Enable Auto claim' box already checked by default.

  Take a look at this link to learn more about auto claim: Re: is there a need for special application? Seems to work without doing

  Hope this helps,
  Dan

• Producer/consumer problem: several loops/queues

  Hello

  Please refer to my previous post ... http://forums.ni.com/t5/LabVIEW/What-is-the-best-way-to-switch-between-multiple-image-buffers/td-p/1 > for more on the subject. I was told to try a producer/consumer architecture, so I decided to go and do it.

  After doing much research, I come back to ask for help.  I decided to try to implement three loops. The reason for this is because I thought that the length of each loop synchronization can be controlled independently as it should. A single loop treats all user interactions.  A single loop treats data acquisition.  A single loop about the transformation.  I hope that this would help, but obviously made things much more complex.  I created a queue for each loop.  I didn't get the full project, but it seems that everything has run very well where I stopped.  However, one of my States I did not queue receive queue and I have no idea why or where coming.  There is an error in the variant data that says

  'status'-> TRUE
  'code'->-6
  'source'-> ' error: Invalid Args.

  However there is no error in wiring.  Also when this error is displayed, the random State fell through.

  The other weird thing is the number of items in the queue jumps very quickly when I do almost anything.  I don't know if it's common.

  Before I post pictures or whatever it is, I would have an idea about this error.

  Also, I think I saw this in a previous post about the BAU, but I would like to ask a question.  Attached are two photos.  Queue 1 is the way I put things in place.  Queue 2 is the way I saw things in place.  Can someone tell me if the queue 1 is the wrong approach and why?

  I realized what happened.  The other loop was not handled properly and sent the random State of the main loop.

• Creative cloud produces a problem with missing or damaged files

  We are facing this problem often in all systems. a lot of work waiting because of this problem... Willing to take this question as long as need very urgent to recover.

  No one can tell you anything without the proper system or other technical details info. You did not even provide exact errors or tell us what programs are affected. That said, the question is quite probably simply your configuration - insufficient user privileges, permissions restrictive files, hardware problems, and that sort of thing. It's nothing that adobe could fix it for you.

  Mylenium

• AutoGenerate field in Adobe Acrobat Pro and also form getting automatic flow on auto-add to produce the field to the form

  Hello

  I made PDF form that contains Radiobutton, TextBox, Button, CheckBox and barcodes in Adobe Acrobat Pro and everything works well.

  But according to the new requirement I need to "Autogenerate" some fields such as Radiobutton, text field and CheckBox by clicking on the button "add a field"and clicking on the button of the control should get auto generate this PDF form.

  Additional text that is already added to the PDF form get flow down when the fields if auto generate at the top of the form.

  Thanks in advance.

  You can add fields with a script (or show/hide existing fields), but you can not re-flow static PDF file text, unless it was created in LiveCycle Designer.

• 2.1 EA1 - business change/Auto Complete - variety line paste problems - &:

  These are the problems I've found with the tool so far. I hope this helps to improve.
  
  1. When you use the ctrl-"doing business in a package and you have automatic formatting, it will change the automatic formatting based on the ctrl-" you finish on.
  2 pasting of partial lines in the Editor window will cause lines to be deleted after pasting. CTRL-z will bring back the line. This occurs if you paste a line that ends down to another line and begins on a line that already has text in.
  3. no longer works in the substitution of script variables you MUST use:
  4. in creating a package, limiters, throw an error defined by the user. (such as this q "[what is the problem here?]")
  5 record sql re will launch the Save dialogue after the backup with a free title to the same place that you must cancel on.
  
  I hope that this will go in the correction queue. Great new tool!

  1. I see. For the conversion of specific cases, instead I just use preferences - shortcut keys - convert selection to... mapped to for example CTRL + U.
  4. don't throw any error for me. Please post a complete example and the output you get.
  5 strange, never seen that before, but he hit just too. Also the current connection is lost from the file/worksheet. A person of the newspaper of the team can bugs please?
  6. the color combinations are required on SQL Developer Exchange. Go to the voice there to add weight to the possible future implementation.

  Hope that helps,
  K.

  Published by: - K - 03/11/2009 10:50

• Auto Skillbuilders close modal Page problem

  Apex 4.2

  Theme 21

  I use the plugin Skillbuilders modal page and it seems to work except one thing.

  My master page is a region with an interactive report and a selection list.

  Once I open and save my value in the modal, I am taken back to my master page, the region is

  updated and the success message.

  For some reason any selection list is not refreshed.

  My DA automatic closing has 3 actions

  1. run Javascript

  $('#messages')

  . Hide()

  . Empty()

  . Append (this.) Data. $modalPageCloseObject)

  .slideDown ('slow');

  2 update the region

  3 run Javascript

  setTimeout ("$('#success-message').fadeOut ('slow')", 10000);

  Any help appreciated

  Gus

  I got it working by adding a process my main page

  Begin

  null;

  End;

  I used the value of the modal page as my message & P74_MESSAGE.

  I did this treatment conditional, identical to the branch

  This is not a very nice solution. There must be something better

  Gus

• renewal of the cc account breaks with [MS Word] another not produced adobe problems

  I just rewed my cc account and now Word will not work. What's the story?

  Hello

  Adobe and Microsoft are not related.

  Adobe products have nothing to do with Microsoft word.

  Kind regards

  Sheena

• URL of the BPM attachment is always 127.0.0.1

  Hello

  my name is Dimitri and my problem is this: I have a huge demand for BPM (BPM Suite 11 g Weblogic 10.3.6) with custom forms to ADF. Each shape has attachments tab which has a standard implementation of pre-emergent setting auto-generated form. The problem is that attachments can be opened as from the machine with weblogic server where the application is deployed from the entered URL always points to 127.0.0.1. The URL is just fine and you can open other machines 127.0.0.1 is changed manually in the address bar for the DNS name of the server. But of the same application, it can be opened to other machines where there is no weblogic.

  Other URLs like URL of tabs on the form, the URL for the application - they all have a name DNS correct server and accessible from anywhere.

  The URL of the attachment is still what follows.

  http://127.0.0.1:7001/integration/services/ADFAttachmentHelper?bpmWorklistContext=db14d66c-7bc6-4054-8167-af89127112da%3B%3BJ9Y5pEfNJd5bAA8g8s%2Fyco%2BSfTTXR%2Bge9MbLO0ZZ39fxqZzNGk8001qXFBmCop2JQVvhD0yCSD68DLiLXotjOs0J6n8u%2FmpY1q98EsK076MrNdQCIZF767IKPuD3kRViY73%2FXXEbKU5YS13636eV6rNUapYFqUyrl4OWuKukinlrQ84fv6NfAPxADpnHD9CBanaoR2P9jDk826%2B%2BPixHI7fuIvtfTI5%2BS7dWdBpDvYKHROqjdgRrBJGIvJVwfsjn&bpmWorklistTaskId=b4e4a8f2-286e-42ca-b208-93e721a1a02a&QueryAttachment=QueryAttachment&WFTASK_ATTACHMENT_NAME=Writing.doc&bpmWorklistTaskVersion=1&cid=b4e4a8f2-286e-42ca-b208-93e721a1a02a

  And I need to be

  http://my_server_name:7001/integration/services/ADFAttachmentHelper?bpmWorklistContext=db14d66c-7bc6-4054-8167-af89127112da%3B%3BJ9Y5pEfNJd5bAA8g8s%2Fyco%2BSfTTXR%2Bge9MbLO0ZZ39fxqZzNGk8001qXFBmCop2JQVvhD0yCSD68DLiLXotjOs0J6n8u%2FmpY1q98EsK076MrNdQCIZF767IKPuD3kRViY73%2FXXEbKU5YS13636eV6rNUapYFqUyrl4OWuKukinlrQ84fv6NfAPxADpnHD9CBanaoR2P9jDk826%2B%2BPixHI7fuIvtfTI5%2BS7dWdBpDvYKHROqjdgRrBJGIvJVwfsjn&bpmWorklistTaskId=b4e4a8f2-286e-42ca-b208-93e721a1a02a&QueryAttachment=QueryAttachment&WFTASK_ATTACHMENT_NAME=Writing.doc&bpmWorklistTaskVersion=1&cid=b4e4a8f2-286e-42ca-b208-93e721a1a02a

  I have even set up the integration of the University Complutense of MADRID, but the attachment in the attachments table in the AAU still have the URL 127.0.0.1.

  I guess it's a configuration problem. Does anyone have an idea of how it can be fixed? It is essential.

  Thank you very much

  Finally, I discovered a bad configuration hardcoded: in soa - infra-> SOA infrastructure-> properties common I changed URL of the server to 127.0.0.1 to correct my server DNS name and now the attachments have the right URL.

  Thanks anyway.

• ITunes producer does not accept my iTunes password

  Having finally obtained after the well documented, producer Keychain problem iTunes does not accept my iTunes password. What is the password shared with producer?

  What kind of error message you get?

• Formula node problem

  Community salvation OR

  I am currently working on a VI where I run primarily calculations. I use the structure of noda formula I have some experience with. I insert some quiet easy formulas, but when I run the VI there are something that I don't understand. Here is the crux of the formula:

  

  Here's the problem:

  consider the first iteration and don't spend attention to H1, H3, and H4.

  In the first iteration, my input values are V201 = 0 and pw = 4. Then H2 must be calculated = 0 (this also happens when I run the VI in the execution of climax).

  If H2 = 0 also Q1 should be = 0 (this also happens when I run the VI in the execution of hightlight).

  In the next step produces the problem when I want to calculate VRw2. It should be VRw1 (which is 0, the first iteration) then add with 0.25 times Q1. Because Q1 = 0 this should give VRw2 = 0. Instead, it calculates somehow VRw2 = 25. For some reason any he sees Q1 100 instead of 0. In the next iterations, it always adds + 25 to VRw2.

  Anyone has an explanation of how this can happen and how do I fix?

  I'll add the VI (LV13) as an attachment so you can try some things if you want.

  When in doubt, read the help... Formula node.  There is a special note in there.

  Note  Formula node accepts only the period (.) as the decimal separator. The node does not recognize decimal separators located.

• My iPod syncs to all the auto or manual.

  My Ipod syncs to all the auto or manual.  no problem until now. work and recognise to play, but do not reconise legacy Ipod for synchronization before automatic just when must plug usb pluged in now go into windows mediea player hit the Sync tab and then no reconition of design or option to configure sync comes to a stop help please if you can thank you much for the manual have a pleasant day.

  original title: my Ipod does not sync.

  iPods Don't Synchronize with Windows Media Player. To synchronize your iPod, you must use iTunes.

• Error 0 x during the install auto cad 0000142 2015

  I'm not able to start my autocad after installation. When I run the application, its shows error code 0 x 0000142 and the program does not start. HT also checked autodesk site for this problem and someone recommendation, I have also uninstall Adobe reader 9.0 to avoid this problem, but it's not working. Update my windows and MSE for this problem and re install Auto cad but ever-present problem. When I checked on net some site advised me to install registry cleaner and other software, but I have no confidence on them. So please help to solve this problem.

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files