Auto Custom Color Palette apply to the photo?

Similar Questions

• How can I export to PDF for printing Offset, including colors and grayscale of the photo?

  After reading dozens of forum, I not yet found the answer.

  I made a photo album with full-colur and b & w photos for Offset print. I want to be for the b & w grayscale avoid the hues of colors possible. It seems that InDesign does not support the shades of gray, how images become dark. Even with export without any conversion of color or the destination and/or including profiles of original colors, the images are exported to obscurity as a PDF to grayscale.

  
  

  How can I export to PDF for printing Offset, including colors and grayscale of the photo?

  Yes, Photoshop & ID CMYK working spaces are the same

  This can become difficult because 3 programs manage proofing differently.

  Work spaces don't matter, document profiles that handle the preview. So here's the same image in grayscale, placed in the ID on the top and PS on the bottom. I put my info in Photoshop to display the profile of doc in the lower left corner. I can see the profile of my InDesign CMYK Document in my test format (CMYK work is different and is not used). The two profiles are actually the same coated FOGRA39 (Black Ink FOGRA in the case of the PS).

  But the previews do not match because I disabled, so the preview InDesign is Gamma 2.2 or a "screen" media preview overprinting.

  

  If I turn on overprint preview, I get a match because I'm soft proofing for printing:

  

• Share custom color palette

  Hello

  I was wondering if there is a way to share / export of custom devices through Color Palettes?

  Searched in the color under the library file, but cannot find the file light.CLR in the custom palette, only "Apple.clr", "Crayons.clr" and "System.clr".

  Thanks in advance

  Do not neglect your custom colors recorded since the color picker in your local library/color folder.

  The standard search for lists of color path is:

  • / System/library/color
  • ~/Library/colors

  You could keep a record of color lists stored in iCloud and copy them into the folder ~/Library/Colors on each Mac on the local network, but the color picker is not aware of the location of iCloud. There is no provision to prevent as names to crush each other in this process either.

• How to create a custom color palette?

  Hello, basically brand new on Photoshop, but hoping to do something quickly...

  I would like to create a custom, black and white color palette and 7 specific colors in a way that I can quickly reprocess several images exclusively with this palette.

  I would be very grateful if someone could guide me through what I need to do, step by step, assuming that I don't know anything about the program.

  Thank you!!!

  Select a color that you want in your table of swatch by using the color picker and change your foreground color:

  

  Then click on a new shade to create and name the shade:

  

  Open the preset manager. New swatch appears in the swatch palette. Add as many colors as you want.

  

  Shift or CTRL/cmd click on the swatches you want in your custom table, then click on save set.

  

  From the dropdown in the top right of the swatch group, select replace swatches, and select your personalized sample table. The samples will be replaced with your color chart.

  

• Open with settings is not applied to the photo to open in Photoshop Elememtns 11

  original title: Open with not working do not like exepced

  Hi - I am trying to use the option 'Open with' in order to open a photo in Photoshop elements 11.  However, I have a problem.  The program is open, but it will not automatically open the photo (I can open pictures from the program by going to file - open very well).  In an earlier version of this program, that it worked very well by using 'Open with' to open a picture.  Once I put a picture on my desk and used 'Open with' and it worked great with version 11 of the program.  However, I can't seem to get it to open from this location now or any other location using 'open with '.  I think that the problem may be that the element of the "Open with" list points to the wrong thing then I try to select "Choose default program" and select the correct program through it.  However, once that I click on this file which is supposed to be used to open the photo and click Open, the file does not appear in the open with dialog box.  It is not yet here.  The only thing he is the link wrong despite the fact that I clicked on the link at right.  The strange thing is that it works on the screen of another user on the same computer.  I don't want to migrate all of my stuff for a new user - too much work.  Any ideas?

  Hello

  Welcome to the community of Microsoft and thanks for posting the question.

  I suggest you to report the issue to another Department for assistance:

  http://forums.Adobe.com/community/photoshop_elements

  Hope this information helps. Please respond if you have more queries on Windows in the Microsoft community.

• Custom color palette

  I work with several sites that use very similar colors, that I find myself using over and over again. How can I save a set of colors on a palette and bring it for use at a later date?

  ssailer wrote:

  > I work with several sites that use very similar colors, I think
  > myself using over and over again. How to save a custom set
  > to a palette of colors and bring it for use at a later date?

  Open the Swatches palette menu and select clear shades.

  Click the fill color box in the tools Panel, and then drag the frame
  color picker to a color you want to select for your custom palette.

  Once you click on the color, move the color on the color chart picker
  Panel, where it becomes a Paint Bucket cursor.

  Click in the swatches Panel to add the selected color.

  Repeat until you have built your complete custom palette.

  Reopen the swatches Panel menu, and then choose Save the nuances.

  Name your palette, then save it somewhere on your hard drive.

  --
  Linda Rathgeber [PVII] * Adobe Community Expert-Fireworks *.
  --------------------------------------------------------------
  http://www.Projectseven.com
  Fireworks Newsgroup: news://forums.projectseven.com/fireworks/
  CSS newsgroup: news://forums.projectseven.com/css/
  http://www.Adobe.com/communities/experts/
  --------------------------------------------------------------

• CSS link hover color not applied to the last letter in safari

  I'm only seeing this in safari. Here is my site:

  http://smartpeopletalkfast.co.UK/OO2/

  If I click on the contact page of his highlihgted as it should. However if im not on the contact page and I look over the contact link, and the last bit of 't' is not highlighted. How can I fix?

  IM assuming that because its the last piece italic is outside the div tag and for some reason the color of overview is not shown. Ive tried to apply both a: hover css and li: hover.

  Thank you

  I'm the see in FF 3.6.13 as well as on the PC.

  Validate your page or DW or the W3C. On the one hand, you have the divs inside li tags. Do not split your style... Add the italic style to the main styline for the li tag.

  If fixing coding does not work, try adding that a fill to the right of this container - a couple of pixels should do.

• OfficeJet 7612: Customer size of paper in the Photo Tray feeding

  Hello, I'm at my breaking point, trying to get my printer to print on an envelope of 4.75 "x 6.5". It was working fine until I tried to print another batch the next day, then I continued receives "paper mismatch" errors as well as the printer would try to power on the picture for a reason Board any. I already did the following:

  -J' tried 2 versions customized with overturned dimensions of paper sizes. None worked.

  -Configure the printer to read my custom paper size and also put up on the menu print autoadjust the paper to the dimensions of my new size.

  -Reset my printer, it takes off my network wifi, readded and even reset my documents.

  All other tips would be appreciated, I'm running on a Mac. Thank you!

  Hi bgeyvandova, I suspect this problem may be related to your printer firmware, although there is some other explanation that fits your problem.

  HP offers several measures to help solve the paper mismatch error: LINK

  If you try to update your firmware, you can do it here: LINK

  Please let me know if this, or the guide helps you solve this problem. Thank you!

• Colors are inconsistent between the photo and the printed output. The tones of the printed output are disabled.

  It is a HP Photosmart Plus B210A printer.

  I have almost nine cartridges installed (correctly).

  I did a print quality test and the test page seems to be very good.

  The book that I use is photo of high quality printing paper.

  I use the quality setting of the 'best '.

  Thanks in advance for any advice.

  The problem has been resolved with the link you provided «in regards to material...» ».

  Thank you very much for your help.

  YOU ASKED ME TO SAY IT'S RESOLVED - I CAN'T FIND WHERE DO.

  Can you please answer with where it is?

  Thank you. Jennifer

• I want to save the JPEG color palette to show the clients

  Can I do this?

  If so, how?

  Thank you very much.

  Yes, you can get the theme PNG with a URL, as indicated by Shamit.  You can take a screenshot, or if you use the iOS app, you can share an image of the theme by e-mail.

• Apex 4.0.1 Flash cards custom colors

  I'm in APEX 4.0.1 on 11g. I have a chart where I need to go back to different colors according to the different requirements.
  
  I have a calculation on an item page called P2_CUSTOMCOLORS, which creates a list of colors based on values and that returns the colors in the right order in custom colors.
  
  I put & P2_CUSTOMCOLORS. in the field of color personalized for the chart.
  
  I have pdebugged the value of the element and the colors returned are correct and in the correct order:
  
  #009900, #009900, #990000, #CCCCCC
  
  But when I run the table, all THE columns are the first color (GREEN). If I manually put the colors in custom colors, they all return the color of the first value of the color in the list.
  
  Anyone else seen this?

  Hi Walter,

  Sorry for the delay in answering your last question. I have set up an example of how you can apply thresholds to a graph, here: http://apex.oracle.com/pls/apex/f?p=36648:35. As you've already identified, thresholds with data association must be done within the tag < data >. By default, no threshold is associated with tables, so you would need to customize the tags < data > your horoscope in order to apply them. You can generate a process of PL/SQL page, to display the XML data in the required format, save this output to a page hidden item and then make reference to the page element in your custom XML (by replacing the string #DATA # with a reference to your hidden item). I described the steps that I followed, under the graph of the sample. This is just an example, so you can choose to generate your data in different ways. I hope this will help.

  Kind regards
  Hilary

• Photos are not print with the photo cartridge

  Hello

  I have a Photosmart e 7510 and am trying to print photos.  I have installed HP Premium paper and HP Photo cartridge installed.  When I print the photos that are green - I printed both a progress report and a report of print quality and the cartridge photo is full but the magenta is empty.  It seems to me that the photos are print with regular color cartridges and not the photo cartridge.  Or photos using all the cartridges?  I correctly on all the printer settings and chose to 'better' than the quality of the photo.

  Any help is appreciated...

  The photo cartridge is just black photo, which is used to improve the nuances of black and colors in a photo. When photos are printed colours would be used to create the best possible performance. I could replace the magenta cartridge and printing resumes and see if that solves the Green tinting the problem you are currently experiencing. I hope this helps.

• How to save custom color settings?

  Adobe Photoshop CC 2015 release (June 2016, November 2015 and June 2015)

  How to save custom color settings?

  The savings is only victory. environment!

  

  This is how save you it - but the default path is C > users > (your name) > AppData > Roaming > Adobe > color > settings.

  No matter where you save it, as long as you know where to look when you need to load them. But the default location is as good as no matter what.

• Custom colors

  Is there a way to save and name a set of custom colors (used to highlight, fill, etc.) in Acrobat X Pro?

  There's not a built-in function to save and name a color custom to this end set. But here's how tackle this problem. I use about 15 different colors and they're all different subjects for me. Select the first comment for which you want to save the color. Right click > properties > general tab. Then in the field of the object, the name of your color.

  So what to do for each of the other colors that you want to save. Ensure that all comments containing the colors are on page 1.

  Once you are done with all the colors, select these comments in the notes pane and export all file data. It will record it as one. FDF file.

  Now, whenever you want to use these colors to highlight another document, simply import this FDF file into your current document. You will get a mandatory warning, on the way of reviews came from another document, ARE YOU SURE? ' Yes.

  Because the comments are related to single page and the geometry of single page numbers, they all see the place exactly in the same place as they were in your original document, then it would be a good thing to keep them in the margins of your original document.

  Whenever you want to use these custom colors. Simply click the color comment not > make current properties default.

  Hope that helps.

• It is possible to disable the custom color picker color?

  Hi guys!

  I searched in the discussions on the color picker, but I found something...

  It is possible to disable the option to select a custom color? I work in a company that makes software to Brazilian clients, and not everyone understands English phrases...

  In other words it is the translation of the option, but I don't know if it is possible also.

  Thank you!

  You certainly need to add the stylesheet to the scene, not to anything else. If you take my example and change

  scene.getStylesheets ()...

  TO

  root.getStylesheets ()...

  you will see that it won't work anymore.

  The difference between that and the css that you used, it's that the css you used is applied to the selector button display color; You should apply styles to the popup (color palette), who does not appear in your VBox or AnchorPanes. Notice how the police changed to the name of the color in the button, but it has not changed for the label of 'Personal colour' you are trying to remove.

  Somewhere there is a code that adds the VBox you are subclassing of a scene and this decoration in a stadium. Your best option (maybe second best option, see below) is to find this code, you can add the style sheet to the scene itself.

  If you are working within a framework of someone else wrote and cannot access or modify the code where the scene is set, you have another option I see. Each node has a stage property that refers to the scene which this node belongs. So you can observe the changes made to this property and when it is updated, add the style sheet to the scene.

  So here's a hack to make my original hack works, in case you can not directly access the scene for some reason any:

  final String suppressCustomColorCss = getClass().getResource( "noCustomColorPicker.css").toExternalForm();
  colorPicker.sceneProperty().addListener(new ChangeListener() {
   @Override
    public void changed(ObservableValue observable,
    Scene oldScene, Scene newScene) {
    if (newScene != null) {
    List cssClasses = newScene.getStylesheets();
    if (!cssClasses.contains(suppressCustomColorCss)) {
    cssClasses.add(suppressCustomColorCss);
    }
    }
    }
  });
  

  This code basically says "when the color selector becomes an integral part of a new scene, add the stylesheet to this scene.

  At this point, you're applying notch on top of hack to get the effect you need. I think if I were in this situation I would not go ahead and define my own color chart. What you really need is a menu button, a property for the selected color and a popup with a layout of controls allowing to choose an arbitrary color. It would be a bit of work, but shouldn't be too hard. If you take this option (which I think may be your best bet), it's more work now but it will be clear what you do - when you (or other programmers on your team) eventually return to the code, you will understand how it works much better.

  You must also file two requests for features. An API toggle the option of choosing a custom color, as this seems to be a reasonable piece of functionality to have. The other should be properly internationalized text for the labels in the selector of colors, which are currently just hard coded in the code source in English.