Provide a path to start (record) in a file dialog box

Similar Questions

• Folder path with all of the listed files dialog box

  Hello

  Someone here is an ActiveX control, or a workaround to have a folder of dialogue path which also shows the files in the folders? File LV dialog box displays only records if limit you the selection of records.

  Ideally, the browser would look like the browser folder with the "Select a file" button, but would also show the files in the folders. One solution would be to activate the files and folders and simply get rid of the file name of the path if they choose 'Open' instead of 'Current folder', but it's not ideal.

  This isn't the ideal solution because it allows the user to select files and folders, but he re - opens the dialog box if they do.

  

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• Special features of loaing/record file dialog boxes

  I describe here, I'm going to build a web video on Adobe Flex game. I load and save files with the FileReference load() and save() methods. I have two quick questions about them on the specifics:

  Learn how to save dialog box (which is FileReference.save ()) to use only a certain file extension? (I did already with the loading.)

  How can I make the dialog boxes open a folder of some (like "C:/games/myGame / '), rather than the system default folder?

  Thank you!

  Documentation:

  You can specify a default file for recording method name

  When the file is saved successfully, the properties of the FileReference object are populated with the properties of the local file. The complete event is dispatched if the backup is successful.

  The FileReference and FileReferenceList classes do not let you set the location of the default file to the dialog box that the browse() or download() methods generate.

  The default location shown in the dialog box is the file most recently accessed, if that location can be determined, or the office.

  The classes you cannot read or write to the transferred file.

  They don't allow the SWF file that initiated the upload or download to access the uploaded or downloaded file or the location of the file on the disk of the user.

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• Dialog box of the file in the application that is running in window 7 shows all of the UNC path

  HELP PLZ!

  We use the file dialog box to open the folder of the disk file network hard. Window XP showed the path UNC path, but when we run our application (developed in vba) on window 7, full unc path has been established instead of only last name of the folder.
  example of... UNC path \\abcd\abb\abfolder in window XP file dialog shows "abfolder" and then if we see in looking in then hierarchical set of path can be seen
  but the file in window 7 dialog box shows all the way "\\abcd\abb\abfolde" as it is...
  Please suggest if some way where we can display in the file dialog box in the window 7 same folder in UNC path that showed before in XP.
  Hi Gary,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with an application developed in Visual Basics for Applications running.

  The question you posted would be better suited in Visual Basics for Applications MSDN Forums. I would post the query in the link below.
  http://social.msdn.Microsoft.com/forums/en/isvvba/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How DO I start recording in lenovo x 3 automatic calls Marshmallow vibe update

  HOW to start recording in lenovo Marshmallow vibe x 3 update, please help this because it was possible in the version of lollipop of Appeal set but now I m not able to get this parameter in marshmelow automatic update calls.

  Thank you very much for that answer pavlo I found the solution

• When loading Windows XP Media Center Edition 2005, my Lifecam Webcam from Microsoft HD turns on and starts recording.

  Original title: Okay, I bet no one has ever heard of it...

  At the Media Center 2005 Rollup 2 loads, my Lifecam Microsoft HD Webcam turns on and I guess that starts recording. WHAT? What is happening with this? I have Windows XP Media Center Edition 2005, SP3.

  Hello

  -Did you change on your computer due to which the question has begun?

  I recommend you to start your computer in a clean boot State and turn off Microsoft Lifecam Webcam to run at startup HD.

  Note: Don't forget to restart your computer in normal mode by following the steps described in the article.

• No network has agreed the provided network path

  Hi all

  I have a network of "Working group" composed of two XP Pro PC, a XP Pro laptop, a network printer and a router Linksys (BEFSR41) attached to a Wireless Linksys (WRT54G) router.  All PC's are running
  identical versions of protection ESET, WIN XP Pro, etc.

  When wired, every PC can access the internet, can share (explores/delete/copy/move, etc.) of files, can access the printer, etc..  In other words, they work as they are supposed to.

  When you use the connection Wireless on my laptop, it's different.  The laptop can access to internet and printer, but none of the two PC.  Also, none of the two PC can access the laptop either.  When I try to explore (Windows) wireless, or if I try to communicate with the PC in any other way, I get the message error 'no network did accept the provided network path '.

  I searched on the web and even tried the stuff that has no sense ("turn print files sharing & '...) If it were not already activated then why it would work when wired?).  I even tried a new wireless router with the same results.  Again, everything works as expected when cables.

  The ONLY time I was able to access the shared files on every PC wireless was when I turned off the wireless security.  In other words, if I turn off the key WEP/WPA/etc. of the wireless router, THEN I can do everything I could when wired wireless.  I don't feel comfortable in this regard ;-).

  I didn't used to have this problem so I suspect it may have been caused by Windows software update or security.

  Someone please offer suggestions of what I could try to fix this? I would surely appreciate!

  Is ' all remember in the movie "Jumping Jack Flash" where
  Whoopie Goldberg was given to the riddle "what is the KEY? '?

  IT IS CORRECTED! Now, the bad news... I am not sure whether
  set by one, or a combination of things (and don't have the)
  time to revisit every step, one at a time, to determine).

  First of all, I have disabled dynamic DHCP on the router and then tried to
  give a fixed IP address to each device on the network. Since I was
  am not a magician, I can not done correctly.
  Believer, I took unnecessary devices out of the network
  now that a desktop PC and laptop. Everything that
  has worked properly wired, but not wireless. This
  eliminated the DHCP server as the cause.

  I also tried static IP addresses with MAC filtering. Even
  result.

  It was suggested to use the router installation disc
  in the laptop, making sure what was the ONLY PC attached to
  the router set up. I decided to wipe it off, restart
  from scratch and a router reset (to factory specifications).
  Using the drive led me to unexpected errors in communication
  When installing... I must have tried three times before
  have the installation go properly due to a notch or
  another being incorrect on the laptop. I'm not sure to this
  point to know if the settings have been changed during testing or
  before that the problem surfaced first. I'm sorry. :-(. In any case, after
  the installation went through, I was back to square one with
  the same results and it was time to implement a
  Routine Diagnostic basis of strategy!

  Remember I mentioned in my OP that I disabled the
  security without wire, then everything worked? It was my
  main index. The router instruction manual * clearly *.
  indicates that the network will run as expected if the
  the router security key does not match the security key
  used in wireless devices (laptop). I must have read that
  100 times.

  In the router under Wireless Security Setup window
  It offers a choice of security key for "Disabled", "WPA."
  ("Personal", "WPA-Enterprise", "WPA2 Personal", "WPA2)
  Company', 'RADIUS' and 'WEP '.

  On the laptop, in the "Properties".
  File Association tab there is a drop down menu to
  'Network authentication '. Here, I can choose a security key
  of 'Open', 'shared', "WPA", "WPA - PSK", "WPA2" or "WPA2-PSK.

  This is where it gets confusing. Apparently, there is a
  difference between what the router calls a security key and
  What laptop called a key... In other words, security
  the key of the router offers are not * identical * to the
  choice of laptop. After learning what are the differences each
  security key was, I determined "WPA Personal" is not the same
  like "WPA - PSK". "PSK" is not equal "Personal" means
  "Pre-shared Key". My bad. How stupid of me to not assume that
  the names were different! Why are there no uniformity between
  that the router offered and what are the choices has had the laptop?

  Knowing 'Disabled' (called 'Open' in the laptop - see the)
  similarity?) worked, I tried the next enhanced security
  key, 'WEP '. That selection offered some protection but not
  everything worked! Then I tried "WPA" then "WPA - PSK", etc.
  until I found (what I believe to be) the only security key
  to work properly... "WPA2 Personal" on the router and "WPA2".
  in the laptop (SAME aspect you?) allowed me to do
  all that I could do wired! I had assumed
  erroniously, that if the next highest security key does not
  work, none would be. I was wrong!

  Weird: I believe in my frustration, before
  by selecting the WPA2 key, I'm distracted me and I ran the
  Assistant wireless network on the desktop PC. Keep in mind
  This PC has no wireless card. After having 'done '.
  with success", I explored the laptop and vice versa
  Wireless! This step may or may not be the "KEY" to all the
  the long, sorry.

  BTW, I think it was "D" (the key the song was written in)
  ;-))).

• Go live - invited to provide details to create a "record."

  I don't know where to post this question, so please forgive me if I chose the wrong forum.

  I have a client who has an old site with their own website hosting and email hosting.

  They want to continue to use their current by email once we go live with BC.

  I see that in the admin of BC under "Site", I can add an MX record to point to their own mail server, but their techo all tell me their configuration is bound in the field and if Adobe now manages the DNS, then it will prevent their existing emails from work. Perform a whois on their domain that I see that their current configuration is hosted by Colo4.

  So instead of configure DNS with Adobe they have asked me to provide details to create a record of their side to point to the new site of BC.

  Is this possible and if so where can I find the details to provide them?

  Hello

  Recording media pointing only web traffic for the domain on the site of BC.

  You do not configure the areas in British Colombia to be in British Colombia.

  Configure the external domain configuration and provide to the person who manages your domain name with the registration information.

  The two options are explained here:

  Add a domain name to your site by using an external DNS service

• Cannot save the schema using the client - crashes ' start record contour.

  All,

  I use version 9.3.1 (yes I know we should be upgraded) and EAS installed on my machine (not web-based version).  For some reason, my computer crashed last week so I had to reinstall EAS.  After I did, I started having the problem of not being able to save a scheme and it gets stuck on the "start record sketch."

  It is not a java problem, that I'm not using the web browser.  In addition, a colleague has the same version of java and isn't in trouble. Also, I got this version of java (1.6) on my machine for months.

  Any ideas.

  Thank you

  Check: Cannot save the schema with Essbase Administration Services and Version Java JRE 1.6 (Doc ID 847487.1)

  It indicates that the client computer does not have the supported JRE versions.

• CS5 - sub commands Start Recording and play recorded command grayed out

  How can I activate "Start Recording" and "play recorded command? Please and thank you...

  Sorry to be so stupid, the feature has been removed from the latest versions of Dreamweaver. The recoding and reading refers to a macro that you can create to automate tasks within DW.

  Take a look here help Dreamweaver | Task automation

• Record to the file of the measurement at will

  Hello.

  I'm new to LabView and so far it has been easy enough to learn this software. I like really I. I use a USB-1208FS MCC to measure signals from the real world and enjoy to LabVIEW.

  The thing is I want to be able to save to a file of measure at will. That said, when I press the Start button, it will start measuring but DO NOT save data to the file measure until I touched another button, a "record" button This is when I want to save the data. Is it possible to implement in LabVIEW? Because as soon as I start sampling that he recorded in the file of measures.

  Should which functions I use? I'd appreciate any help.

  Thank you!

  Pretty simple with a case statement.

  I recommend you:

  3-hour course

  6 hour course

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows didn't start because the following file is missing or corrupted \windows\system32\config\system

  Windows windows xp could not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
  Select 'r' in the first screen to start repair

  I don't have original cd so I downloaded from the internet.  Only 1 cd when the instructions said it would be 6. that didn't work

  tillieme,
  You will need a valid XP disc to run the repair.  It is possible that the PC manufacturer develop a recovery hard disk partition.  You should check with them to see if it's an option.  Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.