auto logout

Similar Questions

• Skype Auto logout

  Hello

  My Skype has recently begun to disconnecting me automatically 5 seconds after I log in. I have the latest version (6.20.0.104) installed. I tried to reinstall, but the same problem occurs. My Skype account is linked with my Microsoft account that was recently blocked by Microsoft as anyone else was. I can not get unblocked because I have enough information to fill out the form because I was not able to get more than a month because he asked me to verify my identity, then wait a month for the confirmation email, but after a month he asked me to do the same thing again. If needed I can provide my email address and my password.

  Kind regards

  Gamer rage

  

  http://heartbeat.Skype.com/2014/09/i_keep_getting_signed_out.html

  Open your Skype account setup page:

  https://secure.Skype.com/portal/account/settings

  If your Skype account is bound with the Microsoft account, then try to separate them.

  https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts

• Netflix BDVN790W question/auto logout

  OK, so I got the system of House BDVN790W cinema for a while now without any problems.  Recently, I connected to Netflix and tried to watch a movie.  When I started the original buffer, it comes to the "Home screen", out me of Netflix.  It doesn't really bother me that much except that my Netflix login information are not put in cache/memory.  I have to go with the distance every.single.time.  I had to do it 3 times just to watch anything at all.  I have lost over 15 minutes, just try to make the film.

  I called customer service and the individual that I talked to was distraught and less well informed of the problem as me.

  I tried the things:

  -Unregister the device through Netflix using up, up, down, down, left, right, left, right, upward, upward, upward, upward.

  -Disconnect the power supply for 15 seconds.

  -Factory reset (this doenst work.  The factory reset freezes up and will not be finisih, leading me to believe that my camera is somehow screwed up.)

  -Reset network and re - connect to my router.

  If anyone has a solution I would be extremely grateful.  I'm at the point where it is also a disadvantage that I can end up buying a separate device for streaming.

  I had the same problem. I spent 50 minutes on hold and with a customer service representative who was also distraught. He hung up on me when I asked to speak to a Manager.  There must be a problem with Sony because I don't have the paper in question with my laptop or tablet.

  In addition, I had the same factory, set questions again and I realized that you can re - define each specific item and will not freeze the system but he has not planned the question.

  I've been waiting using live for 20 minutes of waiting now for them to connect to a technician.

  Good luck.

• Dell Wireless 1705 Bug! * NOT YET FIXED

  Hello...

  I have a serious problem with my internet connection while using WiFi

  When ever I try to connect to my network is works fine no problems at all

  but after a few minutes, that it's just auto logout and I have to reconnect again

  I don't know why

  I tried to change the version of my windows with fully formatted drive, but it's not helping

  and I also tried to replace the pilot network in 1704, but it's not help ether

  and I'm running on windows 8

  with the latest network driver (Dell Wireless WiFi + Bluetooth 1705)

  and my laptop Dell 3537

  Please someone help me I can't play games online or do anything on the internet

  I had the same problem. simply, I opened the Device Manager and selected the wireless card. I have selected and update device driver, select manually look. then select looking for the existing pilot uncheck search only compatible driver, dell select list and the pilot who has worked great for me has been the dell 1702. has not declined since. Good luck.

• How to set the time of disconnection in APEX 4.2.5

  The time of disconnection from the APEX is short for me, how to set or disable auto logout?

  Jerry:

  Connect to 'internal' working space and go to:

  Home--> Manage Instance--> security

  and you will see the following change:

  For Application Express session timeout...

  Aqua

  Session for the Express request timeout

• You can configure automatic disconnection of a secure area at the exit of the Muse page?

  Hi people,

  Is there a way of setting upward an autodisconnect to muse page output?

  Rather disconnect manually I want the customer to be automatically disconnected when leaving the page.

  Ciao

  Cathy

  Surely, you can look into other options than PHP.

  Whenever a new page is loaded and logged, the session is created. You can store the time in a session variable, and then check that it has not exceeded a certain limit since the last time that a user saw a page.

  You can try JavaScript etc., take a look at these threads for more details:

  http://StackOverflow.com/questions/23023916/JavaScript-auto-logout-code

  http://StackOverflow.com/questions/22471896/automatically-logout-from-page/22471948

  http://www.scriptcase.NET/forum/forum/applications/control/1888-how-to-auto-logout-after-1 0-min-idle-time-% 7Bhelp %7 D

  Thank you

  Sanjit

• Workspace 11.1.2.1.0.83 - change Timeout?

  Hello
  I am trying to modify the time-out on the workspace (v11.1.2.1.0.83 by the help |) About...) and followed the instructions in this thread: Re: workspace Session Timeout
  
  After stopping and restarting the system, test the timeout indicates that it is always the default value of 30 minutes (despite checking the settings under Navigate |) Administer | Server to the workspace settings and seeing 60 minutes he was settled in). Audit in Shared Services as this blog suggests (http://rednivhkus.blogspot.ca/2012/05/oracle-epm-auto-logout-time-or-hyperion.html) confirms that the Session Timeout is set to 60 minutes and Keep-Alive in 10 minutes.
  
  I also checked my registry settings and tried using the reg key blank to ignore it, but to no avail (more this road would not be deployed for our end users in any case)
  
  Is there anything else that might affect the timeout on the workspace?
  
  Thank you!

  Better check all documents in the link I posted above, but the basic tips of the Doc 583878.1 are:
  -----
  Increase setting timeout for the web sessions on the HFM website

  In normal scenarios, increase the session timeout can cause performance issues; as more sessions 'dead' are kept open much longer, more processing power is wasted on them. Some have long time-outs session is also bad (in general) considered as practice from a security point of view.
  Note that these waiting times are only applied to inactive sessions, i.e. when the user is not "any what to click' during this time. For this reason, they rarely need to be a value greater than 120 minutes.

  The following steps change the default timeout of 20 minutes to 30 minutes in Microsoft Internet Information Services 6 (IIS):
  1. go to start > all programs > administrative tools > Internet Information Services (IIS) Manager.
  2. expand the server (local computer) node.
  3. right click on the application pool node.
  4. Select Properties.
  5. Select the performance tab.
  6. change the value of timeout from 20 to 30 minutes.
  7. click on apply.
  8. click on OK.
  9. expand the Web Sites node.
  10. right click on the web site of "HFM.
  11 go in properties > Home Directory tab > settings button > Options tab.
  12. change the Enable session state > 20-30 minute Session timeout value.
  13. click on OK.
  14. click OK.
  15 check that the timeout is now the new value.

• Redirect a session timeout in ASP.

  Hello
  
  I built a client area for my site which is accessible to clients only. The information displayed in a database are important (for example the passwords and phone numbers), I need the session timeout and redirect. I have successfully created this code which works like a treat:
  
  < %
  Session.Timeout = 3
  % >
  
  As timeout only page but used redirects them, just at the moment where they're trying to go to a page that is used by the connection, it will be will give them an access denied page.
  I came up with this script so that it would redirect them, at the end of the session so that no one can view information about the current page:
  
  < %
  If Session.Timeout = 1 then
  Response.Redirect ("pagetimeout.asp")
  end if
  % >
  
  but this doesn't seem to work.
  but who doesn't either. I'm really tired. I use NO ASP ASP.NET.
  
  I would really appreciate help with this because it is very important for security reasons.
  
  Thanks in advance, Adz
  
  I saw on a Web page that it worked:
  

  OK I solved this by simply putting a HEAD of refresh tag in my template so after 180 seconds (3 minutes) y page redirects to my auto logout page presentation. That's what I wanted to achieve so that when a user leaves and forgot to sign out, then the page will record the automatically, as long as the user is not refreshing the page, I'll be fine! :)

  What I have to do now is to stop people from just close the browser and click the link "logout".

  Thanks for your help, Adam

• Stop auto play of video in Safari on the Sierra?

  I upgraded to Sierra and I used to be able to use a fantastic extension called ClickToFlash, which would replace all the Flash on a web page with a white window and I would click above to load the Flash content.

  This extension does not work on Sierra I am looking for an alternative.

  In my view, there ClickToPlugin but after installing it, YouTube videos are all black screens and I do not see the drop down choices of media. So it seems that it is watered.

  I can't use Safari if I can't stop Auto playing every single video on each web page. Anyone know anything else?

  Thank you!

  He can still work... try this.

  Open system preferences > Flash Player and select the Advanced tab, and then click clear all under settings and navigation data.

  Then quit and relaunch Safari and then test ClickToFlash.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Search iPhone settings for "Auto-Lock" does not work

  Hello

  Does anyone know why the Auto-Lock setting is not to be found when you use the search at the top of the main settings page.

  From time to time, when I'm on a conference call, I like to set the auto-lock on 'Never', so I can leave the visible main phone screen to mute/one-mute the call without having to unlock the phone. I have the memory of a goldfish, so I do not remember that it is in the section "Viewing and brightness" and that is why I use the search at the top of the main settings page field. I would normally enter 'Auto', and it would be "Auto-Lock" for me.

  Since the release of iOS10, the la recherche search can't find this definition more although it still is in the section "viewing and brightness.

  The search for other settings seems to work, but it seems that it is just this one, but I have not actually tried too.

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Thank you

  B1GPappaSmurf wrote:

  Any ideas on what is happening and how I could get to find the Auto-Lock in the future?

  Seems to be a bug, so nothing you can do but remember where the parameter is and report the bug:

  http://www.Apple.com/feedback/iPhone.html

• Cannot disable Auto-capitaliser

  On my iPad in iOS 10.0.02, even after I turn off in the settings, guard Auto-capitaliser capitalize what he thinks is the first word of a sentence. How can I fix it? I restarted apps and the unit.

  Interesting. I never thought that button worked but I am test it and it turned off my auto-caps.

  Start simple with a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

  If the reset does not try the settings > general > reset > reset all settings. You will lose any info, but you have to reenter your wifi access code.

• Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

  Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?

  You will find the auto lock settings in settings > display and brightness.

• How to stop Auto-start for videos

  Videos in Safari auto-start now. I would like to stop this function.

  It is a function of the site, so it is not that you can do.

• Why auto unlock Mac with Apple Watch stop working?

  When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

  Your Apple Watch is unlocked?