AUTO TUNGSTEN E2
I have a Palm Tungsten E2 portable that you does not stop. When I disable it, it restarts in 10 seconds. Any suggestions on how to prevent him from doing this. It is the opposite of the power save option.
First thing to try is to press the Reset button at the back of the unit.
Tags: HP Tablets
Similar Questions
-
I've been a photographer for these last years, and it's the first time I have encountered this problem. I shot an event for a couple (reception) and I didn't have my grey card, so I put my Canon 5 d mkII on the white balance automatic (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4, if it helps). As you will see on the photos of two examples - photos taken in the conference hall was going well, but the Favorites of the event itself were surprisingly saturated. The room had a ton of very bright uplighting in purple and pink - the shooting was going on in the viewfinder, but once I got them in the LR4, there was an almost complete cast of violet/rose above it all. Adjustment of the balance of whites in LR for auto, tungsten, fluorescent - nothing has worked. Adjust the temporary sliders - only a little better. Reducing the vibrance and saturation has helped a little more, but I really find a solution! I can't afford to pay back their money, but if I can't find a decent solution, I'll do it. I want to give them the best possible color correction, but I'm pretty new to LR and I could use some help. Just to be clear, I'm not looking for a link to a tutorial on how to adjust the white balance - I read all the... I'm hoping by using someone who has experienced this same thing or can still offers advanced solutions that "try to set the sliders more» Thank you in advance!
http://i.imgur.com/dCda964.jpg
http://i.imgur.com/uGoEuiB.jpg
This isn't a matter of White Balance, and you will not be able to adjust this image with the settings of white balance only - either behind closed doors or in Lr.
You shot this photo in colored light, and the effect you looks as if you want a fancy color filter in front of your lens.
I doubt if it can be adjusted to a 'normal' image looking at all. But for all its worth, here are the best I could come up with – even if I don't say it's THE best, in fact, it is still severely lacking.
And here's screenshots of the settings I used. I found that the most promising "adjustments" were in the calibration Panel. If you play a little bit maybe there is a better solution.
The image has a severe cast of purple, which is a red and blue combination. Increasing green will help. That is why I put the slider dyed in Basic-100.
In the calibration Panel, I put the still green hue, reduces the saturation of red and blue and changed the shades. Finally, in HSL, I reduced the saturation of blue.
PS: I think that the advice of Lee Jay is good. Create your own profile for counterweight in light color.
Post edited by: web-Weaver: added PS
-
A friend has the full menu but mine seems to have missed!
Completely new to LR5 not sure if I need to grab has an extra / upgrade... somewhere?
Thanks in advance
Full white balance options are only available for raw files. I bet yours are jpeg, or tiff or something (not raw), right?
-
Why lightroom offers is no longer me cloudy, tungsten, white balance etc?
Why in the lightroom white balance I have such auto and personal (it cloudy, tungsten... etc!) thanks for your help
Because, surely, not is it a raw file. All white balance options are only available to pour the raw files.
-
Disabling Palm Tungsten E2 problems
My 3 year old Palm Tungsten worked perfectly until yesterday. It is password protected and set to Auto Lock on power off. The power is set to turn off after 3 minutes. The problem is that if turned off manually it turns on automatically after 10 seconds. (password function intact) and only turns off automatically after 3 minutes. Change the automatic time setting makes no difference to the problem. The problem occurred after a HotSync, but this may have been a coincidence. I can find a number of postings on problems with "light", but none with power off! Can anyone help?
Thank you.
Search for any appointments or tasks that are stretching from the end of December in the new year, especially with a reminder that overlap 12/31 - 1/01.
Delete the appointment and see if the problem goes away.
(I remember hearing this complaint before).
WyreNut
Message edited by WyreNut on 03/01/2009 17:34 -
Stop auto play of video in Safari on the Sierra?
I upgraded to Sierra and I used to be able to use a fantastic extension called ClickToFlash, which would replace all the Flash on a web page with a white window and I would click above to load the Flash content.
This extension does not work on Sierra I am looking for an alternative.
In my view, there ClickToPlugin but after installing it, YouTube videos are all black screens and I do not see the drop down choices of media. So it seems that it is watered.
I can't use Safari if I can't stop Auto playing every single video on each web page. Anyone know anything else?
Thank you!
He can still work... try this.
Open system preferences > Flash Player and select the Advanced tab, and then click clear all under settings and navigation data.
Then quit and relaunch Safari and then test ClickToFlash.
-
Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"
I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?
An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.
It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?
-
Search iPhone settings for "Auto-Lock" does not work
Hello
Does anyone know why the Auto-Lock setting is not to be found when you use the search at the top of the main settings page.
From time to time, when I'm on a conference call, I like to set the auto-lock on 'Never', so I can leave the visible main phone screen to mute/one-mute the call without having to unlock the phone. I have the memory of a goldfish, so I do not remember that it is in the section "Viewing and brightness" and that is why I use the search at the top of the main settings page field. I would normally enter 'Auto', and it would be "Auto-Lock" for me.
Since the release of iOS10, the la recherche search can't find this definition more although it still is in the section "viewing and brightness.
The search for other settings seems to work, but it seems that it is just this one, but I have not actually tried too.
Any ideas on what is happening and how I could get to find the Auto-Lock in the future?
Thank you
B1GPappaSmurf wrote:
Any ideas on what is happening and how I could get to find the Auto-Lock in the future?
Seems to be a bug, so nothing you can do but remember where the parameter is and report the bug:
-
Cannot disable Auto-capitaliser
On my iPad in iOS 10.0.02, even after I turn off in the settings, guard Auto-capitaliser capitalize what he thinks is the first word of a sentence. How can I fix it? I restarted apps and the unit.
Interesting. I never thought that button worked but I am test it and it turned off my auto-caps.
Start simple with a reset. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.
If the reset does not try the settings > general > reset > reset all settings. You will lose any info, but you have to reenter your wifi access code.
-
Updated my phone to iOS 10.0.2. The auto lock feature disappeared from the General settings. Where is it now?
You will find the auto lock settings in settings > display and brightness.
-
How to stop Auto-start for videos
Videos in Safari auto-start now. I would like to stop this function.
It is a function of the site, so it is not that you can do.
-
Why auto unlock Mac with Apple Watch stop working?
When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.
Your Apple Watch is unlocked?
-
How the auto uppercase the first letter of each sentence
I use the latest version of the Pages on the Sierra of the OS and I am trying to find a way to automatically capitalize the first letter of each sentence with nothing doesn't. I've been a user of Pages for years and every time announced a new update is all what I care about is adding this feature simple but important. So, now that the new update is here I can not yet understand how to take advantage of the auto and I can't find workarounds online to help me do it. Any idea?
You can use WordService from DEVONtechnologies, free in the Mac App Store. You can then go to System Preferences > keyboard > shortcuts > Services & enable those you want. You can then select the text you want to apply the service to & go to Pages > Services & select initial caps of sentences. It is also possible to assign a keyboard shortcut to services. With the help of this device, or similar functionality in any word processing application still not to revert to words in a sentence that should be capitalized as 'I' or pronunciations. You will also have the problem of it capitalized words after the period for the abbreviation.
I do it the traditional way, using the SHIFT key when necessary. It is advisable to learn to type using the SHIFT key, rather than relying on the software to do it for you. Just like the use of a spellchecker. It's good, but it will not go back on the words that are spelled correctly but not the correct spelling of the situation.
-
Dear support team Apple,
I have problem with MacOS Sierra feature "Auto Unlock with Apple Watch". I upgraded my MacBook Pro 2015 until the latest Version of the OS and Apple Watch until the OS 3.
I followed the instructions automatically unlock your Mac with your Apple Watch - Apple Support
As a result:
1. two factor authentication enabled on iCloud account;
2. pass code activated on Apple Watch;
3. I use iCloud even on Mac and on the watch.
But the option is not in the system preferences. Attached printscreen.
I have exactly the same problem. I checked that I have two factor, not two steps of authentication. I have a the same devices, 6 2015 s of MacBook Pro, Apple Watch and iPhone more. The option does not appear for me either.
-
Turn on auto cannot unlock with Apple Watch
Hi guys,.
I need help here. I'm on macOS Sierra on a MacBook Pro (retina, 13 inches, end of 2013). I actually had auto unlock with my Apple Watch two days ago. But then I did a stupid thing yesterday and had to restore the MacBook OSX Maverick and re-upgrade to Sierra. I can't activate longer auto unlock with Apple Watch now and it's really frustrating.
Thanks in advance for your help.
Don't feel alone, there are a lot of problems. Very inconsistent behavior.
Requirements for continuity on Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support
http://www.CultofMac.com/441405/how-to-use-Apple-watch-to-unlock-your-Mac-in-Mac os-sierra.
Maybe you are looking for
-
Can't play music on the AirPort Express to the iPhone 5 s. Can of Macbook Pro
Can play music through the AirPort Express using a Macbook Pro and Linksys 11879. Two iPhone 5 see the connection at the airport, but no music. How do we get music using the iPhones?
-
upgrade account icloud by cash
-
where can I get a list of all services in Win XP and how they should be handled?
I use Windows XP Pro Media Center edition 2005. For example, I use 8. Since I changed my services on this computer is super slow. I got the list from a Microsoft site. What start up programs should also be checked?
-
received alarming call of guy who claims to be from one of the free services of Windows
Hello, just got a phone call from a guy with an accent Middle-Eastern or Indian. He said that he was working for Windows and this call is a free service of help me solve an immediate threat to my computer system. He said that they had seen errors com
-
Latest version of the BIOS for m1070n Media Center PC?
My PC will start if I have 512 MB or RAM charge (2-256 MB DIMM), but when I add 2 - 1 GB DIMM modules, it starts to boot and then displays the blue screen, saying: a program attempted to access or release memory that it doesn't have permission to acc